Cholesterol vs Ergosterol: Influence on the Dynamic and Structural Properties of the Cobalt-Based Metallosomal Bilayer Membrane.

Sterol derivatives are a crucial part of liposomes, as their concentration and nature can induce significant alternations in their characteristic features. For natural liposomal-based (phospholipid-based) studies, the bulk literature is already present depicting the role of the concentration or nature of different sterol derivatives in modulation of membrane properties. However, the studies aiming at evaluating the effect of sterol derivatives on synthetic liposomal assemblies are limited to cholesterol (Chl), and a comparative effect with other sterol derivatives, such as ergosterol (Erg), has never been studied. To fill this research gap, through this work, we intend to provide insights into the concentration-dependent effect of two sterol derivatives (Chl and Erg) on a synthetic liposomal assembly (i.e., metallosomes) prepared via thin film hydration route using a double-tailed metallosurfactant fabricated by modifying cetylpyridinium chloride with cobalt (Co) (i.e., Co:CPC II). The morphological evaluations with cryogenic-transmission electron microscopy (cryo-TEM), atomic force microscopy (AFM), and field emission-scanning electron microscopy (FE-SEM) indicated that metallosomes retained their spherical morphology irrespective of the nature and concentration of sterol derivatives. However, the size, ζ-potential, and lamellar width values were significantly modified with the incorporation of sterol derivatives in a concentration-dependent manner. In-depth studies affirmed that the extent of modulation of the bilayer in terms of hydrophobicity, fluidity, and rigidity was more severe with Chl than Erg. Such differences in the membrane properties lead to their contrasting behavior in the delivery of the broad-spectrum active compound "curcumin". From entrapment to in vitro behavior, the metallosomes demonstrated dissimilar behavior as even though Erg-modified metallosomes (at higher concentrations of Erg) exhibited low entrapment efficiency, they still could easily release >80% of the entrapped drug. In vitro studies conducted with Staphylococcus aureus bacterial cultures further revealed an interesting pattern of activity as the incorporation of Chl reduced the toxicity of the self-assembly, whereas their Erg-modified counterparts yielded slightly augmented toxicity toward these bacterial cells. Furthermore, Chl- and Erg-modified assemblies also exhibited contrasting behavior in their interaction studies with bacterial DNA.

Recent advancements and prospects in carbon-based nanomaterials derived from biomass for environmental remediation applications.

The conversion of waste biomass into a value-added carbonaceous nanomaterial highlights the appealing power of biomass valorization. The advantages of using sustainable and cheap biomass precursors exhibit the tremendous opportunity for boosting energy production and their application in environmental remediation processes. This review emphasis the development and production of carbon-based nanomaterials derived from biomass, which possess favourable characteristics such as biocompatibility and photoluminescence. The advantages and limitations of various nanomaterials synthesised from different precursors were also discussed with insights into their physicochemical properties. The surface morphology of the porous nanomaterials is also explored along with their characteristic properties like regenerative nature, non-toxicity, ecofriendly nature, unique surface area, etc. The incorporation of various functional groups confers superiority of these materials, resulting in unique and advanced functional properties. Further, the use of these biomass derived nanomaterials was also explored in different applications like adsorption, photocatalysis and sensing of hazardous pollutants, etc. The challenges and outcomes obtained from different carbon-based nanomaterials are briefly outlined and discussed in this review.

Lateral flow assemblies and allied application of carbon quantum dots derived from cigarette tobacco in biosensing, anticounterfeiting and fluorescent films: Theoretical and experimental overview.

The bio-sensing activity of fluorescence based nanoprobes is one of the most significant aspects to scrutinize the analytical pursuance in modern security and lateral flow assays. Herein, potent transmogrification of waste cigarette tobacco into fluorescent carbon quantum dots (CQDs) has been achieved by calcination approach. The waste transformation to CQDs holds diverse benefits, comprising high quantum yield, low toxicity and scale up synthesis. The developed CQDs were able to identify tetracycline with phenomenal selectivity and sensitivity through fluorescence based method. The sensing mechanism was fully explored using Density Functional Theory (DFT) and Molecular docking studies. Governing features comprising tetracycline concentration, interfering studies, and real water analysis on the identification of tetracycline were also investigated. Along with, the prepared CQDs act as colorimetric probe, facilitating the detection of tetracycline with the naked eye. The lateral flow device was constructed for the on-site detection of tetracycline in real water samples. To the best of our knowledge, the present work represents a novel approach to designing CQDs and demonstrates their significant potential for application in anticounterfeiting measures and lateral flow devices. This work holds significant prospective as the prepared CQDs was fully utilized to its maximum usage in developing films and fluorescent anti-counterfeiting applications. Concisely, current work opens up distinctive opportunities for rapid on-site, real-time and visualized surveillance of tetracycline using CQDs prepared with a quite simple green approach.

