Blends of Carboxymethyl Cellulose and Cottonseed Protein as Biodegradable Films.

With the increasing awareness of plastic pollution in the environment and the accumulation of microplastics in water, a significant amount of research and development is ongoing to replace the synthetic plastics in packaging and coatings. In this work, we explored the blends of carboxymethyl cellulose (CMC) and washed cottonseed meal (CSM, consisting mostly of cottonseed protein) as agro-based, biodegradable, and sustainable alternatives to plastics. Glycerol was found to be a suitable plasticizer for these blends. The blends of CMC/CSM were produced as single-layer films from 50 to 90 µm in thickness, consisting of different proportions of the components and plasticizer. The evaluated properties included opacity, water vapor permeability, mechanical properties, thermogravimetric analysis, moisture sorption analysis, and water swelling test. Higher percentages of CSM in the blend resulted in higher opacity and lower water vapor permeation rates. The mechanical strength waned with lower levels of CMC. Possible applications for these blends include their use as water-soluble food packaging and coatings and as dissolvable bags and pouches for detergents and agrochemicals.

On the Unique Morphology and Elastic Properties of Multi-Jet Electrospun Cashew Gum-Based Fiber Mats.

This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high-molecular-weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is a low-cost, non-toxic heteropolysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution was needed to produce more stable and defect-free straight and smooth fibers. Additionally, the inclusion of glycerol as a plasticizer was required to overcome material fragility. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Furthermore, the resulting oriented fiber mats exhibited unexpectedly high elongation at break under ambient conditions. These findings underscore the potential of this bio-polysaccharide-based formulation for non-direct water contact applications that demand elastic properties.

An improved system to generate recombinant canine distemper virus.

BACKGROUND: Canine distemper virus (CDV) is a pathogen with the capability of cross-species transmission. It has crossed the species barrier to infect many other species, and its host range is expanding. The reverse genetic platform, a useful tool for scientific research, allows the generation of recombinant viruses from genomic cDNA clones in vitro. METHODS: To improve the reverse genetic system of CDV, a plasmid containing three independent expression cassettes was constructed for co-expression of the N, P, and L genes and then transfected with a full-length cDNA clone of CDV into Vero cells. RESULTS: The results indicated that the established rescue system has the advantages of being more convenient, easy to control the transfection ratio, and high rescue efficiency compared with the conventional reverse genetics system. CONCLUSION: This method not only reduces the number of transfection plasmids, but also improves the rescue efficiency of CDV, which could provide a reference for the recovery of other morbilliviruses.

NMR Analyses and Statistical Modeling of Biobased Polymer Microstructures-A Selected Review.

NMR analysis combined with statistical modeling offers a useful approach to investigate the microstructures of polymers. This article provides a selective review of the developments in both the NMR analysis of biobased polymers and the statistical models that can be used to characterize these materials. The information obtained from NMR and statistical models can provide insights into the microstructure and stereochemistry of appropriate biobased polymers and establish a systematic approach to their analysis. In suitable cases, the analysis can help optimize the synthetic procedures and facilitate the development of new or modified polymeric materials for various applications. Examples are given of the studies of poly(hydroxyalkanoates), poly(lactic acid), and selected polysaccharides, e.g., alginate, pectin, and chitosan. This article may serve as both a reference and a guide for future workers interested in the NMR sequence analysis of biobased materials.

Phenolic and flavonoid compounds from the fruit shell of Camellia oleifera.

A new phenolic compound oleiphenol (1), and a new dihydrochalcone oleifechalcone (2) along with seven known compounds (3-9) were isolated from the fruit shell of Camellia oleifera Abel. The planar structures of compounds 1 and 2 were determined on the basis of extensive spectroscopic analyses (IR, UV, NMR, and HR-ESI-MS) and comparison with literature data. The absolute configurations of the new structures were determined by ECD calculations and chemical methods. In addition, compounds 1-9 underwent a series of pharmacological activity tests, including cytotoxic, anti-inflammatory, anti-RSV and antioxidant activities.

Progress in PRRSV Infection and Adaptive Immune Response Mechanisms.

Since its discovery, Porcine reproductive and respiratory syndrome (PRRS) has had a huge impact on the farming industry. The virus that causes PRRS is Porcine Reproductive and Respiratory Syndrome Virus (PRRSV), and because of its genetic diversity and the complexity of the immune response, the eradication of PRRS has been a challenge. To provide scientific references for PRRSV control and vaccine development, this study describes the processes of PRRSV-induced infection and escape, as well as the host adaptive immune response to PRRSV. It also discusses the relationship between PRRSV and the adaptive immune response.

Two new pregnane glycosides from the root of Cynanchum auriculatum.

