Granular hydrogels with tunable properties prepared from gum Arabic and protein microgels.

Granular hydrogels have emerged as a new class of materials for 3D printing, tissue engineering, and food applications due to their extrudability, porosity, and modularity. This work introduces a convenient method to prepare granular hydrogel with tunable properties by modulating the interaction between gum Arabic (GA) and whey protein isolate (WPI) microgels. As the concentration of GA increased, the appearance of the hydrogel changed from fluid liquid to moldable solid, and the microstructure changed from a macro-porous structure with thin walls to a dense structure formed by the accumulation of spherical particles. At a GA concentration of 0.5 %, the hydrogels remained fluid. Granular hydrogels containing 1.0 % GA showed mechanical properties similar to those of tofu (compressive strength: 10.8 ± 0.5 kPa, Young's modulus: 16.7 ± 0.4 kPa), while granular hydrogels containing 1.5 % GA showed mechanical properties similar to those of hawthorn sticks and sausages (compressive strength: 300.4 ± 5.8 kPa; Young's modulus: 200.5 ± 3.4 kPa). The hydrogel with 2.0 % GA was similar to hawthorn sticks, with satisfactory bite resistance and elasticity. Such tunability has led to various application potentials in the food industry to meet consumer demand for healthy, nutritious, and diverse textures.

Insights into the cycling stability of manganese-based zinc-ion batteries: from energy storage mechanisms to capacity fluctuation and optimization strategies.

Manganese-based materials are considered as one of the most promising cathodes in zinc-ion batteries (ZIBs) for large-scale energy storage applications owing to their cost-effectiveness, natural availability, low toxicity, multivalent states, high operation voltage, and satisfactory capacity. However, their intricate energy storage mechanisms coupled with unsatisfactory cycling stability hinder their commercial applications. Previous reviews have primarily focused on optimization strategies for achieving high capacity and fast reaction kinetics, while overlooking capacity fluctuation and lacking a systematic discussion on strategies to enhance the cycling stability of these materials. Thus, in this review, the energy storage mechanisms of manganese-based ZIBs with different structures are systematically elucidated and summarized. Next, the capacity fluctuation in manganese-based ZIBs, including capacity activation, degradation, and dynamic evolution in the whole cycle calendar are comprehensively analyzed. Finally, the constructive optimization strategies based on the reaction chemistry of one-electron and two-electron transfers for achieving durable cycling performance in manganese-based ZIBs are proposed.

Large scale and oxygen vacancy VO2 porous thin sheets to enable high-performance zinc ion storage.

Herein, we report the first result of large scale and oxygen vacancy VO2 porous thin sheets assembled by a 3D interconnected nanoflake array framework, which is recorded as VOd. The as-prepared VOd was characterized by various methods and Zn2+ intercalation/deintercalation and structural decomposition mechanisms were proposed based on ex situ X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).

Production and Physicochemical Characterization of the Gel Obtained in the Fermentation Process of Blue Corn Flour (Zea mays L.) with Colletotrichum gloeosporioides.

Food gels are viscoelastic substances used in various gelled products manufactured around the world. Polysaccharides are the most common food gelling agents. The aim of this work was the production and characterization of a gel produced in a blue corn flour fermentation process, where different proportions were used of blue corn (Zea mays L.) flour and Czapek Dox culture medium (90 mL of culture medium with 10 g of blue corn flour, 80 mL of culture medium with 20 g of blue corn flour, and 70 mL of culture medium with 30 g of blue corn flour) and were fermented for three different durations (20, 25, and 30 days) with the Colletotrichum gloeosporioides fungus. A characterization of the gel was carried out studying the rheological properties, proximal analysis, toxicological analysis, microscopic structure, and molecular characterization, in addition to a solubility test with three different organic solvents (ethanol, hexane, and ethyl acetate, in addition to water). The results obtained showed in the rheological analysis that the gel could have resistance to high temperatures and a reversible behavior. The gel is soluble in polar solvents (ethanol and water). The main chemical components of the gel are carbohydrates, especially polysaccharides, and it was confirmed by FT-IR spectroscopy that the gel may be composed of pectin.

