Healthcare workers' experiences protecting themselves and their families during the COVID-19 pandemic in 2020-2021.

We characterized experiences and strategies used by frontline healthcare workers to prevent severe-acute-respiratory-syndrome-related coronavirus transmission at work and to household members during the coronavirus disease pandemic. Alongside an online questionnaire (n = 234), remote semi-structured interviews (n = 23: 15 clinicians, 8 non-clinicians) were conducted in 2021. Mitigation challenges and facilitators were identified from data to represent experiences as a process considering the before, during, and after work shifts. Journey mapping was utilized to visually describe how healthcare workers experienced the stages of the work environment, leaving work, commuting home, and the home environment, and strategies implemented to stay safe. Major facilitators included the uptake of coronavirus disease vaccines and testing, information regarding virus transmission, and adequate personal protective equipment. The most critical challenges identified included a lack of designated areas for end-of-day disinfection, changing rooms, showers, and lockers in the leaving work stage. Psychosocial and environmental factors must be considered in future hospital pandemic preparations.

Development and evaluation of two educational sessions on take-home lead exposure prevention for construction workers and their families.

Take-home exposures occur when workers accidentally bring workplace contaminants home. Regular job responsibilities may expose construction workers to lead, which extends to their households via the take-home pathway. The present study aimed to develop and evaluate 2 educational sessions addressing take-home lead exposure tailored to construction workers and their families. Educational materials on take-home lead exposure and prevention strategies were designed following guidance from US government institutions and experts on construction work, lead exposure, and educational interventions. The educational materials were pilot-tested with construction workers and their family members during in-person or online sessions in English or Spanish. Changes in knowledge of take-home lead exposure were assessed through pre- and post-testing and open-ended feedback was collected from both participants and session facilitators. The study sample comprised 44 participants, including 33 workers and 11 family members. Among all participants, 81% were male, 46% were Hispanic or Latino, and the average age was 29 years. Post-test scores (µ = 93%, SD = 10%) were higher than pre-test scores (µ = 82%, SD = 19%), and younger participants (<30 years) were more likely to have a lower pre-test score compared to older participants (≥30 years). Overall, feedback from participants and facilitators was positive, indicating appropriate duration, appealing visuals, and ease of engagement through the training activities. Effective public health education for lead-exposed construction workers and their families is needed to reduce lead exposure disparities, especially among children of workers. Interventions must recognize that take-home exposures are not isolated to occupational or home environments.

Metals dust in workers' homes and potential for take home in the Greater Boston area: Pilot study.

Toxic metals such as lead, cadmium, arsenic, are present at construction worksites. From work, metals can easily, unintentionally be transported to homes of workers, contaminating living spaces and affecting others including children, known as "take-home exposure." Focus has been given to minimizing lead take-home exposure but less is known about other metals. This pilot study aims to better understand the sources and predictors of metals in the home primarily of construction workers (n = 21), but also explore other workers potentially exposed [janitorial (n = 4) and auto repair (n = 2) jobs]. Greater Boston workers were recruited in 2018-2019 through collaboration with community-based organizations and worker unions serving low-income/immigrant workers. During a home visit, a dust vacuum sample was collected, a worker questionnaire was administered, and home observations were performed to determine factors that could affect home metals concentration. Thirty elements were analyzed in the dust via inductively coupled plasma coupled to atomic emission and mass spectrometry. We performed univariable and multivariable models, potential predictive factors, and multivariable mixed-effect regression analyses combining metals. Arsenic, chromium, copper, lead, manganese, nickel, and tin, commonly found in construction, were higher in construction workers' home dust compared to other workers, although not statistically significant. Sociodemographic/work/home-related variables affected home metals dust concentrations. Various work-related factors were associated with higher metal dust levels, for example: no work locker vs. locker (nickel ratio of means or ROM = 4.2, p < 0.05); mixing vs. no mixing work/personal items (nickel ROM = 1.6, p < 0.05); dusty vs. no dusty at work (copper ROM = 3.1, p < 0.05); not washing vs. washing hands after work (manganese ROM = 1.4, p < 0.05); not changing vs. changing clothes after work (cadmium ROM = 6.9, p < 0.05; copper ROM = 3.6, p < 0.05). Mixed effect regression confirmed statistical significance, which suggests a likelihood of metal mixtures carrying a "take-home" potential. Lead home interventions should evaluate other metals exposure reduction.

