Kinetics, equilibrium and thermodynamic investigations of methylene blue dye removal using Casuarina equisetifolia pines.

Casuarina equisetifolia pines are degradable biopolymeric substance with dye-sequestering property was utilized as biosorbent to expel a cationic dye; methylene blue dye from simulated wastewater. The prepared adsorbent material was characterized for their structural, morphological and elemental features to understand their suitability in augmenting in dye-wastewater remediation. The results infer that 0.5 g/L biosorbent was proficient in removing 100 mg/L methylene blue (pH 7.0 ± 0.2) when agitated at 150 rpm for 120 min. Isothermal behavior were evaluated using non-linear isotherm models like Temkin, Langmuir and Freundlich models while the rate-limiting steps were found using kinetic models. Temkin isotherm and pseudo-first order model explained the removal mechanism among the models evaluated, which infers that the biosorption followed physisorption with the maximum adsorption capacity of 41.35 mg/g. Thermodynamic behavior of methylene blue removal by C. equisetifolia pines powder described the feasibility of biosorption as well as the type of heat involved. Equilibrium sorption capacities, rate constants and correlation coefficients explains that MB dye removal by C. equisetifolia pines is presumably physisorption, spontaneous and endothermic in nature.

Evaluation of phase transfer kinetics and thermodynamic equilibria of Reactive Orange 16 sorption onto chemically improved Arachis hypogaea pod powder.

Biosorbent from pods of Arachis hypogaea (AhP) were inducted with sulphuric acid treatment and then the activated materials were employed to sequester a sulphonated textile dye; Reactive Orange 16 (RO16) from water system. The characteristic features of the surface functionalized AhP (Ct-AhP) were analysed using instrumentation techniques. The biosorption influencing variables like operating pH, agitating time, initial RO16 concentration and temperature effects were investigated. One-factor optimization revealed that 0.5 g Ct-AhP was sufficient to achieve maximum removal of RO16 (20-120 mg/L) within 180 min agitation at 150 rpm. The isotherm data were applied to non-linear isotherms viz., Freundlich, Langmuir and Temkin models as well as rate limiting steps were elucidated using kinetic models. Freundlich isotherm showed good fit and pseudo-second order kinetic data explained RO16 removal by Ct-AhP followed chemisorption. The outcome of thermodynamic parametric values infer that RO16 biosorption was spontaneous, feasible and involved exothermic type of heat. Elovich and intraparticle diffusion revealed the biosorption mechanisms. The maximum RO16 biosorption (56.48 mg/g) by 0.5 g Ct-AhP were witnessed in the system containing 120 mg/L RO16 agitated at 150 rpm operating at pH 7.0, 303 K for a span of 180 min. Thus, the Ct-AhP is considered to be a promising biosorbent which can be employed in treating the textile effluents.