Structural Rearrangement Followed by Entrapment of Subnanometer Building Blocks of Iron Oxyhydroxide in Aqueous Iron Chloride Solutions.

Iron oxyhydroxide, a natural nanophase of iron found in the environment, plays a crucial role in regulating surface and groundwater composition. Recent research proposes that within the nonclassical prenucleation cluster growth model, subnanometer-sized clusters (olation clusters/Fe13 δ-Keggin oxolation clusters) might act as the prenucleation clusters (PNCs) of ferrihydrite or iron oxyhydroxide solid phase. However, these clusters are difficult to characterize as they are only observable momentarily in low-pH, high-Fe concentration solutions before agglomerating into extended solids, keeping the controversy over the true nature of the PNCs alive. In this study, we introduce large quantities of zinc acetate salt (ZA) into iron chloride solutions at the olation-oxolation boundary (3.6 mM Fe3+ at pH ∼2.6). Remarkably, this manipulation is found to alter the structural arrangement of these subnanometer clusters before blocking them in isolation for hours, even at pH 6, where extended iron oxyhydroxide phases typically precipitate. On the other hand, controlled addition of ZA allows partial unblocking, leading to anisotropic agglomeration into cylindrical rod-like structures. Experimental techniques such as synchrotron-based small-angle X-ray scattering, X-ray absorption spectroscopy, high-resolution transmission electron microscopy (TEM), and cryo-TEM, along with density functional theory (DFT) calculations, reveal the nature of the structural rearrangement and the crucial role of Zn2+ ions in cluster stabilization.

Synthesis of Ion-Exchange Catalysts by Introduction of Fluorinated Ponytails into Novel Mesoporous Polymers.

A novel synthetic procedure for the functionalisation of styrenic cross-linked polymers with perfluorinated acyl chains has been reported. The effective significant grafting of the fluorinated moieties is supported by {1H}-13C and {19F}-13C NMR characterisations. This kind of polymer appears promising as catalytic support for a variety of reactions requiring a highly lipophilic catalyst. Indeed, the improved lipophilicity of the materials resulted in enhanced catalytic properties of the corresponding sulfonic materials in the reaction of esterification of a solution in a vegetable oil of stearic acid with methanol.

Cross-Linked Polymers as Scaffolds for the Low-Temperature Preparation of Nanostructured Metal Oxides.

The current state of the art of the use of cross-linked organic polymers, both insoluble (resins or gels) and soluble (micro- and nanogels), as aids for the low-temperature preparation of stable metal oxide nanoparticles or nanostructured metal oxides is reviewed herein. Synthetic strategies for inorganic oxide nanomaterials of this kind can greatly benefit from the use of cross-linked polymers, which may act as scaffolds/exotemplates during inorganic nanoparticle synthesis, or as stabilizers following post-synthetic modification of the nanoparticles. Furthermore, the peculiar properties of the organic cross-linked polymers add to those of the inorganic oxide nanoparticles, producing materials with combined properties. The potential applications of such highly promising composite nanomaterials will be also briefly sketched.

Effect of the Sulfonation on the Swollen State Morphology of Styrenic Cross-Linked Polymers.

The chemical structure and morphology of a set of sulfonic gel-type poly(styrene-divinylbenzene) resins (2 mol% DVB) prepared with different synthetic approaches were investigated by solid state NMR, Inverse Size Exclusion Chromatography (ISEC), FT-IR and elemental analysis to compare their swollen state structure. FT-IR and solid state NMR clearly show that the sulfonation mainly occurs in the para- position with respect the main polymer chain. Sensible proportions of sulfone bridges were found in the materials obtained with oleum and chlorosulfonic acid. With oleum, the presence of the sulfone bridges is clearly associated to a reduced ability to swell in the water medium relative to the proton exchange capacity. This highlights the cross-linking action of the sulfone bridges according to ISEC results, showing a high proportion of a dense polymer fraction in the swollen material. An even higher degree of sulfone-bridging, lower swelling ability, and a high proportion of a dense polymer fraction in the swollen material are found in the resin obtained with chlorosulfonic acid. As a matter of fact, Cross Polarization Magic Angle Spinning Nuclear Magnetic Resonance (CP-MAS 13C-NMR), elemental analysis, and ion exchange capacity, show that oleum and chlorosulfonic acid produced resins with remarkably smaller pores and lower swollen gel volume in polar solvents, with respect to concentrated sulfuric acid.

Pd Metal Catalysts for Cross-Couplings and Related Reactions in the 21st Century: A Critical Review.

Cross-couplings and related reactions are a class of highly efficient synthetic protocols that are generally promoted by molecular Pd species as catalysts. However, catalysts based on more or less highly dispersed Pd metal have been also employed for this purpose, and their use, which was largely limited to the Heck reaction until the turn of the century, has been extended in recent years to most reactions of this class. This review provides a critical overview on these recent applications of Pd metal catalysts. Particular attention is devoted to the discussion of the mechanistic pathways that have been proposed to explain the catalytic role of Pd metal. Furthermore, the most outstanding Pd metal based catalytic systems that have emerged are illustrated, together with the development of novel approaches to boost the reactivity of Pd metal. A section summarizing the current industrial applications of Pd metal catalyzed reactions of this kind concludes the review.

Synthesis of nanocomposites from Pd(0) and a hyper-cross-linked functional resin obtained from a conventional gel-type precursor.

