Designed Y3+ Surface Segregation Increases Stability of Nanocrystalline Zinc Aluminate.

The thermal stability of zinc aluminate nanoparticles is critical for their use as catalyst supports. In this study, we experimentally show that doping with 0.5 mol % Y2O3 improves the stability of zinc aluminate nanoparticles. The dopant spontaneously segregates to the nanoparticle surfaces in a phenomenon correlated with excess energy reduction and the hindering of coarsening. Y3+ was selected based on atomistic simulations on a 4 nm zinc aluminate nanoparticle singularly doped with elements of different ionic radii: Sc3+, In3+, Y3+, and Nd3+. The segregation energies were generally proportional to ionic radii, with Y3+ showing the highest potential for surface segregation. Direct measurements of surface thermodynamics confirmed the decreasing trend in surface energy from 0.99 for undoped to 0.85 J/m2 for Y-doped nanoparticles. Diffusion coefficients calculated from coarsening curves for undoped and doped compositions at 850 °C were 4.8 × 10-12 cm2/s and 2.5 × 10-12 cm2/s, respectively, indicating the coarsening inhibition induced by Y3+ results from a combination of a reduced driving force (surface energy) and decreased atomic mobility.

Atomistic Simulation Informs Interface Engineering of Nanoscale LiCoO2.

Lithium-ion batteries continue to be a critical part of the search for enhanced energy storage solutions. Understanding the stability of interfaces (surfaces and grain boundaries) is one of the most crucial aspects of cathode design to improve the capacity and cyclability of batteries. Interfacial engineering through chemical modification offers the opportunity to create metastable states in the cathodes to inhibit common degradation mechanisms. Here, we demonstrate how atomistic simulations can effectively evaluate dopant interfacial segregation trends and be an effective predictive tool for cathode design despite the intrinsic approximations. We computationally studied two surfaces, {001} and {104}, and grain boundaries, Σ3 and Σ5, of LiCoO2 to investigate the segregation potential and stabilization effect of dopants. Isovalent and aliovalent dopants (Mg2+, Ca2+, Sr2+, Sc3+, Y3+, Gd3+, La3+, Al3+, Ti4+, Sn4+, Zr4+, V5+) were studied by replacing the Co3+ sites in all four of the constructed interfaces. The segregation energies of the dopants increased with the ionic radius of the dopant. They exhibited a linear dependence on the ionic size for divalent, trivalent, and quadrivalent dopants for surfaces and grain boundaries. The magnitude of the segregation potential also depended on the surface chemistry and grain boundary structure, showing higher segregation energies for the Σ5 grain boundary compared with the lower energy Σ3 boundary and higher for the {104} surface compared to the {001}. Lanthanum-doped nanoparticles were synthesized and imaged with scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) to validate the computational results, revealing the predicted lanthanum enrichment at grain boundaries and both the {001} and the {104} surfaces.

Energetics of CO2 and H2O adsorption on alkaline earth metal doped TiO2.

The process of CO2 and H2O adsorption on the surface of nano-oxide semiconductors is important in the overall performance of artificial photosynthesis and other applications. In this study, we explored the thermodynamics of CO2 and H2O adsorption on TiO2 as a function of surface chemistry. We applied gas adsorption calorimetry to investigate the energetics of adsorption of those molecules on the surface of anatase nanoparticles. In an attempt to increase TiO2 surface affinity to CO2 and H2O, TiO2 was doped with alkaline earth metals (MgO, CaO, SrO, and BaO) by manipulating the chemical synthesis. Adsorption studies using diffuse reflectance infrared spectroscopy at different temperatures indicate that due to the segregation of alkaline earth metals on the surface of TiO2 nanoparticles, both CO2 and subsequent H2O adsorption amounts could be increased. CO2 adsorbs in two different manners, forming carbonates which can be removed at temperatures lower than 700 °C, and a more stable linear adsorption that remains even at 700 °C. Additionally to the surface energetic effects, doping also increased specific surface area, resulting in further improvement in net gas adsorption.

In Situ Transmission Electron Microscopy for Ultrahigh Temperature Mechanical Testing of ZrO2.