Metallosurfactant aggregates: Structures, properties, and potentials for multifarious applications.

Metallosurfactants offer important scientific and technological advances due to their novel interfacial properties. As a special class of structures formed by the integration of metal ions into amphiphilic surfactant molecules, these metal-based amphiphilic molecules possess both organometallic and surface chemistries. This review critically examines the structural transitions of metallosurfactants from micelle to vesicle upon metal coordination. The properties of a metallosurfactant can be changed by tuning the coordination between the metal ions and surfactants. The self-assembled behavior of surfactants can be controlled by selecting transition-metal ions that enhance their catalytic efficiency in environmental applications by applying a hydrogen evolution reaction or oxygen evolution reaction. We present the different scattering techniques available to examine the properties of metallosurfactants (e.g., size, shape, structure, and aggregation behavior). The utility of metallosurfactants in catalysis, the synthesis of nanoparticles, and biomedical applications (involving diagnostics and therapeutics) is also explored.

Biogenic synthesis of highly fluorescent carbon dots using Azadirachta indica leaves: An eco-friendly approach with enhanced photocatalytic degradation efficiency towards Malachite green.

A simpler and efficient method has been developed for the green synthesis of highly fluorescent carbon dots (CDs) from Azadirachta Indica leaves. The surface morphology of developed CDs has shown the existence of spherical particles in the size range of 3-8 nm with superior biocompatibility and high quantum yield value i.e. 42.3%. The particles exhibited a highly fluorescent and crystalline nature along with a bandgap value of 4.02 eV. The prepared CDs served as a factorial design for the sensing and degradation of Malachite green among other dyes. The main perspective of the current finding is that the designed catalyst exhibits excellent sensing results towards Malachite green with a limit of detection i.e. 0.144 µM in the concentration range of 0-50 µM. Moreover, the UV triggered results of photocatalysis illustrated a good dye removal efficacy by developed CDs with an average of 90.73, 98.25, 52 and 6.13% degradation in Methylene blue (MB), Malachite green (MG), Rhodamine 6G (Rh 6G) and Methyl orange (MO) upon 70 min of irradiation with mercury lamp. Additionally, the proton NMR, FTIR and FESEM results of the recycled samples also confirm the complete degradation of MG dye with the application of N-CDs.

Label free dual-mode sensing platform for trace level monitoring of ciprofloxacin using bio-derived carbon dots and evaluation of its antioxidant and antimicrobial potential.

Being a persuasive antibiotic, ciprofloxacin is widely administered to patients and its excessive discharge has generated a keen interest among researchers for its detection in water resources. Therefore, the current work utilizes the virtues of carbon dots synthesized from the leaves of Ocimum sanctum as an economical and convenient bimodal stratagem for the detection of ciprofloxacin via an electrochemical and fluorometric approach. The insight into photostability, size, morphology, and optical studies of the carbon dots was tested to enhance their scope in sensing. The excellent photoluminescence-based excitation-dependent behavior with a quantum yield of 46.7% and non-requirement of any kind of labeled surface variations for amending their fluorescence and electrochemical properties have further supported the utilization of as-prepared carbon dots in trace-level monitoring of ciprofloxacin. The fluorescence emission intensity and peak current were enhanced by many folds via the application of Ocimum sanctum-derived carbon dots. The synergetic effect of carbon dots has possessed a linear relationship between the peak current/emission intensity within the range of 0 to 250 µM of ciprofloxacin and the lowest detection limit value was found to be 0.293 and 0.0822 µM with fluorometric and electrochemical methods, respectively. The sensor demonstrated excellent applicability for the estimation of ciprofloxacin and acts as a high-performance dual sensor for further applications.

Biocompatible metallosurfactant-based nanocolloid-loaded Rose Bengal with excellent singlet oxygen-induced phototoxicity efficiency against cancer cells.

