Perovskite-like Liquid-Crystalline Materials Based on Polyfluorinated Imidazolium Cations.

Hybrid Organic-Inorganic Halide Perovskites (HOIHPs) represent an emerging class of semiconducting materials, widely employed in a variety of optoelectronic applications. Despite their skyrocket growth in the last decade, a detailed understanding on their structure-property relationships is still missing. In this communication, we report two unprecedented perovskite-like materials based on polyfluorinated imidazolium cations. The two materials show thermotropic liquid crystalline behavior resulting in the emergence of stable mesophases. The manifold intermolecular F⋅⋅⋅F interactions are shown to be meaningful for the stabilization of both the solid- and liquid-crystalline orders of these perovskite-like materials. Moreover, the structure of the incorporated imidazolium cation was found to tune the properties of the liquid crystalline phase. Collectively, these results may pave the way for the design of a new class of halide perovskite-based soft materials.

Synthesis and Linker-Controlled Self-Assembly of Dendritic Amphiphiles with Branched Fluorinated Tails.

Amphiphiles containing fluorinated segments tend to aggregate in the aqueous solution into structure of lower curvature than their hydrocarbon analogs due to their larger diameter. A benefit of supramolecular structures incorporating fluorine moieties is their high electron density, which can be viewed in cryo-TEM with better contrast than their hydrogenated forms. A modular approach has been developed for the synthesis of a new family of nonionic branched amphiphiles consisting of oligoglycerol units (G2) as the hydrophilic part and a branched fluorinated (F27) hydrophobic part. The design of this hydrophobic moiety allows to achieve a higher fluorine density than the previously used straight-chain perfluoroalkanes. Two different chemical approaches, amide, and triazole, are used to link the hydrophilic and hydrophobic segments. In addition, the aggregation behavior is investigated by dynamic light scattering (DLS) and cryo-TEM. The measurements prove the formation of multivesicular (MVVs) and multilamellar (MLVs) vesicles as well as smaller unilamellar vesicles. Further, the cell viability test proves the low cell toxicity of these nanoarchitectures for potential biomedical applications.

Italian validation of Arizona Sexual Experience Scale (ASEX) on patients suffering from psychotic spectrum disorders.

INTRODUCTION: Many forms of mental disorders, especially psychotic disorders are characterized also by a worsening of sexual functioning. The main aim of this study was to validate in the Italian context the Arizona Sexual Experience Scale (ASEX), a very useful international tool to assess sexual dysfunction in people suffering from mental illness. METHODS: Seventy-three patients suffering from psychotic spectrum disorders were recruited. We administered the Italian version of ASEX, adequately translated by two expert bilinguals. After 15 days we administered once again the test for test-retest reliability. RESULTS: Validation of ASEX revealed Cronbach's coefficients >0.70 in both single items as in the total score. In addition, the test-retest reliability revealed Pearson's coefficients >0.50 in the various domains. Confirmatory factor analysis revealed good fit indexes for the two factors model of ASEX (SRMR=0.54; CFI=0.974; RMSEA=0.135). DISCUSSION: This study represents the first validation in the Italian psychiatric context of a very useful specific tool for the sexual assessment in people suffering from mental illness. Our analysis after the ASEX administration revealed good psychometric characteristics in terms of confirmatory factor analysis, internal consistency, and test-retest reliability. CONCLUSIONS: On the basis of our results and consideration, we strongly suggest the use of ASEX in clinical context to assess the sexual function of patients with severe mental disorders.

Halogen Bonding in Perovskite Solar Cells: A New Tool for Improving Solar Energy Conversion.

Hybrid organic-inorganic halide perovskites (HOIHPs) have recently emerged as a flourishing area of research. Their easy and low-cost production and their unique optoelectronic properties make them promising materials for many applications. In particular, HOIHPs hold great potential for next-generation solar cells. However, their practical implementation is still hindered by their poor stability in air and moisture, which is responsible for their short lifetime. Optimizing the chemical composition of materials and exploiting non-covalent interactions for interfacial and defects engineering, as well as defect passivation, are efficient routes towards enhancing the overall efficiency and stability of perovskite solar cells (PSCs). Due to the rich halogen chemistry of HOIHPs, exploiting halogen bonding, in particular, may pave the way towards the development of highly stable PSCs. Improved crystallization and stability, reduction of the surface trap states, and the possibility of forming ordered structures have already been preliminarily demonstrated.

Waterproof-breathable films from multi-branched fluorinated cellulose esters.

