RESUMO
Oxygen vacancies (Ov) in metal oxides play a crucial role in modifying the electronic and acidic properties of catalysts, thereby influencing their catalytic activity. This study explores the impact of Ov in MnOx catalysts on their acidic and catalytic properties for the Meerwein-Ponndorf-Verley reduction of levulinic acid (LA) and levulinate to γ-valerolactone (GVL). Various characterization techniques demonstrate that surface Ov significantly modulate the acidic properties of MnOx catalysts, positively correlating with Lewis/Brønsted acid ratio and GVL yield. In situ DRIFTS and DFT calculations further unveil the reaction mechanism, revealing that Ov facilitate the activation and dehydrogenation of isopropanol and subsequent hydrogen transfer and hydrogenation of LA, leading to enhanced GVL production. These insights underscore the pivotal role of Ov in MnOx catalysts for the efficient conversion of LA to GVL, highlighting their importance in improving catalytic performance.
Assuntos
Lactonas , Ácidos Levulínicos , Oxirredução , Óxidos , Oxigênio , Ácidos Levulínicos/química , Catálise , Lactonas/química , Oxigênio/química , Óxidos/química , Compostos de Manganês/químicaRESUMO
Resource recovery from solid organic wastes, such as degradable plastics, and upgrading raw bio-oil are important ways for reducing carbon and pollution emissions. Hydrodeoxygenation (HDO) is a common thermochemical treatment to upgrade crude bio-oil. In this study, in order to realize in situ HDO during the hydropyrolysis of heavy bio-oil and degradable plastics, a reduced Fe/Ce oxygen carrier (OC) was used to catalytically remove oxygen from organics under the methanol-zero valent aluminum (ZV Al) media, where the hydrogen was produced during pyrolysis instead of a direct hydrogen supply. The results showed that the reduced OC captured the oxygen from the pyrolysis products of heavy bio-oil and degradable plastic, representing the multi-selectivity of reduced OC to phenols, ketones, etc. The ZV Al system promoted the production and utilization of hydrogen, as evidenced by the increased hydrogen content in gas phase and hydrocarbon content in liquid phase. The hydrocarbon component distribution in the liquid phase increased clearly when hydropyrolysis with degradable plastics addtion, but the excess degradable plastics addition caused increasing of the liquid product viscosity, and decreasing of the liquid products yield for the higher ash content in degradable plastic, and a higher ZV Al amount was required to maintain the hydropyrolysis. Molecular dynamics simulations verified the synergistic effect of degradable plastics and bio-oil by the pyrolysis behavior in different systems and temperatures, and the pyrolysis pathways were proposed. This non-autocatalytic system realized the resource recovery and heavy bio-oil upgrading using an Fe/Ce OC.
Assuntos
Alumínio , Oxigênio , Óleos de Plantas , Metanol , Polifenóis , Hidrogênio , Biocombustíveis/análise , Temperatura Alta , Catálise , PlásticosRESUMO
In this paper, a certain amount of rare earth (europium) was doped into magnesium aluminum salt solution and assembled with graphene oxide (GO) by electrostatic interaction under alkaline conditions. Then, the EuMgAl-LDH/GO hybrid material was synthesized by a hydrothermal method. Its microstructure was analyzed and tested by X-ray diffraction (XRD), energy dispersive spectrometry (EDS), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR), the results indicated that the EuMgAl-LDH/GO hybrid material had been successfully prepared. Next, it was mixed with zinc borate and added to a thermoplastic polyurethane (TPU) (thermoplastic polyurethane) matrix by melting blending. The flame retardant and smoke suppression effect of the composite was tested by conical calorimetry. The results showed that, compared with simple TPU, the PHRR (peak heat release rate), THR (total heat release), PSPR (peak smoke production rate) and TSP (total smoke production) value of the composite material decreased by 65.6%, 16.2%, 61% and 37.1%, respectively. Finally, through analysis of the carbon residue after combustion of the TPU composite material, we found that the formed carbon layer is denser and the char yield is greatly improved.
