Fabrication, characterization and numerical validation of a novel thin-wall hydrogel vessel model for cardiovascular research based on a patient-specific stenotic carotid artery bifurcation.

In vitro vascular models, primarily made of silicone, have been utilized for decades for studying hemodynamics and supporting the development of implants for catheter-based treatments of diseases such as stenoses and aneurysms. Hydrogels have emerged as prominent materials in tissue-engineering applications, offering distinct advantages over silicone models for fabricating vascular models owing to their viscoelasticity, low friction, and tunable mechanical properties. Our study evaluated the feasibility of fabricating thin-wall, anatomical vessel models made of polyvinyl alcohol hydrogel (PVA-H) based on a patient-specific carotid artery bifurcation using a combination of 3D printing and molding technologies. The model's geometry, elastic modulus, volumetric compliance, and diameter distensibility were characterized experimentally and numerically simulated. Moreover, a comparison with silicone models with the same anatomy was performed. A PVA-H vessel model was integrated into a mock circulatory loop for a preliminary ultrasound-based assessment of fluid dynamics. The vascular model's geometry was successfully replicated, and the elastic moduli amounted to 0.31 ± 0.007 MPa and 0.29 ± 0.007 MPa for PVA-H and silicone, respectively. Both materials exhibited nearly identical volumetric compliance (0.346 and 0.342% mmHg-1), which was higher compared to numerical simulation (0.248 and 0.290% mmHg-1). The diameter distensibility ranged from 0.09 to 0.20% mmHg-1 in the experiments and between 0.10 and 0.18% mmHg-1 in the numerical model at different positions along the vessel model, highlighting the influence of vessel geometry on local deformation. In conclusion, our study presents a method and provides insights into the manufacturing and mechanical characterization of hydrogel-based thin-wall vessel models, potentially allowing for a combination of fluid dynamics and tissue engineering studies in future cardio- and neurovascular research.

An imprint-based approach to replicate nano- to microscale roughness on gelatin hydrogel scaffolds: surface characterization and effect on endothelialization.

Biologization of biomaterials with endothelial cells (ECs) is an important step in vascular tissue engineering, aiming at improving hemocompatibility and diminishing the thrombo-inflammatory response of implants. Since subcellular topography in the scale of nano to micrometers can influence cellular adhesion, proliferation, and differentiation, we here investigate the effect of surface roughness on the endothelialization of gelatin hydrogel scaffolds. Considering the micron and sub-micron features of the different native tissues underlying the endothelium in the body, we carried out a biomimetic approach to replicate the surface roughness of tissues and analyzed how this impacted the adhesion and proliferation of human umbilical endothelial cells (HUVECs). Using an imprinting technique, nano and micro-roughness ranging from Sa= 402 nm to Sa= 8 µm were replicated on the surface of gelatin hydrogels. Fluorescent imaging of HUVECs on consecutive days after seeding revealed that microscale topographies negatively affect cell spreading and proliferation. By contrast, nanoscale roughnesses of Sa= 402 and Sa= 538 nm promoted endothelialization as evidenced by the formation of confluent cell monolayers with prominent VE-cadherin surface expression. Collectively, we present an affordable and flexible imprinting method to replicate surface characteristics of tissues on hydrogels and demonstrate how nanoscale roughness positively supports their endothelialization.

Investigation of tracer gas transport in a new numerical model of lung acini.

Obstructive pulmonary diseases are associated with considerable morbidity. For an early diagnosis of these diseases, inert gas washouts can potentially be used. However, the complex interaction between lung anatomy and gas transport mechanisms complicates data analysis. In order to investigate this interaction, a numerical model, based on the finite difference method, consisting of two lung units connected in parallel, was developed to simulate the tracer gas transport within the human acinus. Firstly, the geometries of the units were varied and the diffusion coefficients (D) were kept constant. Secondly, D was changed and the geometry was kept constant. Furthermore, simple monoexponential growth functions were applied to evaluate the simulated data. In 109 of the 112 analyzed curves, monoexponential function matched simulated data with an accuracy of over 90%, potentially representing a suitable numerical tool to predict transport processes in further model extensions. For total flows greater than 5 × 10-4 ml/s, the exponential growth constants increased linearly with linear increasing flow to an accuracy of over 95%. The slopes of these linear trend lines of 1.23 µl-1 (D = 0.6 cm2/s), 1.69 µl-1 (D = 0.3 cm2/s), and 2.25 µl-1 (D = 0.1 cm2/s) indicated that gases with low D are more sensitive to changes in flows than gases with high D.