Cellulose ester films were prepared by esterification of cellulose with a multibranched fluorinated carboxylic acid, "BRFA" (BRanched Fluorinated Acid), at different anhydroglucose unit:BRFA molar ratios (i.e., 1:0, 10:1, 5:1, and 1:1). Morphological and optical analyses showed that cellulose-BRFA materials at molar ratios 10:1 and 5:1 formed flat and transparent films, while the one at 1:1 M ratio formed rough and translucent films. Degrees of substitution (DS) of 0.06, 0.09, and 0.23 were calculated by NMR for the samples at molar ratios 10:1, 5:1, and 1:1, respectively. ATR-FTIR spectroscopy confirmed the esterification. DSC thermograms showed a single glass transition, typical of amorphous polymers, at -11 °C. The presence of BRFA groups shifted the mechanical behavior from rigid to ductile and soft with increasing DS. Wettability was similar to standard fluoropolymers such as PTFE and PVDF. Finally, breathability and water uptake were characterized and found comparable to materials typically used in textiles.

Tuning of Ionic Liquid Crystal Properties by Combining Halogen Bonding and Fluorous Effect.

We report halogen-bonded complexes between 1-polyfluoroalkyl-3-alkylimidazolium iodides and mono-iodoperfluoroalkanes of different chain lengths or di-iodoperfluorooctane. 19 F NMR analyses revealed that the preferred stoichiometry between the donors and acceptors is 1 : 1 in the cases of the mono-iodoperfluoroalkanes, and 2 : 1 with di-iodoperfluorooctane, as a result of the monodentate behavior of the iodide anion (halogen bond acceptor). Single crystal X-ray diffraction analyses showed the presence of a perfluorinated superanion, which interdigitates with the cation fluorinated chains, favoring the formation of lamellar structures. All of the obtained supramolecular complexes exhibit enantiotropic liquid crystalline phases over a broad range of temperatures. Most of the obtained complexes show melting points lower than 100 °C, two of them being liquid at room temperature, thus representing a new family of fluorinated ionic liquid crystals.

Comparing the Halogen Bond to the Hydrogen Bond by Solid-State NMR Spectroscopy: Anion Coordinated Dimers from 2- and 3-Iodoethynylpyridine Salts.

Halogen bonding is an increasingly important tool in crystal engineering, and measuring its influence on the local chemical and electronic environment is necessary to fully understand this interaction. Here, we present a systematic crystallographic and solid-state NMR study of self-complementary halogen-bonded frameworks built from the halide salts (HCl, HBr, HI, HI3 ) of 2-iodoethynylpyridine and 3-iodoethynylpyridine. A series of single crystal X-ray structures reveals the formation of discrete charged dimers in the solid state, directed by simultaneous X- ⋅⋅⋅H-N+ hydrogen bonds and C-I⋅⋅⋅X- halogen bonds (X=Cl, Br, I). Each compound was studied using multinuclear solid-state magnetic resonance spectroscopy, observing 1 H to investigate the hydrogen bonds and 13 C, 35 Cl, and 79/81 Br to investigate the halogen bonds. A natural localized molecular orbital analysis was employed to help interpret the experimental results. 1 H SSNMR spectroscopy reveals a decrease in the chemical shift of the proton participating in the hydrogen bond as the halogen increases in size, whereas the 13 C SSNMR reveals an increased 13 C chemical shift of the C-I carbon for C-I⋅⋅⋅X- relative to C-I⋅⋅⋅N halogen bonds. Additionally, 35 Cl and 79/81 Br SSNMR, along with computational results, have allowed us to compare the C-I⋅⋅⋅X- halogen bond involving each halide in terms of NMR observables. Due to the isostructural nature of these compounds, they are ideal cases for experimentally assessing the impact of different halogen bond acceptors on the solid-state NMR response.

From Molecules to Materials: Engineering New Ionic Liquid Crystals Through Halogen Bonding.

Herein, we demonstrate that a bottom-up approach, based on halogen bonding (XB), can be successfully applied for the design of a new type of ionic liquid crystals (ILCs). Taking advantages of the high specificity of XB for haloperfluorocarbons and the ability of anions to act as XB-acceptors, we obtained supramolecular complexes based on 1-alkyl-3-methylimidazolium iodides and iodoperfluorocarbons, overcoming the well-known immiscibility between hydrocarbons (HCs) and perfluorocarbons (PFCs). The high directionality of the XB combined with the fluorophobic effect, allowed us to obtain enantiotropic liquid crystals where a rigid, non-aromatic, XB supramolecular anion acts as mesogenic core. X-ray structure analysis of the complex between 1-ethyl-3-methylimidazolium iodide and iodoperfluorooctane showed the presence of a layered structure, which is a manifestation of the well-known tendency to segregation of perfluoroalkyl chains. This is consistent with the observation of smectic mesophases. Moreover, all the reported complexes melt below 100 °C, and most are mesomorphic even at room temperature, despite that the starting materials were non-mesomorphic in nature. The supramolecular strategy reported here provides new design principles for mesogen design allowing a totally new class of functional materials.