Two new pregnane glycosides (1 and 2), together with four known ones (3- 6), were isolated from the roots of Cynanchum auriculatum Royle ex Wight (Asclepiadaceae). On the basis of detailed spectroscopic analysis and chemical method, the structures of new compounds were characterized to be metaplexigenin 3-O-ß-D-cymaropyranosyl- (1→4)-α-L-diginopyranosyl-(1→4)-ß-D-cymaropyranoside (1), metaplexigenin 3-O-α-L-diginopyranosyl-(1→4)-ß-D-cymaropyranoside (2). All the isolated compounds (1-6) were tested for their in vitro inhibitory activity against the growth of human colon cancer cell lines HCT-116. Compounds 5 and 6 showed significant cytoxicities with IC50 values of 43.58 µM and 52.21 µM.

Bilayer Films of Poly(lactic acid) and Cottonseed Protein for Packaging Applications.

Poly(lactic acid) (PLA) is a common biobased film-former made from renewable biomass, such as polysaccharides from sugarcane, corn, or cassava. It has good physical properties but is relatively expensive when compared to the plastics used for food packaging. In this work, bilayer films were designed, incorporating a PLA layer and a layer of washed cottonseed meal (CSM), an inexpensive agro-based raw material from cotton manufacturing, where the main component is cottonseed protein. These bilayer films were made through the solvent casting method. The combined thickness of the PLA/CSM bilayer film was between 47 and 83 µm. The thickness of the PLA layer in this film was 10%, 30%, or 50% of the total bilayer film's thickness. Mechanical properties of the films, opacity, water vapor permeation, and thermal properties were evaluated. Since PLA and CSM are both agro-based, sustainable, and biodegradable, the bilayer film may be used as an eco-friendlier food packaging material, which helps reduce the environmental problems of plastic waste and microplastics. Moreover, the utilization of cottonseed meal may add value to this cotton byproduct and provide a potential economic benefit to cotton farmers.

Two new aryltetralin-type lignans from Camellia oleifera husk.

Two new aryltetralin-type lignans (1-2) were isolated from the dichloromethane fraction of 95% ethanol extract of Camellia oleifera fruit husk. Their structures were elucidated on the basis of spectroscopic analysis, and the absolute configurations of compounds 1-2 were determined by the comparison of measured ECD curves with the quantum chemical calculated ones. The new compounds were tested for their antioxidant activities and cytotoxicity against three human cancer cell lines (Huh-7, H460 and MCF-7). While compounds 1 and 2 only showed slight DPPH radical scavenging activities with the IC50 values of 38.68 ± 5.02 and 56.62 ± 1.49 µM, respectively.

Two new chemical constituents from the stem and branch of Tripterygium wilfordii.

A chemical investigation of 95% ethanol extract from the stem and branch of Tripterygium wilfordii has resulted in the isolation and characterization of two new compounds, one neolignan (1) and one phenylalanine derivative (2), as well as four known compounds (3-6). The structures of the new compounds were determined based on extensive spectroscopic analyses. The absolute configuration of compound 1 was defined by X-ray crystallographic analyses and electronic circular dichroism calculation. In addition, compounds 2 and 4-6 exhibited inhibitory effects against NO production in LPS-induced RAW 264.7 macrophages with the IC50 value ranging from 3.51 µM to 30.40 µM.

Initial Formulation of Novel Peanut Butter-like Products from Glandless Cottonseed.

Glandless (Gl) cottonseed is a unique cotton variety with only a trace content of toxic gossypol present. This new cottonseed raises the potential of its enhanced utilization as an agro-food for human consumption. In this work, Gl cottonseed kernels were used with additional cottonseed oil to produce novel peanut butter-like products. Kernels roasted at two temperatures (140 or 150 °C) for a given time (15 or 30 min) were first ground with different ratios of cottonseed oil and two other ingredients (i.e., salt and sugar) with a food blender, and then passed through a meat grinder with a 4-mm-hole grinding plate. Per the preliminary result, the butter-like products with Gl kernels roasted at 150 °C were subject to further structural and textural evaluation. The color of the two butter-like products was comparable to a commercial peanut butter, but the formers' textural properties were significantly different (p ≤ 0.05) from the latter. Morphologic examination by Scanning Electron Microscopy (SEM) and cryo-SEM revealed that the butter product with a longer (30 min) roasting time possessed a smoother surface than the products with a shorter (15 min) roasting time. Oil stability test showed no substantial oil separation (<3%) from the butter products over 7 weeks at ambient temperature (22 °C). This work provides the basic information and parameters for lab cottonseed butter making so that optimization and characterization of cottonseed butter formation can be designed and performed in future research.

