Salt-Responsive Phenol Formaldehyde Resin: Changes of Interface Energy on the Aggregation Process.

Phenol formaldehyde resins (PFRs) as a colloidal oil displacement agent were commonly used to plug pores in crude oil reservoirs for enhanced oil recovery (EOR). The aggregation-dispersion and charging behavior of PFR may affect the rheology and plugging performance of the suspension. To understand the aggregation-dispersion and charge of PFR, turbidity, dynamic light scattering, and electrophoretic light scattering experiments were carried out at pH = 10 with different concentrations of salt solutions (NaCl, MgCl2, CaCl2, NaCl/MgCl2, and NaCl/CaCl2). The aggregation rate and ζ-potential were measured, and the critical coagulation concentration (CCC) and critical coagulation ionic strength (CCIS) were further obtained. Based on the triple-layer surface complexation (TL) model, the adsorption ability of cations and the surface characteristics of the PFR particles were studied, and these differences were explained by interface energy. Thus, Derjaguin-Landau and Verwey-Overbeek (DLVO) theory modified by interface energy was applied to explain the aggregation behavior of PFR particles in different types of ion systems. We concluded that, in the presence of multiple ions, DLVO theory modified by interface energy has good applicability to the aggregation-dispersion of PFR particles.

Constructing and optimizing hollow ZnxFe3-xO4@polyaniline composites as high-performance microwave absorbers.

In this study, a series of hollow ZnxFe3-xO4@polyaniline composites (ZFO@PANI) were synthesized by a facile solvothermal process and followed by in-situ chemical oxidation polymerization method, and then evaluated as microwave absorption (MA) absorbers. The effect of ZFO content on the electrical conductivity, electromagnetic parameters and MA performance of the ZFO@PANI composites was also elaborately investigated. As anticipated, the optimized composites of S2 exhibits the minimum reflection loss (RLmin) of -59.44 dB at 11.04 GHz with a matching thickness of 2.31 mm, and the broadest effective absorption bandwidth (EAB, RL < -10 dB, >90% absorption) of up to 4.65 GHz (13.35-18.0 GHz) at 1.72 mm. Noticeably, by adjusting the thickness from 1.5 to 5.0 mm, it can be observed that its RLmin values are all much lower than -10 dB and the qualified EAB can cover the entire C, X and Ku bands. The enhanced MA performance of S2 is mainly due to the efficient synergistic effect between dielectric loss (PANI) and magnetic loss (ZFO nanosphere), and thus achieving the relative balance of impedance matching (appropriate ZFO content) and attenuation capability. Therefore, it has great prospect to be explored as attractive candidate in practical application.

Facile fabrication of sepiolite functionalized composites with tunable dielectric properties and their superior microwave absorption performance.

Although various materials have been studied for the purpose of microwave absorption (MA), natural sepiolite (SEP) has never been reported as MA absorber. Herein, the series of sepiolite@polyaniline composites (SEP@PANI-x) with "skeleton/skin" structure were fabricated through a facile in-situ polymerization technique and firstly developed as MA materials. The electrical conductivity and dielectric properties can be well controlled via modulating the PANI content in the composites. With a lower mass ratio of 30 wt%, it is worth noting that the optimized SEP@PANI-50 could simultaneously display the optimal minimum reflection loss (RLmin) of -50.23 dB and effective absorption bandwidth (EAB, RL < -10 dB) of 5.01 GHz with thicknesses of 2.5 and 1.8 mm, respectively. Moreover, when changing absorber thickness (1.5-5.0 mm), the RLmin values lower than -20 dB (99% absorption) are all achieved and the EAB ranges the entire Ku, X, and C bands. Such excellent MA performance comes from rich conductive network and polarization relaxation, which ultimately balance the impedance matching and attenuation ability. In view of its facile synthesis route, low-cost, lightweight and excellent MA performance, SEP@PANI-50 would be a very promising MA candidate in many practical applications. More importantly, we also think that our findings will expand the application of SEP-based composites in the electromagnetic field.

Polyaniline/chitosan as a corrosion inhibitor for mild steel in acidic medium.

The inhibition performance of polyaniline (PANI)/chitosan (CTS) on metal corrosion in 0.5 M HCl was studied using electrochemical measurements, quantum chemical calculations and morphological observations. Potentiodynamic polarization measurements show that PANI/CTS acts essentially as a mixed-type inhibitor. The inhibition efficiency increases and corrosion rates decrease with increasing concentrations of PANI/CTS. The relationship between experimental inhibition efficiency and quantum chemical calculations that were developed to describe the corrosion inhibition process are discussed.