Validation of in vivo toenail measurements of manganese and mercury using a portable X-ray fluorescence device.

BACKGROUND AND OBJECTIVE: Toenail metal concentrations can be used as an effective biomarker for exposure to environmental toxicants. Typically toenail clippings are measured ex vivo using inductively coupled plasma mass spectrometry (ICP-MS). X-ray fluorescence (XRF) toenail metal measurements done on intact toenails in vivo could be used as an alternative to alleviate some of the disadvantages of ICP-MS. In this study, we assessed the ability to use XRF to measure toenail metal concentrations in real-time without having to clip the toenails (i.e., in vivo) in two occupational settings for exposure assessment of manganese and mercury. MATERIALS AND METHODS: The portable XRF method used a 3-min in vivo measurement of toenails prior to clipping and was assessed against ICP-MS measurement of toenail clippings taken immediately after the XRF measurement and work history for a group of welders (n = 16) assessed for manganese exposure and nail salon workers (n = 10) assessed for mercury exposure. RESULTS AND CONCLUSIONS: We identified that in vivo XRF metal measurements were able to discern exposure to manganese in welders and mercury in nail salon workers. We identified significant positive correlations between ICP-MS of clippings and in vivo XRF measures of both toenail manganese (R = 0.59, p = 0.02) and mercury (R = 0.74, p < 0.001), as well as between in vivo XRF toenail manganese and work history among the welders (R = 0.55, p = 0.03). We identified in vivo XRF detection limits to be 0.5 µg/g for mercury and 2.6 µg/g for manganese. Further work should elucidate differences in the timing of exposure using the in vivo XRF method over toenail clippings and modification of measurement time and x-ray setting to further decrease the detection limit. In vivo portable, XRF measurements can be used to effectively measure toenail Mn and Hg in occupational participants in real-time during study visits and at a fraction of the cost.

Expanding Reach of Occupational Health Knowledge: Contributing Subject-Matter Expertise to Wikipedia as a Class Assignment.

The National Institute for Occupational Safety and Health (NIOSH) and several university programs have collaborated on a large effort to expand and improve occupational safety and health content in Wikipedia using a platform developed by Wiki Education. This article describes the initiative, student contributions, and evaluations of this effort by instructors from two universities between 2016 and 2020. The Wiki Education platform allowed instructors to set timelines and track students' progress throughout the semester while students accessed training to best expand health content in Wikipedia. Students chose topics in occupational health based on their interests and by a set of topics deemed as a priority by the "WikiProject Occupational Safety and Health." Students' contributions were peer-reviewed by instructors, NIOSH Wikipedians-in-Residence, and traditional Wikipedians. Students presented their projects in class at the end of the semester. Students from both schools expanded 55 articles, created 8 new articles, and translated 2 articles to Spanish, adding 1270 references; these articles were viewed over 8 million times by May 2020. Feedback received from the implementation suggested that students learned about science communication and digital literacy-providing valuable content on occupational health while reducing misinformation in the public domain. The process of identifying and addressing gaps in occupational health in Wikipedia requires participation and engagement toward improving access to information that otherwise would be restricted to the scientific literature, often behind a paywall. The Wikipedia assignment proved to be an engaging approach for instruction and information literacy. It helped students improve their science communication skills and digital literacy, tools that are likely to be critical for successful communication of science in their future careers.

Perchloroethylene and Dry Cleaning: It's Time to Move the Industry to Safer Alternatives.

Perchloroethylene (PERC) is the most common solvent used for dry cleaning in the United States. PERC is a reproductive toxicant, neurotoxicant, potential human carcinogen, and a persistent environmental pollutant. The Environmental Protection Agency is evaluating PERC under the Frank R. Lautenberg Chemical Safety for the 21st Century Act, which amended the Toxic Substances Control Act (amended TSCA), and has mandated that PERC dry cleaning machines be removed from residential buildings. Some local and state programs are also requiring or facilitating transitions to alternative cleaning technologies. However, the potential for these alternatives to harm human health and the environment is not well-understood. This review describes the issues surrounding the use of PERC and alternative solvents for dry cleaning while highlighting the lessons learned from a local government program that transitioned PERC dry cleaners to the safest current alternative: professional wet cleaning. Implications for future public health research and policy are discussed: (1) we must move away from PERC, (2) any transition must account for the economic instability and cultural aspects of the people who work in the industry, (3) legacy contamination must be addressed even after safer alternatives are adopted, and (4) evaluations of PERC alternatives are needed to determine their implications for the long-term health and sustainability of the people who work in the industry.

