Novel synchronization technique for two parallel connected sparkgap switches.

In this article a novel way of synchronizing two parallel connected sparkgap switches with accuracies of 1-5 ns for high frequency pulsed power applications is described. The circuit design of a synchronized sparkgap switch circuit is discussed. The circuit uses a combination of one master sparkgap and a set of inductor and capacitors to synchronize two sparkgaps and can be controlled via an IGBT switch. Critical issues for circuit design are presented together with analytical calculations and simulations. Experimental verification of the novel topology is carried out in a prototype experimental setup. Results showing nanosecond level of accuracy in synchronization are reported in this paper along with simulations and analysis.

A novel approach for detection and classification of mammographic microcalcifications using wavelet analysis and extreme learning machine.

The objective of this paper is to reveal the effectiveness of wavelet based tissue texture analysis for microcalcification detection in digitized mammograms using Extreme Learning Machine (ELM). Microcalcifications are tiny deposits of calcium in the breast tissue which are potential indicators for early detection of breast cancer. The dense nature of the breast tissue and the poor contrast of the mammogram image prohibit the effectiveness in identifying microcalcifications. Hence, a new approach to discriminate the microcalcifications from the normal tissue is done using wavelet features and is compared with different feature vectors extracted using Gray Level Spatial Dependence Matrix (GLSDM) and Gabor filter based techniques. A total of 120 Region of Interests (ROIs) extracted from 55 mammogram images of mini-Mias database, including normal and microcalcification images are used in the current research. The network is trained with the above mentioned features and the results denote that ELM produces relatively better classification accuracy (94%) with a significant reduction in training time than the other artificial neural networks like Bayesnet classifier, Naivebayes classifier, and Support Vector Machine. ELM also avoids problems like local minima, improper learning rate, and over fitting.

Compact inductive energy storage pulse power system.

An inductive energy storage pulse power system is being developed in BARC, India. Simple, compact, and robust opening switches, capable of generating hundreds of kV, are key elements in the development of inductive energy storage pulsed power sources. It employs an inductive energy storage and opening switch power conditioning techniques with high energy density capacitors as the primary energy store. The energy stored in the capacitor bank is transferred to an air cored storage inductor in 5.5 µs through wire fuses. By optimizing the exploding wire parameters, a compact, robust, high voltage pulse power system, capable of generating reproducibly 240 kV, is developed. This paper presents the full details of the system along with the experimental data.

Analysis of temporal jitter in a copper vapor laser system.

Temporal jitter in a magnetic pulse compression based copper vapor laser (CVL) system is analyzed by considering ripple present in the input dc power supply and ripple present in the magnetic core resetting power supply. It is shown that the jitter is a function of the ratio of operating voltage to the designed voltage, percentage ripple, and the total propagation delay of the magnetic pulse compression circuit. Experimental results from a CVL system operating at a repetition rate of 9 kHz are presented.

High voltage pulse shaping of e-beam diode using perveance variation.

This paper presents a new high voltage pulse shaping methodology for pulsed power applications. The aim is to generate high voltage square pulse across anode cathode gap of e-beam diodes. The non-linear time varying perveance characteristics of e-beam diodes are used for shaping of output voltage pulse across it, generated directly from Marx generator. Analytically, it has been shown in the paper that under certain conditions, if achieved, Marx generator feeding an e-beam diode can produce a square-like pulse at the output, without any extra pulse shaping arrangements. Experimental results to support the analysis are also presented in the paper.

Design and development of repetitive capacitor charging power supply based on series-parallel resonant converter topology.

LCL resonant converter based repetitive capacitor charging power supply (CCPS) is designed and developed in the division. The LCL converter acts as a constant current source when switching frequency is equal to the resonant frequency. When both resonant inductors' values of LCL converter are same, it results in inherent zero current switching (ZCS) in switches. In this paper, ac analysis with fundamental frequency approximation of LCL resonant tank circuit, frequency dependent of current gain converter followed by design, development, simulation, and practical result is described. Effect of change in switching frequency and resonant frequency and change in resonant inductors ratio on CCPS will be discussed. An efficient CCPS of average output power of 1.2 kJ/s, output voltage 3 kV, and 300 Hz repetition rate is developed in the division. The performance of this CCPS has been evaluated in the laboratory by charging several values of load capacitance at various repetition rates. These results indicate that this design is very feasible for use in capacitor-charging applications.

Prepulse minimization in KALI-5000.