Enzyme Immobilization by Inkjet Printing on Reagentless Biosensors for Electrochemical Phosphate Detection.

Enzyme-based biosensors commonly utilize the drop-casting method for their surface modification. However, the drawbacks of this technique, such as low reproducibility, coffee ring effects, and challenges in mass production, hinder its application. To overcome these limitations, we propose a novel surface functionalization strategy of enzyme crosslinking via inkjet printing for reagentless enzyme-based biosensors. This method includes printing three functional layers onto a screen-printed electrode: the enzyme layer, crosslinking layer, and protective layer. Nanomaterials and substrates are preloaded together during our inkjet printing. Inkjet-printed electrodes feature a uniform enzyme deposition, ensuring high reproducibility and superior electrochemical performance compared to traditional drop-casted ones. The resultant biosensors display high sensitivity, as well as a broad linear response in the physiological range of the serum phosphate. This enzyme crosslinking method has the potential to extend into various enzyme-based biosensors through altering functional layer components.

Crystal engineering of bimetallic cobalt-based metal-organic framework nanosheets for high-performance aqueous rechargeable cobalt-zinc batteries.

Aqueous rechargeable Zn-based batteries (ARZBs) have attracted increasing attention as favorable candidates for energy storage systems due to their high security, environmental friendliness, and abundance of electrode materials. At present, the most widely reported materials used in cobalt-zinc (Co-Zn) batteries are cobalt-based oxides and their derivatives, however, they still exhibit low actual capacities and unsatisfactory cycle lives. Metal-organic frameworks (MOFs), as a new class of porous materials with high specific surface area and adjustable pore size, have attracted considerable attention in the field of energy storage. Currently, pristine MOFs have currently few applications in Co-Zn batteries, and their performance is not ideal. Herein, we report a series of two-dimensional (2D) bimetallic CoM-MOF (M = Ni, Mn, Mg and Cu) nanosheets based on trimesic acid (H3BTC) ligand as cathodes for alkaline Co-Zn batteries via a simple one-pot hydrothermal synthesis. Among the synthesized MOFs, the CoNi-MOF nanosheets have the best performance, exhibiting a high reversible capacity of 344 mA h g-1 and demonstrating a good cycling life with 90 % capacity retention at 20 A g-1 after 1500 cycles. The energy storage mechanism is studied through a series of ex-situ characterizations. This study is of great importance in advancing the application of 2D pristine MOFs for high-performance Co-Zn batteries.

Validation of the IMPEDE VTE score for prediction of venous thromboembolism in Chinese patients with multiple myeloma: A single-center retrospective cohort study.

Multiple myeloma (MM) significantly increases the risk of venous thromboembolism (VTE) within 6 months of treatment initiation. The IMPEDE VTE score is a VTE risk prediction model which is recently incorporated into the National Comprehensive Cancer Network (NCCN) guidelines, but it lacks validation among Asians, including Chinese MM patients. We performed a retrospective chart review of 405 Chinese with newly diagnosed MM who started therapy at Beijing Jishuitan Hospital between April 2013 to October 2022. The 6-month cumulative incidence of VTE was 3.8 % (95 % CI:1.6-7.6), 8.6 % (95 % CI: 5.3-21.9) and 40.5 % (95 % CI: 24.9-55.7) in the low-, intermediate- and high-risk groups (P < 0.001), respectively. The C-statistic of the IMPEDE VTE scores for predicting VTE within 6 months of treatment initiation was 0.74 (95 % CI: 0.65-0.83). Of note, in this single-center cohort study, we propose that the anticoagulant LMWH may be more effective than the antiplatelet aspirin in potentially preventing VTE in newly diagnosed MM patients. Our findings suggest that the IMPEDE VTE score is a valid evidence-based risk stratification tool in Chinese patients with newly diagnosed MM.

