Nonlinear generation of a zero group velocity mode in an elastic plate by non-collinear mixing.

Zero Group Velocity (ZGV) modes are peculiar guided waves that can exist in elastic plates or cylinders, and have proved to be very sensitive tools in characterizing materials or thickness variations with sub-percent accuracy at space resolutions of about the plate thickness. In this article we show theoretically and experimentally how such a mode can be generated as the sum-frequency interaction of two high amplitude primary waves, and then serve as a local probe of material non-linearity. The solutions to the phase matching condition, i.e. condition for a constructive non-linear effect, are obtained numerically in the mark of classical, quadratic non-linearity. The coupling coefficients that measure the transfer rate of energy as a function of time from primary to secondary modes are derived. Experiments are conducted on an aluminum plate using piezo-electric transducers and a laser interferometer, and explore the interaction for incident symmetric and anti-symmetric fundamental Lamb modes. In an experiment operated without voltage amplifier we demonstrate that the resonant nature of these ZGV modes can be leveraged to accumulate energy from long excitations and produce detectable effects at extraordinarily low input power even in such weakly non-linear material.

Numerical parametric study of Nonlinear Coda Wave Interferometry sensitivity to microcrack size in a multiple scattering medium.

This paper reports a numerical study of the sensitivity and applicability of the Nonlinear Coda Wave Interferometry (NCWI) method in a heterogeneous material with a localized microcracked zone. We model the influence of a strong pump wave on the localized microcracked zone as a small average increase in the length of each crack. Further probing of this microcracked zone with a multiply scattered ultrasonic wave induces small changes to the coda-type signal, which are quantified with coda wave interferometry. A parametric sensitivity study of the CWI observables with respect to the changes in crack length is established via numerical simulations of the problem using a 2D spectral element method (SEM2D). The stretching of the signal, proportional to the relative variation in effective velocity, is found to be linearly proportional to the global change in crack length, while the other CWI parameter, the remnant decorrelation coefficient, is found to be quadratically proportional to the crack length change. The NCWI method is shown to be relevant for the detection of different damaged material states in complex solids. The reported numerical results are especially significant in the context of quantitative nondestructive evaluation of micro-damage level of a heterogeneous materials using nonlinear ultrasound signals.

Nonlinear Coda Wave Interferometry: Sensitivity to wave-induced material property changes analyzed via numerical simulations in 2D.

The numerical studies conducted in this paper are based on our previous research (Chen et al., 2017); through use of the spectral element method, parametric sensitivity studies of Nonlinear Coda Wave Interferometry (NCWI) are established here and divided into two parts. In the first part, CWI observables are found to be proportional to the product of the changes in elastic modulus within the Effective Damaged Zone (EDZ) and the EDZ surface area. The modifications to intrinsic properties are quantified via an overall wave velocity variation, as probed by a reverberated coda wave. However, for high-level changes, CWI may fail due to meaningless decorrelation values. In this context, parametric studies are conducted to yield a maximum range for EDZ contrast and area. To further validate these observations using a more realistic numerical model, instead of introducing a homogeneous EDZ model, the second part of this paper adds random cracks with random orientations into the EDZ of a material sample. The influence of a strong pump wave on localized nonlinear damage is reestablished; results show that the cracks added into the EDZ reduce the property changes required to match the previous experimental dataset.

A method for the measurement of dispersion curves of circumferential guided waves radiating from curved shells: experimental validation and application to a femoral neck mimicking phantom.

Our long-term goal is to develop an ultrasonic method to characterize the thickness, stiffness and porosity of the cortical shell of the femoral neck, which could enhance hip fracture risk prediction. To this purpose, we proposed to adapt a technique based on the measurement of guided waves. We previously evidenced the feasibility of measuring circumferential guided waves in a bone-mimicking phantom of a circular cross-section of even thickness. The goal of this study is to investigate the impact of the complex geometry of the femoral neck on the measurement of guided waves. Two phantoms of an elliptical cross-section and one phantom of a realistic cross-section were investigated. A 128-element array was used to record the inter-element response matrix of these waveguides. This experiment was simulated using a custom-made hybrid code. The response matrices were analyzed using a technique based on the physics of wave propagation. This method yields portions of dispersion curves of the waveguides which were compared to reference dispersion curves. For the elliptical phantoms, three portions of dispersion curves were determined with a good agreement between experiment, simulation and theory. The method was thus validated. The characteristic dimensions of the shell were found to influence the identification of the circumferential wave signals. The method was then applied to the signals backscattered by the superior half of constant thickness of the realistic phantom. A cut-off frequency and some portions of modes were measured, with a good agreement with the theoretical curves of a plate waveguide. We also observed that the method cannot be applied directly to the signals backscattered by the lower half of varying thicknesses of the phantom. The proposed approach could then be considered to evaluate the properties of the superior part of the femoral neck, which is known to be a clinically relevant site.

Measurement of dispersion curves of circumferential guided waves radiating from curved shells: Theory and numerical validation.

A method is proposed to evaluate in a non-contact way the phase velocity dispersion curves of circumferential waves around a shell of arbitrary shape immersed in a fluid. No assumptions are made about the thickness or the material of the shell. A geometrical model is derived to describe the shape of the radiated wavefronts in the surrounding fluid, and predict the positions of its centers of curvature. Then the time-reversal principle is applied to recover these positions and to calculate the phase velocity of the circumferential waves. Numerical finite-difference simulations are performed to evaluate the method on a circular and on an elliptic thin shell. Different dispersion curves can be recovered with an error of less than 10%.