RESUMO
The excess anthropogenic CO2 depletion via the catalytic approach to produce valuable chemicals is an industrially challenging, demanding, and encouraging strategy for CO2 fixation. Herein, we demonstrate a selective one-pot strategy for CO2 fixation into "oxazolidinone" by employing stable porous trimetallic oxide foam (PTOF) as a new catalyst. The PTOF catalyst was synthesized by a solution combustion method using transition metals Cu, Co, and Ni and systematically characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), N2 sorption, temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS) analysis. Due to the distinctive synthesis method and unique combination of metal oxides and their percentage, the PTOF catalyst displayed highly interconnected porous channels along with uniformly distributed active sites on its surface. Well ahead, the PTOF catalyst was screened for the fixation of CO2 into oxazolidinone. The screened and optimized reaction parameters revealed that the PTOF catalyst showed highly efficient and selective activity with 100% conversion of aniline along with 96% selectivity and yield toward the oxazolidinone product at mild and solvent-free reaction conditions. The superiority of the catalytic performance could be due to the presence of surface active sites and acid-base cooperative synergistic properties of the mixed metal oxides. A doubly synergistic plausible reaction mechanism was proposed for the oxazolidinone synthesis experimentally with the support of DFT calculations along with bond lengths, bond angles, and binding energies. In addition, stepwise intermediate formations with the free energy profile were also proposed. Also, the PTOF catalyst displayed good tolerance toward substituted aromatic amines and terminal epoxides for the fixation of CO2 into oxazolidinones. Very interestingly, the PTOF catalyst could be significantly reused for up to 15 consecutive cycles with stable activity and retention in physicochemical properties.
RESUMO
Supercapacitors store electrical energy by ion adsorption at the interface of the electrode-electrolyte (electric double layer capacitance, EDLC) or through faradaic process involving direct transfer of electrons via oxidation/reduction reactions at one electrode to the other (pseudocapacitance). The present minireview describes the recent developments and progress of carbon-transition metal oxides (C-TMO) hybrid materials that show great promise as an efficient electrode towards supercapacitors among various material types. The review describes the synthetic methods and electrode preparation techniques along with the changes in the physical and chemical properties of each component in the hybrid materials. The critical factors in deriving both EDLC and pseudocapacitance storage mechanisms are also identified in the hope of pointing to the successful hybrid design principles. For example, a robust carbon-metal oxide interaction was identified as most important in facilitating the charge transfer process and activating high energy storage mechanism, and thus methodologies to establish a strong carbon-metal oxide contact are discussed. Finally, this article concludes with suggestions for the future development of the fabrication of high-performance C-TMO hybrid supercapacitor electrodes.
RESUMO
Designing highly efficient and durable electrocatalysts for the oxygen reduction reaction (ORR), the key step for the operation of polymer electrolyte membrane fuel cells (PEMFCs), is of a pivotal importance for advancing PEMFC technology. Since the most significant progress has been made on Pt3Ni(111) alloy surfaces, nanoscale PtNi alloy octahedra enclosed by (111) facets have emerged as promising electrocatalysts toward the ORR. However, because their practical uses have been hampered by the cost, sluggish reaction kinetics, and poor durability, recent advances have engendered a wide variety of structure-, size-, and composition-controlled bimetallic PtNi octahedra. Herein, we therefore review the important recent developments of PtNi octahedral electrocatalysts point by point to give an overview of the most promising strategies. Specifically, the present review article focuses on the synthetic methods for the PtNi octahedra, the core-shell and multi-metallic strategies for performance improvement, and their structure-, size-, and composition-control-based ORR activity. By considering the results achieved in this field, a prospect for this alloy nanocatalysts system for future sustainable energy applications is also proposed.
RESUMO
Rational design and synthesis of efficient hydrogen evolution reaction (HER) electrocatalysts from Earth-abundant elements are essential for the development of economical water-splitting processes. This Frontier article will highlight the recent development and advances in designing ferric phosphide (FeP) based electrode materials for the HER.
RESUMO
Highly efficient and low-cost electrocatalysts are essential for water spitting via electrolysis in an economically viable fashion. However, the best catalytic performance is found with noble metal-based electrocatalysts, which presents a formidable obstacle for the commercial success of electrolytic water splitting-based H2 production due to their relatively high cost and scarcity. Therefore, the development of alternative inexpensive earth-abundant electrode materials with excellent electrocatalytic properties is of great urgency. In general, efficient electrocatalysts must possess several key characteristics such as low overpotential, good electrocatalytic activity, high stability, and low production costs. Direct synthesis of nanostructured catalysts on a conducting substrate may potentially improve the performance of the resultant electrocatalysts because of their high catalytic surface areas and the synergistic effect between the electrocatalyst and the conductive substrate. In this regard, three dimensional (3D) nickel foams have been advantageously utilized as electrode substrates as they offer a large active surface area and a highly conductive continuous porous 3D network. In this review, we discuss the most recent developments in nanostructured materials directly synthesized on 3D nickel foam as potential electrode candidates for electrochemical water electrolysis, namely, the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). We also provide perspectives and outlooks for catalysts grown directly on 3D conducting substrates for future sustainable energy technologies.