Halogen bonding in hypervalent iodine and bromine derivatives: halonium salts.

Halogen bonds have been identified in a series of ionic compounds involving bromonium and iodonium cations and several different anions, some also containing hypervalent atoms. The hypervalent bromine and iodine atoms in the examined compounds are found to have positive σ-holes on the extensions of their covalent bonds, while the hypervalent atoms in the anions have negative σ-holes. The positive σ-holes on the halogens of the studied halonium salts determine the linearity of the short contacts between the halogen and neutral or anionic electron donors, as usual in halogen bonds.

Photoresponsive ionic liquid crystals assembled via halogen bond: en route towards light-controllable ion transporters.

We demonstrate that halogen bonding (XB) can offer a novel approach for the construction of photoresponsive ionic liquid crystals. In particular, we assembled two new supramolecular complexes based on 1-ethyl-3-methylimidazolium iodides and azobenzene derivatives containing an iodotetrafluoro-benzene ring as XB donor, where the iodide anion acted as an XB acceptor. DSC and X-ray diffraction analyses revealed that the preferred stoichiometry between the XB donors and acceptors is 2 : 1, and that the iodide anions act as bidentate XB-acceptors, binding two azobenzene derivatives. Due to the high directionality of the XB, calamitic superanions are obtained, while the segregation occurring between the charged and uncharged parts of the molecules gives rise to a layered structure in the crystal lattice. Despite the fact that the starting materials are non-mesomorphic, the halogen-bonded supramolecular complexes exhibited monotropic lamellar liquid-crystalline phases over broad temperature ranges, as confirmed with polarized optical microscopy. Due to the presence of the azobenzene moieties, the LCs were photoresponsive, and a LC-to-isotropic phase transition could be obtained by irradiation with UV light. We envisage that the light-induced phase transition, in combination with the ionic nature of the LC, provides a route towards light-induced control over ion transport and conductance in these supramolecular complexes.

Hierarchical Self-Assembly of Halogen-Bonded Block Copolymer Complexes into Upright Cylindrical Domains.

Self-assembly of block copolymers into well-defined, ordered arrangements of chemically distinct domains is a reliable strategy for preparing tailored nanostructures. Microphase separation results from the system, minimizing repulsive interactions between dissimilar blocks and maximizing attractive interactions between similar blocks. Supramolecular methods have also achieved this separation by introducing small-molecule additives binding specifically to one block by noncovalent interactions. Here, we use halogen bonding as a supramolecular tool that directs the hierarchical self-assembly of low-molecular-weight perfluorinated molecules and diblock copolymers. Microphase separation results in a lamellar-within-cylindrical arrangement and promotes upright cylindrical alignment in films upon rapid casting and without further annealing. Such cylindrical domains with internal lamellar self-assemblies can be cleaved by solvent treatment of bulk films, resulting in separated and segmented cylindrical micelles stabilized by halogen-bond-based supramolecular crosslinks. These features, alongside the reversible nature of halogen bonding, provide a robust modular approach for nanofabrication.

Crystal Structure of the DFNKF Segment of Human Calcitonin Unveils Aromatic Interactions between Phenylalanines.

Although intensively studied, the high-resolution crystal structure of the peptide DFNKF, the core-segment of human calcitonin, has never been described. Here we report how the use of iodination as a strategy to promote crystallisation and facilitate phase determination, allowed us to solve, for the first time, the single-crystal X-ray structure of a DFNKF derivative. Computational studies suggest that both the iodinated and the wild-type peptides populate very similar conformations. Furthermore, the conformer found in the solid-state structure is one of the most populated in solution, making the crystal structure a reliable model for the peptide in solution. The crystal structure of DFNKF(I) confirms the overall features of the amyloid cross-ß spine and highlights how aromatic-aromatic interactions are important structural factors in the self-assembly of this peptide. A detailed analysis of such interactions is reported.

Superfluorinated Ionic Liquid Crystals Based on Supramolecular, Halogen-Bonded Anions.

Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen-bonded supramolecular anions [Cn F2 n+1 -I⋅⋅⋅I⋅⋅⋅I-Cn F2 n+1 ](-) are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen-bonded liquid crystals, and 2) imidazolium-based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.

The Halogen Bond.

The halogen bond occurs when there is evidence of a net attractive interaction between an electrophilic region associated with a halogen atom in a molecular entity and a nucleophilic region in another, or the same, molecular entity. In this fairly extensive review, after a brief history of the interaction, we will provide the reader with a snapshot of where the research on the halogen bond is now, and, perhaps, where it is going. The specific advantages brought up by a design based on the use of the halogen bond will be demonstrated in quite different fields spanning from material sciences to biomolecular recognition and drug design.