Vascular Response on a Novel Fibrin-Based Coated Flow Diverter.

PURPOSE: Due to thromboembolic complications and in-stent-stenosis after flow diverter (FD) treatment, the long-term use of dual antiplatelet treatment (DAPT) is mandatory. The tested nano-coating has been shown to reduce material thrombogenicity and promote endothelial cell proliferation in vitro. We compared the biocompatibility of coated (Derivo Heal) and non-coated (Derivo bare) FDs with DAPT in an animal model. METHODS: Derivo® bare (n = 10) and Derivo® Heal (n = 10) FD were implanted in the common carotid arteries (CCAs) of New Zealand white rabbits. One additional FD, alternately a Derivo bare (n = 5) or Derivo Heal (n = 5), was implanted in the abdominal aorta (AA) for assessment of the patency of branch arteries. Histopathological examinations were performed after 28 days. Angiography was performed before and after FD implantation and at follow-up. RESULTS: Statistical analysis of the included specimens showed complete endothelialization of all FDs with no significant differences in neointima thickness between Derivo® bare and Derivo® Heal (CCA: p = 0.91; AA: p = 0.59). A significantly reduced number of macrophages in the vessel wall of the Derivo Heal was observed for the CCA (p = 0.02), and significantly reduced fibrin and platelet deposition on the surface of the Derivo Heal was observed for the AA. All branch arteries of the stented aorta remained patent. CONCLUSION: In this animal model, the novel fibrin-based coated FD showed a similar blood and tissue compatibility as the non-coated FD.

Selective intra-carotid blood cooling in acute ischemic stroke: A safety and feasibility study in an ovine stroke model.

Selective therapeutic hypothermia (TH) showed promising preclinical results as a neuroprotective strategy in acute ischemic stroke. We aimed to assess safety and feasibility of an intracarotid cooling catheter conceived for fast and selective brain cooling during endovascular thrombectomy in an ovine stroke model.Transient middle cerebral artery occlusion (MCAO, 3 h) was performed in 20 sheep. In the hypothermia group (n = 10), selective TH was initiated 20 minutes before recanalization, and was maintained for another 3 h. In the normothermia control group (n = 10), a standard 8 French catheter was used instead. Primary endpoints were intranasal cooling performance (feasibility) plus vessel patency assessed by digital subtraction angiography and carotid artery wall integrity (histopathology, both safety). Secondary endpoints were neurological outcome and infarct volumes.Computed tomography perfusion demonstrated MCA territory hypoperfusion during MCAO in both groups. Intranasal temperature decreased by 1.1 °C/3.1 °C after 10/60 minutes in the TH group and 0.3 °C/0.4 °C in the normothermia group (p < 0.001). Carotid artery and branching vessel patency as well as carotid wall integrity was indifferent between groups. Infarct volumes (p = 0.74) and neurological outcome (p = 0.82) were similar in both groups.Selective TH was feasible and safe. However, a larger number of subjects might be required to demonstrate efficacy.

New Concept of Patient-specific Flow Diversion Treatment of Intracranial Aneurysms : Design Aspects and in vitro Fluid Dynamics.

PURPOSE: Current flow diverter (FD) designs limit the possibilities to achieve ideal functional parameters for intra-aneurysmal flow alteration in the implanted state. In this work, we evaluate the technical feasibility of a new patient-specific FD concept and the impact on intra-aneurysmal flow reduction compared to standard FD. METHODS: Based on a literature review, we defined functional requirements, followed by the design and manufacturing of two different prototypes, which we implanted in a patient-specific phantom model. Functional porosity distributions and contour parameters were evaluated in the implanted state and compared to standard FD. Subsequently, we carried out a series of particle image velocimetry (PIV) measurements, in order to assess the impact on intra-aneurysmal flow. RESULTS: With both patient-specific prototypes, it was possible to achieve stronger intra-aneurysmal flow reductions in terms of maximum and mean velocity and vorticity than a standard FD; however, one design showed a strong sensitivity against malpositioning. Overall, fluid dynamics parameters correlated with geometrical aspects such as the porosity and its grade of homogeneity. Beyond that, we found influences by the FD contour projection within the aneurysm, especially connected to the formation of in-jets. CONCLUSION: Our results show that there is a technically feasible concept, which enables a more specific adjustment of functional FD parameters and more effective intra-aneurysmal flow reduction. This could potentially lead to improvements in the efficacy of aneurysm occlusion in cases with challenging fluid dynamics.

