Form follows function: Applying photographic content analysis to forensic firearm identification.

Drawing forensic conclusions from an image or a video is known as "photographic content analysis." It involves the analysis of an image, as well as objects, actions, and events depicted in images or video. In recent years, photographic depictions of objects suspected as illegal firearms have substantially increased, appearing on CCTV surveillance footage, captured by mobile phones and shared on social media. However, the law in Israel states that a person can be charged with illegally possessing a firearm only if it can be proven that the object is capable of shooting with lethal bullet energy. This becomes more challenging in cases where the firearm was not physically seized, and the evidence exclusively consists of images and video. In this study, photographic content analysis was applied to images and video where objects suspected as commercial or improvised firearms had been depicted. An image and event sequence reconstruction video databases of both firearms and replicas were created in order to better define firearm-specific functional morphological features. We demonstrate that it is possible to classify an object as a firearm by analyzing the functional, and not only the esthetic, morphology in images and video. It is also shown that event sequence reconstruction in video may be used to infer that an object suspected as a firearm has the capacity to shoot by confirming the occurrence of a shooting act or shooting process. Thus, photographic content analysis may be used to forensically establish that an object depicted in an image or a video is a firearm by ruling out other known scenarios, and without physically seizing it.

The narwhal (Monodon monoceros) cementum-dentin junction: a functionally graded biointerphase.

In nature, an interface between dissimilar tissues is often bridged by a graded zone, and provides functional properties at a whole organ level. A perfect example is a "biological interphase" between stratified cementum and dentin of a narwhal tooth. This study highlights the graded structural, mechanical, and chemical natural characteristics of a biological interphase known as the cementum-dentin junction layer and their effect in resisting mechanical loads. From a structural perspective, light and electron microscopy techniques illustrated the layer as a wide 1000-2000 µm graded zone consisting of higher density continuous collagen fiber bundles from the surface of cementum to dentin, that parallels hygroscopic 50-100 µm wide collagenous region in human teeth. The role of collagen fibers was evident under compression testing during which the layer deformed more compared to cementum and dentin. This behavior is reflected through site-specific nanoindentation indicating a lower elastic modulus of 2.2 ± 0.5 GPa for collagen fiber bundle compared to 3 ± 0.4 GPa for mineralized regions in the layer. Similarly, microindentation technique illustrated lower hardness values of 0.36 ± 0.05 GPa, 0.33 ± 0.03 GPa, and 0.3 ± 0.07 GPa for cementum, dentin, and cementum-dentin layer, respectively. Biochemical analyses including Raman spectroscopy and synchrotron-source microprobe X-ray fluorescence demonstrated a graded composition across the interface, including a decrease in mineral-to-matrix and phosphate-to-carbonate ratios, as well as the presence of tidemark-like bands with Zn. Understanding the structure-function relationships of wider tissue interfaces can provide insights into natural tissue and organ function.

Structure-function relations of primate lower incisors: a study of the deformation of Macaca mulatta dentition using electronic speckle pattern interferometry (ESPI).

Teeth adopt a variety of different morphologies, each of which is presumably optimized for performing specific functions during feeding. It is generally agreed that the enamel cap is a crucial element in controlling the mechanical behavior of mammalian teeth under load. Incisors are particularly interesting in terms of structure-function relations, as their role in feeding is that of the 'first bite'. However, little is known how incisor cap morphology is related to tooth deformation. In the present paper we examine the mechanical behavior of mandibular central incisors in the cercopithecine primate Macaca mulatta under loads similar to those encountered during ingestion. We map three-dimensional displacements on the labial surface of the crown as it is compressed, using electronic speckle pattern interferometry (ESPI), an optical metrology method. In addition, micro-computed tomography is used to obtain data regarding the morphology of the enamel cap, which in the M. mulatta lower incisors exhibits missing or very little enamel on the lingual face. The results showed that although compressed along a longitudinal axis, deformation in the incisors mostly occurred in the lingual direction and orthogonal to the direction of the applied load. Both isolated, embedded teeth and teeth in the mandible showed considerable lingual deformation. Incisor deformation in the mandible was generally greater, reflecting the additional freedom of movement enabled by the supporting structures. We show that the association with adjacent teeth in the arch is significant for the behavior of the tooth under load. Finally, loading two teeth simultaneously in the mandible showed that they work as one functional unit. We suggest that these results demonstrate the importance of enamel cap morphology in directing deformation behavior; an ability stemming from the stiffness of the enamel cap overlying the more pliable dentin.

Enamel dictates whole tooth deformation: a finite element model study validated by a metrology method.

In order to understand whole tooth behavior under load the biomechanical role of enamel and dentin has to be determined. We approach this question by comparing the deformation pattern and stiffness of intact teeth under load with the deformation pattern and stiffness of the same teeth after the enamel has been mechanically compromised by introducing a defect. FE models of intact human premolars, based on high resolution micro-CT scans, were generated and validated by in vitro electronic speckle pattern interferometry (ESPI) experiments. Once a valid FE model was established, we exploit the flexibility of the FE model to gain more insight into whole tooth function. Results show that the enamel cap is an intrinsically stiff biological structure and its morphology dictates the way a whole tooth will mechanically behave under load. The mechanical properties of the enamel cap were sufficient to mechanically maintain almost its entire stiffness function under load even when a small defect (cavity simulating caries) was introduced into its structure and breached the crown integrity. We conclude that for the most part, that enamel and not dentin dictates the mechanical behavior of the whole tooth.

Determining the elastic modulus of mouse cortical bone using electronic speckle pattern interferometry (ESPI) and micro computed tomography: a new approach for characterizing small-bone material properties.

Mice phenotypes are invaluable for understanding bone formation and function, as well as bone disease. The elastic modulus is an important property of bones that can provide insights into bone quality. The determination of the elastic modulus of mouse cortical bone is complicated by the small dimensions of the bones. Whole bone bending tests are known to under estimate the elastic modulus compared to nanoindentation tests. The latter however provides information on extremely localized areas that do not necessarily correspond to the bulk elastic modulus under compression. This study presents a novel method for determining the bulk or effective elastic modulus of mouse cortical bone using the femur. We use Electronic Speckle Pattern Interferometry (ESPI), an optical method that enables the measurement of displacements on the bone surface, as it is compressed under water. This data is combined with geometric information obtained from micro-CT to calculate the elastic modulus. Roughly tubular cortical bone segments (2 mm) were cut from the diaphyses of femora of four week old C57BL/6 (B6) female mice and compressed axially using a mechanical tension-compression device. Displacements in the loading direction were mapped on the bone surface after loading the specimen. A linear regression of the displacement vs. axial-position enabled the calculation of the effective strain. Effective stress was calculated using force (N) data from the system's load cell and the mean cross-sectional area of the sample as determined by micro-CT. The effective elastic modulus (E) was calculated from the stress to strain ratio. The method was shown to be accurate and precise using a standard material machined to similar dimensions as those of the mouse femoral segments. Diaphyses of mouse femora were shown to have mean elastic moduli of 10.4+/-0.9 GPa for femora frozen for eight months, 8.6+/-1.4 GPa for femora frozen for two weeks and 8.9+/-1.1 GPa for the fresh femora. These values are much higher than those measured using three-point bending, and lower than values reported in the literature based on nanoindentation tests from mice bones of the same age. We show that this method can be used to accurately and precisely measure the effective elastic modulus of mouse cortical bone.