RESUMO
This paper investigates the effect of the Dynamically Morphing Leading Edge (DMLE) on the flow structure and the behavior of dynamic stall vortices around a pitching UAS-S45 airfoil with the objective of controlling the dynamic stall. An unsteady parametrization framework was developed to model the time-varying motion of the leading edge. This scheme was then integrated within the Ansys-Fluent numerical solver by developing a User-Defined-Function (UDF), with the aim to dynamically deflect the airfoil boundaries, and to control the dynamic mesh used to morph and to further adapt it. The dynamic and sliding mesh techniques were used to simulate the unsteady flow around the sinusoidally pitching UAS-S45 airfoil. While the γ-Reθ turbulence model adequately captured the flow structures of dynamic airfoils associated with leading-edge vortex formations for a wide range of Reynolds numbers, two broader studies are here considered. Firstly, (i) an oscillating airfoil with the DMLE is investigated; the pitching-oscillation motion of an airfoil and its parameters are defined, such as the droop nose amplitude (AD) and the pitch angle at which the leading-edge morphing starts (MST). The effects of the AD and the MST on the aerodynamic performance was studied, and three different amplitude cases are considered. Secondly, (ii) the DMLE of an airfoil motion at stall angles of attack was investigated. In this case, the airfoil was set at stall angles of attack rather than oscillating it. This study will provide the transient lift and drag at different deflection frequencies of 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, and 10 Hz. The results showed that the lift coefficient for the airfoil increased by 20.15%, while a 16.58% delay in the dynamic stall angle was obtained for an oscillating airfoil with DMLE with AD = 0.01 and MST = 14.75°, as compared to the reference airfoil. Similarly, the lift coefficients for two other cases, where AD = 0.05 and AD = 0.0075, increased by 10.67% and 11.46%, respectively, compared to the reference airfoil. Furthermore, it was shown that the downward deflection of the leading edge increased the stall angle of attack and the nose-down pitching moment. Finally, it was concluded that the new radius of curvature of the DMLE airfoil minimized the streamwise adverse pressure gradient and prevented significant flow separation by delaying the Dynamic Stall Vortex (DSV) occurrence.
RESUMO
Lightweight bioinspired structures are extremely interesting in industrial applications for their known advantages, especially when Additive Manufacturing technologies are used. Lattices are composed of axial elements called ligaments: several unit cells are repeated in three directions to form bodies. However, their inherent structure complexity leads to several problems when lattices need to be designed or numerically simulated. The computational power needed to capture the overall component is extremely high. For this reason, some alternative methodologies called homogenization methods were developed in the literature. However, following these approaches, the designers do not have a local visual overview of the lattice behavior, especially at the ligament level. For this reason, an alternative mono-dimensional (1D) modeling approach, called lattice-to-1D is proposed in this work. This method approximates the ligament element with its beam axis, uses the real material characteristics, and gives the cross-sectional information directly to the solver. Several linear elastic simulations, involving both stretching and bending dominated unit cells, are performed to compare this approach with other alternatives in the literature. The results show a comparable agreement of the 1D simulations compared with homogenization methods for real tridimensional (3D) objects, with a dramatic decrease of computational power needed for a 3D analysis of the whole body.
RESUMO
This study aims to evaluates how an adaptive winglet during flight can improve aircraft aerodynamic characteristics of the CRJ700. The aircraft geometry was slightly modified to integrate a one-rotation axis adaptive winglet. Aerodynamic characteristics of the new adaptive design were computed using a validated high-fidelity aerodynamic model developed with the open-source code OpenFoam. The aerodynamic model successively uses the two solvers simpleFoam and rhoSimpleFoam based on Reynold Averaged Navier Stokes equations. Characteristics of the adaptive winglet design were studied for 16 flight conditions, representative of climb and cruise usually considered by the CRJ700. The adaptive winglet can increase the lift-to-drag ratio by up to 6.10% and reduce the drag coefficient by up to 2.65%. This study also compared the aerodynamic polar and pitching moment coefficients variations of the Bombardier CRJ700 equipped with an adaptive versus a fixed winglet.