RESUMO
Well-dispersed cube-like iron oxide (α-Fe2O3) nanoparticles (NPs) supported on ordered multimodal porous carbon (OMPC) are synthesized for the first time by a facile and efficient glycine-assisted hydrothermal route. The effect of OPMC support on growth and formation mechanism of the Fe2O3 NPs is discussed. OMPC as a supporting material plays a pivotal role of controlling the shape, size, and dispersion of the Fe2O3 NPs. As-synthesized α-Fe2O3/OMPC composites reveal significant improvement in the performance as electrode material for supercapacitors. Compared to the bare Fe2O3 and OMPC, the composite exhibits excellent cycling stability, rate capability, and enhanced specific capacitances of 294â F g(-1) at 1.5â A g(-1), which is twice that of OMPC (145â F g(-1)) and about four times higher than that of bare Fe2O3 (85â F g(-1)). The improved electrochemical performance of the composite can be attributed to the well-defined structure, high conductivity, and hierarchical porosity of OMPC as well as the unique α-Fe2O3 NPs with cube-like morphology well-anchored on the OMPC support, which makes the composite a promising candidate for supercapacitors.
Assuntos
Carbono/química , Fontes de Energia Elétrica , Compostos Férricos/química , Nanopartículas/química , Capacitância Elétrica , Eletrodos , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Nanopartículas/ultraestrutura , PorosidadeRESUMO
An easy aqueous 'one-pot' synthesis route for the fabrication of single crystalline uniform iron hydroxide (beta-FeOOH) nanorods at low temperature is reported. beta-FeOOH nanorods with diameters of 5-37 nm and lengths up to 45-185 nm were obtained by varying the reaction parameters. Addition of ethanol was found to be crucial to control the aspect ratio. After calcination at 250 degrees C for 2 h the as-obtained beta-FeOOH nanorods was converted to alpha-Fe2O3 nanorods. To the best of our knowledge, beta-FeOOH nanorods having diameter less than 6 nm is reported for the first time.
RESUMO
Hierarchical nanostructured carbon with a hollow macroporous core of ca. 60 nm in diameter in combination with mesoporous shell of ca. 30 nm in thickness has been explored as counter electrode in metal-free organic dye-sensitized solar cell. Compared with other porous carbon counterparts such as activated carbon and ordered mesoporous carbon CMK-3 and Pt counter electrode, the superior structural characteristics including large specific surface area and mesoporous volume and particularly the unique hierarchical core/shell nanostructure along with 3D large interconnected interstitial volume guarantee fast mass transport in hollow macroporous core/mesoporous shell carbon (HCMSC), and enable HCMSC to have highly enhanced catalytic activity toward the reduction of I(3)(-), and accordingly considerably improved photovoltaic performance. HCMSC exhibits a V(oc) of 0.74 V, which is 20 mV higher than that (i.e., 0.72 V) of Pt. In addition, it also demonstrates a fill factor of 0.67 and an energy conversion efficiency of 7.56%, which are markedly higher than those of its carbon counterparts and comparable to that of Pt (i.e., fill factor of 0.70 and conversion efficiency of 7.79%). Furthermore, HCMSC possesses excellent chemical stability in the liquid electrolyte containing I(-)/I(3)(-) redox couples, namely, after 60 days of aging, ca. 87% of its initial efficiency is still achieved by the solar cell based on HCMSC counter electrode.
RESUMO
A simple and efficient approach has been developed for synthesis of carbon-supported Pt nanoparticles (NPs) that combines homogeneous deposition (HD) of Pt complex species through a gradual increase of pH realized by in situ hydrolysis of urea and subsequent uniform reduction by ethylene glycol (EG) in a polyol process, giving control over the size and dispersion of Pt NPs. With increasing amount of urea in the starting Pt salt aqueous solution, the size of Pt complex species decreases and so does that of the metallic Pt NPs. The decrease in size of the Pt species is likely attributable to two determining factors: the steric contraction effect and the electrostatic charge effect. The excellent electrocatalysis ability of the Pt catalysts produced by HD-EG is demonstrated through the determination of electrochemical surface area and fuel-cell polarization performance. The Pt NPs deposited on Vulcan XC-72 (VC) carbon black by the HD-EG strategy show smaller size with more uniform dispersion, higher Pt utilization efficiency, and considerably improved fuel-cell polarization performance compared with the Pt NPs prepared by conventional sodium borohydride reduction or by a microwave-assisted polyol approach. Particularly important and significant is that this HD-EG method is very efficient for the synthesis of high Pt loading catalysts with tunable NP size and uniform particle dispersion. A high metal loading catalyst such as Pt(60 wt %)/VC fabricated by the HD-EG method outperforms ones with mid-to-low metal loadings (i.e., 40 and 20 wt %), even at a very low catalyst loading of 0.2 mg of Pt cm(-2) at the cathode, which is for the first time reported for the VC-supported Pt catalysts.
RESUMO
The fluorescence enhancement of ruthenium complex (Ru(bpy)3(2+)) was studied on silver surface deposited by simple Tollens mirror reaction. The plasmon effects on spacer distance, silver concentration, and deposition methods were examined. Silver nanoparticles prepared were coated with different chain length carboxylic acid-terminated thiols as spacers. This leads to development of distance between Ag and Ru dye being varied from 4 to 23 A. Effect of different silver deposition methods on the emission spectra was also studied using metal evaporator deposition method. The results show that Ag concentration, Ag film roughness, and specific distance between metal and dye should be tuned for a maximum increase in fluorescence.