Continuous-wave highly-efficient low-divergence terahertz wire lasers.

Terahertz (THz) quantum cascade lasers (QCLs) have undergone rapid development since their demonstration, showing high power, broad-tunability, quantum-limited linewidth, and ultra-broadband gain. Typically, to address applications needs, continuous-wave (CW) operation, low-divergent beam profiles and fine spectral control of the emitted radiation, are required. This, however, is very difficult to achieve in practice. Lithographic patterning has been extensively used to this purpose (via distributed feedback (DFB), photonic crystals or microcavities), to optimize either the beam divergence or the emission frequency, or, both of them simultaneously, in third-order DFBs, via a demanding fabrication procedure that precisely constrains the mode index to 3. Here, we demonstrate wire DFB THz QCLs, in which feedback is provided by a sinusoidal corrugation of the cavity, defining the frequency, while light extraction is ensured by an array of surface holes. This new architecture, extendable to a broad range of far-infrared frequencies, has led to the achievement of low-divergent beams (10°), single-mode emission, high slope efficiencies (250 mW/A), and stable CW operation.

Frequency and amplitude modulation of ultra-compact terahertz quantum cascade lasers using an integrated avalanche diode oscillator.

Mode-locked comb sources operating at optical frequencies underpin applications ranging from spectroscopy and ultrafast physics, through to absolute frequency measurements and atomic clocks. Extending their operation into the terahertz frequency range would greatly benefit from the availability of compact semiconductor-based sources. However, the development of any compact mode-locked THz laser, which itself is inherently a frequency comb, has yet to be achieved without the use of an external stimulus. High-power, electrically pumped quantum cascade lasers (QCLs) have recently emerged as a promising solution, owing to their octave spanning bandwidths, the ability to achieve group-velocity dispersion compensation and the possibility of obtaining active mode-locking. Here, we propose an unprecedented compact architecture to induce both frequency and amplitude self-modulation in a THz QCL. By engineering a microwave avalanche oscillator into the laser cavity, which provides a 10 GHz self-modulation of the bias current and output power, we demonstrate multimode laser emission centered around 3 THz, with distinct multiple sidebands. The resulting microwave amplitude and frequency self-modulation of THz QCLs opens up intriguing perspectives, for engineering integrated self-mode-locked THz lasers, with impact in fields such as nano- and ultrafast photonics and optical metrology.

THz saturable absorption in turbostratic multilayer graphene on silicon carbide.

We investigated the room-temperature Terahertz (THz) response as saturable absorber of turbostratic multilayer graphene grown on the carbon-face of silicon carbide. By employing an open-aperture z-scan method and a 2.9 THz quantum cascade laser as source, a 10% enhancement of transparency is observed. The saturation intensity is several W/cm2, mostly attributed to the Pauli blocking effect in the intrinsic graphene layers. A visible increase of the modulation depth as a function of the number of graphene sheets was recorded as consequence of the low nonsaturable losses. The latter in turn revealed that crystalline disorder is the main limitation to larger modulations, demonstrating that the THz nonlinear absorption properties of turbostratic graphene can be engineered via a proper control of the crystalline disorder and the layers number.

THz waveguide adapters for efficient radiation out-coupling from double metal THz QCLs.

We report the development of on-chip optical components designed to improve the out-coupling of double-metal terahertz (THz) frequency quantum cascade lasers (QCLs). A visible reshaping of the optical beam is achieved, independent of the precise waveguide configuration, by direct incorporation of cyclic-olefin copolymer (COC) dielectric optical fibers onto the QCL facet. A major improvement is further achieved by incorporating a micromachined feed-horn waveguide, assembled around the THz QCL and integrated with a slit-coupler. In its first implementation, we obtain a ± 20° beam divergence, offering the potential for high-efficiency radiation coupling from a metal-metal waveguide into optical fibers.

Photonic quasi-crystal terahertz lasers.

Quasi-crystal structures do not present a full spatial periodicity but are nevertheless constructed starting from deterministic generation rules. When made of different dielectric materials, they often possess fascinating optical properties, which lie between those of periodic photonic crystals and those of a random arrangement of scatterers. Indeed, they can support extended band-like states with pseudogaps in the energy spectrum, but lacking translational invariance, they also intrinsically feature a pattern of 'defects', which can give rise to critically localized modes confined in space, similar to Anderson modes in random structures. If used as laser resonators, photonic quasi-crystals open up design possibilities that are simply not possible in a conventional periodic photonic crystal. In this letter, we exploit the concept of a 2D photonic quasi crystal in an electrically injected laser; specifically, we pattern the top surface of a terahertz quantum-cascade laser with a Penrose tiling of pentagonal rotational symmetry, reaching 0.1-0.2% wall-plug efficiencies and 65 mW peak output powers with characteristic surface-emitting conical beam profiles, result of the rich quasi-crystal Fourier spectrum.

Interaction between meta-materials and shallow donors in bulk GaN at THz frequency.

We report the coupling and interaction between shallow donors and microcavities in bulk GaN at THz frequencies. At 4K, the shallow donors lead to an absorption at 23.5 meV (5.7 THz) under optical pumping above the bandgap of GaN. The microcavities are based on metamaterials and are designed to resonate around 5.7 THz. At 4 K, the matter-cavity interaction is clearly demonstrated on differential transmission of the sample. The cavity resonance shifts when the absorption occurs. Our model and simulations are in good agreement with the experimental data.

Ultrastrong coupling regime and plasmon polaritons in parabolic semiconductor quantum wells.

Ultrastrong coupling is studied in a modulation-doped parabolic potential well coupled to an inductance-capacitance resonant circuit. In this system, in accordance to Kohn's theorem, strong reduction of the energy level separation caused by the electron-electron interaction compensates the depolarization shift. As a result, a very large ratio of 27% of the Rabi frequency to the center resonance frequency as well as a polariton gap of width 2π × 670 GHz are observed, suggesting parabolic quantum wells as the system of choice in order to explore the ultrastrong coupling regime.

Low divergence Terahertz photonic-wire laser.

Edge emitting, terahertz quantum cascade photonic-wire lasers, based on a third order Bragg grating are presented. Devices with a power consumption as low as 300mW, with a single frequency output power of more than 1.5mW are demonstrated. Their maximum operating temperature in continuous-wave mode operation is 110K and the emission is concentrated in a narrow beam (~30 degrees divergence). Larger structure based on the same design show more than 10mW output power and more than 200mW/A slope efficiency at 10K continuous-wave operation.