Biological and physico-chemical characterization of human norovirus-like particles under various environmental conditions.

Human noroviruses (HuNoVs) are the predominant etiological agent of viral gastroenteritis in all age groups worldwide. Mutations over the years have affected noroviruses' responses to environmental conditions due to the arrangement of amino acid residues exposed on the VP1 capsid surface of each strain. The GII.4 HuNoV genotype has been the predominant variant for decades, while the GII.17 genotype has often been detected in East Asia since 2014. Here, GII.17 and GII.4 baculovirus-expressed VLPs (virus-like particles) were used to study the biological (binding to HuNoV ligand, namely the ABO and Lewis antigens) and physicochemical properties (size, morphology, and charge) of the HuNoV capsid under different conditions (temperature, pH, and ionic strength). GII.17 showed stability at low and high ionic strength, while GII.4 aggregated at an ionic strength of 10 mM. The nature of the buffers influences the morphology and stability of the VLPs. Here, both VLPs were highly stable from pH 7-8.5 at 25 °C. VLPs retained HBGA binding capability for the pH, ionic strength and temperature encountered in the stomach (fed state) and the small intestine. Increasing the temperature to above 65 °C altered the morphology of VLPs, causing aggregation, and decreased their affinity to HBGAs. Comparing both isolates, GII.17 showed a better stability profile and higher affinity to HBGAs than GII.4, making them interesting candidate particles for a future norovirus vaccine. Biological and physicochemical studies of VLPs are as pertinent as ever in view of the future arrival of VLP-based HuNoV vaccines.

Epidemiological Impact of GII.17 Human Noroviruses Associated With Attachment to Enterocytes.

For the last 30 years, molecular surveys have shown that human norovirus (HuNoV), predominantly the GII.4 genotype, is one of the main causative agents of gastroenteritis. However, epidemiological surveys have revealed the worldwide emergence of GII.17 HuNoVs. Genetic analysis confirmed that GII.17 strains are distributed into three variants (i.e., Kawasaki 308, Kawasaki 323, and CS-E1). Here, virus-like particles (VLPs) were baculovirus-expressed from these variants to study putative interactions with HBGA. Qualitative analysis of the HBGA binding profile of each variant showed that the most recent and predominant GII.17 variant, Kawasaki 308, possesses a larger binding spectrum. The retrospective study of GII.17 strains documented before the emergence of the dominant Kawasaki 308 variant showed that the emergence of a new GII.17 variant could be related to an increased binding capacity toward HBGA. The use of duodenal histological sections confirmed that recognition of enterocytes involved HBGA for the three GII.17 variants. Finally, we observed that the relative affinity of recent GII.17 VLPs for HBGA remains lower than that of the GII.4-2012 variant. These observations suggest a model whereby a combination of virological factors, such as polymerase fidelity and increased affinity for HBGA, and immunological factors was responsible for the incomplete and non-persistent replacement of GII.4 by new GII.17 variants.

Titanate Nanotubes Engineered with Gold Nanoparticles and Docetaxel to Enhance Radiotherapy on Xenografted Prostate Tumors.

Nanohybrids based on titanate nanotubes (TiONts) were developed to fight prostate cancer by intratumoral (IT) injection, and particular attention was paid to their step-by-step synthesis. TiONts were synthesized by a hydrothermal process. To develop the customengineered nanohybrids, the surface of TiONts was coated beforehand with a siloxane (APTES), and coupled with both dithiolated diethylenetriaminepentaacetic acidmodified gold nanoparticles (Au@DTDTPA NPs) and a heterobifunctional polymer (PEG3000) to significantly improve suspension stability and biocompatibility of TiONts for targeted biomedical applications. The prefunctionalized surface of this scaffold had reactive sites to graft therapeutic agents, such as docetaxel (DTX). This novel combination, aimed at retaining the AuNPs inside the tumor via TiONts, was able to enhance the radiation effect. Nanohybrids have been extensively characterized and were detectable by SPECT/CT imaging through grafted Au@DTDTPA NPs, radiolabeled with 111In. In vitro results showed that TiONtsAuNPsPEG3000DTX had a substantial cytotoxic activity on human PC3 prostate adenocarcinoma cells, unlike initial nanohybrids without DTX (Au@DTDTPA NPs and TiONtsAuNPsPEG3000). Biodistribution studies demonstrated that these novel nanocarriers, consisting of AuNP- and DTXgrafted TiONts, were retained within the tumor for at least 20 days on mice PC3 xenografted tumors after IT injection, delaying tumor growth upon irradiation.

Loading of Cisplatin into Mesoporous Silica Nanoparticles: Effect of Surface Functionalization.