Hyper-cross-linked resins stemming from a gel-type poly-chloromethylated poly(styrene-co-divinylbenzene) resin (GT) have been investigated by a multi-methodological approach based on elemental analysis, scanning electron microscopy, X-ray microanalysis, and solvent absorption. The hyper-cross-linking of the parent resin was accomplished by Friedel-Crafts alkylation of the phenyl rings of the resins with the chloromethyl groups. This produced a permanent pore system comprising both micropores (<2.0 nm in diameter) and mesopores (2.2 nm). The chloromethyl groups that did not react in the hyper-cross-linking step were transformed into methylmercaptan groups and the latter were then converted into sulfonic groups by oxidation with hydrogen peroxide. By this procedure the extensive permanent porosity of the parent unsulfonated hyper-cross-linked polymer (HGT) was retained by the sulfonated polymer (HGTS). The final exchange capacity of HGTS was determined to be 0.36 mmol g(-1). HGTS was easily metalated with Pd(II) and the subsequent reduction of the metal centers with either aqueous sodium borohydride, formaldehyde, or dihydrogen produced three Pd(0)/HGTS nanocomposites. The metal nanoparticles had diameters in the 1-6 nm range for all the nanocomposites, as determined by TEM, but with somewhat different distributions. When formaldehyde was used, more than 90% of the nanoparticles were less than 3 nm and their radial distribution throughout the polymer beads was quite homogeneous. These findings show that with this reducing agent the metal nanoparticles are generated within the pore system of the polymer matrix, hence their size is controlled by the dimensions of the pores of the polymeric support.

Highly hydrophilic copolymers of N,N-dimethylacrylamide, acrylamido-2-methylpropanesulfonic acid, and ethylenedimethacrylate: nanoscale morphology in the swollen state and use as exotemplates for synthesis of nanostructured ferric oxide.

The polymer framework of water-swollen copolymers of N,N-dimethylacrylamide, acrylamido-2-methylpropanesulfonic acid, and ethylenedimethacrylate (nominal cross-linking degrees of 4, 8, and 20 mol %) is composed of highly expanded domains, with "pores" not less than 6 nm in diameter. When the 4% cross-linked copolymer (DAE 26-4) is swollen with a 10(-4) M solution of 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL) in water, MeOH, EtOH, or nBuOH, the molecules of the paramagnetic probe rotate rapidly (τ<1000 ps) and as fast as in the bulk liquid in the case of water. The swelling degree of DAE 26-4 is related to the Hansen solubility parameters of a number of liquids, including linear alcohols up to n-octanol. It is also found that the rotational correlation time of TEMPOL in the copolymer swollen by water and the lightest alcohols increases with decreasing specific absorbed volume. Time-domain NMR spectrometry of water-swollen DAE 26-4 shows that sorption of only 14% of the liquid required for its complete swelling is enough for full hydration of the polymer chains. Accordingly, in fully swollen DAE 26-4 the longitudinal relaxation time of water closely approaches the value of pure water. {(13)C} CP-MAS NMR on partially and fully water swollen samples of DAE 26-4 shows that swelling increases the mobility of the polymer chains, as clearly indicated by the narrowing of the best-resolved peaks. DAE 26-4 was used as an exotemplate for the synthesis of nanocomposites composed of the polymer and nanostructured Fe(2)O(3) through a series of ion-exchange/precipitation cycles. After the first cycle the nanoparticles are 3-4 nm in diameter, with practically unchanged size after subsequent cycles (up to five). In fact, the nanoparticle size never exceeded the diameter of the largest available pores. This suggests that the polymer framework controls the growth of the nanoparticles according to the template-controlled synthesis scheme. Selected-area electron diffraction, TEM, and high-resolution electron microscopy show that the nanostructured inorganic phase is composed of hematite.

Characterisation of solute mobility in hypercross-linked resins in solvents of different polarity: two promising supports for catalysis.

Two hypercross-linked resins stemming from a gel-type poly-chloromethylated styrene-divinylbenzene resin (GT) in beaded form are investigated with a combination of spectroscopic techniques (EPR and time-domain (TD)-NMR spectroscopy) to evaluate their use as supports for the development of operationally flexible heterogeneous metal catalysts, suitable to be employed in liquid and gas phase. The first resin (HGT) is the direct product of the hypercross-linking reaction, whereas the second one (HGS) is the sulphonated analogue of HGT obtained by exchanging approximately 3 wt % of the chloromethyl groups with sulphonic groups. HGT and HGS absorb both polar and apolar solvents in the permanent nanoporosity created by the hypercross-linking, and NMR data highlight that the pore size is not affected by the different properties of the investigated liquid media. The EPR analysis of the dry resins reveals that during the hypercross-linking process paramagnetic species are formed in the HGT beads, which persist in the sulphonated resin. The mobility of solutes inside the polymers framework was investigated with EPR spectroscopy upon soaking the resins with solutions of two spin probes (2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL)) in THF, toluene, n-heptane and water. The EPR spectra show that, depending on the solvent, the two resins can act as sorbents, able to trap the solutes in the polymer framework, or as simple supports that allow free diffusion of the solutes. Our results suggest that HGT and HGS are promising supporting materials for metal catalysts, provided one chooses carefully the solvent to be employed for the catalysed reaction as this choice strongly affects the mobility of the substrates and, thus their effective reactivity.

Synthesis and catalytic activity of metal nanoclusters inside functional resins: an endeavour lasting 15 years.

Cross-linked functional polymers (functional resins) are versatile, designable and useful supports for metal nanoclusters that are able to provide reasonably thermally and mechanically stable multi-functional metal catalysts characterized by good activity and selectivity. The paper reviews authors' contributions to the field from the early 1990s to the present.