Microhardness and Microstructure Analysis of the LPBF Additively Manufactured 18Ni300.

This research focuses on analysing the 18Ni300 maraging steel produced through laser powder bed fusion. Specifically, it aims to examine the phase components using X-ray diffraction, the microstructure through scanning electron microscopy, and the hardness of the different structures present in the manufactured material. The primary goal is to meticulously analyse the material and its microstructures. By doing so, a correlation between the hardness and each structure type, be it cellular or columnar, can be established. This will allow us to pinpoint any defects in the material before any surface chemical treatment is carried out and facilitate a thorough examination of its microstructure. A consistent pattern emerges across the samples through systematic measurement of microhardness distribution in various locations and detailed examination of the structure. The findings of the study reveal that the hardness of cellular and columnar structures exhibits a significant variation based on the location of the measurement about cell boundaries. The hardness value is notably higher in the combination of cellular and multiple layers, as the data indicate.

Measuring absorbed energy in the human auditory system using finite element models: A comparison with experimental results.

BACKGROUND: There are different ways to analyze energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. OBJECTIVE: In this current work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. METHODS: Multiple acoustic, structure, and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1-10 kHz range. Once the FEM had been validated with published experimental data, its numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. RESULTS: A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. CONCLUSION: This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between middle ear structures and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

Tomography of Laser Powder Bed Fusion Maraging Steel.

The presence of defects in additive manufactured maraging steel is a widespread problem as its dependence on processing parameters significantly influences it. Using X-ray computed tomography, along with optical microscope data limited to 2D images, quantifies the internal porosity present on a compact tension sample typically employed in fatigue testing. The primary goal of this research is to analyse the pores obtained after the fabrication of a compact tension sample and their main definition parameters, such as sphericity, aspect ratio, surface, and volume, and obtain validation of which method is valid for each of the parameters analysed. The current study aims to enhance the understanding of defects in maraging steel samples through non-destructive 3D analysis. Conventional 2D analyses are limited to surface measurements, providing incomplete information. The proposed method will provide a comprehensive understanding of the defects inside the maraging steel sample, thereby improving the reliability of this material for further applications. This study will contribute to academic and industrial communities by providing a novel approach to analysing maraging steel samples and, ultimately, developing improved materials for various applications. The study's findings reveal that most pores are produced by gases that are trapped in the fabrication process, and keyhole pores only appear near the surface.

Influence of Porosity on Fatigue Behaviour of 18Ni300 Steel SLM CT Specimens at Various Angles.

In order to improve understanding of the fatigue behaviour in additive manufactured samples, this research delves into the challenging interplay between building parameters, particularly fabrication angles, and the presence of pores. The primary objective is to explore the characterisation of these pores and unravel their relationship with the fatigue properties of the material under investigation. Through a systematic analysis of porosity distribution in various fabrication orientations, supplemented by a detailed examination of the elemental dispersion around specific porous structures using energy-dispersive X-ray spectroscopy, a consistent behavioural pattern emerges across the samples. In assessing fatigue behaviour, an examination of the variables reveals that only area and aspect ratio significantly influence the behaviour of the samples. Such studies can contribute substantially to academic research in the field of material science and engineering.

A Literature Review of Incorporating Crack Tip Plasticity into Fatigue Crack Growth Models.

This paper presents an extensive literature review focusing on the utilisation of crack tip plasticity as a crucial parameter in determining and enhancing crack growth models. The review encompasses a comprehensive analysis of various methodologies, predominantly emphasising numerical simulations of crack growth models while also considering analytical approaches. Although experimental investigations are not the focus of this review, their relevance and interplay with numerical and analytical methods are acknowledged. The paper critically examines these methodologies, providing insights into their advantages and limitations. Ultimately, this review aims to offer a holistic understanding of the role of crack tip plasticity in the development of effective crack growth models, highlighting the synergies and gaps between theoretical, experimental, and simulation-based approaches.