Photodynamic therapy (PDT) is facing challenges such as poor solubility, precise delivery, self-aggregation, and photobleaching of photosensitizers with cancer cells due to their less tendency to accumulate in tumor tissues. To address these challenges, we have explored a Rose Bengal (RB)-loaded metallocatanionic vesicles (MCVs) nanosystem for the phototoxicity of cancer cells. Different sets of MCVs were prepared by two different cationic single-chain metallosurfactants, i.e., hexadecylpyridinium trichlorocuprate (CuCPC I) and hexadecylpyridinium trichloroferrate (FeCPC I) in combination with anionic double-chain sodium bis(2-ethylhexyl)sulfosuccinate (AOT) surfactant in phosphate buffer saline of pH 7.4. The RB-loaded CuCPC I:AOT and FeCPC I:AOT vesicles enhanced the maximum singlet oxygen (1O2) generation by 1-fold and 3-fold, respectively, compared to pure RB. Upon irradiation with a 532 nm laser for 10 min, these RB-loaded CuCPC I:AOT and FeCPC I:AOT MCVs significantly decreased the metabolic activity of U-251 cells by 70% and 85% at MCVs concentration of 0.75 µM, respectively. Furthermore, RB-loaded MCVs showed the highest intracellular 1O2-mediated membrane damage and cell-killing effect as confirmed by singlet oxygen sensor green and differential nuclear staining assay, which is attributed to the cellular uptake profile of different RB-loaded MCVs fractions. Caspase 3/7 assay confirmed the apoptotic pathway of cell death by activating caspase. Therefore, the photoactivation of RB-loaded MCVs led to a significant reduction in the viability of U-251 cells (maximum 85%), which resulted in cell death. Our study demonstrated the advantage of using these dual-charge and biocompatible metallocatanionic vesicles as a promising delivery system of photodynamic therapy that can enhance 1O2 generation from PS and can be further utilized in photomedicine.

Solvatochromism as a Novel Tool to Enumerate the Optical and Luminescence Properties of Plastic Waste Derived Carbon Nanodots and Their Activated Counterparts.

Herein, we have developed a one-pot methodology to synthesise three types of C-dots and their activated counterparts from three different types of waste plastic precursors such as poly-bags, cups and bottles. The optical studies have shown the significant change in the absorption edge in case of C-dots in comparison to their activated counterparts. The respective variation in the sizes is correlated with the change in electronic band gap values of formed particles. The changes in the luminescence behaviour are also correlated with transitions from the edge of the core of formed particles. The obtained variations in the Stokes shift values of C-dots, and their ACs were used to explore the types of surface states and their related transitions in particles. The mode of interaction between C-dots and their ACs was also determined using solvent-dependent fluorescence spectroscopy. This detailed investigation could provide significant insight on the emission behaviour and the potential usage of formed particles as an effective fluorescent probe in sensing applications.

3-Methoxyazetidin-2-one Functionalized CuO-CB Microfibrils: A Drug Formulation with Controlled Release and Enhanced Synergistic Antibacterial Activities.

trans-1-(4'-Methoxyphenyl)-3-methoxy-4-phenyl 3-methoxyazetidin-2-one (or 3-methoxyazetidin-2-one) is one of the important ß-lactam derivatives with an ample range of bacterial activities yet few restrictions. To enhance the competency of the chosen 3-methoxyazetidin-2-one, microfibrils composed of copper oxide (CuO) and filter scraps of cigarette butts (CB) were chosen in the current work for developing a potential release formulation. The preparation of CuO-CB microfibrils required a simple reflux technique and a subsequent calcination treatment. The loading of 3-methoxyazetidin-2-one was processed via controlled magnetic stirring followed by centrifugation with microfibrils of CuO-CB. To confirm the loading efficiency, the 3-methoxyazetidin-2-one@CuO-CB complex was analyzed by scanning electron microscopy, transmission electron microscopy, and infrared spectroscopy. Compared to the CuO nanoparticles, the release profile of CuO-CB microfibrils indicates only 32% of the drug release in the first 1 h at pH 7.4. As a model organism, E. coli has been utilized for in vitro drug release dynamic studies. Based on the observed drug release data, it was found that the prepared formulation evades premature drug release and triggers the on-demand release of drug inside bacterial cells. The controlled drug release by 3-methoxyazetidin-2-one@CuO-CB microfibrils over a period of 12 h further ascertained the excellent bactericide delivery mechanism to combat deadly bacterial resistance. Indeed, this study provides a strategy to combat antimicrobial resistance and eradicate bacterial disease via nanotherapeutics.