Selective Brain Hypothermia for Ischemic MCA-M1 Stroke: Influence of Cerebral Arterial Circulation in a 3D Brain Temperature Model.

Acute ischemic stroke is a major health problem with a high mortality rate and a high risk for permanent disabilities. Selective brain hypothermia has the neuroprotective potential to possibly lower cerebral harm. A recently developed catheter system enables to combine endovascular blood cooling and thrombectomy using the same endovascular access. By using the penumbral perfusion via leptomeningeal collaterals, the catheter aims at enabling a cold reperfusion, which mitigates the risk of a reperfusion injury. However, cerebral circulation is highly patient-specific and can vary greatly. Since direct measurement of remaining perfusion and temperature decrease induced by the catheter is not possible without additional harm to the patient, computational modeling provides an alternative to gain knowledge about resulting cerebral temperature decrease. In this work, we present a brain temperature model with a realistic division into gray and white matter and consideration of spatially resolved perfusion. Furthermore, it includes detailed anatomy of cerebral circulation with possibility of personalizing on base of real patient anatomy. For evaluation of catheter performance in terms of cold reperfusion and to analyze its general performance, we calculated the decrease in brain temperature in case of a large vessel occlusion in the middle cerebral artery (MCA) for different scenarios of cerebral arterial anatomy. Congenital arterial variations in the circle of Willis had a distinct influence on the cooling effect and the resulting spatial temperature distribution before vessel recanalization. Independent of the branching configurations, the model predicted a cold reperfusion due to a strong temperature decrease after recanalization (1.4-2.2  °C after 25 min of cooling, recanalization after 20 min of cooling). Our model illustrates the effectiveness of endovascular cooling in combination with mechanical thrombectomy and its results serve as an adequate substitute for temperature measurement in a clinical setting in the absence of direct intraparenchymal temperature probes.

In vivo comparison of braided (Accero) and laser-cut intracranial stents (Acclino, Credo): evaluation of vessel responses at subacute and mid-term follow-up in a rabbit model.

This study aimed to investigate in vivo two stent technologies, with particular emphasis on thrombogenicity and inflammatory vessel remodeling processes. The micro-stents tested in this study were developed for intracranial aneurysm treatment. In our study twelve, New Zealand white rabbits were divided into two groups: 18 laser-cut stents (LCS) and 18 braided stents (BS) were impanated without admiration of antiplatelet medication. Three stents were implanted into each animal in the common carotid artery, subclavian artery, and abdominal aorta. Digital subtraction angiography was performed before and after stent implantation and at follow-up for the visualization of occurring In-stent thromboembolism or stenosis. The Stents were explanted for histopathological examination at two different timepoints, after 3 and 28 days. Angiographically neither in-stent thrombosis nor stenosis for both groups was seen. There was a progressive increase in the vessel diameter, which was more pronounced for BS than for LCS. We detected a higher number of thrombi adherent to the foreign material on day 3 for BS. On day 3, the neointima was absent, whereas the complete formation observed was on day 28. There was no significant difference between both groups regarding the thickness of the neointima. The in vivo model of our study enabled the evaluation of blood and vessel reactions for two different stent technologies. Differences in vessel dimension and tissue around the stents were observed on day 28. Histological analysis on day 3 enabled the assessment of thrombotic reactions, representing an important complementary result in long-term studies.

In vitro investigation of an intracranial flow diverter with a fibrin-based, hemostasis mimicking, nanocoating.

