DFT-Assisted Spectroscopic Studies on the Coordination of Small Ligands to Palladium: From Isolated Ions to Nanoparticles.

A combination of experimental spectroscopies (UV-vis and Fourier-transform infrared) and computational modeling was used to investigate the coordination of small ligands (aminopropanol and propanediol) to Pd species during the metal nanoparticle formation process. Differences emerged between O- (propanediol) and N-containing (aminopropanol) ligands. In particular, a strong interaction between the NH amino group and Pd2+ ions could be inferred on the basis of spectroscopic evidences, which was corroborated by theoretical simulations, which confirmed the preferential coordination of aminopropanol through the NH group. This interaction seems to potentially cause the aminopropanol ligand to control the particle shape through a selective blocking of Pd(100) facets, which promote the growth on the Pd(111) facets.

Metal-Support Cooperative Effects in Au/VPO for the Aerobic Oxidation of Benzyl Alcohol to Benzyl Benzoate.

This paper studies the cooperative effect of Au nanoparticles deposited on vanadyl pyrophosphate oxide (VPO) in the liquid phase oxidation of benzyl alcohol. VPO was prepared using the classical method by thermally treating VOHPO4·0.5H2O precursor in reacting atmosphere at 420 °C for a period of 72 h. Au nanoparticles were deposited by incipient wetness method. The catalysts were characterized by means of XRD, TEM, XPS and Raman. The bulk VPO catalyst contains vanadyl pyrophosphate phase ((VO)2P2O7), and a small amount of VOPO4. The catalytic system exhibits a high activity in the base-free liquid phase oxidation of alcohols compared to Au on activated carbon, classic catalyst used for this type of reaction. Au/VPO showed a high peculiar selectivity to benzyl benzoate (76%), an important product used in the pharmaceutical and perfume industries. This behavior might be ascribed to the presence of strong acid sites of VPO, as determined by liquid phase titration. Stability tests performed on Au/VPO showed a deactivation of 10% after the first run, but a constant conversion along the following five cycles. This phenomenon can be attributed to the increase of mean Au particle size (from 19.1 to 23.4 nm) after recycling tests as well as the partial leaching of Au and V in the reaction media. Moreover, XRD evidenced a modification in the VPO structure with the partial formation of VOHPO4·0.5H2O phase.

Enhanced Activity of Au/NiO Nanohybrids for the Reductive Amination of Benzyl Alcohol.

Gold nanoparticles were prepared by sol immobilization (AuSI) or deposition precipitation (AuDP), then deposited on NiO and commercial TiO2 (P25). The Au/NiO catalysts showed higher activity and yield to the secondary amine, compared to Au/TiO2 catalysts, when tested for the reductive amination of benzyl alcohol with isopropylamine. We attribute this result to a synergistic effect between Au and NiO. Moreover, as a result of the protective effect of the polyvinyl alcohol used in the sol immobilization synthesis, the gold nanoparticles on NiO demonstrate an increased resistance to structural changes during the reaction. This effect results in enhanced catalytic efficiency in terms of activity, and better stability against deactivation.

Characterisation of gold catalysts.

Au-based catalysts have established a new important field of catalysis, revealing specific properties in terms of both high activity and selectivity for many reactions. However, the correlation between the morphology and the activity of the catalyst is not always clear although much effort has been addressed to this task. To some extent the problem relates to the complexity of the characterisation techniques that can be applied to Au catalyst and the broad range of ways in which they can be prepared. Indeed, in many reports only a few characterization techniques have been used to investigate the potential nature of the active sites. The aim of this review is to provide a critical description of the techniques that are most commonly used as well as the more advanced characterization techniques available for this task. The techniques that we discuss are (i) transmission electron microscopy methods, (ii) X-ray spectroscopy techniques, (iii) vibrational spectroscopy techniques and (iv) chemisorption methods. The description is coupled with developing an understanding of a number of preparation methods. In the final section the example of the supported AuPd alloy catalyst is discussed to show how the techniques can gain an understanding of an active oxidation catalyst.

Au-Based Catalysts: Electrochemical Characterization for Structural Insights.

Au-based catalysts are widely used in important processes because of their peculiar characteristics. The catalyst performance depends strongly on the nature and structure of the metal nanoparticles, especially in the case of bimetallic catalysts where synergistic effects between the two metals can be occasionally seen. In this paper, it is shown that electrochemical characterisation (cyclovoltammetry CV and electrochemical impedance spectroscopy EIS) of AuPd systems can be used to determine the presence of an electronic interaction between the two metals, thus providing a strong support in the determination of the nature of the synergy between Au and Pd in the liquid phase oxidation of alcohols. However, it seems likely that the strong difference in the catalytic behavior between the single metals and the bimetallic system is connected not only to the redox behaviour, but also to the energetic balance between the different elementary steps of the reaction.

N-Modified Carbon-Based Materials: Nanoscience for Catalysis.

