Molecularly imprinted electrochemical sensor, formed on Ag screen-printed electrodes, for the enantioselective recognition of d and l phenylalanine.

In this study, electrochemical sensors for the enantioselective recognition of d and l phenylalanine were prepared using a molecular imprinting technique in which the electro-polymerization of pyrrole was carried out by Chronopotentiometry(CP) with the target molecules being present on a Ag screen printed electrode's (SPE) surface. The sensing performance was evaluated by multi-potential steps at 0 and 2V(vs. Ag/AgCl) held for 1s and 2s, respectively, for 20 cycles (with the two enantiomers being present at the same concentration). The individual selectivity's for l and d- phenylalanine on their respective imprinted films were estimated to be L/D = 23.480 ± 2.844/1 and D/L = 19.134 ± 1.870/1 respectively, based on the current change between 0 and 2V (vs. Ag/AgCl) with the two enantiomers being present at the same concentration (10mM). Several parameters affecting recognition ability were investigated including: cross-selectivity of d and l- phenylalanine imprinted film, phenylalanine concentration effects, interfering species, deactivation and the storage life of electrode. The phenylalanine imprinted films were also characterized by AC impedance, chronoamperometry, Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscope(SEM), and Energy Dispersive X-Ray Spectroscopy (EDS). Finally, a recognition mechanism for the interaction of the polypyrrole film with its template under the influence of applied negative and positive potentials is proposed.

Copolymers Based on 1,3-Bis(carbazol-9-yl)benzene and Three 3,4-Ethylenedioxythiophene Derivatives as Potential Anodically Coloring Copolymers in High-Contrast Electrochromic Devices.

In this study, copolymers based on 1,3-bis(carbazol-9-yl)benzene (BCz) and three 3,4-ethylenedioxythiophene derivatives (3,4-ethylenedioxythiophene (EDOT), 3,4-(2,2-dimethylpropylenedioxy)thiophene (ProDOT-Me2), and 3,4-ethylenedithiathiophene (EDTT)) were electrochemically synthesized and their electrochemical and electrochromic properties were characterized. The anodic copolymer P(BCz-co-ProDOT) with BCz/ProDOT-Me2 = 1/1 feed molar ratio showed high optical contrast (ΔT%) and coloring efficiency (η), measured as 52.5% and 153.5 cm²âˆ™C-1 at 748 nm, respectively. Electrochromic devices (ECDs) based on P(BCz-co-EDOT), P(BCz-co-ProDOT), and P(BCz-co-EDTT) as anodic polymer layers, and poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as cathodic polymer layer were fabricated. P(BCz-co-ProDOT)/triple-layer PEDOT-PSS ECD showed three different colors (light yellow, yellowish-blue, and dark blue) at different applied potentials. In addition, the highest optical contrast (ΔT%) of P(BCz-co-ProDOT)/triple-layer PEDOT-PSS ECD was found to be 41% at 642 nm and the coloration efficiency was calculated to be 416.5 cm²âˆ™C-1 at 642 nm. All ECDs showed satisfactory optical memories and electrochemical cyclic stability.