Element variation in a clam shell and its implications for cold seep irregular eruptions: Calyptogena sp. in the Haima cold seep.

Cold seep is characterized by methane-rich fluids released from subsurface reservoirs, and it sustains the chemosynthetic ecosystems on the seafloor. Previous studies suggest that the activity of cold seep could affect the seawater chemistry and ambient temperature. However, the short-term seep activity was hardly reconstructed due to the focus of studies on carbonate or sediment. Vent macrofauna provide such an opportunity by recording in shells the immediate environment in which they grow. The carbonate skeleton of organisms could theoretically preserve environmental variation. Therefore, high-resolution archives are urgently required to understand the influence of cold seep activity on biogeochemistry. In this study, SEM, EDS mapping, EBSD mapping, and LA-ICP-MS analyses were conducted on a clam (Calyptogena sp.) shell collected alive in 2018 from the Haima cold seep in South China Sea. The CaCO3, Na, Mg, Sr, and Ba contents and the Sr/Ca, Ba/Ca, and Na/Ca ratios in the hinge plate were measured on LA-ICP-MS by spot analysis and line scanning. The element contents in the hinge are as follows: Mg (38.5-109 µg/g), Na (3117-5246 µg/g), Sr (970-5371 µg/g), and Ba (2.9-11.5 µg/g). The results show that Sr, Re, and Ba content vary synchronously along the direction of growth, but Na has an opposite trend. The element analyses indicate that the eruption of the Haima cold seep was irregular, causing temperature, redox state, and pH changes in the cold seep ecosystem. These findings show that the irregular cold seep activities exert vital influences on the biogeochemistry of the cold seep ecosystem, which shed a light on cold seep biomonitoring.

Molecular level characterization of the effect of roasting on the extractable components of glandless cottonseed by Fourier transform ion cyclotron resonance mass spectrometry.

Roasting is a technological process in some food applications of agricultural products. To investigate the composition changes of the extractable functional/bioactive components of cottonseed, in this work, glandless cottonseed kernels were roasted at 110, 120, 140 and 150 °C for 15 min, respectively. The UV/vis data of the 80 % ethanol extracts found that roasting increased the level of phenolic compounds. Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry of the extracts identified about 44 % to 55 % of total formulas as potential phenolic compounds. Roasting (up to 140 °C) mainly increased carbohydrate-, lignin-, and tannin-like compounds while lipid-like compounds decreased. The compositional changes at 150 °C were less than those at 140 °C, attributed to devolatilization at the higher temperature. The information of chemical profiling of cottonseed and the roasting impact would be greatly useful in enhanced utilization of cottonseed as nutrient and functional foods or food supplements.

Molecular biology of canine parainfluenza virus V protein and its potential applications in tumor immunotherapy.

Canine parainfluenza virus (CPIV) is a zoonotic virus that is widely distributed and is the main pathogen causing canine infectious respiratory disease (CIRD), also known as "kennel cough," in dogs. The CPIV-V protein is the only nonstructural protein of the virus and plays an important role in multiple stages of the virus life cycle by inhibiting apoptosis, altering the host cell cycle and interfering with the interferon response. In addition, studies have shown that the V protein has potential applications in the field of immunotherapy in oncolytic virus therapy or self-amplifying RNA vaccines. In this review, the biosynthesis, structural characteristics and functions of the CPIV-V protein are reviewed with an emphasis on how it facilitates viral immune escape and its potential applications in the field of immunotherapy. Therefore, this review provides a scientific basis for research into the CPIV-V protein and its potential applications.

Methods of Microencapsulation of Vegetable Oil: Principles, Stability and Applications - A Minireview.

In addition to being used in food, fuel and lubricants, vegetable oils are promising in many other applications such as food additives, nutritional supplements, cosmetics and biomedicine; however, their low oxidative stability can limit their use. Microencapsulation is a well-established method for the preservation of oil against degradation, controlled release of active ingredients, protection against external factors during storage, and enhanced durability. In this article, microencapsulation methods for vegetable oil are reviewed, including physical methods (spray-drying and freeze-drying), physicochemical methods (complex coacervation, ionic gelation and electrostatic layer-by-layer deposition), and chemical methods (interfacial/in situ polymerization). This article also provides information on the principles, parameters, advantages, disadvantages and applications of these methods.

Application of Lignin-Containing Cellulose Nanofibers and Cottonseed Protein Isolate for Improved Performance of Paper.

