Overcoming the Limits of Flash Nanoprecipitation: Effective Loading of Hydrophilic Drug into Polymeric Nanoparticles with Controlled Structure.

Flash nanoprecipitation (FNP) is a widely used technique to prepare particulate carriers based on various polymers, and it was proven to be a promising technology for the industrial production of drug loaded nanoparticles. However, up to now, only its application to hydrophobic compounds has been deeply studied and the encapsulation of some strongly hydrophilic compounds, such as caffeine, remains a challenge. Caffeine loaded poly-ε-caprolactone (PCL) nanoparticles were produced in a confined impinging jet mixer using acetone as the solvent and water as the antisolvent. Caffeine was dissolved either in acetone or in water to assess the effects of two different process conditions. Nanoparticles properties were assessed in terms of loading capacity (LC%), encapsulation efficiency (EE%), and in vitro release kinetics. Samples were further characterized by dynamic light scattering, scanning electron microscopy, X-ray photo electron spectroscopy, and infrared spectroscopy to determine the size, morphology, and structure of nanoparticles. FNP was proved an effective technique for entrapping caffeine in PCL and to control its release behavior. The solvent used to solubilize caffeine influences the final structure of the obtained particles. It was observed that the active principle was preferentially adsorbed at the surface when using acetone, while with water, it was embedded in the matrix structure. The present research highlights the possibility of extending the range of applications of FNP to hydrophilic molecules.

Optimization of 1D ZnO@TiO2 core-shell nanostructures for enhanced photoelectrochemical water splitting under solar light illumination.

A fast and low-cost sol-gel synthesis used to deposit a shell of TiO2 anatase onto an array of vertically aligned ZnO nanowires (NWs) is reported in this paper. The influence of the annealing atmosphere (air or N2) and of the NWs preannealing process, before TiO2 deposition, on both the physicochemical characteristics and photoelectrochemical (PEC) performance of the resulting heterostructure, was studied. The efficient application of the ZnO@TiO2 core-shells for the PEC water-splitting reaction, under simulated solar light illumination (AM 1.5G) solar light illumination in basic media, is here reported for the first time. This application has had a dual function: to enhance the photoactivity of pristine ZnO NWs and to increase the photodegradation stability, because of the protective role of the TiO2 shell. It was found that an air treatment induces a better charge separation and a lower carrier recombination, which in turn are responsible for an improvement in the PEC performance with respect to N2-treated core-shell materials. Finally, a photocurrent of 0.40 mA/cm(2) at 1.23 V versus RHE (2.2 times with respect to the pristine ZnO NWs) was obtained. This achievement can be regarded as a valuable result, considering similar nanostructured electrodes reported in the literature for this application.

Dynamic light scattering and X-ray photoelectron spectroscopy characterization of PEGylated polymer nanocarriers: internal structure and surface properties.

In this work, nanospheres and nanocapsules are precipitated in confined impinging jet mixers through solvent displacement and characterized. Acetone and water are used as the solvent and antisolvent, respectively, together with polymethoxypolyethylene glycol cyanoacrylate-co-hexadecylcyanoacrylate and Miglyol as the copolymer and oil, respectively. Characterization is performed with dynamic light scattering, with electrophoretic measurements, and for the first time with X-ray photoelectron spectroscopy. Results show that the presence of polyethylene glycol chains seems to be more pronounced on the surface of nanospheres than on that of nanocapsules. The thickness of the copolymer layer in nanocapsules ranges from 1 to 10 nm, depending on the value of the oil:copolymer mass ratio. Fast dilution is confirmed to have a positive effect in suppressing aggregation but can induce further copolymer precipitation.

Morphology of monolayer MgO films on Ag(100): switching from corrugated islands to extended flat terraces.

The ability to engineer nearly perfect ultrathin oxide layers, up to the limit of monolayer thickness, is a key issue for nanotechnological applications. Here we face the difficult and important case of ultrathin MgO films on Ag(100), for which no extended and well-ordered layers could thus far be produced in the monolayer limit. We demonstrate that their final morphology depends not only on the usual growth parameters (crystal temperature, metal flux, and oxygen partial pressure), but also on aftergrowth treatments controlling so far neglected thermodynamics constraints. We thus succeed in tuning the shape of the oxide films from irregular, nanometer-sized, monolayer-thick islands to slightly larger, perfectly squared, bilayer islands, to extended monolayers limited apparently only by substrate steps.

The behaviour of an old catalyst revisited in a wet environment: Co ions in APO-5 split water under mild conditions.

Samples of the activated microporous aluminophosphate Co-APO-5, featuring ca. 20% of Co(3+) cations, when immersed in water evolve molecular oxygen at room temperature in an endothermic process, without the need for either light or a sacrificial reactant. Successive drying of the sample at temperatures around 520 K releases molecular hydrogen, with recovery of the initial conditions. Several hydration-dehydration cycles may be performed without loss of activity, i.e. water is split in a thermal cycle under relatively mild conditions.

Length-dependent charge generation from vertical arrays of high-aspect-ratio ZnO nanowires.

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free-standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high-aspect-ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.