Local spin dynamics of iron oxide magnetic nanoparticles dispersed in different solvents with variable size and shape: A 1H NMR study.

Colloidal magnetic nanoparticles (MNPs) based on a nearly monodisperse iron oxide core and capped by oleic acid have been used as model systems for investigating the superparamagnetic spin dynamics by means of magnetometry measurements and nuclear magnetic resonance (1H NMR) relaxometry. The key magnetic properties (saturation magnetization, coercive field, and frequency dependent "blocking" temperature) of MNPs with different core size (3.5 nm, 8.5 nm, and 17.5 nm), shape (spherical and cubic), and dispersant (hexane and water-based formulation) have been determined. 1H NMR dispersion profiles obtained by measuring the r1 (longitudinal) and r2 (transverse) nuclear relaxivities in the frequency range 0.01-60 MHz confirmed that in all samples the physical mechanisms that drive the nuclear relaxation are the Néel reversal at low temperature and the Curie relaxation at high frequency. The magnetization reversal time at room temperature extracted from the fitting of NMR data falls in the typical range of superparamagnetic systems (10-9-10-10 s). Furthermore, from the distance of minimum approach we could conclude that water molecules do not arrive in close vicinity of the magnetic core. Our findings contribute to elucidate the local spin dynamics mechanisms in colloidal superparamagnetic nanoparticles which are useful in biomedical application as, e.g., contrast agents for magnetic resonance imaging.

Characterization of magnetic nanoparticles from Magnetospirillum Gryphiswaldense as potential theranostics tools.

We investigated the theranostic properties of magnetosomes (MNs) extracted from magnetotactic bacteria, promising for nanomedicine applications. Besides a physico-chemical characterization, their potentiality as mediators for magnetic fluid hyperthermia and contrast agents for magnetic resonance imaging, both in vitro and in vivo, are here singled out. The MNs, constituted by magnetite nanocrystals arranged in chains, show a superparamagnetic behaviour and a clear evidence of Verwey transition, as signature of magnetite presence. The phospholipid membrane provides a good protection against oxidation and the MNs oxidation state is stable over months. Using an alternate magnetic field, the specific absorption rate was measured, resulting among the highest reported in literature. The MRI contrast efficiency was evaluated by means of the acquisition of complete NMRD profiles. The transverse relaxivity resulted as high as the one of a former commercial contrast agent. The MNs were inoculated into an animal model of tumour and their presence was detected by magnetic resonance images two weeks after the injection in the tumour mass.

ZnFe2O4 nanoparticles dispersed in a highly porous silica aerogel matrix: a magnetic study.

We report the detailed structural characterization and magnetic investigation of nanocrystalline zinc ferrite nanoparticles supported on a silica aerogel porous matrix which differ in size (in the range 4-11 nm) and the inversion degree (from 0.4 to 0.2) as compared to bulk zinc ferrite which has a normal spinel structure. The samples were investigated by zero-field-cooling-field-cooling, thermo-remnant DC magnetization measurements, AC magnetization investigation and Mössbauer spectroscopy. The nanocomposites are superparamagnetic at room temperature; the temperature of the superparamagnetic transition in the samples decreases with the particle size and therefore it is mainly determined by the inversion degree rather than by the particle size, which would give an opposite effect on the blocking temperature. The contribution of particle interaction to the magnetic behavior of the nanocomposites decreases significantly in the sample with the largest particle size. The values of the anisotropy constant give evidence that the anisotropy constant decreases upon increasing the particle size of the samples. All these results clearly indicate that, even when dispersed with low concentration in a non-magnetic and highly porous and insulating matrix, the zinc ferrite nanoparticles show a magnetic behavior similar to that displayed when they are unsupported or dispersed in a similar but denser matrix, and with higher loading. The effective anisotropy measured for our samples appears to be systematically higher than that measured for supported zinc ferrite nanoparticles of similar size, indicating that this effect probably occurs as a consequence of the high inversion degree.

NMR-D study of the local spin dynamics and magnetic anisotropy in different nearly monodispersed ferrite nanoparticles.

We present a systematic experimental comparison of the superparamagnetic relaxation time constants obtained by means of dynamic magnetic measurements and (1)H-NMR relaxometry, on ferrite-based nanosystems with different composition, various core sizes and dispersed in different solvents. The application of a heuristic model for the relaxivity allowed a comparison between the reversal time of magnetization as seen by NMR and the results from the AC susceptibility experiments, and an estimation of fundamental microscopic properties. A good agreement between the NMR and AC results was found when fitting the AC data to a Vogel-Fulcher law. Key parameters obtained from the model have been exploited to evaluate the impact of the contribution from magnetic anisotropy to the relaxivity curves and estimate the minimum approach distance of the bulk solvent.

One-step preparation of FeCo nanoparticles in a SBA-16 matrix as catalysts for carbon nanotubes growth.

Nanocomposites containing FeCo alloy nanoparticles dispersed in a highly ordered 3D cubic Im3m mesoporous silica (SBA-16) matrix were prepared by a novel, single-step templated-assisted sol-gel technique. Two different approaches were used in the synthesis of nanocomposites; a pure SBA-16 sample was also prepared for comparison. Low-angle X-ray diffraction, transmission electron microscopy and N2 physisorption at 77 K show that after metal loading, calcination at 500 degrees C and reduction in H2 flux at 800 degrees C the nanocomposites retain the cubic mesoporous structure with pore size not very different from the pure matrix. X-ray absorption fine structure (EXAFS) analysis at Fe and Co K-edges demonstrates that the FeCo nanoparticles have the typical bcc structure. The final nanocomposites were tested as catalysts for the production of carbon nanotubes by catalytic chemical vapour deposition and high-resolution TEM shows that good quality multi-walled carbon nanotubes are obtained.