Halogen Bonding in Hypervalent Iodine Compounds.

Halogen bonds occur when electrophilic halogens (Lewis acids) attractively interact with donors of electron density (Lewis bases). This term is commonly used for interactions undertaken by monovalent halogen derivatives. The aim of this chapter is to show that the geometric features of the bonding pattern around iodine in its hypervalent derivatives justify the understanding of some of the longer bonds as halogen bonds. We suggest that interactions directionality in ionic and neutral λ(3)-iodane derivatives is evidence that the electron density distribution around iodine atoms is anisotropic, a region of most positive electrostatic potential exists on the extensions of the covalent bonds formed by iodine, and these positive caps affect, or even determine, the crystal packing of these derivatives. For instance, the short cation-anion contacts in ionic λ(3)-iodane and λ(5)-iodane derivatives fully match the halogen bond definition and geometrical prerequisites. The same holds for the short contacts the cation of ionic λ(3)-iodanes forms with lone-pair donors or the short contacts given by neutral λ(3)-iodanes with incoming nucleophiles. The longer and weaker bonds formed by iodine in hypervalent compounds are usually called secondary bondings and we propose that the term halogen bond can also be used. Compared to the term secondary bond, halogen bond may possibly be more descriptive of some bonding features, e.g., its directionality and the relationships between structure of interacting groups and interaction strength.

A synthetically modified hydrophobin showing enhanced fluorous affinity.

Hydrophobins are natural surfactant proteins endowed with exceptional surface activity and film-forming capabilities and their use as effective "fluorine-free fluorosurfactants" has been recently reported. In order to increase their fluorophilicity further, here we report the preparation of a unique fluorous-modified hydrophobin, named F-HFBI. F-HFBI was found to be more effective than its wild-type parent protein HFBI at reducing interface tension of water at both air/water and oil/water interfaces, being particularly effective at the fluorous/water interface. F-HFBI was also found to largely retain the exceptionally good capability of forming strong and elastic films, typical of the hydrophobin family. Further studies by interface shear rheology and isothermal compression, alongside Quartz Crystal Microbalance and Atomic Force Microscopy, demonstrated the tendency of F-HFBI to form thicker films compared to the wild-type protein. These results suggest that F-HFBI may function as an effective compatibilizer for biphasic systems comprising a fluorous phase.

Halogen-bonded photoresponsive materials.

The aim of the present review is to illustrate to the reader the state of the art on the construction of supramolecular azobenzene-containing materials formed by halogen bonding. These materials include several examples of polymeric, liquid crystalline or crystalline species whose performances are either superior to the corresponding performances of their hydrogen-bonded analogues or simply distinctive of the halogen-bonded species.

Halogen bond: a long overlooked interaction.

Because of their high electronegativity, halogen atoms are typically considered, in most of their derivatives, as sites of high electron density and it is commonly accepted that they can form attractive interactions by functioning as the electron donor site (nucleophilic site). This is the case when they work as hydrogen bond acceptor sites. However, the electron density in covalently bound halogens is anisotropically distributed. There is a region of higher electron density, accounting for the ability of halogens to function as electron donor sites in attractive interactions, and a region of lower electron density where the electrostatic potential is frequently positive (mainly in the heavier halogens). This latter region is responsible for the ability of halogen atoms to function as the electron-acceptor site (electrophilic site) in attractive interactions formed with a variety of lone pair-possessing atoms, anions, and π-systems. This ability is quite general and is shown by a wide diversity of halogenated compounds (e.g., organohalogen derivatives and dihalogens). According to the definition proposed by the International Union of Pure and Applied Chemistry, any attractive interactions wherein the halogen atom is the electrophile is named halogen bond (XB). In this chapter, it is discussed how the practice and the concept of XB developed and a brief history of the interaction is presented. Papers (either from the primary or secondary literature) which have reported major experimental findings in the field or which have given important theoretical contributions for the development of the concept are recollected in order to trace how a unifying and comprehensive categorization emerged encompassing all interactions wherein halogen atoms function as the electrophilic site.

A superfluorinated molecular probe for highly sensitive in vivo(19)F-MRI.

(19)F-MRI offers unique opportunities to image diseases and track cells and therapeutic agents in vivo. Herein we report a superfluorinated molecular probe, herein called PERFECTA, possessing excellent cellular compatibility, and whose spectral properties, relaxation times, and sensitivity are promising for in vivo (19)F-MRI applications. The molecule, which bears 36 equivalent (19)F atoms and shows a single intense resonance peak, is easily synthesized via a simple one-step reaction and is formulated in water with high stability using trivial reagents and methods.