Cisplatin ( cis-diaminedichloroplatinum(II), CDDP) plays a crucial role in the treatment of various malignant tumors. However, its clinical efficacy and applicability are restricted by issues of toxicity and resistance. Here, for drug delivery purposes, the outer surface of MCM-41 mesoporous silica nanoparticles (MSNs) was functionalized with poly(ethylene glycol) ( Mw = 10 000 g/mol) or low-molecular-weight ( Mw = 1800 g/mol) branched polyethyleneimine (PEI). Given the strong affinity of sulfur for platinum, thiol-functionalized MSNs were synthesized for comparison by co-condensation with (3-mercaptopropyl)triethoxysilane. CDDP loading was performed either by adsorption or impregnation in aqueous media without the use of dimethyl sulfoxide as a solubilizer. CDDP loading capacities obtained by impregnation were higher than those obtained by adsorption and varied from 3.9 to 16.1 wt %, depending on the functional group. Loaded nanomaterials were characterized by scanning electron microscopy, scanning transmission electron microscopy-high-angle annular dark-field, and Raman spectroscopy. Depending on the functional groups, platinum-based species were either dispersed in the nanomaterials as nanocrystals or uniformly distributed as molecular species. The spectral signature of CDDP was strongly modified when platinum species were homogeneously distributed within the nanomaterials. Preliminary drug release studies performed at 37 °C showed that the behavior of CDDP-loaded MSNs strongly depends on the nature of the present functional groups. Among the functionalization routes investigated in this paper, PEI-based functionalization showed the most promising results for further applications in controlled drug release with the absence of burst release and a sustained release over 72 h.

Nanovectorization of TRAIL with single wall carbon nanotubes enhances tumor cell killing.

Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL or Apo2L) is a member of the tumor necrosis factor (TNF) superfamily. This type II transmembrane protein is able to bound specifically to cancer cell receptors (i.e., TRAIL-R1 (or DR4) and TRAIL-R2 (or DR5)) and to induce apoptosis without being toxic for healthy cells. Because membrane-bound TRAIL induces stronger receptor aggregation and apoptosis than soluble TRAIL, we proposed here to vectorize TRAIL using single-walled carbon nanotubes (SWCNTs) to mimic membrane TRAIL. Owing to their exceptional and revolutional properties, carbon nanotubes, especially SWCNTs, are used in a wide range of physical or, now, medical applications. Indeed due to their high mechanical resistance, their high flexibility and their hydrophobicity, SWCNTs are known to rapidly diffuse in an aqueous medium such as blood, opening the way of development of new drug nanovectors (or nanocarriers). Our TRAIL-based SWCNTs nanovectors proved to be more efficient than TRAIL alone death receptors in triggering cancer cell killing. These NPTs increased TRAIL pro-apoptotic potential by nearly 20-fold in different Human tumor cell lines including colorectal, nonsmall cell lung cancer, or hepatocarcinomas. We provide thus a proof-of-concept that TRAIL nanovector derivatives based on SWCNT may be useful to future nanomedicine therapies.

Dispersion of titanate nanotubes for nanomedicine: comparison of PEI and PEG nanohybrids.

In the present study, we report the dispersion of titanate nanotubes (TiONts) via polymer grafting (PolyEthylene Glycol, PEG) or polymer adsorption (polyethylene imine, PEI) where different TiONts/polymer ratios have been investigated. The TiONts/PEI and TiONts/PEG nanohybrids were characterized by scanning and transmission electron microscopy as well as by zeta potential measurements in order to determine both their dispersion state and stability in water (at different pH for zetametry). The nature of the chemical bonds at the surface of these nanohybrids was investigated by Fourier-transformed infrared (FTIR) spectroscopy while the grafting densities of PEG on the nanotubes were quantified by thermogravimetric analyses (TGA). The nanohybrids reported here are promising tools for biotechnology applications due to their tubular morphology, their very good dispersion in water and the reactivity of their surface.

A multi-step mechanism and integrity of titanate nanoribbons.

A one-step hydrothermal treatment of TiO2 powders under strongly basic conditions has been used to synthesize titanate nanoribbons. The nanoparticles were thoroughly characterized using several methods including transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectrometry (XPS) to determine their morphological, structural and chemical characteristics. The influence of the nature and size of the TiO2 precursor and of the reaction duration on the formation of the nanoribbons was investigated. The conditions required to obtain only titanate nanoribbons with a width ranging from 100 to 200 nm and several tens of micrometers in length were determined: the optimum precursor's grain size is about 25 nm and the reaction duration should be at least 20 h. Starting from our experimental results, we propose a multi-step mechanism of formation. In addition, a study of the integrity of the titanate nanoribbon structure reveals that they are made of an assembly of smaller ribbons juxtaposed and piled up on top of one another.

Subphthalocyanines: addressing water-solubility, nano-encapsulation, and activation for optical imaging of B16 melanoma cells.

Water-soluble disulfonato-subphthalocyanines (SubPcs) or hydrophobic nano-encapsulated SubPcs are efficient probes for the fluorescence imaging of cells. 20 nm large liposomes (TEM and DLS) incorporated about 13% SubPc. Moreover, some of these fluorophores were found to be pH activatable.