European Organization for Caries Research Workshop: Methodology for Determination of Potentially Available Fluoride in Toothpastes.

Toothpastes are the most universally accepted form of fluoride delivery for caries prevention. To provide anti-caries benefits, they must be able to release fluoride during the time of tooth brushing or post brushing into the oral cavity. However, there is no standard accepted procedure to measure how much fluoride in a toothpaste may be (bio) available for release. The European Organization for Caries Research proposed and supported a workshop with experts in fluoride analysis in toothpastes and representatives from industry. The objective of the workshop was to discuss issues surrounding fluoride analysis in toothpaste and reach consensus on terminology and best practices, wherever the available evidence allowed it. Participants received a background paper and heard presentations followed by structured discussion to define the problem. The group also reviewed evidence on the validity, reliability and feasibility of each technique (namely chromatography and fluoride electroanalysis) and discussed their strengths and limitations. Participants were able to reach a consensus on terminology and were also able to identify and summarize the advantages and disadvantages of each technique. However, they agreed that most currently available methods were developed for regulatory agencies several decades ago, utilizing the best available data from clinical trials then, but require to be updated. They also agreed that although significant advances to our understanding of the mechanism of action of fluoride in toothpaste have been achieved over the past 4 decades, this clearly is an extraordinarily complex subject and more work remains to be done.

Method for the determination of beta-carotene in supplements and raw materials by reversed-phase liquid chromatography: single laboratory validation.

A single laboratory validation (SLV) study was conducted for a liquid chromatography (LC) method for the determination of total and all-trans-beta-carotene in a variety of dietary supplements, including multivitamin tablets, softgels, capsules, and beadlet raw materials. Extraction variants were developed for the different types of supplements tested based upon the supplement type and level of beta-carotene. Water dispersible formulations such as powders, emulsions, tablets, and capsules were enzymatically digested with protease and extracted with dichloromethane-ethanol. Oily suspensions were directly dissolved in dichloromethane-ethanol. After appropriate dilution or concentration, the extracts were chromatographed by using either a reversed-phase C18 column or, in products containing high amounts of alpha-carotene, a reversed-phase C30 column. The LC systems provided linear responses in the range of 0.1-50 microg beta-carotene/mL. The main geometrical isomers of beta-carotene (all-trans, 9-cis, 13-cis, and 15-cis) were well separated from each other and from other carotenoids such as a-carotene, cryptoxanthin, lutein, lycopene, and zeaxanthin. Duplicate determinations of total beta-carotene performed by 2 technicians in 8 different test materials on 5 different days resulted in relative standard deviations of 1.2-4.4%. Recoveries determined for supplements and beadlet raw material spiked with beta-carotene levels of 10 microg to 100 mg/test portion and 0.2-40%, respectively, ranged from 97.5 to 102.1%. On the basis of the accuracy, precision, and recovery results from the SLV study, the method is suggested for a collaborative study on the determination of total and all-trans-beta-carotene in dietary supplements.

Improving the detection limit of anion-selective electrodes: an iodide-selective membrane with a nanomolar detection limit.

The lower detection limit and the selectivity behavior of anion-selective electrodes (ISEs) are improved by using optimized inner solutions and membrane compositions. With a membrane based on the recently described ionophore [9]mercuracarborand-3, a detection limit of 2 x 10(-9) M has been achieved for iodide. Nevertheless, the improvements are less pronounced than in the case of cation ISEs. This is mainly due to the fact that so far no anion ISE is known with the extremely high selectivities of cation ISEs. If the membrane does not contain an ionophore, leaching of the ion exchanger from the membrane into the sample is also a relevant limiting factor except for ion exchangers of very high lipophilicity.

Plasticizer-free polymer containing a covalently immobilized Ca2+-selective ionophore for potentiometric and optical sensors.

A derivative of a known Ca2+-selective ionophore, ETH 129, was synthesized to contain a polymerizable acrylic moiety (AU-1) and covalently grafted into a methyl methacrylate-co-decyl methacrylate polymer matrix. The polymer containing AU-1 was prepared via a simple one-step homogeneous polymerization method. It exhibited mechanical properties suitable for the fabrication of plasticizer-free ion-selective membrane electrodes and bulk optode films by solvent-casting and spin-coating techniques, respectively. The segmented sandwich membrane technique was utilized to assess the binding constant of free and covalently bound ionophores to calcium and to study their diffusion coefficients in the membrane phase. Diffusion was greatly diminished for the bound ionophore. This was confirmed in ion-selective electrode membranes containing no calcium ions in the inner solution, which should normally show apparent super-Nernstian response slopes in dilute calcium solutions. The response slope was Nernstian down to submicromolar concentration levels, indicating slow mass transport of calcium in the membrane. Optical-sensing films with the new copolymer matrix, unblended and blended with PVC-DOS, also confirmed that covalently bound ionophores are fully functional for maintaining selective ion extraction and binding properties of the sensing membrane.