Biomonitoring and risk assessment of naturally and chemically synthesized iron-oxide nanoparticles: A comparative approach.

Nanostructured oxides and oxyhydroxides of iron are imperative constituents of the Earth's geological and biological processes i.e. biogeochemical cycles. So, the characteristic applications of iron oxide nanoparticles (FeONps) are closely linked to their surroundings and biological sinks. This work reports a low-cost green approach to promote 'waste-to-wealth' ideology by the direct and self-catalysis of iron rust into its nanoparticles (N-FeONps). A comparison is drawn based on the properties, morphologies, and applications after synthesizing FeONps by chemical precipitation method (C-FeONps). Spherical nanoparticles with vibrational properties are obtained in the size domain of 32 nm (N-FeONps) and 23 nm (C-FeONps). The application of Uniform deformation model, Uniform stress deformation model, Uniform deformation energy density model, and Size-strain plot models reveal comparatively greater defects in the crystal structures of C-FeONps. The biosafety profiling of natural and chemically designed nano-units performed on the species of bacteria, fungus, algae, and plants have shown enhanced safety terms associated with N-FeONps. The performance of N-FeONps has surpassed its chemical counterpart in medical applications such as antioxidant activity and anti-inflammatory activity with approximate percentages of 26 % and 51 % respectively. The findings of this piece of work favors the naturally obtained FeONps (N-FeONps), as they are economically viable, non-toxic, and have a greater antioxidant and anti-inflammatory arena. Hence, this waste-to-wealth ideology should be promoted for maintaining waste and designing solutions for the medical industries in one go.

MC-Au/MSS-Z8 porous network assisted advanced electrochemical immunosensing of 25-hydroxyvitamin D3.

On-site monitoring of vitamin D levels is subject matter of immediate attention owing to the serious aftermath of its long standing deficiency. Therefore, a novel and efficient voltammetric immunosensing of 25-hydroxyvitamin D3 (25(OH)VD3) has been experimented based on an advanced sensing platform composed of meso-microporous silica-zeolitic imidazolate framework-8 (MSS-Z8) with highly enhanced surface area (SBET, MSS-Z8 (643.4 m2g-1) > SBET, MSS (49.95 m2g-1)), embedded with gold particles (mass loading of 82 µg), particularly of microcubic morphology (MC-Au). Further, the MC-Au/MSS-Z8/FTO platform was fashioned with antibody specific to 25(OH)VD3 via interaction between Au and abundant -SH groups present on the antibody surface. After optimization of operational parameters, the Ab/MC-Au/MSS-Z8/FTO immunosensor was employed for the determination of 25(OH)VD3 within 0.01-106 pg mL-1 concentration range through differential pulse voltammetry technique in [Fe(CN)6]3-/4-. Thus, 0.01 pg mL-1 concentration of 25(OH)VD3 was the experimental limit of detection of the immunosensor. Further, upon examination of various analytical parameters, it turns out that the immunosensor exhibited low theoretical LOD (0.23 pg mL-1) and LOQ (0.76 pg mL-1), wide linear range (0.01-106 pg mL-1), ultra-sensitivity (143.9 µA [log (pg mL-1)]-1 cm-2), adequate reproducibility (RSD ≤1.23%) and acceptable shelf life. Most importantly, the immunosensor presented proficient performance with spiked human serum samples (Recovery = 97.20-100.7%, RSD value < 5.6%), evincing the adequacy of present biosensing approach.

Bio-Derived Fluorescent Carbon Dots: Synthesis, Properties and Applications.