Flow diversion aims at treatment of intracranial aneurysms via vessel remodeling mechanisms, avoiding the implantation of foreign materials into the aneurysm sack. However, complex implantation procedure, high metal surface and hemodynamic disturbance still pose a risk for thromboembolic complications in the clinical praxis. A novel fibrin and heparin based nano coating considered as a hemocompatible scaffold for neointimal formation was investigated regarding thrombogenicity and endothelialization. The fibrin-heparin coating was compared to a bare metal as well as fibrin- or heparin-coated flow diverters. The implants were tested separately in regard to inflammation and coagulation markers in two different in vitro hemocompatibility models conducted with human whole blood (n = 5). Endothelialization was investigated through a novel dynamic in vitro cell seeding model containing primary human cells with subsequent viability assay. It was demonstrated that platelet loss and platelet activation triggered by presence of a bare metal stent could be significantly reduced by applying the fibrin-heparin, fibrin and heparin coating. Viability of endothelial cells after proliferation was similar in fibrin-heparin compared to bare metal implants, with a slight, non-significant improvement observed in the fibrin-heparin group. The results suggest that the presented nanocoating has the potential to reduce thromboembolic complications in a clinical setting. Though the new model allowed for endothelial cell proliferation under flow conditions, a higher number of samples is required to assess a possible effect of the coating.

Publisher Correction: In vitro investigation of chemical properties and biocompatibility of neurovascular braided implants.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Accuracy of optical coherence tomography imaging in assessing aneurysmal remnants after flow diversion.

BACKGROUND: Optical coherence tomography (OCT) is an ultra-high resolution real-time intravascular imaging method that is gaining interest in cerebrovascular applications. OBJECTIVE: To compare, in a rabbit elastase aneurysm model, digital subtraction angiography (DSA) and OCT as diagnostic tools for the assessment of aneurysmal remnants and baseline characteristics of aneurysms after flow diverter (FD) implantation. METHODS: With Institutional Animal Care and Use Committee approval, saccular aneurysms were created in 28 rabbits and treated with Derivo FDs. DSA was performed before, and immediately after, stent implantation. As a follow-up, DSA and OCT were performed 28 days after device implantation. RESULTS: DSA and OCT were successfully performed in 23 cases. OCT could not be achieved in 5 cases owing to navigational difficulties in the stent lumen with the OCT catheter. Residual aneurysms were significantly more often visible with OCT (18/23 (78%) than with DSA 12/23 (52%), p = 0.031). CONCLUSION: OCT was more sensitive than conventional angiography for the assessment of residual aneurysms at 28 days after FD implantation in an animal model.

Hemocompatibility Testing of Blood-Contacting Implants in a Flow Loop Model Mimicking Human Blood Flow.

The growing use of medical devices (e.g., vascular grafts, stents, and cardiac catheters) for temporary or permanent purposes that remain in the body's circulatory system demands a reliable and multiparametric approach that evaluates the possible hematologic complications caused by these devices (i.e., activation and destruction of blood components). Comprehensive in vitro hemocompatibility testing of blood-contacting implants is the first step towards successful in vivo implementation. Therefore, extensive analysis according to the International Organization for Standardization 10993-4 (ISO 10993-4) is mandatory prior to clinical application. The presented flow loop describes a sensitive model to analyze the hemostatic performance of stents (in this case, neurovascular) and reveal adverse effects. The use of fresh human whole blood and gentle blood sampling are essential to avoid the preactivation of blood. The blood is perfused through a heparinized tubing containing the test specimen by using a peristaltic pump at a rate of 150 mL/min at 37 °C for 60 min. Before and after perfusion, hematologic markers (i.e., blood cell count, hemoglobin, hematocrit, and plasmatic markers) indicating the activation of leukocytes (polymorphonuclear [PMN]-elastase), platelets (ß-thromboglobulin [ß-TG]), the coagulation system (thombin-antithrombin III [TAT]), and the complement cascade (SC5b-9) are analyzed. In conclusion, we present an essential and reliable model for extensive hemocompatibility testing of stents and other blood-contacting devices prior to clinical application.

Corrigendum: Development of a Routinely Applicable Imaging Protocol for Fast and Precise Middle Cerebral Artery Occlusion Assessment and Perfusion Deficit Measure in an Ovine Stroke Model: A Case Study.