A biomarker panel of secondary hypertension is simultaneously quantified by coupling of magnetic solid-phase extraction and liquid chromatography-tandem mass spectrometry.

RATIONALE: Secondary hypertension is often caused by activation of complex multi-organ endocrine systems, while renin activity indicated by angiotensins (Angs), aldosterone (ALD) and cortisol (COR) in such systems are generally accepted as its diagnostic markers. As antibody-based methods cannot offer comparable quantification for these biomarkers, a liquid chromatography (LC)-tandem mass spectrometry (MS/MS)-based approach was developed to quantify them simultaneously and accurately. METHODS: Five different beads for magnetic solid-phase extraction (MSPE) were evaluated towards their enrichment efficiency for these biomarkers. An LC system with optimized elution gradient and a triple-quadrupole MS with tuned parameters were coupled to quantitatively monitor the extracted analytes. The method performance was further examined such as linearity, precision, stability, recovery rate and matrix effect. Based on the developed method, the abundance of Ang II, ALD and COR in plasma was measured and the quantification was compared with that derived from commercial ELISA kits. RESULTS: As compared with other MSPEs, Angs, ALD and COR were highly enriched by the HLB magnetic beads with satisfactory recoveries. These analytes were simultaneously quantified by LC/MS/MS and all the method parameters for quantification were well matched with the requirements of clinical testing. Comparison of the quantitative results derived from ELISA and LC/MS/MS exhibited that the two methods offered basically comparable values with Pearson r values at 0.896, 0.895 and 0.835, respectively. The stability test for plasma Angs at room temperature indicated that the abundance of Ang II was relatively stable within 3 h, whereas that of Ang I and Ang 1-7 was time-dependently changed. CONCLUSIONS: Coupling of HLB beads and LC/MS/MS thus enables simultaneous quantification of a set of biomarkers related to secondary hypertension.

Bilayered nanostructured V2O5 nH2O xerogel constructed 2D nano-papers for efficient aqueous zinc/magnesium ion storage.

Aqueous zinc ion batteries (AZIBs) and aqueous magnesium ion batteries (AMIBs) offer powerful alternatives for large-scale energy storage because of their high safety and low cost. Consequently, the design of high-performance cathode materials is essential. In this paper, we present a simple strategy that combines oxygen defect (Od) engineering with a 2D-on-2D homogeneous nanopape-like bilayer V2O5 nH2O xerogel (BL-HVOd NPS). This strategy employs Od to improve Zn2+/Mg2+insertion/extraction kinetics and reduce irreversible processes for high-performance AZIBs/AMIBs. And interlayer water molecules serve as an effective spacer to stabilize the expanded interlayer gap in BL-HVOd NPS, thereby providing extended diffusion channels for Zn2+/Mg2+ during insertion/extraction. The interlayer water molecules help shield the electrostatic interaction between Zn2+/Mg2+ and BL-HVOd NPS lattice, which improves diffusion kinetics during repeated. In addition, electrochemical characterization results indicate that the BL-HVOd NPS can effectively the surface adsorption and internal diffusion of Zn2+/Mg2+. More importantly, the successfully prepared unique 2D-on-2D homogenous nanopaper structure enhances electrolyte/electrode contact and reduces the migration/diffusion path of electrons/Zn2+ and Mg2+, thus greatly improving rate performance. As a result, the BL-HVOd NPS as AZIBs/AMIBs electrodes offer better reversible capacity of 361.8 and 162.8 mA h g-1 (at 0.2 A g-1), while displaying impressively long cycle lifes. This method provides a way to prepare advanced xerogel cathode materials for AZIBs and AMIBs.

Emerging Doped Metal-Organic Frameworks: Recent Progress in Synthesis, Applications, and First-Principles Calculations.

