Method for Multiplexed Integration of Synergistic Alleles and Metabolic Pathways in Yeasts via CRISPR-Cas9.

CRISPR-Cas has proven to be a powerful tool for precision genetic engineering in a variety of difficult genetic systems. In the highly tractable yeast S. cerevisiae, CRISPR-Cas can be used to conduct multiple engineering steps in parallel, allowing for engineering of complex metabolic pathways at multiple genomic loci in as little as 1 week. In addition, CRISPR-Cas can be used to consolidate multiple causal alleles into a single strain, bypassing the laborious traditional methods using marked constructs, or mating. These tools compress the engineering timeline sixfold or more, greatly increasing the productivity of the strain engineer.

Rapid Assembly of DNA via Ligase Cycling Reaction (LCR).

The assembly of multiple DNA parts into a larger DNA construct is a requirement in most synthetic biology laboratories. Here we describe a method for the efficient, high-throughput, assembly of DNA utilizing the ligase chain reaction (LCR). The LCR method utilizes non-overlapping DNA parts that are ligated together with the guidance of bridging oligos. Using this method, we have successfully assembled up to 20 DNA parts in a single reaction or DNA constructs up to 26 kb in size.

Efficient Assembly of DNA Using Yeast Homologous Recombination (YHR).

The assembly of multiple DNA parts into a larger DNA construct is a requirement in most synthetic biology laboratories. Here we describe a method for the efficient, high-throughput, assembly of DNA utilizing the yeast homologous recombination (YHR). The YHR method utilizes overlapping DNA parts that are assembled together by Saccharomyces cerevisiae via homologous recombination between designed overlapping regions. Using this method, we have successfully assembled up to 12 DNA parts in a single reaction.

CRISPR-Cas-Assisted Multiplexing (CAM): Simple Same-Day Multi-Locus Engineering in Yeast.

Demands on the industrial and academic yeast strain engineer have increased significantly in the era of synthetic biology. Installing complex biosynthetic pathways and combining point mutations are tedious and time-consuming using traditional methods. With multiplex engineering tools, these tasks can be completed in a single step, typically achieving up to sixfold compression in strain engineering timelines. To capitalize on this potential, a variety of yeast CRISPR-Cas methods have been developed, differing largely in how the guide RNA (gRNA) reagents that direct the Cas9 nuclease are delivered. However, in nearly all reported protocols, the time savings of multiplexing is offset by multiple days of cloning to prepare the required reagents. Here, we discuss the advantages and opportunities of CRISPR-Cas-assisted multiplexing (CAM), a same-day, cloning-free method for multi-locus engineering in yeast. J. Cell. Physiol. 231: 2563-2569, 2016. © 2016 Wiley Periodicals, Inc.

Low-Cost, High-Throughput Sequencing of DNA Assemblies Using a Highly Multiplexed Nextera Process.

In recent years, next-generation sequencing (NGS) technology has greatly reduced the cost of sequencing whole genomes, whereas the cost of sequence verification of plasmids via Sanger sequencing has remained high. Consequently, industrial-scale strain engineers either limit the number of designs or take short cuts in quality control. Here, we show that over 4000 plasmids can be completely sequenced in one Illumina MiSeq run for less than $3 each (15× coverage), which is a 20-fold reduction over using Sanger sequencing (2× coverage). We reduced the volume of the Nextera tagmentation reaction by 100-fold and developed an automated workflow to prepare thousands of samples for sequencing. We also developed software to track the samples and associated sequence data and to rapidly identify correctly assembled constructs having the fewest defects. As DNA synthesis and assembly become a centralized commodity, this NGS quality control (QC) process will be essential to groups operating high-throughput pipelines for DNA construction.

Efficient Multiplexed Integration of Synergistic Alleles and Metabolic Pathways in Yeasts via CRISPR-Cas.