[This corrects the article DOI: 10.3389/fneur.2019.01113.].

Development of a Routinely Applicable Imaging Protocol for Fast and Precise Middle Cerebral Artery Occlusion Assessment and Perfusion Deficit Measure in an Ovine Stroke Model: A Case Study.

Temporary middle cerebral artery occlusion (MCAO) in sheep allows modeling of acute large vessel occlusion stroke and subsequent vessel recanalization. However, rapid and precise imaging-based assessment of vessel occlusion and the resulting perfusion deficit during MCAO still represents an experimental challenge. Here, we tested feasibility and suitability of a strategy for MCAO verification and perfusion deficit assessment. We also compared the extent of the initial perfusion deficit and subsequent lesion size for different MCAO durations. The rete mirabile prevents reliable vascular imaging investigation of middle cerebral artery filling status. Hence, computed tomography perfusion imaging was chosen for indirect confirmation of MCAO. Follow-up infarct size evaluation by diffusion-weighted magnetic resonance imaging revealed fluctuating results, with no apparent relationship of lesion size with MCAO at occlusion times below 4 h, potentially related to the variable collateralization of the MCA territory. This underlines the need for intra-ischemic perfusion assessment and future studies focusing on the correlation between perfusion deficit, MCAO duration, and final infarct volume. Temporary MCAO and intra-ischemic perfusion imaging nevertheless has the potential to be applied for the simulation of novel recanalization therapies, particularly those that aim for a fast reperfusion effect in combination with mechanical thrombectomy in a clinically realistic scenario.

Preclinical Evaluation of the Accero Stent: Flow Remodelling Effect on Aneurysm, Vessel Reaction and Side Branch Patency.

PURPOSE: It has been hypothesized that microstents which are used to prevent coil protrusion in the treatment of cerebral aneurysms may have flow diverting and therefore occlusive effects. In a rabbit elastase aneurysm model, we investigated the aneurysm occlusion rate and vessel reaction of a braided Accero stent prototype with porosity in the lower range of other available (non-flow-diverter) microstents. METHODS: Ten aneurysms were induced the right subclavian artery in New Zealand white rabbits and treated with the Accero stent prototype. In each subject, a second stent was implanted in the abdominal aorta to cover the origins of branch arteries. Angiographic follow-up and explantation of the devices and aneurysms for histological analysis were performed after 3 months (n = 5) and 6 months (n = 5). RESULTS: Grades I (< 50%) and II (> 50%) occlusion rates were observed in 9 (90%) and 1 (10%) of ten aneurysms treated with the stent device. The mean reduction in contrast filling at 6 months was 42.1% (p = .02). Neointima thickness was significantly higher in the subclavian artery than in the abdominal aorta after 3 (p = .03), whereas not after 6 months (p = .1). No cases of inadequate wall apposition, branch artery occlusion or stent thrombosis were observed. CONCLUSION: The present study showed flow remodelling properties of the device prototype with progredient aneurysm occlusion. A larger in vivo study with induced aneurysm should be done to confirm these results.

Combined local hypothermia and recanalization therapy for acute ischemic stroke: Estimation of brain and systemic temperature using an energetic numerical model.

Local brain hypothermia is an attractive method for providing cerebral neuroprotection for ischemic stroke patients and at the same time reducing systemic side effects of cooling. In acute ischemic stroke patients with large vessel occlusion, combination with endovascular mechanical recanalization treatment could potentially allow for an alleviation of inflammatory and apoptotic pathways in the critical phase of reperfusion. The direct cooling of arterial blood by means of an intra-carotid heat exchange catheter compatible with recanalization systems is a novel promising approach. Focusing on the concept of "cold reperfusion", we developed an energetic model to calculate the rate of temperature decrease during intra-carotid cooling in case of physiological as well as decreased perfusion. Additionally, we discussed and considered the effect and biological significance of temperature decrease on resulting brain perfusion. Our model predicted a 2 °C brain temperature decrease in 8.3, 11.8 and 26.2 min at perfusion rates of 50, 30 and 10ml100g⋅min, respectively. The systemic temperature decrease - caused by the venous blood return to the main circulation - was limited to 0.5 °C in 60 min. Our results underline the potential of catheter-assisted, intracarotid blood cooling to provide a fast and selective brain temperature decrease in the phase of vessel recanalization. This method can potentially allow for a tissue hypothermia during the restoration of the physiological flow and thus a "cold reperfusion" in the setting of mechanical recanalization.

