RESUMO
The dc and ac flux density vs magnetic field B(H) loops of Epstein electrical strips are measured in an IEC type-A permeameter with a high-quality electrical strip wound double yokes of inside length l0 = 0.2 m and inside height h0 = 0.1 m and in a long solenoid. The relevant demagnetizing and eddy-current effects are analyzed, modeled, and discussed. It is concluded that demagnetizing corrected solenoid measurement developed for determining dc B(H) loops of the material cannot be used for the ac case, owing to complicated eddy-current demagnetizing effects. Permeameter-measured ac B(H) loops with H detected by a flat H-coil of length less than l0/2 touching the strip's middle surface may be considered representative of the actual material because H is very uniform along the strip within 3l0/4. Strips with ac B(H) loops thus determined should be used to calibrate the effective magnetic path length lm of Epstein measurements, where a very nonuniform field is applied to the strips.
RESUMO
The effective magnetic path length lm for a 25 cm Epstein frame test is studied on the basis of a relevant demagnetizing model and determined by a comparative measurement of dc and ac hysteresis loops at each value of peak flux density Bp, with the field recorded by H-coils placed above the mid-section of the limbs or calculated from the magnetizing current. The obtained Bp and frequency dependences of lm for testing core loss Ps and peak field Hp of an electrical steel are explained in terms of differential susceptibility along the measured loops and demagnetizing and eddy-current effects on local magnetization processes.
RESUMO
Magnetic iron oxide particles are widely used as contrast agents to improve the sensitivity of magnetic resonance imaging (MRI). Their efficiency in MRI is usually quantified by transverse relaxivity (r(2)) in solution. Herein, we synthesized a series of magnetite nanocrystal clusters (MNCs) with ultra-high transverse relaxivity by a polyol process and studied the relationship between r(2) and size of the MNCs. The sizes of MNCs can be tuned over a wide range from 13 to 179 nm. The r(2) of MNC suspensions as a function of the size of the cluster was analyzed and compared with a theoretical model. We found that MNCs of 64 nm had an r(2) value of 650 mM(-1) s(-1), which was more than three times that of the commercial contrast agent and was among the highest reported for iron oxide materials. Compared with the theoretical model, the r(2) value of the MNC suspension is approximately 0.93 of the theoretical prediction. Imaging of the MNC suspensions was performed in a clinical 1.5 T MRI instrument and a comparison was made between MNCs and commercial contrast agents. MRI indicated that the decrease of signal intensity induced by MNCs was in proportion to the r(2) value, which was in accordance with theoretical predictions. These results demonstrate that MNCs with ultra-high transverse relaxivity and tunable size are promising candidates for molecular imaging and clinical diagnosis in MRI.