Role of fulvic acid on lead bioaccumulation by Chlorella kesslerii.

To better understand the relationship between lead speciation and bioavailability in natural freshwaters, the interaction of lead with the freshwater alga Chlorella kesslerii was studied in the presence of the Suwannee River fulvic acid (SRFA). Special attention was paid to direct interactions of the fulvic acid on the algae, as well as potential physiological (membrane permeability and algal metabolism) influences. Lead-free ion concentration measurements were carried out using a novel ion-selective electrode. Pb uptake decreased in the presence of SRFA with respect to noncomplexed Pb, but uptake fluxes, cellular Pb, Pb bound to the transport sites, and total adsorbed Pb were all higher than predicted from Pb2+ activities, in accordance with the free ion activity model (FIAM). The discrepancies between the observed values and those predicted by the FIAM in the presence and absence of synthetic ligands increased with increasing concentration of SRFA. Several hypotheses were examined to explain the observed differences. No contributions of labile and/or hydrophobic Pb-SRFA complexes were found. Furthermore, direct biological effects, including variations in membrane permeability or algal metabolism, could not account for the observations. On the other hand, changes in the algal surface charge due to SRFA adsorption seemed to account, at least partially, for the observed increase in lead uptake in the presence of SRFA as compared to that corresponding to the same Pb2+ concentration in the presence of synthetic ligands.

Mechanistic insights into the development of optical chloride sensors based on the [9]mercuracarborand-3 ionophore.

Fluorescent sensing microspheres based on perhaps the most selective and practically useful chloride ionophore known, the recently reported [9]mercuracarborand-3 (MC-3), have been prepared and optimized for physiological measurements. In initial work, this ionophore was shown to yield functional optical sensing films in combination with an electrically neutral chromoionophore, ETH 5418. Unfortunately, however, these optodes suffered from unacceptably high levels of sodium interference under physiological conditions. To better understand the sensing mechanism, optical and potentiometric binding experiments were used to characterize the stoichiometry and the complex formation constants for this ionophore. It was found that the preferred stoichiometry is 1:2, rather than 1:1 as assumed earlier. The 1:2 complex is extremely stable (logbeta2 = 13.4), but a relatively strong 1:1 complex also exists (log K1 = 9.9). These characteristics were used to fabricate chloride optodes that make use of the stepwise ion-ionophore decomplexation equilibrium, by adding a calculated amount of lipophilic anion exchanger to the polymer film. Such optodes showed dramatically reduced sodium interference while maintaining the excellent selectivity of the traditional formulation. The optimized composition also shifted the measuring range to physiological conditions, making them useful for the assessment of chloride in undiluted and 10-fold-diluted blood at pH 7.4. After necessary alterations of the particle preparation procedure and sensor formulation, the new insights were used to fabricate mass-produced optical sensing microspheres with characteristics essentially identical to those of the optode sensing films.

Rational design of potentiometric trace level ion sensors. A Ag+-selective electrode with a 100 ppt detection limit.

Submicromolar to picomolar lower detection limits have recently been obtained with various polymer membrane ion-selective electrodes by minimizing biases due to ion fluxes through the membrane. For the best performance, the compositions of the membrane and inner solution should be optimized for each application. Given the number of parameters to be adjusted, it has been difficult to find the best parameters for a target sample. In this paper, a much simplified and more practical steady-state model of zero-current ion fluxes is derived, which is based on measurable parameters. The model allows one to predict achievable lower detection limits for a membrane with given selectivities. It can also be used to predict the optimal composition of the inner filling solution for the measurement of samples with a known, typical ionic background. Selectivity coefficients of monovalent and divalent analyte ions required for desired detection limits in drinking water are calculated. As an application of the proposed general recipe, a silver-selective electrode is developed on the basis of the ionophore O,O''-bis[2-(methylthio)ethyl]-tert-butylcalix[4]arene. With the predicted optimal composition of the inner electrolyte, its lower detection limit is found to be 10(-9) M or 100 ppt Ag+ with an ionic background of 10(-5) M LiNO3, which is very close to the expected value.