The transformation of biowaste into products with added value offers a lucrative role in nation-building. The current work describes the synthesis of highly water-soluble, luminous carbon quantum dots (CQDs) in the size range of 5-10 nm from discarded rice straw. The small spherical CQDs that were formed had outstanding optical and luminescent qualities as well as good photostabilities. By performing quantitative multi-assay tests that included antioxidant activities, in vitro stability and colloidal assay investigations as a function of different CQD concentrations, the biocompatibility of CQDs was evaluated. To clearly visualize the type of surface defects and emissive states in produced CQDs, excitation-dependent fluorescence emission experiments have also been carried out. The "waste-to-wealth" strategy that has been devised is a successful step toward the quick and accurate detection of Cu2+ ion in aqueous conditions. The fluorescence-quenching behavior has specified the concentration dependency of the developed sensor in the range of 50 µM to 10 nM, with detection limit value of 0.31 nM. The main advantage of the current research is that it offers a more environmentally friendly, economically viable and scaled-up synthesis of toxicologically screened CQDs for the quick fluorescence detection of Cu2+ ions and opens up new possibilities in wastewater management.

Sustainable agronomic response of carbon quantum dots on Allium sativum: Translocation, physiological responses and alternations in chromosomal aberrations.

The revolutionary growth in the usage of carbon quantum dots (CQDs) in different areas have ultimately directed their discharge in the environment and further augmented the exposure of agricultural crops to these released particles. Therefore, the aim of current study is to evaluate the uptake, translocation and phytotoxicity of blue emissive CQDs on Allium sativum plant. The genotoxicity and cytotoxicity assessment of CQDs towards Allium sativum roots was estimated as function of three different concentrations. Considering the role of CQDs in promoting seed germination at 50 ppm concentration, a greenhouse experiment was performed to evaluate their effect on plant growth. Systematic investigations have shown the translocation of CQDs and their physiological response in terms of increased shoot length wherein P-CQDs exhibited more accumulation into Allium sativum parts. Our investigations unfold the opportunity to utilize Aegle marmelos fruit derived CQDs as a growth regulator in variety of other food plants.

Metallosurfactant based synthetic liposomes as a substitute for phospholipids to safely store curcumin.

Curcumin has shown remarkable therapeutic utilization for various medical conditions. Still, its limited chemical stability and rapid hydrolysis capped its applications to a certain extent. Approaches have been made in the past to surpass these shortcomings by encapsulating the drug in surfactant-based micelles or liposomes and so far, natural surfactants have been used to do this bidding. Through this report, we are presenting curcumin entrapped inside synthetic metal-based liposomal assembly (metallosomes) based on hybrid-surfactants known as metallosurfactants (MS). Three metallosomes i.e. metallosomes (a), (b), and (c) were synthesized with increasing cholesterol (Chl) ratio w.r.t MS (MS:Chl 1:0, 1:0.5, and 1:1). Firstly, the membrane properties of the metallosomes were studied in the absence of the drug. The studies confirmed the direct influence of Chl concentration on the membrane properties and the metallosomes were found to be more hydrophobic, rigid, homogenous, stable, and less fluid with Chl incorporation. These studies were proven beneficial when drug-loaded metallosomes were studied and metallosomes (c), with the highest Chl content, emerged as the maximum drug loader due to their most hydrophobic nature. However, the drug was released at the slowest rate for this metallosomal system due to its less fluid and more rigid nature. On the other hand, these metallosomes were more efficient for shielding entrapped drug from acidic and alkaline environs as lesser drug degradation was observed in the experiments compared to the free curcumin. These metallosomes also exhibited efficient interactional behavior with bacterial (MRSA) DNA.

Seed germination studies on Chickpeas, Barley, Mung beans and Wheat with natural biomass and plastic waste derived C-dots.

Agronomical providence of nanoparticles in enhancing food productivity has brought new revolution in agricultural sector. However, the comprehensive ingenuity of their synergetic impact on environment and living flora and fauna is still poorly explored. The current study endeavours to tackle this apprehension by systematically exploring the agronomical paradigm of six different types of C-dots derived from natural biomass and plastic waste on the four different types of seeds viz. black chick peas (Cicer arietinum), barley (Hordeum vulgare), mung beans (Vigna radiata) and wheat (Triticum aestivum) at room temperature. C-dots have displayed a dose responsive effect (250 to 5000 mg/L) on the growth of chosen seeds, including the elongation of root length and coleoptile length. The development of seedlings under atmospheric conditions exhibited excellent physiological stability in presence of synthesized C-dots for all types of seeds with concentrations as high as 3000 mg/L for dry seed. The direct exposure of C-dots resulted in enhanced growth as compared to the water exposure and considered as the most important novel aspect of present work. The developed C-dots provide more nutrient content and easy penetration to the seeds due to their enhanced surface area and very small size. The germination and Vigor index have also been augmented in presence of C-dots after 7 days of exposure. C-dots have affected the chlorophyll content in mung beans as a function of time and concentration. The developed C-dots possess excellent biocompatible behaviour and help in the complete growth of the different types of seeds which suggest their enhanced utilization in the agronomical field. This is one of the detailed studies, which explore the impact of C-dots on widely used food crops with the non-toxic and biocompatible C-dots. The information achieved herein will allow the usage of C-dots as a capable nanopriming agent for the natural germination of seeds.