Exposures in nail salons to trace elements in nail polish from impurities or pigment ingredients - A pilot study.

Nail polishes have evolved considerably. Toxic elements, such as lead, have been found in nail polish, and it is unclear if new finishes using metallic effect pigments may be contributing to metals exposure in nail technicians. We characterized concentrations of trace elements in 40 nail polishes, 9 technicians' urine, and 20 technicians' toenail clippings from 8 nail salons in the Boston area in 2017. We also collected 24 salon surface wipes from 3 of the salons. Antimony was not disclosed as a nail polish ingredient, yet concentrations (<15 µg/g) were above existing cosmetics guidelines (0.5 µg/g) in five (13%) of the samples. Aluminum (<11,450 µg/g), barium (<11,250 µg/g), iron (<3,270 µg/g), and magnesium (<2375 µg/g) were disclosed as ingredients and were also found on salon surfaces where nail polish was stored or used. Heavy metal impurities in nail polish were not detected for cadmium. Lead and nickel were found at low concentrations (<0.40 µg/g lead, <0.67 µg/g nickel). Tin (p = 0.003) concentrations were higher in nail polish with finishes compared to without. Barium and strontium (both p = 0.0001) concentrations were higher for red nail polishes compared to all other colors. Of those elements in nail polish and salon surfaces, aluminum and iron were detected in toenails, manganese was detected in urine and toenails, and barium was detected in urine at comparable levels to the general population. Besides preventable antimony levels in nail polish, individual metals in nail polish did not appear to be from impurities but mainly from colorants (i.e., pigments) and not major contributors to nail technician exposure. It is unclear if low-level chronic metals mixtures in nail salons are of health concern.

Factors affecting lead dust in construction workers' homes in the Greater Boston Area.

Lead is a known reproductive, developmental, and neurological toxicant. Workers with a high likelihood of being exposed to lead at work may inadvertently transport lead home from work, known as "take-home exposure." This is concerning for many workers for whom a workplace intervention is not feasible because their worksites and employers often change, rendering centralized strategies insufficient. This study aimed to better understand the connection between lead in the home of workers living with children and work in construction (n = 23), while other occupations were used as a comparison group (janitorial n = 5, autobody n = 2). Thirty workers living in disadvantaged communities in the Greater Boston area were recruited in 2018-2019 through collaboration with non-profits and worker unions with expertise working with low-income or immigrant workers. Construction workers that performed renovations, bridge constructions, welding, metal work, and demolitions were prioritized during recruitment. During a visit to their residences, a worker questionnaire was administered, and observations and a dust vacuumed sample of the home were collected. Factors predicting lead in home dust were explored by a bivariate analysis and a multivariable regression model. We found lead in homes' dust in the range of 20-8,310 ppm. Homes of construction workers generally had higher and more variable lead dust concentrations (mean 775, max 8,300 ppm) than autobody and janitor worker homes combined (mean 296, max 579 ppm). Five of the construction workers' home lead dust concentrations exceeded US guidelines for yard soil in children's play areas of 400 ppm, and were similar to other studies of homes near lead smelters, superfund sites, or in the Boston area in the early 1990s, pointing to disparities relating to work. Results from the multivariable regression model suggest that lead dust in homes of workers was associated with sociodemographic-, home-, and work-related factors, and pointed to overlapping vulnerabilities; however, a larger sample size is needed to verify findings. Results provide evidence that work-related factors are important to consider when assessing home exposures, and that take-home exposures for workers in lead high-risk jobs such as construction may be an important source of exposure in the home prime for public health intervention at work, home, and community levels.

Overlapping vulnerabilities in workers of the electronics recycling industry formal sector: A commentary.

