Vibration analysis of a high-pressure multistage centrifugal pump.

High-pressure multistage centrifugal pumps have been widely used in modern industry and required low vibration and noise. In this study, modal analysis of the rotor system of a seven-stage centrifugal pump was carried out numerically by introducing fluid force to ensure that the centrifugal pump would not resonate. A vibration test bench was established to investigate the characteristics with flow rates of 0.8Qd, 1.0Qd, and 1.2Qd, and the vibration data of ten measuring points were collected. The period of the vibration at the bearing was found to be around 20 ms and the period was related to the shaft frequency (SF) and the blade passing frequency (BPF). The vibration of the pump casing was mainly determined by the SF, two times the SF, and two times the BPF. Mechanical motion is the main factor causing pump vibration, and fluid unstable motion is also an important cause.

Numerical Study on Entropy Generation of the Multi-Stage Centrifugal Pump.

The energy loss of the multi-stage centrifugal pump was investigated by numerical analysis using the entropy generation method with the RNG k-ε turbulence model. Entropy generation due to time-averaged motion and velocity fluctuation was mainly considered. It was found that the entropy generation of guide vanes and impellers account for 71.2% and 23.3% of the total entropy generation under the designed flow condition. The guide vanes are the main hydraulic loss domains and their entropy generation is about 9 W/K, followed by impellers. There are vortices at the tongue of the guide vane inlet as well as flow separations in the impellers, which lead to entropy generation. The fluid impacts the outer surface of the guide vanes, resulting in the increase in entropy generation. There are refluxes near the guide vane tongues which also increase the entropy generation of this part. The entropy generation distribution of the guide vanes and impellers was investigated, which found that the positive guide vane has more entropy generation compared with the reverse guide. The entropy generation of the blade suction surface is higher compared with the pressure surface. This study indicated that the entropy generation method has distinct advantages in the assessment of hydraulic loss.

Multi-objective optimization of the cavitation generation unit structure of an advanced rotational hydrodynamic cavitation reactor.

Hydrodynamic cavitation (HC) has been widely considered a promising technique for industrial-scale process intensifications. The effectiveness of HC is determined by the performance of hydrodynamic cavitation reactors (HCRs). The advanced rotational HCRs (ARHCRs) proposed recently have shown superior performance in various applications, while the research on the structural optimization is still absent. The present study, for the first time, identifies optimal structures of the cavitation generation units of a representative ARHCR by combining genetic algorithm (GA) and computational fluid dynamics, with the objectives of maximizing the total vapor volume, Vvapor , and minimizing the total torque of the rotor wall, M→z . Four important geometrical factors, namely, diameter (D), interaction distance (s), height (h), and inclination angle (θ), were specified as the design variables. Two high-performance fitness functions for Vvapor and M→z were established from a central composite design with 25 cases. After performing 10,001 simulations of GA, a Pareto front with 1630 non-dominated points was obtained. The results reveal that the values of s and θ of the Pareto front concentrated on their lower (i.e., 1.5 mm) and upper limits (i.e., 18.75°), respectively, while the values of D and h were scattered in their variation regions. In comparison to the original model, a representative global optimal point increased the Vvapor by 156% and decreased the M→z by 14%. The corresponding improved mechanism was revealed by analyzing the flow field. The findings of this work can strongly support the fundamental understanding, design, and application of ARHCRs for process intensifications.

Disinfection characteristics of an advanced rotational hydrodynamic cavitation reactor in pilot scale.

Hydrodynamic cavitation is a promising technique for water disinfection. In the present paper, the disinfection characteristics of an advanced hydrodynamic cavitation reactor (ARHCR) in pilot scale were studied. The effects of various flow rates (1.4-2.6 m3/h) and rotational speeds (2600-4200 rpm) on the removal of Escherichia coli (E. coli) were revealed and analyzed. The variation regularities of the log reduction and reaction rate constant at various cavitation numbers were established. A disinfection rate of 100% was achieved in only 4 min for 15 L of simulated effluent under 4200 rpm and 1.4 m3/h, with energy efficiency at 0.0499 kWh/L. A comprehensive comparison with previously introduced HCRs demonstrates the superior performance of the presented ARHCR system. The morphological changes in E. coli were studied by scanning electron microscopy. The results indicate that the ARHCR can lead to serious cleavage and surface damages to E. coli, which cannot be obtained by conventional HCRs. Finally, a possible damage mechanism of the ARHCR, including both the hydrodynamical and sonochemical effects, was proposed. The findings of the present study can provide strong support to the fundamental understanding and applications of ARHCRs for water disinfection.

Experimental and numerical studies on the cavitation in an advanced rotational hydrodynamic cavitation reactor for water treatment.

Hydrodynamic cavitation (HC) has emerged as one of the most potential technologies for industrial-scale water treatment. The advanced rotational hydrodynamic cavitation reactors (ARHCRs) that appeared recently have shown their high effectiveness and economical efficiency compared with conventional devices. For the interaction-type ARHCRs where cavitation is generated from the interaction between the cavitation generation units (CGUs) located on the rotor and the stator, their flow field, cavitation generation mechanism, and interaction process are still not well defined. The present study experimentally and numerically investigated the cavitation flow characteristics in a representative interaction-type ARHCR which has been proposed in the past. The cavitation generation mechanism and development process, which was categorized into "coinciding", "leaving", and "approaching" stages, were analyzed explicitly with experimental flow visualization and computational fluid dynamics (CFD) simulations. The changes in the cavitation pattern, area ratio, and sheet cavitation length showed high periodicity with a period of 0.5 ms/cycle at a rotational speed of 3,600 rpm in the flow visualization. The experimental and CFD results indicated that sheet cavitation can be generated on the downstream sides of both the moving and the static CGUs. The sheet cavitation was induced and continuously enlarged in the "leaving" and "approaching" stages and was crushed after the moving CGUs coincided with the static CGUs. In addition, vortex cavitation was formed in the vortex center of each CGU due to high-speed rotating fluid motion. The shape and size of the vortex cavitation were determined by the compression effect produced by the interaction. The findings of this work are important for the fundamental understanding, design, and application of the ARHCRs in water treatment.