Metal-organic frameworks (MOFs) are crystalline porous materials with a long-range ordered structure and excellent specific surface area and have found a wide range of applications in diverse fields, such as catalysis, energy storage, sensing, and biomedicine. However, their poor electrical conductivity and chemical stability, low capacity, and weak adhesion to substrates have greatly limited their performance. Doping has emerged as a unique strategy to mitigate the issues. In this review, the concept, classification, and characterization methods of doped MOFs are first introduced, and recent progress in the synthesis and applications of doped MOFs, as well as the rapid advancements and applications of first-principles calculations based on the density functional theory (DFT) in unraveling the mechanistic origin of the enhanced performance are summarized. Finally, a perspective is included to highlight the key challenges in doping MOF materials and an outlook is provided on future research directions.

Environmental carrying capacity and ecological risk assessment of pesticides under different soil use types in the Central Plains Urban Agglomeration (CPUA), China.

Soil environmental safety has received much attention during the past few decades due to its significance in agricultural production and human health. Special attention is required for soil pesticide residues and ecological risks. This study examined 197 soil samples from industrial, residential and agricultural areas for the presence of 12 organophosphorus pesticides (OPPs) and 8 synthetic pyrethroids (SYPs) in the 16 cities in Henan Province, and the center of CPUA, based on the Central Plains Urban Agglomeration (CPUA) concept proposed by China. The total average concentrations of ∑12OPPs in industrial, residential and agricultural soils were 194, 217, 267 ng/g dry weight, and those of ∑8SYPs were 26.8, 35.7, 25.5 ng/g dry weight, respectively. The two pollutants with the greatest concentrations in the soils were malathion and fenpropathrin, respectively, the dominant components of OPPs and SYPs. The soil environmental carrying capacity (SECC) analysis, representing the maximum residual load that can be supported, shows that acephate and cyhalothrin were overloaded, with a predicted period of over 500 years. Among the 16 cities of CPUA, a higher frequency of high ecological risk could be observed only in Shangqiu. The OPPs in children had total non-carcinogenic risk values of more than 1.0. Similarly, the non-carcinogenic risks of SYPs in adults and children in the residential areas were more than 1.0. The study provides knowledge on how to effectively manage soil safety in Henan Province, which is the center of the CPUA, with a large population and grain province to protect ecosystems and reduce the risks of soil pesticide residues in humans.

Seasonal variations of airborne microbial diversity in waste transfer stations and preventive effect on Streptococcus pneumoniae induced pulmonary inflammation.

Environment, location, and season are important factors that influence the microbiological community, yet, little research on airborne microorganisms in waste transfer stations (WTSs). Here, the airborne bacterial and fungal communities at four WTSs during different seasons were analyzed by high-throughput sequencing. The bacteria were isolated by cultural method and screened bacterium alleviate inflammation induced by Streptococcus pneumoniae (Spn) by regulating gut microbiome. The results revealed that collected bioaerosols from the WTSs varied significantly by location and season. Proteobacteria and Pseudomonadota are prevalent in summer and winter, respectively. Ascomycota was predominant in two seasons. Hazard quotients for adults from four WTSs were below one. Three selected potential probiotics were formulated into a microbial preparation with a carrier that effectively prevented inflammation in bacterial and animal experiments. The expression levels of interleukin-1ß, interleukin-6, and tumor necrosis factor-α in Pre group (0.11, 0.17, and 0.48-fold) were significantly lower than Spn group (2.75, 1.71, and 5.01-fold). These mechanisms are associated with changes in gut microbiota composition and short-chain fatty acids (SCFAs) levels, such as affecting Lachnospiraceae lachnospira abundance and acetic acid content. This study provides insights into the potential application of probiotics derived from WTSs as an alternative approach to preventing respiratory infections.

Comparison of three digestion methods for microplastic extraction from aquaculture feeds.