There is current interest in replacing petroleum-based additives in consumer paper products with abundantly available, renewable and sustainable biopolymers such as lignin-containing cellulose nanofibers (LCNFs) and cottonseed protein. This research characterized the performance of cottonseed protein isolate with/without LCNFs to increase the dry strength of filter paper. The application of 10% protein solution with 2% LCNFs as an additive improved the elongation at break, tensile strength and modulus of treated paper products compared to the improved performance of cottonseed protein alone. Improvements in tensile modulus and tensile strength were greatest for samples containing larger amounts of lignin and a greater degree of polymerization than for those with less lignin from the same biomass sources.

Undescribed abietane-type diterpenoids and oleanane-type triterpenoids from the stem and branch of Tripterygium wilfordii.

Six undescribed abietane-type diterpenoids (tripterydinoids A-F) and five undescribed oleanane-type triterpenoids (tripterytrinoids A-E) were obtained and determined from the stem and branch of Tripterygium wilfordii Hook. f. (Celastraceae). Tripterydinoids A-C possessed the abietane-type diterpenoid skeleton with rare 8, 9-epoxy ring. The structures of undescribed compounds were established by extensive spectroscopic studies [HRESIMS, 1D/2D-NMR and electronic circular dichroism (ECD) calculation]. The absolute configurations of tripterydinoids A, B, E and tripterytrinoid A were defined by X-ray crystallographic analyses. Bioactivity screening indicated that tripterydinoids A-C exhibited potent inhibitory effects against NO release in LPS-activated RAW 264.7 macrophages with IC50 values of 6.93, 4.46 and 2.98 µM, respectively. Meanwhile, tripterydinoids A-D and tripterytrinoids B, C showed moderate and selective cytotoxicities against five human tumor cell lines (A375, Huh7, MCF-7, HCT-116 and NCI-H460).

Diverse dihydroagarofuran sesquiterpene derivatives from the stem and branch of Tripterygium wilfordii.

Ten new dihydroagarofuran sesquiterpene polyol esters, tripterdines A-J (1-10) were isolated from the stem and branch of Tripterygium wilfordii. The structures of new compounds were elucidated on the basis of extensive spectroscopic analyses, including UV, IR, HRESIMS, NMR, and CD exciton chirality method. The structures of compounds 1, 3, and 6 were confirmed by X-ray crystallographic analyses. The anti-inflammatory and cytotoxic activities were assessed for all the compounds (1-10). Compounds 3, 5 and 10 exhibited potent anti-inflammatory activities with the secretion level of TNF-α ranging from 43.86% to 51.27%, and the IL-6 ranging from 32.44% to 50.64%. In addition, compounds 1, 3, 7 and 9 showed weak cytotoxicities against three human tumor cell lines (Huh7, MCF-7 and HCT-116).

B7-H3 is eligible for predicting clinical outcomes in lung adenocarcinoma patients treated with EGFR tyrosine kinase inhibitors.

BACKGROUND: Not all lung adenocarcinoma (LUAD) patients with activating epidermal growth factor receptor (EGFR) mutations respond to tyrosine kinase inhibitors (TKIs) as intended. Thus, biomarkers are needed to identify patients who benefit most from EGFR-targeted therapy. Our previous in vitro data has shown that the co-signal molecule B7-H3 determines EGFR-TKI gefitinib susceptibility of EGFR-mutated LUAD cell lines, based on the potential crosslinking between B7-H3-induced signaling and EGFR signaling. METHODS: We detected tumoral B7-H3 expression in the original biopsy from 56 treatment-naïve LUAD patients and analyzed the association between high/low B7-H3 expression with the clinical outcomes of first-line anti-EGFR therapy. The main criteria for the analysis of response were overall response rate (ORR), disease control rate (DCR), and progression-free survival (PFS), and the secondary criterion was overall survival (OS). RESULTS: In the subgroups of B7-H3 high and low expression, the ORR were 16.0% (4/25) and 74.2% (23/31) (p<0.001), and the DCR were 36.0% (9/25) and 87.1% (27/31) (p<0.001), respectively. The PFS of B7-H3 high [median 8.7, 95% confidence interval (CI) 4.0-13.4] was significantly worse than that of B7-H3 low (median not reached) [HR 6.54 (95% CI 2.18-19.60), p=0.001]. The median OS was 15.9 (95% CI 10.0-21.8) months in the B7-H3 high cohort and 25.7 (95% CI 9.0-42.4) months in the B7-H3 low subjects [HR 2.08 (95% CI 1.07-4.02), p=0.03], respectively. Both the univariate and multivariate analyses identified B7-H3 as an independent factor associated with poor PFS (p=0.001, p=0.000) and OS (p=0.03, p=0.015). CONCLUSION: B7-H3 may serve as a potential biomarker to predict clinical outcomes in EGFR-mutated LUAD patients treated with first-line EGFR-TKIs.