A pulse power system (1 MV, 50 kA, and 100 ns) based on Marx generator and Blumlein pulse forming line has been built for generating high power microwaves. The Blumlein configuration poses a prepulse problem and hence the diode gap had to be increased to match the diode impedance to the Blumlein impedance during the main pulse. A simple method to eliminate prepulse voltage using a vacuum sparkgap and a resistor is given. Another fundamental approach of increasing the inductance of Marx generator to minimize the prepulse voltage is also presented. Experimental results for both of these configurations are given.

High intensity electron cyclotron resonance proton source for low energy high intensity proton accelerator.

Electron cyclotron resonance (ECR) proton source at 50 keV, 50 mA has been designed, developed, and commissioned for the low energy high intensity proton accelerator (LEHIPA). Plasma characterization of this source has been performed. ECR plasma was generated with 400-1100 W of microwave power at 2.45 GHz, with hydrogen as working gas. Microwave was fed in the plasma chamber through quartz window. Plasma density and temperature was studied under various operating conditions, such as microwave power and gas pressure. Langmuir probe was used for plasma characterization using current voltage variation. The typical hydrogen plasma density and electron temperature measured were 7x10(11) cm(-3) and 6 eV, respectively. The total ion beam current of 42 mA was extracted, with three-electrode extraction geometry, at 40 keV of beam energy. The extracted ion current was studied as a function of microwave power and gas pressure. Depending on source pressure and discharge power, more than 30% total gas efficiency was achieved. The optimization of the source is under progress to meet the requirement of long time operation. The source will be used as an injector for continuous wave radio frequency quadrupole, a part of 20 MeV LEHIPA. The required rms normalized emittance of this source is less than 0.2 pi mm mrad. The simulated value of normalized emittance is well within this limit and will be measured shortly. This paper presents the study of plasma parameters, first beam results, and the status of ECR proton source.

Generation and dose distribution measurement of flash x-ray in KALI-5000 system.

Flash x-ray generation studies have been carried out in KALI-5000 Pulse power system. The intense relativistic electron beam has been bombarded on a tantalum target at anode to produce flash x-ray via bremsstrahlung conversion. The typical electron beam parameter was 360 kV, 18 kA, and 100 ns, with a few hundreds of A/cm(2) current density. The x-ray dose has been measured with calcium sulfate:dysposium (CaSO(4):Dy) thermoluminescent dosimeter and the axial dose distribution has been characterized. It has been observed that the on axis dose falls of with distance approximately 1/x(n), where n varies from 1.8 to 1.85. A maximum on axis dose of 46 mrad has been measured at 1 m distance from the source. A plastic scintillator with optical fiber coupled to a photomultiplier tube has been developed to measure the x-ray pulse width. The typical x-ray pulse width varied from 50 to 80 ns.

A design approach for systems based on magnetic pulse compression.

A design approach giving the optimum number of stages in a magnetic pulse compression circuit and gain per stage is given. The limitation on the maximum gain per stage is discussed. The total system volume minimization is done by considering the energy storage capacitor volume and magnetic core volume at each stage. At the end of this paper, the design of a magnetic pulse compression based linear induction accelerator of 200 kV, 5 kA, and 100 ns with a repetition rate of 100 Hz is discussed with its experimental results.

Characterization and analysis of a pulse power system based on Marx generator and Blumlein.

A pulse power system (1 MV, 50 kA, and 100 ns) based on Marx generator and Blumlein pulse forming line has been studied for characterization of a general system. Total erected Marx inductance and series resistance are calculated from modular testing of Marx generator and testing of Marx generator with Blumlein. The complete pulse power system has been tested with the termination of a liquid resistor load for finding the Blumlein characteristic impedance. Equivalent electrical circuits during the charging and discharging of the Blumlein are constructed from the characterized parameters of the system. These equivalent circuits can be used in the analysis of prepulse voltage and droop in the flat top of the main pulse in the pulse power systems based on Marx generator and Blumlein.

Expression and secretion of TGF-beta isoforms and expression of TGF-beta-receptors I, II and III in normal and neoplastic human breast.