Microplastics (MPs) are ubiquitous pollutants found in aquaculture animals that may threaten human health through the food chain. However, there is a lack of effective methods for extracting MPs from aquaculture feeds containing complex components such as organic matter and fish bones. Therefore, in the present study, the extraction efficiency of three digestion methods using 30 % H2O2, Fenton reagent, and 30 % H2O2 + HNO3 for different particle sizes and types of MPs in aquaculture feeds was investigated and compared. The total digestion efficiency of the aquaculture feeds by 30 % H2O2 was 97.3 ± 0.1 %, while the recovery efficiency of MPs was 91.3 ± 1.1 % -103.1 ± 0.9 %. However, there was a large deviation in the extraction efficiency of MPs from aquaculture feeds by the Fenton reagent and 30 % H2O2 + HNO3. Notably, the surface morphology, particle size distribution, and oxidation degree of MPs hardly changed after 30 % H2O2 digestion. More importantly, the changes in the spectral features and carbonyl index of MPs after 30 % H2O2 digestion were smaller than those of the Fenton reagent and 30 % H2O2 + HNO3, which did not affect the identification of MPs. Overall, 30 % H2O2 was more efficient in extracting MPs from aquaculture feeds, and no significant effect on the characteristics of MPs was observed. This work provides novel insights into the effect of chemical pretreatment on the extraction of MPs in aquaculture feeds and provides an optimal protocol for the detection of MPs in aquaculture feeds.

Cobalt ion doping and morphology tailoring enable superior zinc-ion storage in sodium vanadate nanoflowers.

Layered sodium vanadium materials have aroused increasing interest owing to their open layered structures and high theoretical capacity. Nevertheless, the strong electrostatic interactions between vanadium oxide layers and intercalated Zn2+ and the weak electronic conductivity severely limit their further development. Here, we design a series of cobalt ion-doped sodium vanadium electrode materials with nanoflower-like morphologies. Due to the open interlayer space and improved electron transfer enabled by cobalt ion preintercalation and sufficient contact area between the electrode and electrolyte provided by the three-dimensional (3D) flower-like morphology, the cobalt ion-doped sodium vanadate (CNVO-2) cathode exhibits excellent electrochemical performance, including an exceptional specific capacity (411 mA h g-1 at 0.5 A g-1) and ultrahigh structural stability (90.4 % capacity retention after 3000 cycles at 10 A g-1), outperforming many advanced ZIBs cathode materials. In addition, through various ex situ characterization techniques, an ionic exchange and multiple ion cointercalation mechanism is first revealed in sodium vanadate cathode material.

Consumer Perception and Sensory Drivers of Liking of Fortified Oat Milks.

Oat milk was fortified with ß-glucan at a level that attains health benefits and protein at a level equivalent to that of cow's milk. This study aimed to identify consumer perceptions and evaluate the sensory attributes of fortified plain and chocolate oat milks. Oat milk consumers (n = 106) evaluated four samples: C (Control), 0Pro (6.25 g/L ß-glucan), LPro (6.25 g/L ß-glucan and 15.23 g/L oat protein), and HPro (6.25 g/L ß-glucan and 30.45 g/L oat protein); and they completed free-word association (FWA), liking ratings, just-about-right (JAR), check-all-that-apply (CATA), and conjoint analysis (CA). Oat milk was associated with sensory descriptors, environmental sustainability, and health benefits. C and 0Pro products were liked significantly more than LPro and HPro. C and 0Pro oat flavors and thicknesses were rated "just about right" by majority of the participants, while LPro and HPro were rated "too much". Positive CATA attributes were "smooth", "fresh", and "oat-like" while negative attributes were "rancid", "sandy", and "grainy". The CA results showed consumer interest in oat milk fortified with oat protein, containing ß-glucan at a level recommended for health benefits, and with protein levels higher than cow's milk. Based on the results, ß-glucan-fortified oat milk is acceptable while oat protein fortification requires reformulation or substitution with another source.