Vulnerabilities in workers performing electronics recycling (e-recycling) in the informal sector worldwide have been well documented. However, the growing e-recycling industry in the formal sector still brings many challenges to protect the health of workers and their environment. This commentary aims to draw attention to the overlooked vulnerabilities faced by the workers of the e-recycling industry formal sector in high-income countries and discuss the potential impact on health inequalities experienced by these workers. Expanding the definition of vulnerability, not limited to the biological susceptibility to chemical and physical exposures, the demographic characteristics of workers in the e-recycling formal sector often reveal social groups known to be disadvantaged regarding occupational exposures and health effects, including young workers, immigrant or ethnic minorities, and workers with mental or physical health issues or disabilities. Overlapping structural vulnerabilities of the e-recycling industry stem from its newness, its working conditions, its conditions of employment, and the sociodemographic characteristics of its workforce. This phenomenon in high-income countries is not restricted to the e-recycling industry alone. It is rather a symptom of more generalized macro socioeconomical phenomena. The present challenges are in line with the new gig and green economies and changes in the global market, and their consequences on the solid waste sector. Continued efforts to strengthen the inclusion of social aspects of health into the complex interaction of the structural vulnerabilities met by e-recycling workers will be essential to anticipate and prevent health issues in this essential but still emerging workforce.

Adoption of Exposure Assessment Tools to Assist in Providing Respiratory Protection Recommendations.

Selecting a proper respirator requires determining the ratio of an employee's maximum use concentration (MUC) divided by the occupational exposure limit of a chemical. Current industrial hygiene practice often is to obtain a percentile estimate (e.g. 95th) of the measured exposure distribution to apply as the MUC. However, practitioners who are not yet familiar with statistical or mathematical approaches may choose the highest exposure data point as the MUC, a method that is still considered appropriate by the Occupational Safety and Health Administration. Nonetheless, choosing a respirator using the highest exposure data point when only limited data are available may result in not always providing the most adequate respirator. Because some practitioners are not familiar with exposure assessment tools, our primary goal in this study was to demonstrate the best process when selecting respiratory protection by using a combination of exposure data and assessment tools. Three user-friendly tools, IHDataAnalyst, Advanced REACH Tool, and IHSTAT, were selected to demonstrate how to use different types of tool outputs when choosing a respirator. A decision logic was developed to help users navigate the combining of different data inputs. Personal full-shift exposure data collected in four different workplaces were used to describe four different outcomes generated when the maximum exposure data point and the tool's output are compared with the exposure limit of the chemical. Outcomes varied, from determinations of 'high confidence' (or final decision) to 'low confidence' (or indicating more data are needed) in the selection of a respirator recommendation. In conclusion, systematically adopting the combination of exposure data and assessment tools could increase practitioners' confidence in decision-making when choosing respirators from a limited exposure data set. These suggested guidelines will lead practitioners toward good industrial hygiene practices.

Eliminating Take-Home Exposures: Recognizing the Role of Occupational Health and Safety in Broader Community Health.

Toxic contaminants inadvertently brought from the workplace to the home, known as take-home or paraoccupational exposures, have often been framed as a problem that arises due to unsanitary worker behavior. This review article conceptualizes take-home exposures as a public health hazard by (i) investigating the history of take-home contaminants and how they have been studied, (ii) arguing that an ecosocial view of the problem is essential for effective prevention, (iii) summarizing key structural vulnerabilities that lead populations to be at risk, and (iv) discussing future research and prevention effort needs. This article reframes take-home exposures as one of many chronic pathways that contributes to persistent health disparities among workers, their families, and communities. Including the role of work in community health will increase the comprehensiveness of prevention efforts for contaminants such as lead and pesticides that contribute to environmental disparities.

Exposure of Nail Salon Workers to Phthalates, Di(2-ethylhexyl) Terephthalate, and Organophosphate Esters: A Pilot Study.

