DAC-less PAM4 signal generation using a silicon dual-drive push-pull MZI modulator.

In this study, we demonstrate DAC-less PAM-4 signal generation by driving a silicon MZI modulator based on a series push-pull configuration with two independent binary signals of varying amplitudes. Such configuration boosts transfer speed between PAM4 levels, leading to enhanced performance metrics compared to the differential driving scheme. Experimentally, our scheme demonstrated a lower bit-error rate compared to the differential scheme, proving its cost-efficiency and feasibility for PAM4 generation.

Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells.

Printable mesoscopic perovskite solar cells (p-MPSCs) do not require the added hole-transport layer needed in traditional p-n junctions but have also exhibited lower power conversion efficiencies of about 19%. We performed device simulation and carrier dynamics analysis to design a p-MPSC with mesoporous layers of semiconducting titanium dioxide, insulating zirconium dioxide, and conducting carbon infiltrated with perovskite that enabled three-dimensional injection of photoexcited electrons into titanium dioxide for collection at a transparent conductor layer. Holes underwent long-distance diffusion toward the carbon back electrode, and this carrier separation reduced recombination at the back contact. Nonradiative recombination at the bulk titanium dioxide/perovskite interface was reduced by ammonium phosphate modification. The resulting p-MPSCs achieved a power conversion efficiency of 22.2% and maintained 97% of their initial efficiency after 750 hours of maximum power point tracking at 55 ± 5°C.

Low-loss grating coupler with a subwavelength structure on a thin-film lithium niobate substrate.

We demonstrated a low-loss O-band grating coupler on an x-cut thin-film lithium niobate substrate by implementing subwavelength and apodized structures. The subwavelength gratings were used to mitigate the refractive index discontinuity between the input taper and grating region, which was the first application of such a structure for grating coupler optimization on a thin-film lithium niobate substrate. The coupling efficiency was measured to be -1.99 dB/coupler at a wavelength of 1312.8 nm, which was the lowest loss among the reported lithium niobate grating couplers that do not use metal mirrors. The proposed design does not require metal mirrors or any additional material layers and can be easily fabricated with a single-step lithography and etching processes.

Ultrahigh-linearity dual-drive scheme using a single silicon modulator.

Here, a high-linearity dual-drive scheme using a single silicon dual-drive Mach-Zehnder modulator is presented. The bias voltages and RF amplitudes of the two driving arms are adjusted such that the nonlinearity of the transfer function of the Mach-Zehnder interferometer cancels out the nonlinear response of the arms. Using the proposed scheme, the spurious-free dynamic range of the third-order intermodulation distortion is 123.4 dB Hz6/7, which is believed to be a record-breaking value for silicon modulators. In comparison, the result obtained using a conventional single-drive scheme is 102.6 dB·Hz2/3. The proposed scheme could simplify the design of modulators and promote high-performance microwave photonic links.