This work demonstrates a novel approach to ultrahigh-temperature mechanical testing using a combination of in situ nanomechanical testing and localized laser heating. The methodology is applied to characterizing and testing initially nanograined 10 mol % Sc2O3-stabilized ZrO2 up to its melting temperature. The results suggest that the low-temperature strength of nanograined, d < 50 nm, oxides is not influenced by creep. Tensile fracture of ZrO2 bicrystals produce a weak-temperature dependence suggesting that grain boundary energy dominates brittle fracture of grain boundaries even at high homologous temperatures; for example, T = 2050 °C or T ≈ 77% Tmelt. The maximum temperature for mechanical testing in this work is primarily limited by the instability of the sample, due to evaporation or melting, enabling a host of new opportunities for testing materials in the ultrahigh-temperature regime.

Atomistic modeling of La3+ doping segregation effect on nanocrystalline yttria-stabilized zirconia.

The effect of La3+ doping on the structure and ionic conductivity change in nanocrystalline yttria-stabilized zirconia (YSZ) was studied using a combination of Monte Carlo and molecular dynamics simulations. The simulation revealed the segregation of La3+ at eight tilt grain boundary (GB) structures and predicted an average grain boundary (GB) energy decrease of 0.25 J m-2, which is close to the experimental values reported in the literature. Cation stabilization was found to be the main reason for the GB energy decrease, and energy fluctuations near the grain boundary are smoothed out with La3+ segregation. Both dynamic and energetic analysis on the Σ13(510)/[001] GB structure revealed La3+ doping hinders O2- diffusion in the GB region, where the diffusion coefficient monotonically decreases with increasing La3+ doping concentration. The effect was attributed to the increase in the site-dependent migration barriers for O2- hopping caused by segregated La3+, which also leads to anisotropic diffusion at the GB.

Response to Extreme Temperatures of Mesoporous Silica MCM-41: Porous Structure Transformation Simulation and Modification of Gas Adsorption Properties.

Molecular dynamics (MD) and Monte Carlo (MC) simulations were applied together for the first time to reveal the porous structure transformation mechanisms of mesoporous silica MCM-41 subjected to temperatures up to 2885 K. Silica was experimentally characterized to inform the models and enable prediction of changes in gas adsorption/separation properties. MD simulations suggest that the pore closure process is activated by a collective diffusion of matrix atoms into the porous region, accompanied by bond reformation at the surface. Degradation is kinetically limited, such that complete pore closure is postponed at high heating rates. We experimentally observe decreased gas adsorption with increasing temperature in mesoporous silica heated at fixed rates, due to pore closure and structural degradation consistent with simulation predictions. Applying the Kissinger equation, we find a strong correlation between the simulated pore collapse temperatures and the experimental values which implies an activation energy of 416 ± 17 kJ/mol for pore closure. MC simulations give the adsorption and selectivity for thermally treated MCM-41, for N2, Ar, Kr, and Xe at room temperature within the 1-10 000 kPa pressure range. Relative to pristine MCM-41, we observe that increased surface roughness due to decreasing pore size amplifies the difference of the absolute adsorption amount differently for different adsorbate molecules. In particular, we find that adsorption of strongly interacting molecules can be enhanced in the low-pressure region while adsorption of weakly interacting molecules is inhibited. This then results in higher selectivity in binary mixture adsorption in mesoporous silica.

Irradiation-induced grain growth and defect evolution in nanocrystalline zirconia with doped grain boundaries.

Grain boundaries are effective sinks for radiation-induced defects, ultimately impacting the radiation tolerance of nanocrystalline materials (dense materials with nanosized grains) against net defect accumulation. However, irradiation-induced grain growth leads to grain boundary area decrease, shortening potential benefits of nanostructures. A possible approach to mitigate this is the introduction of dopants to target a decrease in grain boundary mobility or a reduction in grain boundary energy to eliminate driving forces for grain growth (using similar strategies as to control thermal growth). Here we tested this concept in nanocrystalline zirconia doped with lanthanum. Although the dopant is observed to segregate to the grain boundaries, causing grain boundary energy decrease and promoting dragging forces for thermally activated boundary movement, irradiation induced grain growth could not be avoided under heavy ion irradiation, suggesting a different growth mechanism as compared to thermal growth. Furthermore, it is apparent that reducing the grain boundary energy reduced the effectiveness of the grain boundary as sinks, and the number of defects in the doped material is higher than in undoped (La-free) YSZ.