Carbon-based materials constitute a large family of materials characterized by some peculiarities such as resistance to both acidic and basic environments, flexibility of structure, and surface chemical groups. Moreover, they can be deeply modified by simple organic reactions (acid-base or redox) to acquire different properties. In particular, the introduction of N-containing groups, achieved by post-treatments or during preparation of the material, enhances the basic properties. Moreover, it has been revealed that the position and chemical nature of the N-containing groups is important in determining the interaction with metal nanoparticles, and thus, their reactivity. The modified activity was addressed to a different metal dispersion. Moreover, experiments on catalysts, showing the same metal dispersion, demonstrated that the best results were obtained when N was embedded into the carbon structure and not very close to the metal active site.

Tailored N-Containing Carbons as Catalyst Supports in Alcohol Oxidation.

The introduction of N-containing functionalities in carbon-based materials is brought to stable and highly active metal-supported catalysts. However, up to now, the role of the amount and the nature of N-groups have not been completely clear. This study aims to clarify these aspects by preparing tailored N-containing carbons where different N-groups are introduced during the synthesis of the carbon material. These materials were used as the support for Pd nanoparticles. Testing these catalysts in alcohol oxidations and comparing the results with those obtained using Pd nanoparticles supported on different N-containing supports allowed us to obtain insight into the role of the different N-containing groups. In the cinnamyl alcohol oxidation, pyridine-like groups seem to favor both activity and selectivity toward cinnamaldehyde.

AuPt Alloy on TiO2: A Selective and Durable Catalyst for L-Sorbose Oxidation to 2-Keto-Gulonic Acid.

Pt nanoparticles were prepared by a sol immobilization route, deposited on supports with different acid/base properties (MgO, activated carbon, TiO2 , Al2O3, H-Mordenite), and tested in the selective oxidation of sorbose to 2-keto-gulonic acid (2-KGUA), an important precursor for vitamin C. In general, as the basicity of the support increased, a higher catalytic activity occurred. However, in most cases, a strong deactivation was observed. The best selectivity to 2-KGUA was observed with acidic supports (TiO2 and H-Mordenite) that were able to minimize the formation of C1/C2 products. We also demonstrated that, by alloying Pt to Au, it is possible to enhance significantly the selectivity of Pt-based catalysts. Moreover, the AuPt catalyst, unlike monometallic Pt, showed good stability in recycling because of the prevention of metal leaching during the reaction.

Acid-functionalized mesoporous carbon: an efficient support for ruthenium-catalyzed γ-valerolactone production.

The hydrogenation of levulinic acid has been studied using Ru supported on ordered mesoporous carbons (OMCs) prepared by soft-templating. P- and S-containing acid groups were introduced by postsynthetic functionalization before the addition of 1 % Ru by incipient wetness impregnation. These functionalities and the reaction conditions mediate the activity and selectivity of the levulinic acid hydrogenation. The presence of S-containing groups (Ru/OMC-S and Ru/OMC-P/S) deactivates the Ru catalysts strongly, whereas the presence of P-containing groups (Ru/OMC-P) enhances the activity compared to that of pristine Ru/OMC. Under mild conditions (70 °C and 7 bar H2 ) the catalyst shows high selectivity to γ-valerolactone (GVL; >95 %) and high stability on recycling. However, under more severe conditions (200 °C and p H 2=40 bar) Ru/OMC-P is particularly able to promote GVL ring-opening and the consecutive hydrogenation to pentanoic acid.

Glycerol oxidation using gold-containing catalysts.

Glycerol is an important byproduct of biodiesel production, and it is produced in significant amounts by transesterification of triglycerides with methanol. Due to the highly functionalized nature of glycerol, it is an important biochemical that can be utilized as a platform chemical for the production of high-added-value products. At present, research groups in academia and industry are exploring potential direct processes for the synthesis of useful potential chemicals using catalytic processes. Over the last 10 years, there has been huge development of potential catalytic processes using glycerol as the platform chemical. One of the most common processes investigated so far is the catalytic oxidation of glycerol at mild conditions for the formation of valuable oxygenated compounds used in the chemical and pharmaceutical industry. The major challenges associated with the selective oxidation of glycerol are (i) the control of selectivity to the desired products, (ii) high activity and resistance to poisoning, and (iii) minimizing the usage of alkaline conditions. To address these challenges, the most common catalysts used for the oxidation of glycerol are based on supported metal nanoparticles. The first significant breakthrough was the successful utilization of supported gold nanoparticles for improving the selectivity to specific products, and the second was the utilization of supported bimetallic nanoparticles based on gold, palladium, and platinum for improving activity and controlling the selectivity to the desired products. Moreover, the utilization of base-free reaction conditions for the catalytic oxidation of glycerol has unlocked new pathways for the production of free-base products, which facilitates potential industrial application. The advantages of using gold-based catalysts are the improvement of the catalyst lifetime, stability, and reusability, which are key factors for potential commercialization. In this Account, we discuss the advantages of the using supported gold-based nanoparticles, preparation methods for achieving highly active gold-based catalysts, and parameters such as particle size, morphology of the bimetallic particle, and metal-support interactions, which can influence activity and selectivity to the desired products.