A novel continuous hydrodynamic cavitation technology for the inactivation of pathogens in milk.

Hydrodynamic cavitation is a powerful tool for the enhancement of various processing applications. This study utilizes continuous hydrodynamic cavitation (CHC) for the inactivation of pathogens in milk for the first time. The thermal characteristics, inactivation performance, damage on the nutritional composition, product safety, and cost of the advanced rotational hydrodynamic cavitation reactor at pilot scale were comprehensively investigated. The inactivation results demonstrated that 5.89, 5.53, and 2.99 ± 0.08 log reductions of Escherichia coli, Staphylococcus aureus, and Bacillus cereus were achieved, respectively, at a final treatment temperature of 70 °C for 1-2 s. Moreover, the detrimental effect of CHC on the nutritional composition of milk, including mineral, fat, protein, and vitamin contents, was similar to that of high-temperature short-time method. The change in the concentrations of general bacteria and E. coli, as well as the pH value and acidity of the CHC treated milk stored at 5 °C for 14 days was found to be close to that of low-temperature long-time pasteurized milk. The cost of the present CHC treatment was $0.00268/L with a production rate of 4.2 L/min. CHC appears to be a remarkable method for the continuous processing of milk, as well as other liquid foods with high nutrition and "fresh-picked" flavor, due to its high efficacy, good scalability, high production capacity, and low operating and equipment costs.

Carbon Nanomaterials From Metal-Organic Frameworks: A New Material Horizon for CO2 Reduction.

The rise of CO2 in the atmosphere, which results in severe climate change and temperature increase, is known as the major reason for the greenhouse effect. Reducing CO2 to value-added products is an attractive solution to this severe problem, along with addressing the energy crisis, to which the catalysts being employed are of vital importance. Due to their high porosity and tunable compositions, metal-organic frameworks (MOFs) show great potential in energy conversion systems. By thermal or chemical treatment methods, the MOFs are easily turned into MOF-derived carbon nanomaterials. The much higher level of conductivity enables MOF-derived carbon nanomaterials to be employed in CO2 conversion processes. The present review, discusses the state of the art of MOF-derived carbon nanomaterials in CO2 electrochemical, photocatalytic, and thermal reduction applications. The corresponding reaction mechanisms and influence of various factors on catalyst performance are elaborated. Finally, the deficiencies and recommendations are provided for future progress.

A review on hydrodynamic cavitation disinfection: The current state of knowledge.

Disinfection, which aims to eliminate pathogenic microorganisms, is an essential step of water treatment. Hydrodynamic cavitation (HC) has emerged as a promising technology for large-scale disinfection without introducing new chemicals. HC, which can effectively induce sonochemistry by mechanical means, creates extraordinary conditions of pressures of ~1000 bar, local hotspots with ~5000 K, and high oxidation (hydroxyl radicals) in room environment. These conditions can produce highly destructive effects on microorganisms in water. In addition, the enhancements of chemical reactions and mass transfers by HC produce the synergism between HC and disinfectants or other physical treatment methods. HC is generated by hydrodynamic cavitation reactors (HCRs), therefore, their performance basically determines the effectiveness, economical efficiency, and applicability of HC disinfection. Therefore, developing high-performance HCRs and revealing the corresponding disinfection mechanisms are the most crucial issues today. In this review, we summarize the fundamental principles of HC and HCRs and recent development in HC disinfection. The energy release from cavitation phenomenon and corresponding mechanisms are elaborated. The performance (effectiveness, treatment ratio, and cost) of various HCRs, effects of treatment conditions on performance, and applicability of HC disinfection are evaluated and discussed. Finally, recommendations are provided for the future progress based on the analysis of previous studies.

Hydrodynamic Cavitation: A Promising Technology for Industrial-Scale Synthesis of Nanomaterials.

One of the most challenging issues for the large-scale application of nanomaterials, especially nanocarbons, is the lack of industrial synthetic methods. Sonochemistry, which creates an extreme condition of high pressure and temperature, has been thereby applied for synthesizing a wide variety of unusual nanostructured materials. Hydrodynamic cavitation (HC), characterized by high effectiveness, good scalability, and synergistic effect with other physical and chemical methods, has emerged as the promising sonochemistry technology for industrial-scale applications. Recently, it was reported that HC can not only significantly enhance the performance of biochar, but also preserve or improve the respective chemical composition. Moreover, the economic efficiency was found to be at least one order of magnitude higher than that of conventional methods. Due to the great potential of HC in the industrial-scale synthesis of nanomaterials, the present perspective focuses on the mechanism of sonochemistry, advances in HC applications, and development of hydrodynamic cavitation reactors, which is supposed to contribute to the fundamental understanding of this novel technology.

Novel boundary element method for resolving plate bending problems.

This paper discusses the application of the boundary contour method for resolving plate bending problems. The exploitation of the integrand divergence free property of the plate bending boundary integral equation based on the Kirchhoff hypothesis and a very useful application of Stokes' Theorem are presented to convert surface integrals on boundary elements to the computation of bending potential functions on the discretized boundary points, even for curved surface elements of arbitrary shape. Singularity and treatment of the discontinued corner point are not needed at all. The evaluation of the physics variant at internal points is also shown in this article. Numerical results are presented for some plate bending problems and compared against analytical and previous solutions.