Relatively little is known about the exposure of nail technicians to semivolatile organic compounds (SVOCs) in nail salons. We collected preshift and postshift urine samples and silicone wrist bands (SWBs) worn on lapels and wrists from 10 female nail technicians in the Boston area in 2016-17. We analyzed samples for phthalates, phthalate alternatives, and organophosphate esters (OPEs) or their metabolites. Postshift urine concentrations were generally higher than preshift concentrations for SVOC metabolites; the greatest change was for a metabolite of the phthalate alternative di(2-ethylhexyl) terephthalate (DEHTP): mono(2-ethyl-5-carboxypentyl) terephthalate (MECPTP) more than tripled from 11.7 to 36.6 µg/g creatinine. DEHTP biomarkers were higher in our study participants' postshift urine compared to 2015-2016 National Health and Nutrition Examination Survey females. Urinary MECPTP and another DEHTP metabolite were moderately correlated (r = 0.37-0.60) with DEHTP on the SWBs, suggesting occupation as a source of exposure. Our results suggest that nail technicians are occupationally exposed to certain phthalates, phthalate alternatives, and OPEs, with metabolites of DEHTP showing the largest increase across a work day. The detection of several of these SVOCs on SWBs suggests that they can be used as a tool for examining potential occupational exposures to SVOCs among nail salon workers.

Biological and environmental exposure monitoring of volatile organic compounds among nail technicians in the Greater Boston area.

Nail technicians are exposed to volatile organic compounds (VOCs) from nail products, but no studies have previously measured VOC biomarkers for these workers. This study of 10 nail technicians aimed to identify VOCs in nail salons and explore relationships between air concentrations and biomarkers. Personal and area air samples were collected using thermal desorption tubes during a work shift and analyzed using gas chromatography/mass spectrometry (GC/MS) for 71 VOCs. Whole blood samples were collected pre-shift and post-shift, and analyzed using GC/MS for 43 VOCs. Ventilation rates were determined using continuous CO2 measurements. Predominant air VOC levels were ethyl methacrylate (median 240 µg/m3 ), methyl methacrylate (median 205 µg/m3 ), toluene (median 100 µg/m3 ), and ethyl acetate (median 639 µg/m3 ). Blood levels were significantly higher post-shift than pre-shift for toluene (median pre-shift 0.158 µg/L and post-shift 0.360 µg/L) and ethyl acetate (median pre-shift <0.158 µg/L and post-shift 0.510 µg/L); methacrylates were not measured in blood because of their instability. Based on VOCs measured in these seven nail salons, we estimated that emissions from Greater Boston area nail salons may contribute to ambient VOCs. Ventilation rates did not always meet the ASHRAE guideline for nail salons. There is a need for changes in nail product formulation and better ventilation to reduce VOC occupational exposures.

Phthalate and Organophosphate Plasticizers in Nail Polish: Evaluation of Labels and Ingredients.

In the 2000s, nail polish manufacturers started promoting "3-Free" products, phasing out three widely publicized toxic chemicals: toluene, formaldehyde, and dibutyl phthalate (DnBP). However, DnBP was sometimes replaced by another endocrine-disrupting plasticizer, triphenyl phosphate (TPHP). Many new " n-Free" labels have since appeared, without any standardization on which n chemicals are excluded. This study aimed to compare measured plasticizer content against nail polish labels. First, we summarized definitions of labels. Then, we measured 12 phthalate and 10 organophosphate plasticizers in 40 nail polishes from 12 brands selected for popularity and label variety. We found labels ranging from 3- to 13-Free; 10-Free was the most inconsistently defined (six definitions). Our samples contained TPHP and bis(2-ethylhexyl) phthalate (DEHP) at up to 7940 and 331 µg/g, respectively. The 5- to 13-Free samples had lower TPHP levels than unlabeled or 3-Free samples (median <0.002 vs 3730 µg/g, p < 0.001). The samples that did not contain TPHP had higher DEHP levels (median 68.5 vs 1.51 µg/g, p < 0.05). We measured plasticizers above 100 µg/g in five brands that did not disclose them and in two that excluded them in labels. This study highlights inconsistencies in nail polish labels and identifies TPHP and DEHP as ingredient substitutes for DnBP.

Occupational exposure to polybrominated diphenyl ethers (PBDEs) and other flame retardant foam additives at gymnastics studios: Before, during and after the replacement of pit foam with PBDE-free foams.

