Cone beam computed tomographic analysis of the spatial limitation during mandibular arch distalization.

BACKGROUND: In the literature, attempts are seldom made to quantify spatial limitation during mandibular arch distalization. This study aimed to investigate the spatial limitations associated with cortical contact with the mandibular second molar during mandibular arch distalization. METHODS: The study population included 67 individuals who had undergone cone beam computed tomography (CBCT) (34 male and 33 female; mean age: 23.9 ± 2.72 years). The total ridge width, alveolar housing width, and root width were measured to evaluate the buccolingual limit. The space distal to the molar root represented the mesiodistal limit. The influence of sex, right versus left side, root-contact condition, malocclusion category, and presence of wisdom teeth were evaluated. RESULTS: The rate of cortical contact was 49.3% before any orthodontic movement. No significant differences were observed in the alveolar width according to sex (male vs female), side assessed (right vs left), wisdom teeth (present vs absent), or malocclusion category. The ridge width and the alveolar width were smaller in the contact group than in the non-contact group (P < 0.01). The group with wisdom teeth showed a larger available distalization distance, but a significant difference was observed only near the alveolar crest. CONCLUSIONS: Both ridge width and available distalization distance were limiting factors for mandibular teeth distalization. For cases in which whole-arch distalization is planned, CBCT is recommended before treatment, especially for non-extraction treatment. This approach ensures safe and predictable tooth movement.

Autologous platelet concentrates in maxillofacial regenerative therapy.

Platelet concentrates have emerged as innovative autologous blood products that enhance tissue healing and regeneration in regenerative therapy. A common feature of these products is their higher than baseline platelet concentration, which improves wound healing and tissue repair. Four main categories of products can be easily defined, based on their leukocyte content and fibrin architecture: pure platelet-rich plasma, such as Cell Separator PRP or Anitua' PRGF; leukocyte- and platelet-rich plasma (L-PRP), such as PCCS or Ace PRP; pure platelet-rich fibrin (P-PRF), such as Fibrinet PRFM; and leukocyte- and platelet-rich fibrin (L-PRF), such as Choukroun's PRF. Two families contain significant concentrations of leukocytes: L-PRP and L-PRF. These four families of products have different biological signatures and mechanisms and obviously different clinical applications. An L-PRF membrane releases growth factors and matrix proteins over a period longer than 7 days, whereas a PRP gel matrix releases and disperses its growth factors in a relatively quick download. In the near future, simple and inexpensive products such as L-PRF are expected to have applications in oral-maxillofacial surgery, periodontal surgery, plastic surgery, orthopedic surgery, and sports medicine. Leukocytes substantially affect the intrinsic biology and properties of platelet concentrates, not only because they enhance immune function and antibacterial potential, but also because they have essential roles in the wound healing process. Unfortunately, their impact has been almost completely neglected in the literature. Improved understanding of the effects of leukocytes in wound healing is essential for development of new clinical applications of platelet concentrates.

Obstructive sleep apnea treatment in adults.

Sleep-related breathing disorders are complex problems that decrease quality of life and increase morbidity and mortality in patients. Comprehensive evaluation is essential for selecting and planning obstructive sleep apnea (OSA) treatments. However, the many proposed OSA treatments are rarely compared in the literature. The literature on OSA consists largely of case series studies, and the paucity of controlled studies makes comparisons of OSA treatments difficult. This article provides a brief overview of the most common OSA interventions. Because of the controversies and unanswered questions about OSA treatments, further studies are needed to define what treatments are best for specific OSA patients.

Anatomical variations in the digastric muscle.

The aim of this study was to investigate anatomical variations in the digastric muscle. Anatomical dissections of the head and neck region were performed in 15 cadavers at the Anatomy Department during a gross anatomy course. Three cadaver heads revealed anatomical variations in the anterior belly of the digastric muscle. The positional relationships among the accessory muscle bundles, the anterior belly of the digastric muscle, and the mylohyoid muscle were examined. Innervating branches from the mylohyoid nerve were also investigated. The remaining 12 cadaver heads without accessory muscle bundles were used for comparison. Of the three heads with accessory muscle bundles, one head (male) had two muscle bundles of the unilateral type, one head (male) had symmetrical muscle bundles of the crossover type, and one head (female) had a mix of unilateral and crossover types. The likely explanation for these and various other anomalies reported in the literature is the complex morphogenesis of the first branchial arch. Therefore, clinicians should be aware of these anatomical variations of the submental region when performing surgical procedures involving the head and neck and when using computed tomography and magnetic resonance imaging for interpretation or differential diagnosis of neck masses.