Impaired immunosuppressive effect of bone marrow mesenchymal stem cell-derived exosomes on T cells in aplastic anemia.

BACKGROUND: Previous studies have verified the dysfunction of mesenchymal stem cells (MSCs) for immunoregulation in acquired aplastic anemia (AA) patients. Exosomes derived from MSCs can partially substitute MSCs acting as immune regulator. Dysfunction of exosomes (Exos) derived from AA-MSC (AA-Exos) may play a key role in immunologic dissonance. METHOD: In this study, CD3 + T cells were collected and cocultured with AA-Exos and exosomes derived from HD-MSC (HD-Exos). The proliferation, differentiation and activation of CD3 + T cells were detected to compare the immunosuppressive effects between AA-Exos and HD-Exos. An immune-mediated murine model of AA was structured to compare the therapeutic effect of AA-Exos and HD-Exos. Furthermore, total RNA including miRNA from exosomes we purified and total RNA of CD3 + T cells were extracted for RNA-seq in order to construct the miRNA-mRNA network for interactions and functional analysis. RESULTS: AA-Exos had impaired inhibition effects on CD3 + T cells in terms of cell proliferation, activation and differentiation compared with exosomes from HD-Exos. HD-Exos showed a more effective rescue of AA mice compared to AA-Exos. Importantly, we found some differentially expressed miRNA involved in immune response, such as miR-199, miR-128 and miR-486. The Gene Ontology analysis of differentially expressed genes (DEGs) revealed involvement of various cellular processes, such as lymphocyte chemotaxis, lymphocyte migration and response to interferon-gamma. The Kyoto Encyclopedia of Genes and Genomes analysis illustrated upregulation of critical pathways associated with T cell function after coculturing with AA-Exos compared with HD-Exos, such as graft-versus-host disease, Th17 cell differentiation and JAK-STAT signaling pathway. A miRNA-mRNA network was established to visualize the interaction between them. CONCLUSION: In summary, AA-Exos had impaired immunosuppressive effect on T cells, less ability to rescue AA mice and differently expressed miRNA profile, which might partly account for the pathogenesis of AA as well as provide a new target of AA treatment.

A dual-cycle amplification-based electrochemical platform for sensitive detection of tobramycin.

BACKGROUND: Tobramycin (TOB), an essential aminoglycoside antibiotic in human life, poses potential threats due to its residues in the environment. The primary concern is the adverse impact of excessive TOB on human kidneys, hearing, and other organs, significantly affecting human health. Constructing a sensitive electrochemical platform for simple and rapid trace detection is crucial. Herein, to enhance the sensitivity of TOB detection in the environment and mitigate the risks associated with residual antibiotics, an ultrasensitive electrochemical aptasensor was developed. RESULTS: The sensor employs a dual-cycle amplification strategy involving catalytic hairpin assembly (CHA) and exonuclease III (Exo III) for efficient signal amplification. Simultaneously, the electrode performance was optimized by incorporating gold nanowires (AuNWs) onto the surface of reduced graphene oxide (PDA-rGO). Specifically, in the presence of TOB, which binds to the aptamer (Apt), dsDNA dissociates, releasing cDNA to open hairpin 1 (HP1) and initiate the CHA cycle with the participation of hairpin 2 (HP2). Exo III shears HP1 in the HP1/HP2 complex, freeing HP2 to participate in the CHA cycle again. Ultimately, a significant amount of signal label is retained on the electrode by hybridizing with sheared HP1, generating a robust electrical signal. SIGNIFICANCE: Through the signal amplification strategy, the aptasensor design provides a broad linear range of 0.005-500 nM, with a low detection limit of 0.112 pM for TOB. It is worth mentioning that the aptasensor displayed favorable stability, specificity, and reproducibility, and has been successfully applied to practical samples, demonstrating its utility in practical applications.