CRISPR-Cas genome engineering in yeast has relied on preparation of complex expression plasmids for multiplexed gene knockouts and point mutations. Here we show that co-transformation of a single linearized plasmid with multiple PCR-generated guide RNA (gRNA) and donor DNA cassettes facilitates high-efficiency multiplexed integration of point mutations and large constructs. This technique allowed recovery of marker-less triple-engineering events with 64% efficiency without selection for expression of all gRNAs. The gRNA cassettes can be easily made by PCR and delivered in any combination. We employed this method to rapidly phenotype up to five specific allele combinations and identify synergistic effects. To prototype a pathway for the production of muconic acid, we integrated six DNA fragments totaling 24 kb across three loci in naive Saccharomyces cerevisiae in a single transformation. With minor modifications, we integrated a similar pathway in Kluyveromyces lactis. The flexibility afforded by combinatorial gRNA delivery dramatically accelerates complex strain engineering for basic research and industrial fermentation.

Rapid and reliable DNA assembly via ligase cycling reaction.

Assembly of DNA parts into DNA constructs is a foundational technology in the emerging field of synthetic biology. An efficient DNA assembly method is particularly important for high-throughput, automated DNA assembly in biofabrication facilities and therefore we investigated one-step, scarless DNA assembly via ligase cycling reaction (LCR). LCR assembly uses single-stranded bridging oligos complementary to the ends of neighboring DNA parts, a thermostable ligase to join DNA backbones, and multiple denaturation-annealing-ligation temperature cycles to assemble complex DNA constructs. The efficiency of LCR assembly was improved ca. 4-fold using designed optimization experiments and response surface methodology. Under these optimized conditions, LCR enabled one-step assembly of up to 20 DNA parts and up to 20 kb DNA constructs with very few single-nucleotide polymorphisms (<1 per 25 kb) and insertions/deletions (<1 per 50 kb). Experimental comparison of various sequence-independent DNA assembly methods showed that circular polymerase extension cloning (CPEC) and Gibson isothermal assembly did not enable assembly of more than four DNA parts with more than 50% of clones being correct. Yeast homologous recombination and LCR both enabled reliable assembly of up to 12 DNA parts with 60-100% of individual clones being correct, but LCR assembly provides a much faster and easier workflow than yeast homologous recombination. LCR combines reliable assembly of many DNA parts via a cheap, rapid, and convenient workflow and thereby outperforms existing DNA assembly methods. LCR assembly is expected to become the method of choice for both manual and automated high-throughput assembly of DNA parts into DNA constructs.

Synthetic biology tools for programming gene expression without nutritional perturbations in Saccharomyces cerevisiae.

A conditional gene expression system that is fast-acting, is tunable and achieves single-gene specificity was recently developed for yeast. A gene placed directly downstream of a modified GAL1 promoter containing six Zif268 binding sequences (with single nucleotide spacing) was shown to be selectively inducible in the presence of ß-estradiol, so long as cells express the artificial transcription factor, Z3EV (a fusion of the Zif268 DNA binding domain, the ligand binding domain of the human estrogen receptor and viral protein 16). We show the strength of Z3EV-responsive promoters can be modified using straightforward design principles. By moving Zif268 binding sites toward the transcription start site, expression output can be nearly doubled. Despite the reported requirement of estrogen receptor dimerization for hormone-dependent activation, a single binding site suffices for target gene activation. Target gene expression levels correlate with promoter binding site copy number and we engineer a set of inducible promoter chassis with different input-output characteristics. Finally, the coupling between inducer identity and gene activation is flexible: the ligand specificity of Z3EV can be re-programmed to respond to a non-hormone small molecule with only five amino acid substitutions in the human estrogen receptor domain, which may prove useful for industrial applications.

High-throughput, cost-effective verification of structural DNA assembly.

DNA 'assembly' from 'building blocks' remains a cornerstone in synthetic biology, whether it be for gene synthesis (∼ 1 kb), pathway engineering (∼ 10 kb) or synthetic genomes (>100 kb). Despite numerous advances in the techniques used for DNA assembly, verification of the assembly is still a necessity, which becomes cost-prohibitive and a logistical challenge with increasing scale. Here we describe for the first time a comprehensive, high-throughput solution for structural DNA assembly verification by restriction digest using exhaustive in silico enzyme screening, rolling circle amplification of plasmid DNA, capillary electrophoresis and automated digest pattern recognition. This low-cost and robust methodology has been successfully used to screen over 31 000 clones of DNA constructs at <$1 per sample.