Multifunctional nanoparticles for dual imaging.

For imaging with different modalities, labels, which provide contrast for all modalities, are required. Colloidal nanoparticles composed out of an inorganic core and a polymer shell offer progress in this direction. Both, the core and the polymer shell, can be synthesized to be fluorescent, magnetic, or radioactive. When different cores are combined with different polymer shells, different types of particles for dual imaging can be obtained, as for example, fluorescent cores with radioactive polymer shells. Properties and perspectives of such nanoparticles for multimodal imaging are discussed.

Characterization of stoichiometric nanocrystalline spinel ferrites dispersed on porous silica aerogel.

Stoichiometric magnetic nanosized ferrites MFe2O4 (M = Mn, Co, Ni) were prepared in form of nearly spherical nanocrystals supported on a highly porous silica aerogel matrix, by a sol-gel procedure. X-ray diffraction and transmission electron microscopy indicate that these materials are made out of non-agglomerated ferrite nanocrystals having size in the 5-10 nm range. Investigation by Mössbauer Spectroscopy was used to gain insights on the superparamagnetic relaxation and on the inversion degree. Magnetic ordering at room temperature varies from superparamagnetic in the NiFe2O4 sample, highly blocked (approximately 70%) in the MnFe2O4 sample and nearly fully blocked in the CoFe2O4 sample. A fitting procedure of the Mössbauer data has been used in order to resolve the spectrum into the tetrahedral and octahedral components; in this way, an inversion degree of 0.68 (very close to bulk values) was obtained for 6 nm silica-supported CoFe2O4 nanocrystals.

Synthesis and microstructure of manganese ferrite colloidal nanocrystals.

The atomic level structure of a series of monodisperse single crystalline nanoparticles with a magnetic core of manganese ferrite was studied using X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) techniques at both the Fe and Mn K-edges, and conventional and high resolution transmission electron microscopy (TEM and HRTEM). In particular, insights on the non-stoichiometry and on the inversion degree of manganese ferrite nanocrystals of different size were obtained by the use of complementary structural and spectroscopic characterization techniques. The inversion degree of the ferrite nanocrystals, i.e. the cation distribution between the octahedral and tetrahedral sites in the spinel structure, was found to be much higher (around 0.6) than the literature values reported for bulk stoichiometric manganese ferrite (around 0.2). The high inversion degree of the nanoparticles is ascribed to the partial oxidation of Mn(2+) to Mn(3+) which was evidenced by XANES, leading to non-stoichiometric manganese ferrite.

The atomic structure of niobium and tantalum containing borophosphate glasses.

A complete structural study has been carried out on sodium borophosphate glass containing increasing amounts of either niobium or tantalum. A combination of high energy x-ray diffraction, neutron diffraction, extended x-ray absorption fine structure, nuclear magnetic resonance, and infrared and Raman spectroscopy has been used to discern the local atomic structure of each component and the changes with M content, where M is either niobium or tantalum. The glasses are found to consist of tetrahedral borate and phosphate with octahedral MO(6). As expected, B and P play the roles of tetrahedral network formers. At low M content there are isolated MO(6) units with [Formula: see text] and [Formula: see text] linkages that contribute to the glass network. As the M content increases, the number of [Formula: see text] links increases, and at the highest M content each MO(6) unit is connected to several others. The octahedra become significantly distorted as the niobium content increases, an effect that is not seen for tantalum.

Structural characterization study of FeCo alloy nanoparticles in a highly porous aerogel silica matrix.

A series of FeCo-SiO(2) nanocomposite aerogels having different FeCo loadings of 3, 5, and 8 wt % were prepared using a novel urea-assisted sol-gel route. The size of the nanoparticles, which was estimated using Scherrer analysis of the main peak of the x-ray diffraction pattern, varies from 3 to 8 nm. X-ray absorption fine structure (EXAFS) and x-ray absorption near edge structure (XANES) techniques at both Fe and Co K edges were used to investigate the structure of the FeCo nanoparticles. EXAFS and XANES show that FeCo nanoparticles have the typical bcc structure. Evidence of oxidation was observed in low FeCo content aerogels. Spatially resolved electron energy loss spectroscopy analysis suggests the formation of a passivation layer of predominantly iron oxide.

Near equiatomic FeCo nanocrystalline alloy embedded in an alumina aerogel matrix: microstructural features and related magnetic properties.

FeCo-Al2O3 nanocomposite aerogels were studied by high-resolution electron microscopy, energy filtered transmission electron microscopy, Mössbauer spectroscopy, and measurements of static magnetizations and hysteretic behavior. The combined use of such techniques provided insights on the formation of bcc FeCo nanocrystalline particles inside the alumina matrix, which is promoted by thermal treatment under hydrogen flow of the parent aerogel. Sample characteristics such as alloy composition and crystallinity, influence of the matrix on the structural evolution, and resulting magnetic properties were investigated as a function of the temperature and time of the reduction treatment.