Concepts of circular economy for sustainable management of electronic wastes: challenges and management options.

The electronic and electrical industrial sector is exponentially growing throughout the globe, and sometimes, these wastes are being disposed of and discarded with a faster rate in comparison to the past era due to technology advancements. As the application of electronic devices is increasing due to the digitalization of the world (IT sector, medical, domestic, etc.), a heap of discarded e-waste is also being generated. Per-capita e-waste generation is very high in developed countries as compared to developing countries. Expansion of the global population and advancement of technologies are mainly responsible to increase the e-waste volume in our surroundings. E-waste is responsible for environmental threats as it may contain dangerous and toxic substances like metals which may have harmful effects on the biodiversity and environment. Furthermore, the life span and types of e-waste determine their harmful effects on nature, and unscientific practices of their disposal may elevate the level of threats as observed in most developing countries like India, Nigeria, Pakistan, and China. In the present review paper, many possible approaches have been discussed for effective e-waste management, such as recycling, recovery of precious metals, adopting the concepts of circular economy, formulating relevant policies, and use of advance computational techniques. On the other hand, it may also provide potential secondary resources valuable/critical materials whose primary sources are at significant supply risk. Furthermore, the use of machine learning approaches can also be useful in the monitoring and treatment/processing of e-wastes. HIGHLIGHTS: In 2019, ~ 53.6 million tons of e-wastes generated worldwide. Discarded e-wastes may be hazardous in nature due to presence of heavy metal compositions. Precious metals like gold, silver, and copper can also be procured from e-wastes. Advance tools like artificial intelligence/machine learning can be useful in the management of e-wastes.

Nitrate contamination in water resources, human health risks and its remediation through adsorption: a focused review.

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate's high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45-50 mgNO3-/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.

Biodegradation of 4-chlorophenol in batch and continuous packed bed reactor by isolated Bacillus subtilis.

In present work, biodegradation of 4-Chlorophenol (4-CP) has been successfully achieved using bacteria i.e. Bacillus subtilis (MF447841.1), which was isolated from the wastewater of a nearby drain of Hyundai Motor Company service centre, Agartala, Tripura (India). Geonomic identification was carried out by 16 S rDNA technique and phylogenetic processes. Both, batch and column mode of experiments were performed to optimize various parameters (initial concentration, contact time, dosages etc.) involved in the significant biodegradation of 4-CP. Based on R2 value (0.9789), the Levenspiel's model was found to be best fit than others. The kinetic parameters; specific growth rate (µ), yield of cell mass (YX/S), and saturation constant (KS), were obtained as 0.6383 (h-1), 0.35 (g/g), and 0.006884 (g/L), respectively. The isolated strain has shown the ability of degrading 4-CP up to 1000 mg/L initial concentration within 40 h. Bacterial strain was immobilized via developing calcium alginate beads along by optimizing weight proportion of calcium chloride and sodium alginate and size of the bead for further experiments. Various process parameters i.e. initial feed concentration, bed height, rate of flow of were optimized during packed bed reactor (PBR) study. Maximum biodegradation efficiency of 4-CP was observed as 45.39% at initial concentration of 500 mg/L within 105 min, using 2 mm size of immobilized beads which were formed using 3.5% w/v of both calcium chloride and sodium alginate within. Thus, Bacillus subtilis (MF447841.1) could be used for biological remediation of 4-CP pollutant present in wastewater. Moreover, because of affordable and eco-friendly nature of water treatment, relatively it has the better scope of commercialization.

Disinfection by-products in drinking water: Occurrence, toxicity and abatement.

Disinfection means the killing of pathogenic organisms (e.g. bacteria and its spores, viruses, protozoa and their cysts, worms, and larvae) present in water to make it potable for other domestic works. The substances used in the disinfection of water are known as disinfectants. At municipal level, chlorine (Cl2), chloramines (NH2Cl, NHCl2), chlorine dioxide (ClO2), ozone (O3) and ultraviolet (UV) radiations, are the most commonly used disinfectants. Chlorination, because of its removal efficiency and cost effectiveness, has been widely used as method of disinfection of water. But, disinfection process may add several kinds of disinfection by-products (DBPs) (∼600-700 in numbers) in the treated water such as Trihalomethanes (THM), Haloacetic acids (HAA) etc. which are detrimental to the human beings in terms of cytotoxicity, mutagenicity, teratogenicity and carcinogenicity. In water, THMs and HAAs were observed in the range from 0.138 to 458 µg/L and 0.16-136 µg/L, respectively. Thus, several regulations have been specified by world authorities like WHO, USEPA and Bureau of Indian Standard to protect human health. Some techniques have also been developed to remove the DBPs as well as their precursors from the water. The popular techniques of DBPs removals are adsorption, advance oxidation process, coagulation, membrane based filtration, combined approaches etc. The efficiency of adsorption technique was found up to 90% for DBP removal from the water.