High-performance hybrid supercapacitor-immobilized Wells-Dawson polyoxometalates on activated carbon electrodes.

The nanofabrication of electroactive hybrid materials for next-generation energy storage devices is becoming increasingly significant as supercapacitor (SC) technology develops rapidly. The present study utilizes activated carbon (AC) templates reinforced with Wells-Dawson polyoxotungstates (POMs) to produce nanohybrid electrodes for high-performance supercapacitors. This study analyzes Wells-Dawson polyoxotungstates (P2W18) for the first time integrated with AC, and its structural and electrochemical performances are discussed. First, the electrochemical performances of symmetric supercapacitors were characterized in an acidic aqueous electrolyte (0.5 M H2SO4). It was observed that a supercapacitor cell containing the 5 wt% AC-P2W18 hybrid symmetric displayed a noteworthy specific capacitance of 289 F g-1 and a remarkable energy density of 40 W h kg-1. Moreover, 5% AC-P2W18 symmetric supercapacitor cells showed 89% cyclic stability over 4000 cycles. Three LED lights were charged onto the electrode. The LEDs continued to illuminate continuously for red until 160 seconds, yellow until 20 seconds, and blue until 10 seconds after removing the electrode from the electrochemical workstation, demonstrating the device's power and energy density.

Waste dry cell derived photo-reduced graphene oxide and polyoxometalate composite for solid-state supercapacitor applications.

In the modern era, realizing highly efficient supercapacitors (SCs) derived through green routes is paramount to reducing environmental impact. This study demonstrates ways to recycle and reuse used waste dry cell anodes to synthesize nanohybrid electrodes for SCs. Instead of contributing to landfill and the emission of toxic gas to the environment, dry cells are collected and converted into a resource for improved SC cells. The high performance of the electrode was achieved by exploiting battery-type polyoxometalate (POM) clusters infused on a reduced graphene oxide (rGO) surface. Polyoxometalate (K5[α-SiMo2VW9O40]) assisted in the precise bottom-up reduction of graphene oxide (GO) under UV irradiation at room temperature to produce vanadosilicate embedded photo-reduced graphene oxide (prGO-Mo2VW9O40). Additionally, a chemical reduction route for GO (crGO) was trialed to relate to the prGO, followed by the integration of a faradaic monolayer (crGO-Mo2VW9O40). Both composite frameworks exhibit unique hierarchical heterostructures that offer synergic effects between the dual components. As a result, the hybrid material's ion transport kinetics and electrical conductivity enhance the critical electrochemical process at the electrode's interface. The simple co-participation method delivers a remarkable specific capacity (capacitance) of 405 mA h g-1 (1622 F g-1) and 117 mA h g-1 (470 F g-1) for prGO-Mo2VW9O40 and crGO-Mo2VW9O40 nanocomposites alongside high capacitance retentions of 94.5% and 82%, respectively, at a current density of 0.3 A g-1. Furthermore, the asymmetric electrochromic supercapacitor crGO//crGO-Mo2VW9O40 was designed, manifesting a broad operating potential (1.2 V). Finally, the asymmetric electrode material resulted in an enhanced specific capacity, energy, and power of 276.8 C g-1, 46.16 W h kg-1, and 1195 W kg-1, respectively, at a current density of 0.5 A g-1. The electrode materials were tested in the operating of a DC motor.

Assembly of a coordination polymer with sulphate-capped pentamolybdate units and copper: synthesis, structure, magnetic and catalytic studies.

A new coordination polymer based on the sulphate-capped pentamolybdate unit has been synthesized from the reaction of {Mo3S7Br6}2- with copper(II) bromide and pyridine, in DMF. The as-synthesized compound, formulated as [CuII(C5H5N)4]3[{MoVI5O15(SO4)2}{CuII(C5H5N)3(DMF)(H2O)}][MoVI5O15(SO4)2]·2DMF (1), crystallizes in the monoclinic space group of P21/c. This compound has a one-dimensional double-chain coordination polymeric structure, composed of the pentameric {MoVI5O15(SO4)2} and the {CuII(C5H5N)4} units, and has been characterized in the solid-state with single-crystal and powder X-ray diffraction, infrared and optical spectroscopy, as well as thermal and magnetic studies. Due to its unique arrangement, the compound is observed to be nanoporous in nature, occupied by a co-crystallized DMF molecule. Surface area measurements confirm the presence of nano-sized pores within the compound. Variable temperature P-XRD studies show the framework to be stable up to a temperature of at least 100 °C. Due to its rigid framework and the presence of nano-sized pores, the compound was extensively studied as a catalyst for oxidative desulphurization of model oil and commercial diesel. The compound not only shows excellent performance for the removal of recalcitrant sulphur components, such as dibenzothiophene (DBT) in fuel oil (∼100% removal), but is also observed to show excellent turn-over-numbers, regeneration, and reproducibility during the catalytic process.