Biodegradable Pea Protein Fibril Hydrogel-Based Quasi-Solid-State Zn-Ion Battery.

Zinc-ion batteries show great potential as the next-generation power source due to their nontoxic, low-cost, and safe properties. However, issues with zinc anodes, such as dendrite growth and parasitic hydrogen evolution reactions (HERs), must be addressed to commercialize them. Solutions, such as quasi-solid-state electrolytes made from synthetic polymer hydrogels, have been proposed to improve battery flexibility and energy density. However, most polymers used are nonbiodegradable, posing a challenge to sustainability. In this study, hydrogels made from biodegradable poly(vinyl alcohol) and protein nanofibrils from pea protein, a renewable plant-based source, are used as an electrolyte in aqueous zinc-ion batteries. Results show that the flexible and biodegradable hydrogel can enhance the zinc anode stability and effectively restrict HER. This phenomenon is because of the hydrogen-bond network between nanofibril functional groups and water molecules. In addition, the interaction between functional groups on nanofibrils and Zn2+ constructs ion channels for the even migration of Zn2+, avoiding dendrite growth. The Zn||Zn symmetric cell using the hydrogel electrolyte exhibits a long lifespan of over 3000 h and improved capacity retention in the Zn||AC-I2 hybrid ion batteries by suppressing cathode material dissolution. This study suggests the potential of biodegradable hydrogels as a sustainable and effective solution for biodegradable soft powering sources.

Exploring Microeukaryote Community Characteristics and Niche Differentiation in Arid Farmland Soil at the Northeastern Edge of the Tibetan Plateau.

The northeastern edge of the Tibetan Plateau exhibits diverse climate and landform variations, and has experienced substantial recent environmental changes, which may significantly impact local agricultural practices. Understanding the microeukaryote community structure within agricultural soils is crucial for finding out the biological responses to such changes and may guide future agricultural practices. In this study, we employed high-throughput amplicon sequencing to examine 29 agricultural soil samples from seven research areas around the northeastern edge of the Tibetan Plateau. The findings revealed that the predominant biological communities in these soils were characterized by a high abundance of Alveolata, Amoebozoa, and Rhizaria. Ascomycota displayed the highest relative abundance among fungal communities. Moreover, notable distinctions in microeukaryote community composition were observed among the study sites. Co-occurrence network analysis highlighted interactions between the biological communities. Furthermore, our results elucidated that deterministic and stochastic processes exerted diverse influences on the distribution of protozoan and fungal communities. This study provides valuable insight into the microeukaryote structure in the agricultural soils of the northeastern edge of the Tibetan Plateau, shedding light on the intricate relationships between environmental factors, microeukaryote communities, and agricultural productivity.

Enhanced stabilization of oil-in-water (O/W) emulsions by fibrillar gel particles from lentil proteins.

Pulse proteins as a sustainable protein source have attracted increasing interest in food development, but pulse proteins are generally less surface active than dairy proteins. This work introduces lentil protein (LP)-based fibrillar gel particles (FGPs) fabricated from heat-induced LP fibrillar aggregates by 1, 4, 8, and 16 h of heating, followed by particle reduction using sonication. The heating time significantly impacts the FGPs particle size and surface hydrophobicity. The FGP prepared by 4 h of heating (FGP-4) showed a small size (<200 nm) and homogeneous size distribution while possessing significantly increased surface hydrophobicity compared to untreated LP. Such structural features made FGP-4 better adsorb at the O/W interface and then completely covered the oil droplet surface, leading to homogeneous emulsions of small size (22.33 µm) and superior long-term stability without creaming for 30 days. In addition, the dispersed FGP in the bulk phase could develop interactions among each other, leading to improved emulsion viscosity and texture without oil droplet size change. This finding suggests that constructing fibril-type gel particles can provide a new strategy for forming superior O/W emulsions with improved stability from plant proteins.