RESUMO
Coal-fired industrial boiler has become a large source of atmospheric pollutants in China, urging to achieve low NOx emissions. This paper adjusts the coal char structure with high-temperature/microwave expanding modification to investigate the char-NO interaction. The results show that after high-temperature or microwave expansion, the pore structure of char is further expanded with more new pore structure of 2-12 nm. The proper expansion temperature/power/treatment-time increases the ablation collapse of char pores and the order of carbon structure. With microwave, COC and CO bands break, forming a large amount of aromatic CC unsaturated carbon atoms, incrseasing the surface active sites of char-NO interaction. The optimum modifications of char-NO reactivity are 800 °C-90 s and 960 W-90 s. The reduction rate of NO by microwave modified char decreases with increase of inlet NO (<1200 ppm), and increases with increase of inlet CO (<8000 ppm). Burnout time of microwave modified char is shortened, with more rapid release of NO and larger conversion rate of char-N to NO. With microwave field, the conversion rate of char-N to NO at 900 °C is more significant than that at 600 °C. The too large microwave power cannot further shorten the char burnout time and the release time of NO.
RESUMO
The isopropanol (IPA) wastewater was treated in an anaerobic fluidized bed microbial fuel cell (AFB-MFC) filled with macroporous adsorptive resin (MAR) particles as multifunctional biocarrier. MAR was used as a biological carriers and adsorbent. MAR was characterized by scanning electron microscope. The diffusion of isopropanol in MAR was studied by Materials Studio (MS) software, and diffusion coefficients were analyzed and calculated by molecular dynamics simulation. The simulation results were qualitatively consistent with the available experimental data. The diffusivity of IPA in MAR increased firstly, with the increasing IPA weight, and then decreased. The maximum diffusivity was resulted to be 0.3722 Å2/ps. In addition, the response surface methodology (RSM) and Box-Behnken design were used to study the effects of initial IPA concentration, flow rate and external resistance on performance of power output and pollutant degradation. The optimal experimental condition was observed as initial IPA concentration of 483.49 mg/L, a flow rate of 57.70 mL/min, and external resistance of 5225.78 Ω. After 21 h of operation under the optimized conditions, the maximum power density was 135.73 ± 0.17 mW/m2 and the COD removal was 68.21 ± 0.24%, which increased by 65.85% and 9.29%, respectively.
Assuntos
Águas Residuárias/química , 2-Propanol , Adsorção , Anaerobiose , Fontes de Energia Bioelétrica , Eletricidade , Eliminação de Resíduos LíquidosRESUMO
In this study, porous activated carbon balls supported by nanoscale zero-valent iron composites (Fe@PACB-700) were used for the first time for the removal of trace Cr(VI) from aqueous solutions. The Fe@PACB-700 composites were prepared by a facile carbothermal reduction method and then characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS). The results show that nZVI particles have been successfully loaded onto PACBs. Fe@PACB-700 shows an excellent Cr(VI) removal efficiency of 91.2%. The maximum adsorption capacity of Fe@PACB-700 for Cr(VI) is 22.24 mg/g, which is 4.36 times that of PACB. The residual Cr(VI) concentration is below 20 ppb with the use of 0.15 g of Fe@PACB-700, which is much lower than the allowable concentration for Cr(VI) in drinking water (0.05 mg/L). The adsorption of Cr(VI) can be well described by the Langmuir isotherm model and pseudo-second-order kinetic model. Fe@PACB-700 still has a high removal efficiency of 80% after five cycles. Thus, Fe@PACB-700 has a great potential for Cr(VI) removal from aqueous solution. Graphical abstract.
Assuntos
Carvão Vegetal , Cromo/química , Poluentes Químicos da Água , Adsorção , Cromo/análise , Ferro/química , PorosidadeRESUMO
In the present study, the characteristics of phenol preparation from palm kernel shell (PKS) pyrolysis at the temperature range of 265-320⯰C were investigated using TG-FTIR-MS analyses, based on the analysis about the decomposition characteristics of PKS comparing to other biomass samples. The GC-MS analysis was subsequently employed to qualitatively and quantitatively characterize the phenol in bio-oils from PKS catalytic pyrolysis at 265-320⯰C. Two significant weight loss peaks with the closer values were observed in DTG curve of PKS that differentiated with other samples, which was mainly attributed to the content and especially the structural characteristics of lignin in the PKS. Phenol was mainly in bio-oils from decomposition of the "first weight loss peak" during PKS pyrolysis at 265-320⯰C. The relative content in bio-oil, selectivity in phenolic compounds, and mass yield of phenol from PKS catalytic pyrolysis with CaO could reach to 83.21 area%, 100%, and 0.0075â¯g/(g biomass), respectively.