AuRu/AC as an effective catalyst for hydrogenation reactions.

AuRu bimetallic catalysts have been prepared by sequential deposition of Au on Ru or vice versa obtaining different nanostructures: when Ru has been deposited on Au, a Au(core)-Ru(shell) has been observed, whereas the deposition of Au on Ru leads to a bimetallic phase with Ru enrichment on the surface. In the latter case, the unexpected Ru enrichment could be attributed to the weak adhesion of Ru on the carbon support, thus allowing Ru particles to diffuse on Au particles. Both structures result very active in catalysing the liquid phase hydrogenolysis of glycerol and levulinic acid but the activity, the selectivity and the stability depend on the structure of the bimetallic nanoparticles. Ru@Au/AC core-shell structure mostly behaved as the monometallic Ru, whereas the presence of bimetallic AuRu phase in Au@Ru/AC provides a great beneficial effect on both activity and stability.

Influence of periodic nitrogen functionality on the selective oxidation of alcohols.

An enhancement in catalytic alcohol oxidation activity is attributed to the presence of nitrogen heteroatoms on the external surface of a support material. The same Pd particles (3.1-3.2 nm) were supported on polymeric carbon-nitrogen supports and used as catalysts to selectively oxidize benzyl alcohol. The polymeric carbon-nitrogen materials include covalent triazine frameworks (CTF) and carbon nitride (C(3)N(4)) materials with nitrogen content varying from 9 to 58 atomic percent. With comparable metal exposure, estimated by X-ray photoelectron spectroscopy, the activity of these catalysts correlates with the concentration of nitrogen species on the surface. Because the catalysts showed comparable acidic/basic properties, this enhancement cannot be ascribed to the Lewis basicity but most probably to the nature of N-containing groups that govern the adsorption sites of the Pd nanoparticles.

Redox properties of manganese-containing zirconia solid solution catalysts analyzed by in situ UV-vis spectroscopy and crystal field theory.

The optical absorption spectra of manganese-promoted sulfated zirconia, a highly active alkane isomerization catalyst, were found to be characterized by oxygen-to-manganese charge-transfer transitions at 300-320 nm and d-d transitions of manganese ions at 580 and 680 nm. The latter were attributed to Mn(4+) and Mn(3+) ions, which are known to be incorporated in the zirconia lattice. The oxygen surroundings of these ions were modeled assuming a substitutional solid solution. The crystal field splittings, vibronic coupling constants, and oscillator strengths of the manganese ions were calculated on the basis of a cluster model that considers the manganese center as a complex with the adjacent ions of the lattice as ligands. The ratio of Mn(3+) to Mn(4+) ions was determined using the spectra and the model, and the relative concentrations of Mn(2+), Mn(3+), and Mn(4+) ions were determined with the help of the average valence known from X-ray absorption data in the literature. The redox behavior of manganese-promoted sulfated zirconia in oxidizing and inert atmosphere was elucidated at temperatures ranging from 323 to 773 K.

Triazine-based polymers as nanostructured supports for the liquid-phase oxidation of alcohols.

A covalent triazine framework (CTF) was used as support for palladium nanoparticles (NPs) and Pd/CTF was applied as the catalyst in the selective oxidation of benzyl alcohol. N groups in the CTF appeared more efficient than those created on carbon nanotubes (CNTs) by NH(3) /high-temperature treatment in stabilizing Pd NPs against growth during the immobilization step. This assured a high metal dispersion, which led to a highly active and stable catalyst in the alcohol oxidation reaction. Indeed, Pd on the CTF was more stable in recycling than Pd on activated carbon (AC) and on nitrogen-doped CNTs, particularly avoiding leaching of Pd NPs. Moreover, Pd on the CTF was less sensitive than Pd on AC to the decrease of reactant concentration. This in turn led to a higher selectivity to benzaldehyde (98 %) with a considerable activity (turnover frequency 1453 h(-1) ).

Covalent triazine framework as catalytic support for liquid phase reaction.

An important goal in the preparation of highly active supported metal particles is the enhancement of the metal support interaction, providing a more stable catalyst, especially for liquid phase reactions as the leaching and reconstruction of the active phase causes deactivation. In this work, a covalent triazine framework (CTF) as support for Pd nanoparticles is compared to activated carbon (AC), the typical support used in liquid phase reactions. The results indicate that the presence of the N-heterocyclic moieties on the surface of the frameworks is beneficial for improving the stability of Pd nanoparticles during the liquid phase glycerol oxidation. Pd/CTF showed better activity and in particular better stability when compared to Pd supported on activated carbon (AC).