A highly sensitive fluorogenic probe for cytochrome P450 activity in live cells.

A derivative of rhodamine 110 has been designed and assessed as a probe for cytochrome P450 activity. This probe is the first to utilize a 'trimethyl lock' that is triggered by cleavage of an ether bond. In vitro, fluorescence was manifested by the CYP1A1 isozyme with k(cat)/K(M)=8.8x10(3)M(-1)s(-1) and K(M)=0.09microM. In cellulo, the probe revealed the induction of cytochrome P450 activity by the carcinogen 2,3,7,8-tetrachlorodibenzo-p-dioxin, and its repression by the chemoprotectant resveratrol.

Activating hybrid modular interfaces in synthetic polyketide synthases by cassette replacement of ketosynthase domains.

Unnatural combinations of polyketide synthase modules often fail to make a polyketide product. The causes of these failures are likely complex and are not yet amenable to rational correction. One possible explanation is the inability of the ketosynthase (KS) domain to extend the ketide donated to it by the upstream module. We therefore addressed the problem by exchanging KS domains of the acceptor module in a combinatorial fashion and coexpressing these chimeric modules with ketide-donor modules that naturally interact with the transplanted KS. This approach was remarkably successful in activating previously unproductive bimodular combinations, and the results augur well for the ongoing development of molecular tools to design and produce novel polyketides.

Combinatorial polyketide biosynthesis by de novo design and rearrangement of modular polyketide synthase genes.

Type I polyketide synthase (PKS) genes consist of modules approximately 3-6 kb long, which encode the structures of 2-carbon units in polyketide products. Alteration or replacement of individual PKS modules can lead to the biosynthesis of 'unnatural' natural products but existing techniques for this are time consuming. Here we describe a generic approach to the design of synthetic PKS genes where facile cassette assembly and interchange of modules and domains are facilitated by a repeated set of flanking restriction sites. To test the feasibility of this approach, we synthesized 14 modules from eight PKS clusters and associated them in 154 bimodular combinations spanning over 1.5-million bp of novel PKS gene sequences. Nearly half the combinations successfully mediated the biosynthesis of a polyketide in Escherichia coli, and all individual modules participated in productive bimodular combinations. This work provides a truly combinatorial approach for the production of polyketides.

Latent fluorophore based on the trimethyl lock.

Fluorescent molecules are essential for basic research in the biological sciences and have numerous practical applications. Herein is described the synthesis and use of a new class of latent fluorophores based on a novel design element, the trimethyl lock, that confers distinct advantages over extant fluorophores and pro-fluorophores. A diacetyl version of the latent fluorophore is stable in a biological environment, but rapidly yields rhodamine 110 upon acetyl-group hydrolysis by pig liver esterase or endogenous esterases in the cytosol and lysosomes of human cells. This design element is general and, hence, provides access to an ensemble of useful latent fluorophores.

Phosphoenolpyruvate availability and the biosynthesis of shikimic acid.

The impact of increased availability of phosphoenolpyruvate during shikimic acid biosynthesis has been examined in Escherichia coli K-12 constructs carrying plasmid-localized aroF(FBR) and tktA inserts encoding, respectively, feedback-insensitive 3-deoxy-d-arabino-heptulosonic acid 7-phosphate synthase and transketolase. Strategies for increasing the availability of phosphoenolpyruvate were based on amplified expression of E. coli ppsA-encoded phosphoenolpyruvate synthase or heterologous expression of the Zymomonas mobilis glf-encoded glucose facilitator. The highest titers and yields of shikimic acid biosynthesized from glucose in 1 L fermentor runs were achieved using E. coli SP1.lpts/pSC6.090B, which expressed both Z. mobilis glf-encoded glucose facilitator protein and Z. mobilis glk-encoded glucose kinase in a host deficient in the phosphoenolpyruvate:carbohydrate phosphotransferase system. At 10 L scale with yeast extract supplementation, E. coli SP1.lpts/pSC6.090B synthesized 87 g/L of shikimic acid in 36% (mol/mol) yield with a maximum productivity of 5.2 g/L/h for shikimic acid synthesized during the exponential phase of growth.