ESTABLISHMENT OF THE IN VITRO DOSE-RESPONSE CALIBRATION CURVE FOR X-RAY-INDUCED MICRONUCLEI IN HUMAN LYMPHOCYTES.

The cytokinesis-block micronucleus assay has proven to be a reliable technique for biological dosimetry. This study aimed to establish the dose-response curve for X-ray-induced micronucleus. Peripheral blood samples from three healthy donors were irradiated with various doses and scoring criteria by the micronuclei (MN) in binucleated cells. The results showed that the frequency of MN increased with the elevation of radiation dose. CABAS and Dose Estimate software were used to fit the MN and dose into a linear quadratic model, and the results were compared. The linear and quadratic coefficients obtained by the two software were basically the same and were comparable with published curves of similar radiation quality and dose rates by other studies. The dose-response curve established in this study can be used as an alternative method for in vitro dose reconstruction and provides a reliable tool for biological dosimetry in accidental or occupational radiation exposures.

Quantitative Proteomics Analysis of Differentially Expressed Proteins in Serum of Former Uranium Miners by Isobaric Tags for the Relative and Absolute Quantitation.

The carcinogenicity of radon has been convincingly documented through epidemiological studies of underground miners. However, there is a lack of early warning indicators for radon radiation damage. In this study, mixed serum samples of 3 groups were collected from 27 underground uranium miners and seven aboveground miners according to the radiation exposure dose. The differentially expressed proteins in the serum were identified using the isobaric tags for the relative and absolute quantitation (iTRAQ)-based method. Some differentially expressed proteins were validated by enzyme-linked immunosorbent assay (ELISA) in 84 underground and 32 aboveground miners. A total of 25 co-differentially expressed proteins in 2 underground miner groups were screened, of which 9 were downregulated and 13 were upregulated. Biological process analysis of these proteins using Metascape showed that 5 GO terms were enriched, such as negative regulation of very-low-density lipoprotein particle clearance, endocytosis, and regulated exocytosis. The results of the ELISA for the expression levels of GCN1, CIP2A, and IGHV1-24 in the serum of 116 miners' serum showed that the levels of GCN1 and CIP2A were consistent with the iTRAQ results. In conclusion, APOC1, APOC2, APOC3, ORM1, ORM2, ANTXR1, GCN1, and CIP2A may be potential early markers of radon radiation damage.

MicroRNA profiling in BEAS-2B cells exposed to alpha radiation reveals potential biomarkers for malignant cellular transformation.

The carcinogenicity of radon has been convincingly documented through epidemiological studies of underground miners. The risk of lung cancer from radon exposure is due to the continuous radioactive decay of this gas and subsequent emission of high-energy alpha decay particles. And the bronchial epithelial cells are the main targets of radon exposure. However, there is a lack of early warning indicators of lung cancer caused by radon in the physical examination of populations involved in occupations with higher exposure to radon. To assess the potential of a molecular-based marker approach for the early detection of human lung cancer induced by radon, human bronchial epithelial cell injury models induced by alpha-particle irradiation were constructed. The results of transwell migration assay, transwell invasion assay, and the expression of the epithelial-mesenchymal transition-related proteins showed that malignant cell transformation could be triggered by alpha irradiation. Potential microRNAs (miRNAs) (hsa-miR-3907, hsa-miR-6732-3p, hsa-miR-4788, hsa-miR-5001-5p, and hsa-miR-4257) were screened using miRNA chips in cell models. The pathway analyses of miRNAs selected using DIANA-miRPath v3.0 showed that miRNAs involved in malignant cell transformation were associated with cell adhesion molecules, extracellular matrix receptor interaction, and proteoglycans in cancer, among others, which are closely related to the occurrence and development of carcinogenesis. Reverse Transcription Quantitative Real-Time PCR (RT-qPCR) assay showed that five screened miRNAs were up-regulated in five lung cancer tissue samples. In conclusion, the results indicated that hsa-miR-3907, hsa-miR-6732-3p, hsa-miR-4788, hsa-miR-5001-5p, and hsa-miR-4257 may be potential early markers of the malignant transformation of bronchial epithelial cells induced by alpha-particle irradiation.

Directly Modifying the Nonbonded Potential Based on the Standard Iterative Boltzmann Inversion Method for Coarse-Grained Force Fields.

Effective potentials are of great importance for coarse-grained (CG) simulations, which can be obtained by the structure-based iterative Boltzmann inversion (IBI) method. However, the standard IBI method is incapable of maintaining the mechanical and thermodynamic properties of the CG model in agreement with those of the all-atom model. Unlike the existing techniques, such as introducing friction force as the dissipative force to reduce the superatom motion while keeping the conservative force arising from the CG potential intact, we directly modified the standard IBI nonbonded potential by adding an empirical function. According to an analysis of the dissipative particle dynamics, the additional function did compensate for the friction reduction of the standard IBI CG model. In this work, the thermal fluctuation information from the nonbonded radial distribution function was incorporated into the additional empirical function. As an illustration of the new CG force fields, we presented simulations of the stress-strain relation and thermodynamic properties in terms of cis-polyisoprene and compared the statistical structure information of the superatoms with those of the IBI CG model and the all-atom model. It should be emphasized that the additional empirical function contributed to compensating for the friction reduction, irrespective of the functional form it took. In this sense, the proposed method was easily operable.