We investigated gene expression of the TGF-beta signalling system (including peptides and receptors) in normal and malignant breast tissue. Additionally, gene and protein expression was determined in a series of primary epithelial and stromal cultures derived from these tissues. TGF-beta isoforms and their receptors were expressed by both tissue sets, however the percentage of samples expressing each transcript varied. In normal breast, both TGF-beta1 and TGF-beta3 were found in most samples (88 and 89% respectively), with fewer expressing TGF-beta2 (68%). A similar pattern was evident in the tumours. Type I receptor of TGF-beta was constitutively expressed in normal breast and observed in most tumours (90%). Type II and III receptors of TGF-beta were expressed less frequently, although the type II receptor was mainly expressed by tumours (P=0. 0075). All primary cultures produced TGF-beta1 and TGF-beta2. Comparing respective cell populations, tumour stromal cells produced significantly more TGF-beta1 than those derived from normal breast (P<0.0001). Linear regression analysis showed stromal cultures derived from breast tumours exhibited a strong positive correlation (r=0.976) in the production of TGF-beta1 and TGF-beta2. Thus, TGF-beta and TGF-beta-receptors are widely and differentially expressed by normal and malignant breast and secretion of this peptide by epithelial and stromal cultures, in particular those derived from tumours, confirms its potential as an autocrine/paracrine regulator in breast cancer.

Nitric oxide-releasing polymers containing the [N(O)NO]- group.

Ions of structure X[N(O)NO]- display broad-spectrum pharmacological activity that correlates with the rate and extent of their spontaneous, first-order decomposition to nitric oxide when dissolved. We report incorporation of this functional group into polymeric matrices that can be used for altering the time course of nitric oxide release and/or targeting it to tissues with which the polymers are in physical contact. Structural types prepared include those in which the [N(O)NO]- group is attached to heteroatoms in low molecular weight species that are noncovalently distributed throughout the polymeric matrix, in groupings pendant to the polymer backbone, and in the polymer backbone itself. They range in physical form from films that can be coated onto other surfaces to microspheres, gels, powders, and moldable resins. Chemiluminescence measurements confirm that polymers to which the [N(O)NO]- group is attached can serve as localized sources of nitric oxide, with one prototype providing sustained NO release for 5 weeks in pH 7.4 buffer at 37 degrees C. The latter composition, a cross-linked poly-(ethylenimine) that had been exposed to NO, inhibited the in vitro proliferation of rat aorta smooth muscle cells when added as a powder to the culture medium and showed potent antiplatelet activity when coated on a normally thrombogenic vascular graft situated in an arteriovenous shunt in a baboon's circulatory system. The results suggest that polymers containing the [N(O)NO]- functional group may hold considerable promise for a variety of biomedical applications in which local delivery of NO is desired.

Evaluation of three new hydrocolloid dressings: retention of dressing integrity and biodegradability of absorbent components attenuate inflammation.

Residues from hydrocolloid dressings (HCDs) that originate from matrix disintegration and nonbiodegradability of the absorbent components, may cause deep-seated, unresolved inflammation in tissue that appears otherwise healed. The purpose of this study was to evaluate three new HCDs that were formulated with the goal of attenuating the inflammatory responses that may arise from HCD therapy. Two of the HCDs (A-106 and A-107) consisted of conventional absorbents dispersed in a new maceration-resistant adhesive matrix. The same matrix, mixed with potentially biodegradable dextran microspheres, formed the third dressing (Dextran Bead Dressing [DBD]). In this pilot scale study these novel dressings were evaluated on full-thickness dermal wounds on swine. Restore (Hollister) and DuoDERM CGF (Convatec) dressings were used as controls. Wound healing was evaluated histomorphometrically. Pertinent histologic parameters were ranked from wound tissue that was harvested 18 days after wounding. Grossly visible dressing disintegration ranged from minimal (DBD) to severe (Restore). Disintegration of other dressings was moderate. The percentage of tissue sections exhibiting giant cells reflected, in parallel, the observed extent of dressing disintegration. Thirty-eight percent of wounds dressed with DBD contained giant cells; 74 and 100% of wounds treated with DuoDERM CGF and Restore, respectively, contained giant cells. DBD-dressed wounds had relatively fewer chronic inflammatory cells than other dressings. These wounds were also characterized by a well-organized collagen matrix and complete reepithelialization. The extent of wound closures was similar for all dressing types except Restore. Closure of Restore-dressed wounds was delayed compared with closure with DBD and DuoDERM CGF on all days of evaluation except one. A-106 and A-107 were comparable to DuoDERM CGF in retention of dressing integrity and the elicited inflammatory tissue response. The DBD dressing appears to possess equivalent properties of typical HCDs while causing minimal tissue reactions.