Bio-Mapping Salmonella and Campylobacter Loads in Three Commercial Broiler Processing Facilities in the United States to Identify Strategic Intervention Points.

The poultry industry in the United States is one of the largest in the world. Poultry consumption has significantly increase since the COVID-19 pandemic and is predicted to increase over 16% between 2021 and 2030. Two of the most significant causes of hospitalizations and death in the United States are highly related to poultry consumption. The FSIS regulates poultry processing, enforcing microbial performance standards based on Salmonella and Campylobacter prevalence in poultry processing establishments. This prevalence approach by itself is not a good indicator of food safety. More studies have shown that it is important to evaluate quantification along with prevalence, but there is not much information about poultry mapping using quantification and prevalence. In this study, enumeration and prevalence of Salmonella and Campylobacter were evaluated throughout the process at three different plants in the United States. Important locations were selected in this study to evaluate the effect of differences interventions. Even though there were high differences between the prevalences in the processes, some of the counts were not significantly different, and they were effective in maintaining pathogens at safe levels. Some of the results showed that the intervention and/or process were not well controlled, and they were not effective in controlling pathogens. This study shows that every plant environment is different, and every plant should be encouraged to implement a bio-mapping study. Quantification of pathogens leads to appropriate risk assessment, where physical and chemical interventions can be aimed at specific processing points with higher pathogen concentrations using different concentrations of overall process improvement.

Bio-Mapping of Microbial Indicators and Pathogen Quantitative Loads in Commercial Broiler Processing Facilities in South America.

A bio-mapping study was conducted with the aim of creating a microbiological baseline on indicator organisms and pathogens in commercial broiler processing facilities located in a country in South America. Whole chicken carcass and wing rinses were collected from five stages of the poultry processing line: live receiving (LR), rehanger (R), post-evisceration (PE), post-chilling (PC), and wings (W). Rinses (n = 150) were enumerated using the MicroSnap™ system for total viable counts (TVC) and Enterobacteriaceae (EB), while the BAX®-System-SalQuant® and BAX®-System-CampyQuant™ were used for Salmonella and Campylobacter, respectively. TVC and EB were significantly different between stages at the processing line (p < 0.01). There was a significant reduction from LR to PC for both microbial indicators. TVC and EB counts increased significantly from PC to W. Salmonella counts at PC were significantly different from the other stages at the processing line (p = 0.03). Campylobacter counts were significantly higher than the other stages at PC (p < 0.01). The development of bio-mapping baselines with microbial indicators showed consistent reduction up to the post-chilling stage, followed by an increase at the wings sampling location. The quantification of pathogens demonstrates that prevalence analysis as a sole measurement of food safety is not sufficient to evaluate the performance of processing operations and sanitary dressing procedures in commercial processing facilities.

Data-Mining Poultry Processing Bio-Mapping Counts of Pathogens and Indicator Organisms for Food Safety Management Decision Making.

Bio-mapping studies play an important role, as the data collected can be managed and analyzed in multiple ways to look at process trends, find explanations about the effect of process changes, activate a root cause analysis for events, and even compile performance data to demonstrate to inspection authorities or auditors the effect of certain decisions made on a daily basis and their effects over time in commercial settings not only from the food safety perspective but also from the production side. This study presents an alternative analysis of bio-mapping data collected throughout several months in a commercial poultry processing operation as described in the article "Bio-Mapping Indicators and Pathogen Loads in a Commercial Broiler Processing Facility Operating with High and Low Antimicrobial Interventions". The conducted analysis identifies the processing shift effect on microbial loads, attempts to find correlation between microbial indicators data and pathogens loads, and identifies novel visualization approaches and conducts distribution analysis for microbial indicators and pathogens in a commercial poultry processing facility. From the data analyzed, a greater number of locations were statistically different between shifts under reduced levels of chemical interventions with higher means at the second shift for both indicators and pathogens levels. Minimal to negligible correlation was found when comparing aerobic counts and Enterobacteriaceae counts with Salmonella levels, with significant variability between sampling locations. Distribution analysis and visualization as a bio-map of the process resulted in a clear bimodality in reduced chemical conditions for multiple locations mostly explained by shift effect. The development and use of bio-mapping data, including proper data visualization, improves the tools needed for ongoing decision making in food safety systems.