Effects of cortical bone thickness and trabecular bone density on primary stability of orthodontic mini-implants.

BACKGROUND/PURPOSE: Mini-implant screws are now routinely used as anchorage devices in orthodontic treatments. This study used synthetic bone models to investigate how the primary stability of an orthodontic mini-implant (OMI) as measured by resonance frequency (RF) is affected by varying cortical bone thickness and trabecular bone density. MATERIALS AND METHODS: Three synthetic cortical shells (thicknesses of 1, 2, and 3 mm) and three polyurethane foam blocks (densities of 40, 20, and 10 pound/cubic foot) were used to represent jawbones of varying cortical bone thicknesses and varying trabecular bone densities. Twenty-five stainless steel OMIs (2 × 10 mm) were sequentially inserted into artificial bone blocks to depths of 2, 4, and 6 mm. Five experimental groups of bone blocks with OMIs were examined by Implomates® RF analyzer. Statistical and correlation analyses were performed by Kruskal-Wallis test, Wilcoxon rank-sum test, and simple linear regression. RESULTS: As trabecular bone density decreased, RF decreased; as cortical bone thickness decreased, RF also decreased. Simple linear regression analysis showed highly linear correlations between trabecular bone density and RF (R 2 > 0.99; P < 0.0001) and between cortical bone thickness and RF (R 2 > 0.98; P < 0.0001). CONCLUSION: The stability of an OMI at the time of placement is influenced by both cortical bone thickness and trabecular bone density. Both cortical bone thickness and trabecular bone density have strong linear correlations with RF.

A novel ß-titanium alloy orthodontic wire.

This literature review investigated a recently developed orthodontic wire composed of a ß-titanium alloy known as "Gum Metal" and compared its properties with those of conventional wires. The attractive properties of Gum Metal include an ultra-low Young's modulus, non-linear elastic behavior, ultra-high strength, high yield strain, high ductility, and superplastic deformability without work hardening at room temperature. The unique multifunctional characteristics of this new orthodontic wire make it almost ideal for orthodontic applications. The results of this literature review indicate the strong potential use of Gum Metal wire for improving and enhancing the effectiveness of orthodontic treatment.

Resonance frequency analysis of miniscrew implant stability.

This study used resonance frequency (RF) analysis to assess miniscrew implant (MSI) stability during wound healing in a sample of 68 patients (41 women, 27 men; mean age, 27.7 years). The 104 MSIs included 66 placements in the buccal shelf (BS; 2.0 × 12 mm) and 38 placements in interradicular (IR; 1.5 × 8 mm) sites. Thirteen (12.5%) of the MSIs failed. A new RF detection device was used to measure RF at baseline (T0) and at 3 (T1), 6 (T2), 9 (T3), 12 (T4), and 15 (T5) weeks after placement. A linear mixed-effects model was fitted to change in RF values. As compared with the BS group, the IR group had significantly lower RF values on the right side from T0 through T4 and on the left side from T0 through T2. Insertion site and time of visit were significantly associated with RF value. The effects of time of visit significantly differed between the BS and IR sites. Starting from T0, the MSIs placed at both sites had significantly lower RF values at all intervals, except for T0-T1. Future studies should examine how the present clinical protocols can optimize timing of MSI loading to maximize the success rate.

Craniofacial features of cleidocranial dysplasia.

Cleidocranial dysplasia (CCD) is an autosomal-dominant malformation syndrome affecting bones and teeth. The most common skeletal and dental abnormalities in affected individuals are hypoplastic/aplastic clavicles, open fontanelles, short stature, retention of primary teeth, delayed eruption of permanent teeth, supernumerary teeth, and multiple impacted teeth. Treatment of CCD requires a multidisciplinary approach that may include dental corrections, orthognathic surgery and cranioplasty along with management of any complications of CCD. Early diagnosis of this condition enables application of the treatment strategy that provides the best quality of life to such patients. Notably, Runx2 gene mutations have been identified in CCD patients. Therefore, further elucidation of the molecular mechanism of supernumerary teeth formation related to Runx2 mutations may improve understanding of dental development in CCD. The insights into CCD pathogenesis may assist in the development of new treatments for CCD.

A prospective study of factors associated with orthodontic mini-implant survival.

