Identification of the length and location of the A1 pulley combining palpation technique with palm landmarks: a cadaveric study.

Through anatomical morphology, to accumulate the relevant parameters of the A1 pulley of each adult finger. A total of 100 fingers were selected, dissected layer by layer, and the A1 pulley and neurovascular of each finger were observed. Measure the length of the A1 pulley, the distance between the needle knife insertion point and the proximal edge of A1 pulley, and the nerves and blood vessels on both sides. (1) The length of A1 pulleys of each finger is 6.18 ± 0.33 mm, 6.58 ± 0.73 mm, 5.98 ± 0.67 mm, 5.36 ± 1.08 mm, 5.63 ± 1.09 mm. (2) The distances between the needle knife entry point of each finger and the volar proper nerve of the ulnar finger are 7.00 ± 1.55 mm, 8.29 ± 1.46 mm, 5.10 ± 0.25 mm, 5.30 ± 0.24 mm, 0 mm; the distances from the volar proper nerve of the radial finger are 9.08 ± 0.87 mm, 4.70 ± 1.10 mm, 7.03 ± 0.72 mm, 6.81 ± 0.22 mm, 7.81 ± 0.57 mm. (3) The distances between the needle knife entry point of each finger and the proper volar artery of the ulnar finger are 10.40 ± 0.75 mm, 8.89 ± 0.53 mm, 6.35 ± 0.44 mm, 7.26 ± 0.16 mm, 0 mm, respectively; The distances from the volar proper artery of the radial finger are 8.75 ± 1.07 mm, 6.10 ± 0.35 mm, 11.44 ± 0.41 mm, 8.19 ± 0.60 mm, 9.78 ± 0.68 mm, respectively. The landmarks of the needle entry points are located at the position corresponding to the highest point of the metacarpal heads, except the tail finger. From the needle knife entry point to distal, cut the proximal edge of the A1 pulley longitudinally along the midline until the patient can flex autonomously, and pay attention to the distance between the two sides of 3.60-11.85 mm neurovascular bundle.

Effects of cervical rotatory manipulation on the cervical spinal cord complex with ossification of the posterior longitudinal ligament in the vertebral canal: A finite element study.

Background: There are few studies focusing on biomechanism of spinal cord injury according to the ossification of the posterior longitudinal ligament (OPLL) during cervical rotatory manipulation (CRM). This study aimed to explore the biomechanical effects of CRM on the spinal cord, dura matter and nerve roots with OPLL in the cervical vertebral canal. Methods: Three validated FE models of the craniocervical spine and spinal cord complex were constructed by adding mild, moderate, and severe OPLL to the healthy FE model, respectively. We simulated the static compression of the spinal cord by OPLL and the dynamic compression during CRM in the flexion position. The stress distribution of the spinal cord complex was investigated. Results: The cervical spinal cord experienced higher von Mises stress under static compression by the severe OPLL. A higher von Mises stress was observed on the spinal cord in the moderate and severe OPLL models during CRM. The dura matter and nerve roots had a higher von Mises stress in all three models during CRM. Conclusion: The results show a high risk in performing CRM in the flexion position on patients with OPLL, in that different occupying ratios in the vertebral canal due to OPLL could significantly increase the stress on the spinal cord complex.

Morphometric study of percutaneous A1 pulley of thumb release.

Through anatomy, microscope, histopathology, and simulating needle knife operation on specimens, to accumulate the relevant parameters of the A1 pulley of thumb, and to provide an anatomical evidence for the needle knife therapy of stenosing flexor tenosynovitis. A total of 20 fingers were selected from 20 intact adult upper limb specimens, a small amount of emerald green waterproof dye was injected from the needle insertion point, dissected layer by layer, and the A1 pulley and neurovascular bundle were observed. Observe the loosening of the thumb A1 pulley after 5 and 10 times of simulated needle knife cutting on the specimen; observe the relationship between the needle knife entry point and the A1 pulley under the thumb extension and abduction, and the thumb extension neutral position respectively; further observe the histological characteristics, and the relationship between needle entry point and A1 pulley by microscope. ① In general observation, the A1 pulleys of each finger were transverse fibers perpendicular to the flexor tendon, tough in texture, connected with synovial fibers at the proximal end. It is difficult to distinguish, and connected with oblique fibers at the distal end. ② The release rate of the thumb A1 pulley after 5 and 10 times of simulated needle knife cutting on the specimen were (40.46 ± 2.22)% and (63.52 ± 4.49)%, respectively. ③ In the neutral position of the thumb straightening, the needle entry point is 3.06 ± 0.14 mm from the proximal side of the proximal edge of the A1 pulley, which overlaps with the needle entry point where the thumb is straight and abducted. ④ Observed under a microscope, the A1 pulley is a dense transverse fiber with a pale yellow dense connective tissue, both ends are continuous with the synovial fibers. It is thin and translucent, and loose connective tissue. The A1 pulley is a dense transverse fiber with a pale yellow dense connective tissue. The anatomical key points of the needle knife therapy lie in the extended and abducted position of the thumb. Currently, it is believed that cutting the proximal edge of the A1 pulley is sufficient, and there is no need to cut the entire A1 pulley.