Bio-Mapping Indicators and Pathogen Loads in a Commercial Broiler Processing Facility Operating with High and Low Antimicrobial Intervention Levels.

The poultry industry in the United States has traditionally implemented non-chemical and chemical interventions against Salmonella spp. and Campylobacter spp. on the basis of experience and word-of-mouth information shared among poultry processors. The effects of individual interventions have been assessed with microbiological testing methods for Salmonella spp. and Campylobacter spp. prevalence as well as quantification of indicator organisms, such as aerobic plate counts (APC), to demonstrate efficacy. The current study evaluated the loads of both indicators and pathogens in a commercial chicken processing facility, comparing the "normal chemical", with all chemical interventions turned-on, at typical chemical concentrations set by the processing plant versus low-chemical process ("reduced chemical"), where all interventions were turned off or reduced to the minimum concentrations considered in the facility's HACCP system. Enumeration and prevalence of Salmonella spp. and Campylobacter spp. as well as indicator organisms (APC and Enterobacteriaceae-EB) enumeration were evaluated to compare both treatments throughout a 25-month sampling period. Ten locations were selected in the current bio-mapping study, including live receiving, rehanger, post eviscerator, post cropper, post neck breaker, post IOBW #1, post IOBW #2, prechilling, post chilling, and parts (wings). Statistical process control parameters for each location and processing schemes were developed for each pathogen and indicator evaluated. Despite demonstrating significant statistical differences between the normal and naked processes in Salmonella spp. counts ("normal" significantly lower counts than the "reduced" at each location except for post-eviscerator and post-cropper locations), the prevalence of Salmonella spp. after chilling is comparable on both treatments (~10%), whereas for Campylobacter spp. counts, only at the parts' location was there significant statistical difference between the "normal chemical" and the "reduced chemical". Therefore, not all chemical intervention locations show an overall impact on Salmonella spp. or Campylobacter spp., and certain interventions can be turned off to achieve the same or better microbial performance if strategic intervention locations are enhanced.

In-Plant Intervention Validation of a Novel Ozone Generation Technology (Bio-Safe) Compared to Lactic Acid in Variety Meats.

The objective of this experiment was to compare the antimicrobial efficacy of an aqueous ozone intervention and a lactic acid solution on natural microbiota of variety meats in a commercial beef processing plant. EZ-Reach™ swabs were used to collect 100 cm2 area samples before and after ozone and lactic acid intervention application for three different offals (head, heart, and liver). Each repetition included 54 samples per variety meat and antimicrobial for a total of 162 samples per repetition. Enumeration of total aerobic bacteria (APC) and Escherichia coli (EC) was performed on each sample. Microbial counts for both microorganisms evaluated were significantly reduced (p < 0.001) after lactic acid immersion (2-5%) and ozone intervention for all variety meats, with the exception of ozone intervention in EC counts of the heart samples. APC after lactic acid intervention was reduced on average by 1.73, 1.66, and 1.50 Log CFU/sample in the head, heart, and liver, respectively, while after ozone intervention, counts were reduced on average by 1.66, 0.52, and 1.20 Log CFU/sample. EC counts after lactic acid intervention were reduced on average by 0.96, 0.79, and 1.00 Log CFU/sample in the head, heart, and liver, respectively, while after ozone intervention, counts were reduced on average by 0.75, 0.62, and 1.25 Log CFU/sample. The aqueous ozone antimicrobial scheme proved to be a promising intervention for the in-plant reduction of indicator levels in variety meats, specifically heads, hearts, and livers.