Coaches spend long hours training gymnasts of all ages aided by polyurethane foam used in loose blocks, mats, and other padded equipment. Polyurethane foam can contain flame retardant additives such as polybrominated diphenyl ethers (PBDEs), to delay the spread of fires. However, flame retardants have been associated with endocrine disruption and carcinogenicity. The National Institute for Occupational Safety and Health (NIOSH) evaluated employee exposure to flame retardants in four gymnastics studios utilized by recreational and competitive gymnasts. We evaluated flame retardant exposure at the gymnastics studios before, during, and after the replacement of foam blocks used in safety pits with foam blocks certified not to contain several flame retardants, including PBDEs. We collected hand wipes on coaches to measure levels of flame retardants on skin before and after their work shift. We measured flame retardant levels in the dust on window glass in the gymnastics areas and office areas, and in the old and new foam blocks used throughout the gymnastics studios. We found statistically higher levels of 9 out of 13 flame retardants on employees' hands after work than before, and this difference was reduced after the foam replacement. Windows in the gymnastics areas had higher levels of 3 of the 13 flame retardants than windows outside the gymnastics areas, suggesting that dust and vapor containing flame retardants became airborne. Mats and other padded equipment contained levels of bromine consistent with the amount of brominated flame retardants in foam samples analyzed in the laboratory. New blocks did not contain PBDEs, but did contain the flame retardants 2-ethylhexyl 2,3,4,5-tetrabromobenzoate and 2-ethylhexyl 2,3,4,5-tetrabromophthalate. We conclude that replacing the pit foam blocks eliminated a source of PBDEs, but not 2-ethylhexyl 2,3,4,5-tetrabromobenzoate and 2-ethylhexyl 2,3,4,5-tetrabromophthalate. We recommend ways to further minimize employee exposure to flame retardants at work and acknowledge the challenges consumers have identifying chemical contents of new products.

Occupational exposures to new dry cleaning solvents: High-flashpoint hydrocarbons and butylal.

The dry cleaning industry is moving away from using perchloroethylene. Occupational exposures to two alternative dry cleaning solvents, butylal and high-flashpoint hydrocarbons, have not been well characterized. We evaluated four dry cleaning shops that used these alternative solvents. The shops were staffed by Korean- and Cantonese-speaking owners, and Korean-, Cantonese-, and Spanish-speaking employees. Because most workers had limited English proficiency we used language services in our evaluations. In two shops we collected personal and area air samples for butylal. We also collected air samples for formaldehyde and butanol, potential hydrolysis products of butylal. Because there are no occupational exposure limits for butylal, we assessed employee health risks using control banding tools. In the remaining two shops we collected personal and area air samples for high-flashpoint hydrocarbon solvents. In all shops the highest personal airborne exposures occurred when workers loaded and unloaded the dry cleaning machines and pressed dry cleaned fabrics. The air concentrations of formaldehyde and butanol in the butylal shops were well below occupational exposure limits. Likewise, the air concentrations of high-flashpoint hydrocarbons were also well below occupational exposure limits. However, we saw potential skin exposures to these chemicals. We provided recommendations on appropriate work practices and the selection and use of personal protective equipment. These recommendations were consistent with those derived using control banding tools for butylal. However, there is insufficient toxicological and health information to determine the safety of butylal in occupational settings. Independent evaluation of the toxicological properties of these alternative dry cleaning solvents, especially butylal, is urgently needed.

A Pilot Assessment of Occupational Health Hazards in the US Electronic Scrap Recycling Industry.

The National Institute for Occupational Safety and Health (NIOSH) surveyed a randomly selected sample of electronic scrap (e-scrap) recycling facilities nationwide to characterize work processes, exposures, and controls. Despite multiple attempts to contact 278 facilities, only 47 responded (17% response rate). Surveyed facilities reported recycling a wide variety of electronics. The most common recycling processes were manual dismantling and sorting. Other processes included shredding, crushing, and automated separation. Many facilities reported that they had health and safety programs in place. However, some facilities reported the use of compressed air for cleaning, a practice that can lead to increased employee dust exposures, and some facilities allowed food and drinks in the production areas, a practice that can lead to ingestion of contaminants. Although our results may not be generalizable to all US e-scrap recycling facilities, they are informative regarding health and safety programs in the industry. We concluded that e-scrap recycling has the potential for a wide variety of occupational exposures particularly because of the frequent use of manual processes. On-site evaluations of e-scrap recyclers are needed to determine if reported work processes, practices, and controls are effective and meet current standards and guidelines. Educating the e-scrap recycling industry about health and safety best practices, specifically related to safe handling of metal dust, would help protect employees.

Assessing occupational exposure to sea lamprey pesticides.