The orthodontic mini-implant (MI) is a widely used anchorage device in orthodontic treatment. This prospective study analyzed MI survival and factors associated with MI survival in 139 patients (114 females and 25 males; average age, 25.7 years; age range, 12-56 years) who had received orthodontic treatment with MIs. Survival analysis and Kaplan-Meier curves were used to identify clinical variables associated with MI survival. For the 254 MIs investigated, the overall success rate was 85.8%, and the 1-year cumulative survival rate was 81.6%. MI survival was significantly associated with patient age and MI size. Notably, MI survival was significantly longer in patients aged 20-30 years than in older patients. The Cox proportional-hazards model revealed a 5% increase in failure risk for every 1-year increase in age among participants older than 30 years. Additionally, MI failure risk was inversely associated with MI length. MIs are generally reliable anchorage devices for orthodontic treatment but should be used with caution in older patients, due to the higher rate of failure in that population. Another important factor in MI survival is implant size. Future studies should attempt to clarify associations between MI survival and clinical variables.(J Oral Sci 58, 515-521, 2016).

Palatal bone thickness and associated factors in adult miniscrew placements: A cone-beam computed tomography study.

Palatal bone thickness measurements obtained by cone-beam computed tomography (CBCT) in 30 men and 28 women were evaluated for associated factors. Palatal bone thickness was measured at 20 locations unilateral to the midpalatal suture and posterior to the incisive foramen. Tongue position, presence of posterior crossbite, and palatal morphology were recorded. Lateral cephalograms acquired from CBCT data were used to calculate Frankfort-mandibular plane angles (FMA). At almost all sites, bone thickness was greater in males than in females, but the difference was statistically significant at only seven sites. Bone thickness showed no associations with tongue position, palatal morphology, or presence of posterior crossbite. In women, FMA significantly correlated with bone thickness at 12 locations. In conclusion, palatal bone thickness is unassociated with tongue position, posterior crossbite, or palatal morphology. In hyperdivergent women, however, available bone may be smaller than normal in the middle and posterior palatal areas; in such cases, a shorter than normal miniscrew may be needed to avoid penetrating the nasal cavity.

Miniscrew implant applications in contemporary orthodontics.

The need for orthodontic treatment modalities that provide maximal anchorage control but with minimal patient compliance requirements has led to the development of implant-assisted orthodontics and dentofacial orthopedics. Skeletal anchorage with miniscrew implants has no patient compliance requirements and has been widely incorporated in orthodontic practice. Miniscrew implants are now routinely used as anchorage devices in orthodontic treatment. This review summarizes recent data regarding the interpretation of bone data (i.e., bone quantity and quality) obtained by preoperative diagnostic computed tomography (CT) or by cone-beam computed tomography (CBCT) prior to miniscrew implant placement. Such data are essential when selecting appropriate sites for miniscrew implant placement. Bone characteristics that are indications and contraindications for treatment with miniscrew implants are discussed. Additionally, bicortical orthodontic skeletal anchorage, risks associated with miniscrew implant failure, and miniscrew implants for nonsurgical correction of occlusal cant or vertical excess are reviewed. Finally, implant stability is compared between titanium alloy and stainless steel miniscrew implants.

Morphometric analysis of the cranial base in Asians.

This study tested the hypothesis that developmental heterogeneity in cranial base morphology increases the prevalence of Class III malocclusion and mandibular prognathism in Asians. Thin-plate spline (TPS) graphical analysis of lateral cephalometric radiographs of the cranial base and the upper midface configuration were compared between a European-American group (24 females and 31 males) and four Asian ethnic groups (100 Chinese, 100 Japanese, 100 Korean and 100 Taiwanese; 50 females and 50 males per group) of young adults with clinically acceptable occlusion and facial profiles. Procrustes analysis was performed to identify statistically significant differences in each configuration of landmarks (P < 0.001). The TPS graphical analysis revealed that the greatest differences of Asians were the horizontal compression and vertical expansion in the anterior portion of the cranial base and upper midface region. The most posterior cranial base region also showed horizontal compression between the basion and Bolton point, with forward displacement of the articulare. Facial flatness and anterior displacement of the temporomandibular joint, resulting from a relative retrusion of the nasomaxillary complex and a relative forward position of the mandible were also noted. These features that tend to cause a prognathic mandible and/or retruded midface indicate a morphologic predisposition of Asian populations for Class III malocclusion.

Orthodontic treatment for a mandibular prognathic girl of short stature under growth hormone therapy.