Structure and segregation of dopant-defect complexes at grain boundaries in nanocrystalline doped ceria.

Grain boundaries (GBs) dictate vital properties of nanocrystalline doped ceria. Thus, to understand and predict its properties, knowledge of the interaction between dopant-defect complexes and GBs is crucial. Here, we report atomistic simulations, corroborated with first principles calculations, elucidating the fundamental dopant-defect interactions at model GBs in gadolinium-doped and manganese-doped ceria. Gadolinium and manganese are aliovalent dopants, accommodated in ceria via a dopant-defect complex. While the behavior of isolated dopants and vacancies is expected to depend on the local atomic structure at GBs, the added structural complexity associated with dopant-defect complexes is found to have key implications on GB segregation. Compared to the grain interior, energies of different dopant-defect arrangements vary significantly at the GBs. As opposed to bulk, the stability of oxygen vacancy is found to be sensitive to the dopant arrangement at GBs. Manganese exhibits a stronger propensity for segregation to GBs than gadolinium, revealing that accommodation of dopant-defect clusters depends on the nature of dopants. Segregation strength is found to depend on the GB character, a result qualitatively supported by our experimental observations based on scanning transmission electron microscopy. The present results indicate that segregation energies, availability of favorable sites, and overall stronger binding of dopant-defect complexes would influence ionic conductivity across GBs in nanocrystalline doped ceria. Our comprehensive investigation emphasizes the critical role of dopant-defect interactions at GBs in governing functional properties in fluorite-structured ionic conductors.

Radiation tolerance of nanocrystalline ceramics: insights from Yttria Stabilized Zirconia.

Materials for applications in hostile environments, such as nuclear reactors or radioactive waste immobilization, require extremely high resistance to radiation damage, such as resistance to amorphization or volume swelling. Nanocrystalline materials have been reported to present exceptionally high radiation-tolerance to amorphization. In principle, grain boundaries that are prevalent in nanomaterials could act as sinks for point-defects, enhancing defect recombination. In this paper we present evidence for this mechanism in nanograined Yttria Stabilized Zirconia (YSZ), associated with the observation that the concentration of defects after irradiation using heavy ions (Kr(+), 400 keV) is inversely proportional to the grain size. HAADF images suggest the short migration distances in nanograined YSZ allow radiation induced interstitials to reach the grain boundaries on the irradiation time scale, leaving behind only vacancy clusters distributed within the grain. Because of the relatively low temperature of the irradiations and the fact that interstitials diffuse thermally more slowly than vacancies, this result indicates that the interstitials must reach the boundaries directly in the collision cascade, consistent with previous simulation results. Concomitant radiation-induced grain growth was observed which, as a consequence of the non-uniform implantation, caused cracking of the nano-samples induced by local stresses at the irradiated/non-irradiated interfaces.

Microstructural effects of Sn addition to Fe2O3 thin films.

The influence of Sn in Fe2O3 thin films is addressed. The presence of the tin ions decreases the Fe2O3 particle sizes and surface roughness decreasing of the films' surface is observed as a consequence. X-ray diffraction and atomic force microscopy measurements together with literature results support this phenomenon to be related to the segregation of the additive onto the surface and consequently surface energy decrease, which constitutes the driving force for the microstructure modification, similarly to results previously obtained for powders with same compositions. The effect of the anions introduced in the system as counter-ions of the precursors is also discussed.

A new method for obtaining adsorption isotherms on colloidal suspensions via electrokinetic sonic amplitude measurement.

The standard methods for obtaining adsorption isotherms on colloidal suspensions are usually very time consuming and involve a large number of steps and assumptions that increase the experimental errors. In this work, an alternative method is proposed to evaluate the adsorption behavior of electrosteric-stabilized systems based on electrokinetic sonic amplitude signal measurements. The new method, entitled "zeta-sorption", is noticeably less time-consuming when compared to conventional procedures but showed great precision and reliability confirmed by comparison with data obtained from conventional routes on alumina-polyacrylate and alumina-citric acid aqueous suspensions. The experimental conditions that restrict the applicability of the new method were identified and justified by discussing the possible ion exchanges.