BACKGROUND: Sea lampreys are parasitic fish found in lakes of the United States and Canada. Sea lamprey is controlled through manual application of the pesticides 3-trifluoromethyl-4-nitrophenol (TFM) and Bayluscide(TM) into streams and tributaries. 3-Trifluoromethyl-4-nitrophenol may cause irritation and central nervous system depression and Bayluscide may cause irritation, dermatitis, blisters, cracking, edema, and allergic skin reactions. OBJECTIVES: To assess occupational exposures to sea lamprey pesticides. METHODS: We developed a wipe method for evaluating surface and skin contamination with these pesticides. This method was field tested at a biological field station and at a pesticide river application. We also evaluated exposures using control banding tools. RESULTS: We verified TFM surface contamination at the biological station. At the river application, we found surfaces and worker's skin contaminated with pesticides. CONCLUSION: We recommended minimizing exposures by implementing engineering controls and improved use of personal protective equipment.

Protection efficacy of gloves against components of the solvent in a sprayed isocyanate coating utilizing a reciprocating permeation panel.

OBJECTIVES: Determine protection effectiveness of 5-mil natural rubber latex (0.13-mm), 5-mil nitrile rubber (0.13-mm), and 13-mil butyl rubber (0.33-mm) glove materials against solvents present in a commonly used automotive clear coat formulation using a novel permeation panel. The latex and nitrile gloves were the type commonly used by local autobody spray painters. METHODS: Glove materials were tested by spraying an automotive clear coat onto an automated reciprocating permeation panel (permeation panel II). Temperature, relative humidity, and spray conditions were controlled to optimize clear coat loading homogeneity as evaluated by gravimetric analysis. Solvent permeation was measured using charcoal cloth analyzed by the National Institute for Occupational Safety and Health 1501 method. RESULTS: Natural rubber latex allowed 3-5 times the permeation of solvents relative to nitrile rubber for all 10 solvents evaluated: ethyl benzene, 2-heptanone, 1-methoxy-2-propyl acetate, o-xylene, m-xylene, p-xylene, n-butyl acetate, methyl isobutyl ketone, petroleum distillates, and toluene. There is a distinct behavior in solvent permeation before and after the coating dry time. Solvent permeation increased steadily before coating dry time and remained fairly constant after coating dry time. Butyl was not permeated by any of the solvents under the conditions tested. CONCLUSIONS: Commonly used 5-mil thick (0.13-mm) latex and nitrile gloves were ineffective barriers to solvents found in a commonly used clear coat formulation. Conversely, 13-mil (0.33-mm) butyl gloves were found to be protective against all solvents in the clear coat formulation.

Testing of glove efficacy against sprayed isocyanate coatings utilizing a reciprocating permeation panel.

OBJECTIVES: Modify a permeation panel to evaluate dermal protective clothing for resistance to sprayed coatings with minimal variability in spray paint loading across the test panel. Determine isocyanate protection effectiveness of natural rubber latex (5 mil or 0.13mm), nitrile rubber (5 mil or 0.13mm), and butyl rubber (13 mil or 0.33mm) glove materials against a commonly used automotive clear coat formulation. The latex and nitrile gloves were the type used by the local autobody spray painters. METHODS: Glove materials were tested by spraying paint onto an automated reciprocating permeation panel (permeation panel II). Temperature, relative humidity, and spray conditions were controlled to optimize paint loading homogeneity as evaluated by gravimetric analysis. Isocyanate permeation was measured using 1-(2-pyridyl)-piperazine-coated fiber-glass filters analyzed by a modified version of the OSHA 42/PV2034 methods. RESULTS: Latex exhibited a higher permeation rate compared with nitrile for isocyanates (1,6-hexamethylene diisocyanate (HDI) and isophorone diisocyanate monomers) and both materials presented permeation at all of the time points suggesting a fast isocyanate breakthrough. Butyl material exhibited no permeation or breakthrough for isocyanates under the tested conditions. The spray application at 69±8°F was optimally homogeneous at 45±0.5mg weight of dry clear coat per 5cm(2). CONCLUSIONS: The permeation panel II is a reliable method to assess dermal protective clothing performance against polymerizing coatings. Commonly used 5-mil (0.13-mm) latex and nitrile gloves were determined to be ineffective barriers against the isocyanates found in a commonly used clear-coat formulation while butyl gloves were protective.