Gemini Surfactant Mediated Catansomes for Enhanced Singlet Oxygen Generation of Rose Bengal and Their Phototoxicity against Cancer Cells.

Photodynamic therapy (PDT) is an innovative technique for cancer treatment with minimal side effects, based on the use of a photosensitizer, oxygen, and light. Photosensitizers (PSs) have several limitations, that may limit their clinical use, like poor solubilization, self-aggregation, and lack of specific targeting, which can be addressed with the use of nanomaterials. Herein, a unique type of catansomes (CaSs) was prepared using a gemini imidazolium-based surfactant (1,3-bis[(3-octadecyl-1-imidazolio)methyl]benzene dibromide (GBIB) and a double chain surfactant, diaoctyl sodium sulfosuccinate or Aerosol OT (AOT). The formation of CaS GBIB/AOT was optimized in various ethanol/water (E/W) solvent ratios by employing a facile, quick, and most reliable solution-solution mixing method. The CaS was characterized by dynamic light scattering (DLS) and field emission gun scanning electron microscopy (FEG-SEM) techniques. The experimental results reveal that stable CaSs with a spherical shape were obtained at lower concentration (100 µM). Rose Bengal (RB), a PS of the xanthene family, was incorporated into these prepared CaSs, as proven by fluorescence spectroscopy, UV-visible absorption spectroscopy, and confocal laser scanning microscopy. Singlet oxygen (1O2) generation studies revealed the relevant role of the E/W solvent ratio as there was a 4-fold boost in the 1O2 production for GBIB/AOT in E/W = 50:50 and around 3-fold in E/W = 30:70. Also, the GBIB-rich 80:20 fraction was more efficient in increasing the 1O2 generation as compared to the AOT rich fraction (20:80). Further, their phototoxicity was tested in a water-rich solvent ratio (E/W = 30:70) against MCF-7 cells. Upon irradiation with a 532 nm laser (50 mW) for 5 min, RB@GBIB/AOT(20:80) fraction caused 50% decrease in the metabolic activity of MCF-7 cells, and RB@GBIB/AOT(80:20) fraction produced a maximum 85% decrease in cell viability. Furthermore, the enhancement in intracellular 1O2 generation by RB@GBIB/AOT, as compared to pure RB, was confirmed with singlet oxygen sensor green (SOSG). This new type of CaS based on gemini surfactants exhibiting a large amount of 1O2 generation, holds great interest for several applications, such as use in photomedicine in future.

Design and applications of metallo-vesicular structures using inorganic-organic hybrids.

In advanced biomedical diagnosis, various supramolecular assemblies based on inorganic-organic hybrids have found great interest as functional materials. These assemblies describe a new field of metallovesicles where the introduction of metal ions enables the chemical manipulation of assemblies in terms of their structural stability, redox activity, and pH stability. Additionally, they mimic the elaborative architecture of natural liposomal assemblies and exhibit hierarchical morphologies, and promise novel functions. With the constant developments in this field, various supramolecular assemblies such as MCsomes, Polymersomes, and Metallosomes, etc. came into existence. These hybrid assemblies have been utilized for several applications such as drug delivery, MRI contrasting, DNA delivery, and catalytic activity. The key advantage of these assemblies is their ability to deliver therapeutics to specific locations due to their biomimetic properties and release their contents at the desired time. Hence, they provide a valuable platform for the treatment of a variety of diseases. Through the present article, we intend to provide insights into the latest developments made in this field. This modularity underscores the tremendous promise of supramolecular assemblies as an emerging interdisciplinary research branch at the interface of chemistry and biological sciences.

Metallocatanionic vesicle-mediated enhanced singlet oxygen generation and photodynamic therapy of cancer cells.