In vitro investigation of chemical properties and biocompatibility of neurovascular braided implants.

Braiding of Nitinol micro wires is an established technology for the manufacturing of fine-meshed neurovascular implants for tortuous vessel geometries. Electropolishing of wires before the braiding process has the potential to improve the in vitro behaviour in terms of thrombogenicity and endothelial cell proliferation. In this study, we present the first in vitro investigation of braided electropolished/blue oxide Nitinol samples in a blood flow loop, showing a significantly lower activation of the coagulation pathway (represented by the TAT III marker) and a tendency towards reduced platelet adhesion. Furthermore, we applied the same surface treatment on flat disks and measured protein adhesion as well as endothelial cell proliferation. We compared our results to non-electropolished samples with a native oxide surface. While platelet deposition was reduced on electropolished/blue oxide surface, a significant increase of endothelial cell seeding was observed. Investigation of inflammatory marker expression in endothelial cells provided divergent results depending on the marker tested, demanding closer investigation. Surface analysis using Auger electron spectroscopy revealed a thin layer mainly consisting of titanium oxynitride or titanium oxide + titanium nitride as a potential cause of the improved biological performance. Translated to the clinical field of intracranial aneurysm treatment, the improved biocompatibility has the potential to increase both safety (low thrombogenicity) and effectiveness (aneurysm neck reconstruction).

Estimating Local Therapeutic Hypothermia in Case of Ischemic Stroke Using a 1D Hemodynamics Model and an Energetic Temperature Model.

In Western countries, stroke is the third-most widespread cause of death. 80% of all strokes are ischemic and show a mortality rate of about 25%. Furthermore, 35-55% of affected patients retain a permanent disability. Therapeutic hypothermia (TH) could decrease inflammatory processes and the stroke-induced cerebral damage. Currently, the standard technique to induce TH is cooling of the whole body, which can cause several side effects. A novel cooling sheath uses intra-carotid blood cooling to induce local TH. Unfortunately, the control of the temporal and spatial cerebral temperature course requires invasive temperature measurements. Computational modeling could be used to predict the resulting temperature courses instead. In this work, a detailed 1D hemodynamics model of the cerebral arterial system was coupled with an energetic temperature model. For physiological conditions, 50% and 100% M1-stenoses, the temperatures in the supply area of the middle cerebral artery (MCA) and of the systemic body was analyzed. A 2K temperature decrease was reached within 10min of cooling for physiological conditions and 50% stenosis. For 100% stenosis, a significant lower cooling effect was observed, resulting in a maximum cerebral temperature decrease of 0.7K after 30min of cooling. A significant influence of collateral flow rates on the cooling effect was observed. However, regardless of the stenosis degree, the temperature decrease was strongest within the first 20min of cooling, which demonstrates the fast and effective impact of intra-carotid blood cooling.

Review of selective brain hypothermia in acute ischemic stroke therapy using an intracarotid, closed-loop cooling catheter.

In acute ischemic stroke patients, selective brain hypothermia is a promising concept aiming at a fast decrease of brain temperature and thus neuroprotection in the acute phase of ischemia. At the same time, the emergence of mechanical thrombectomy (MT) as an effective treatment in large-vessel occlusion opens the door for a combination of neuroprotective approaches in the frame of a neurovascular, catheter-based intervention. In this regard, intracarotid cooling is a very effective energetic approach, using the blood supply to the penumbra as a fast transport vector for heat exchange in affected brain regions. We review the state of development of a novel closed-loop cooling catheter, describing design-related as well as procedural aspects and presenting results from different theoretical and experimental studies. Finally, we compare the concept with two alternative methods: cold saline infusion and extracorporeal blood cooling. We focus on the combination with MT, considering the effect of different and variable perfusion rates on the final goal of a "cold reperfusion" at the time of blood flow restoration.