This report presents a case of a 12-year-old girl with maxillary deficiency, mandibular prognathism, and facial asymmetry, undergoing growth hormone (GH) therapy due to idiopathic short stature. Children of short stature with or without GH deficiency have a deviating craniofacial morphology with overall smaller dimensions; facial retrognathism, especially mandibular retrognathism; and increased facial convexity. However, a complete opposite craniofacial pattern was presented in our case of a skeletal Class III girl with idiopathic short stature. The orthodontic treatment goal was to inhibit or change the direction of mandibular growth and stimulate the maxillary growth of the girl during a course of GH therapy. Maxillary protraction and mandibular retraction were achieved using occipitomental anchorage (OMA) orthopedic appliance in the first stage of treatment. In the second stage, the patient was treated with a fixed orthodontic appliance using a modified multiple-loop edgewise archwire technique of asymmetric mechanics and an active retainer of vertical chin-cup. The treatment led to an acceptable facial profile and obvious facial asymmetry improvement. Class I dental occlusion and coincident dental midline were also achieved. A 3½-year follow-up of the girl at age 18 showed a stable result of the orthodontic and dentofacial orthopedic treatment. Our case shows that the OMA orthopedic appliance of maxillary protraction combined with mandibular retraction is effective for correcting skeletal Class III malocclusion with midface deficiency and mandibular prognathism in growing children with idiopathic short stature undergoing GH therapy.

Influence of different implant materials on the primary stability of orthodontic mini-implants.

This study evaluates the influence of different implant materials on the primary stability of orthodontic mini-implants by measuring the resonance frequency. Twenty-five orthodontic mini-implants with a diameter of 2 mm were used. The first group contained stainless steel mini-implants with two different lengths (10 and 12 mm). The second group included titanium alloy mini-implants with two different lengths (10 and 12 mm) and stainless steel mini-implants 10 mm in length. The mini-implants were inserted into artificial bones with a 2-mm-thick cortical layer and 40 or 20 lb/ft(3) trabecular bone density at insertion depths of 2, 4, and 6 mm. The resonance frequency of the mini-implants in the artificial bone was detected with the Implomates(®) device. Data were analyzed by two-way analysis of variance followed by the Tukey honestly significant difference test (α = 0.05). Greater insertion depth resulted in higher resonance frequency, whereas longer mini-implants showed lower resonance frequency values. However, resonance frequency was not influenced by the implant materials titanium alloy or stainless steel. Therefore, the primary stability of a mini-implant is influenced by insertion depth and not by implant material. Insertion depth is extremely important for primary implant stability and is critical for treatment success.

Maximizing mandibular denture retention in the sublingual space.

PURPOSE: This study was designed to investigate potential discrepancies between the depth and width of the mandibular denture anterior lingual flange and the alveolingual sulcus and to measure the changes in retention when flange lengths were modified to optimal dimensions in a sample population of elderly edentulous subjects. MATERIALS AND METHODS: The anterior lingual flange and alveolingual sulcus were measured in 66 randomly selected elderly Taiwanese denture patients. The length and width of corresponding regions of the anterior lingual flange and alveolingual sulcus were compared. Mandibular denture retention was recorded and compared prior to and following modification of the anterior lingual flange with border molding. RESULTS: A significant statistical difference existed between the mean anatomical dimensions of the alveolingual sulcus and the corresponding denture flanges. Following functional border molding, the mean retention of the mandibular denture increased in a statistically significant manner. CONCLUSION: The discrepancies between the anterior lingual denture flange and alveolingual sulcus dimensions appeared to significantly diminish mandibular denture retention and reinforce the value of proper flange extensions in the sublingual region.

Craniofacial skeletal dysplasia of opposite-sex dizygotic twins.

Craniofacial skeletal dysplasia can lead to different skeletal malocclusions. Both environmental factors and heredity contribute to the formation of malocclusions. There are strong familial tendencies in the development of Angle's Class II and III malocclusions. Cases such as opposite-typed (Class II and III) malocclusions with skeletal and dentoalveolar discordance in siblings or dizygotic (DZ) twins have seldom been reported. We describe the rare case of a pair of opposite-sex DZ twins with completely different skeletal malocclusions, and discuss the clinical considerations for treatment. The patients were twins aged 13 years and 4 months. The girl had mandibular prognathism and a Class III dentoskeletal relationship, whereas the boy had skeletal Class II with mandibular retrusion. Several morphological traits have been implicated with hormonal effect. However, there was no evidence of whether the masculinization effect had any impact on jaw size in the female fetus or whether this effect lasted into adolescence. We suggest that, although DZ twins share the same growth environment, genetic or other unknown extrinsic factors can result in discordance of characteristics of the craniofacial skeleton, dentition, and occlusion.