A study of 285 cases of cranial vault suture closure in Chinese adults.

PURPOSE: To examine the presence and characteristics of cranial vault suture closure in Chinese adults and to explore whether craniosacral therapy (CST) manipulation is rational from the anatomical perspective. METHODS: Anthropological non-metric observation and craniometry were used to study 285 dry skull specimens of Chinese adults. RESULTS: A total of 91 specimens with closed extracranial sutures were observed, with an occurrence rate of 31.93%. Based on the mode of closure, there were 32 cases of single type closure, with sagittal suture closure predominating with 20 cases (21.98%); 59 cases of composite closure, with a partial closure of coronal suture + sagittal suture + lambdoid suture predominating with 26 cases (28.57%). In terms of the degree of closure, there were 13 cases (14.28%) of sagittal suture grade 0 closure and 78 cases (85.72%) of grade 1 - 4 closure; 34 cases (37.36%) of coronal suture grade 0 closure and 57 cases (62.64%) of grade 1 - 4 closure; 47 cases (51.65%) of lambdoid suture grade 0 closure and 44 cases (48.35%) of grade 1 - 4 closure. The segment and degree of coronal suture closure (46, 80.7%) and lambdoid suture (31, 70.45%) were mostly left-right symmetrical. The bone surfaces on either side of the cranial vault sutures are embedded in each other, forming a rough, complex and interlocking bone-suture-bone structure. CONCLUSION: This study observed the closure of the cranial vault suture, summarized its characteristics, and explored the irrationality of the CST manipulation. The anatomical characteristics of the cranial suture dictate that manipulation cannot push the cranial suture at will.

Effects of cervical rotatory manipulation on the cervical spinal cord: a finite element study.

BACKGROUND: Little information is available concerning the biomechanism involved in the spinal cord injury after cervical rotatory manipulation (CRM). The primary purpose of this study was to explore the biomechanical and kinematic effects of CRM on a healthy spinal cord. METHODS: A finite element (FE) model of the basilaris cranii, C1-C7 vertebral bodies, nerve root complex and vertebral canal contents was constructed and validated against in vivo and in vitro published data. The FE model simulated CRM in the flexion, extension and neutral positions. The stress distribution, forma and relative position of the spinal cord were observed. RESULTS: Lower von Mises stress was observed on the spinal cord after CRM in the flexion position. The spinal cord in CRM in the flexion and neutral positions had a lower sagittal diameter and cross-sectional area. In addition, the spinal cord was anteriorly positioned after CRM in the flexion position, while the spinal cord was posteriorly positioned after CRM in the extension and neutral positions. CONCLUSION: CRM in the flexion position is less likely to injure the spinal cord, but caution is warranted when posterior vertebral osteophytes or disc herniations exist.

Qi-dan-di-huang decoction alleviates diabetic nephropathy by inhibiting the NF-kappaB pathway.

Diabetic nephropathy (DN) is one of the most serious complications of diabetes mellitus, for which no effective treatment currently exists. We tested the hypothesis that Qi-dan-di-huang (QDDH) might have therapuetic effects in an experimental rat model of DN. The levels of I kappa KinaseAlpha and Beta, p-p65, p-IκB alpha, TGF-ß1 and Alpha-SMA were significantly increased in kidneys in DN. QDDH decoction only partially reversed the increased Ikappa KinaseAlpha/Beta, p-p65, p-IKappaB alpha, TGF-Beta1 and alpha-SMA in the kidneys in DN. However, treatment of diabetic rats with QDDH decoction significantly inhibited the production and release of inflammatory cytokines IL-6, IL-1 beta and TNF-alpha into the serum. QDDH decoction also significantly improved the physiologic and biochemical indicators of DN, reduced glycogen and protein deposition in DN and prevented renal fibrosis. Together, the data show that QDDH decoction exerts a protective effect on kidneys in diabetic rats and reverses the inflammatory milieu of the serum in DN.