In clinics, photodynamic therapy (PDT) is established as a non-invasive therapeutic modality for certain types of cancers and skin disease. However, due to poor water solubility, photobleaching, and the dark toxicity of photosensitizers (PSs), further developments are required to improve the efficiency of PDT. Herein, we report the role of metallocatanionic vesicles (MCVs) in enhancing the phototoxicity of methylene blue (MB) against cancer cells. These MCVs were prepared via a facile and quick solution-solution mixing method using a cationic single-chain metallosurfactant (FeCPC I) in combination with anionic sodium oleate (Na Ol). For singlet oxygen (1O2) generation and PDT studies, two fractions of FeCPC I : Na Ol, i.e., 30 : 70 (V37) and 70 : 30 (V73), were chosen based on their long-term stability in aqueous media. A cationic PS MB was loaded into these vesicles. The MB-loaded MCV 30 : 70 and 70 : 30 fractions enhanced the 1O2 generation by 0.10- and 0.40-fold, respectively, compared with MB alone. Upon illumination using a 650 nm laser, these MB-loaded V73 and V37 MCVs significantly decreased the metabolic activity of MCF-7 cells by ≤50% at a concentration of 0.75 µM. Furthermore, the SOSG assay revealed that the synthesized MCVs enhanced the intracellular 1O2 compared with MB alone. The MB-loaded V73 MCVs showed the highest 1O2-mediated membrane damage and cell-killing effect, as confirmed using the differential nuclear staining assay (DNS), which is attributed to the cellular uptake profile of the different MCV fractions. Altogether, this work shows the advantage of using these biocompatible and dual-charge MCVs as promising delivery vehicles that can enhance the 1O2 generation from the PS. This work suggests the future application of these Fe-MCVs in magnetically guided PDT.

Transformation of solid plastic waste to activated carbon fibres for wastewater treatment.

In this study, the solid waste plastic was converted into activated carbon fibres through carbonization and chemical activation process. The morphological structure, composition, thermal stability and pore structure of the produced activated carbon materials were characterized. The results revealed that the activation process substantially increases the specific surface area of carbon materials via forming large micropores and mesopores (0.01-0.85 cm3g-1) within average nano size range of 50-100 nm. This study provides an effective means to remove the thymol blue dye via adsorption over activated carbon (ACs) as adsorbent. Batch adsorption of thymol blue was conducted to verify the effect of variety of pH, dye concentrations, contact time, adsorbent dose and temperature. The highest dye removal efficiency (approximately 98.05%) of ACs generated from waste plastic polybags, cups and bottles was observed at 10 ppm of thymol blue dye. The results also exhibited that the dye adsorption was favourable at basic pH (9.0) and increasing amount of adsorbent dosage promotes the dye removal efficiency. The excellent dye removal performance was primarily due to the presence of higher available surface area on the surface of developed carbon fibres. In addition, the current results have given the large overview and useful information of dye removal properties by adsorption isotherm and kinetic measurements. The adsorption kinetics and thermodynamic prospective of formed ACs explored the physical, spontaneous and endothermic adsorption process. The as prepared ACs provided easy regeneration of adsorbents with fast response which further suggests the efficiency of nanoparticles to promote their usage up to 5 consecutive cycles. The current work illustrated that better means to transform solid waste plastic into carbon fibres for providing effective and cheap viable option for the fast removal of thymol blue dye from waste water samples.

Fluorescent carbon dots from Indian Bael patra as effective sensing tool to detect perilous food colorant.

Herein a simple strategy has been demonstrated for the synthesis of environmentally amiable and highly fluorescent carbon dots from the most useful plant of Indian classical Ayurveda i.e. Bael patra fruit. The morphological features and chemical composition of the prepared carbon dots were characterized through High resolution transmission electron microscopy, Field emission scanning electron microscopy and X-ray photoelectron spectroscopy. Owing to their highly emission nature, the applicability of carbon dots was tested against various food colorant i.e. Allura red. Under the optimized conditions, the decreased fluorescence intensity exhibited a good linear relationship with increasing concentration of Allura red. Additionally, an extensive research was carried out to determine the adsorption efficiency of carbon dots for Allura red and heavy metals. Based on the context, here we report the novelty of this work, demonstrating the decontamination of various samples from Allura red and heavy metals with the application of carbon dots.