Molecular dynamics investigation of the adhesion mechanism acting between dopamine and the surface of dopamine-processed aramid fibers.

Dopamine, as a universal material for surface treatment, can effectively improve the surface performance of aramid fibers. However, directly processing the surface of aramid fibers using dopamine currently incurs a high cost. To seek dopamine substitutes, one must first explore the adhesion mechanism responsible for binding the dopamine to the surface of the fiber. In this study, we construct an all-atomic molecular dynamics model of an aramid fiber before and after surface modification using dopamine. A force field based on condensed-phase optimized molecular potentials for atomistic simulation studies (COMPASS) is used. Using it, we analyze the surface adhesion mechanism of polydopamines aggregated by 21 kinds of molecular structures typically found on the surface of aramid fibers. The results show that a clear and smooth interface is formed between the polydopamine nanofilm layer and the surface of the aramid fiber. The high atomic density of the polydopamine in the small interface region is found to be conducive to noncovalent bonds of polydopamines with the surface of the aramid fiber. In addition, we investigate the works of adhesion of the 21 molecular structures typically found on the surface of aramid fibers. The results suggest that the work of adhesion of 5,6-indolequinone is the highest, followed by annular eumelanin molecules with annular planar structure. Straight-chain shaped dimers proved to be the molecules with the highest adhesion ability of the dihydroxyindole chain oligomers. Therefore, there is reason to suppose that more molecular structures (as above) can be formed by processing the surface of aramid fibers using dopamine by controlling the processing conditions. These molecular structures help improve the adhesion ability of the dopamine on the surface of the aramid fiber. Additionally, if these polydopamine molecules with high adhesion ability can be synthesized on a large scale, then new surface-processing materials are possible.

Assessment of personal noise exposure of overhead-traveling crane drivers in steel-rolling mills.

BACKGROUND: Noise is widespread occupational hazard in iron and steel industry. Overhead-traveling cranes are widely used in this industry, but few studies characterized the overhead-traveling crane drivers' noise exposure level so far. In this study, we assessed and characterized personal noise exposure levels of overhead-traveling crane drivers in two steel-rolling mills. METHODS: One hundred and twenty-four overhead-traveling crane drivers, 76 in the cold steel-rolling mill and 48 in the hot steel-rolling mill, were enrolled in the study. Personal noise dosimeters (AIHUA Instruments Model AWA5610e, Hangzhou, China) were used to collect full-shift noise exposure data from all the participants. Crane drivers carried dosimeters with microphones placed near their collars during the work shifts. Work logs had been taken by the drivers simultaneously. Personal noise exposure data were divided into segments based on lines in which they worked. All statistical analyses were done using SPSS 13.0. RESULTS: The average personal noise exposure (L(Aeq.8h)) of overhead-traveling crane drivers in the hot steel-rolling mills ((85.03 +/- 2.25) dB (A)) was higher than that in the cold one ((83.05 +/- 2.93) dB (A), P < 0.001). There were 17 overhead traveling cranes in the hot steel-rolling mill and 24 cranes in the cold one, of which carrying capacities varied from 15 tons to 100 tons. The average noise exposure level based on different lines in the hot and cold steel-rolling mills were (85.2 +/- 2.61) dB (A) and (83.3 +/- 3.10) dB (A) respectively (P = 0.001), which were similar to the average personal noise exposure in both mills. The noise exposure levels were different among different lines (P = 0.021). CONCLUSION: Noise exposure levels, depending upon background noise levels and the noise levels on the ground, are inconstant. As the noise exposure levels are above the 85 dB (A) criteria, these drivers should be involved in the Hearing Conservation Program to protect their hearing.

[Measurement of personal noise exposure in a cold rolling mill].

OBJECTIVE: To measure and evaluate the personal noise exposure of cold rolling mill workers by using noise dosimeter. METHODS: According to job category and work type, all workers were divided into 11 groups. 3 to 5 day shift (8:00 to 16:00) workers from each group were selected as subjects for personal noise exposure measurement. SH-126 dosimeters were worn by each subject and collect noise data by a phone fix at collar. All subjects were asked to take notes about their working activities when they were wearing SH-126 dosimeters. Each worker's L(A)(eq) of 8 hours, geometric mean and range of each group were computed. RESULTS: There were many noise sources in the workshop. Recorded data showed that noise exposure of cold rolling mill was unstable. The varieties of personal noise levels were quite large. Among 53 workers, the highest noise exposure level was 100.0 dB (A), the lowest was 81.2 dB (A); the highest work type was of the foreside welders [94.20 dB (A)], and the lowest was of the straight-cutters [89.02 dB (A)]; quality checkers had the biggest rang [16.3 dB (A)], and primary rolling workers had the lest [2.3 dB (A)]. CONCLUSION: Noise exposure of all the 11 groups were more than 85 dB (A). Noise protection of these workers should be improved. It suggested that measuring personal noise exposure individually with dosimeters might obtain the noise exposure level more integrally in the complicated environment.