Kaempferol from Penthorum chinense Pursh suppresses HMGB1/TLR4/NF-κB signaling and NLRP3 inflammasome activation in acetaminophen-induced hepatotoxicity.

Acetaminophen (APAP) is one of the safest and most effective over-the-counter (OTC) analgesics and antipyretics, but excessive doses of APAP will induce hepatotoxicity with high morbidity and mortality worldwide. Kaempferol (KA), a flavonoid compound derived from the medicinal and edible plant of Penthorum chinense Pursh, has been reported to exert a profound anti-inflammatory and antioxidant activity. In this study, we explored the protective effect and novel mechanism of KA against APAP-induced hepatotoxicity. The results revealed that KA pretreatment significantly reduced the levels of aspartate aminotransferase (AST) and alanine aminotransferase (ALT), relieved hepatocellular damage and apoptosis, attenuated the exhaustion of glutathione (GSH) and accumulation of malondialdehyde (MDA), increased the expression of antioxidative enzymes (e.g., heme oxygenase 1 (HO-1) and NADPH quinone oxidoreductase 1 (NQO1)), and thus restrained APAP-induced oxidative damage in the liver. KA suppressed the expression of NLRP3 and reduced the levels of pro-inflammatory factors, including interleukin-1 beta (IL-1ß), tumor necrosis factor-alpha (TNF-α), and interleukin-6 (IL-6). Moreover, KA remarkably inhibited high-mobility group box 1 (HMGB1) and toll-like receptor 4 (TLR4) expression as well as nuclear factor kappa-B (NF-κB) activation for liver protection against APAP-induced inflammatory responses and apoptosis. Taken together, our findings suggested that KA could effectively protect hepatocytes from APAP hepatotoxicity through the up-regulation of HO-1 and NQO1 expression, the down-regulation of NLRP3 expression, and the inhibition of the HMGB1/TLR4/NF-κB signaling pathway.

[The Concentration Effect of Near-Infrared Quantum Cutting Luminescence of Tm(3+) Ion Sensitized with Bi(3+) Ion in YNbO(4) Phosphor].

Searching for new energy source is one of the most important projects faced by the global, while the most ideal new energy source is solar cell. Near infrared quantum cutting luminescence method can doubly transfer large energy photon which is not sensitive to Si or Ge solar cell to small energy photon which is sensitive to Si or Ge solar cell. It can resolve the spectral mismatch problem and largely enhance solar cell efficiency. Therefore, it is significant. The concentration effect of near-infrared quantum cutting luminescence of Tm3+Bi3+∶YNbO4 phosphor is reported in present manuscript. Through the measurement of excitation and emission spectra, it is found that the Tm0.058Bi0.010Y0.932NbO4 powder phosphor has intense 1 820.0 nm near-infrared quantum cutting luminescence. Further analysis finds they are multi-photon quantum cutting luminescence induced by the cross-energy transfer process. The population of 1G4 energy level may be directly transferred to lower energy level mainly through {1G4­3H4, 3H6­3H5} and {1G4­3H5, 3H6­3H4} cross-energy transfer processes, i. e. one population of the 1G4 energy level may effectively lead to two populations, which are positioned at the 3H4 and 3H5 energy levels, respectively, mainly through {1G4­3H4, 3H6­3H5} and {1G4­3H5, 3H6­3H4} cross-energy transfer processes. This may also effectively lead to three populations of the 3F4 energy level through {3H4­3F4, 3H6­3F4} cross-energy transfer process from the 3H4 level and multi-phonon non-radiative relaxation from the 3H5 level, respectively. This results in the effective three-photon near-infrared quantum cutting of the 3F4­3H6 fluorescence of Tm3+ ion. It's also found that the sensitization action of Bi3+ ion to Tm3+ ion is very strong. The enhancement of the 1 820.0 nm near-infrared quantum cutting luminescence, of Tm0.058Bi0.010Y0.932NbO4 relative to Tm0.005Y0.995NbO4, is about 175.5 times, when excited by the 302.0 nm light. The present results are significant for the exploration of the next-generation multi-photon near-infrared quantum cutting germanium solar cell.

[Near-infrared quantum cutting downconversion luminescence of Yb3+ ion cooperative energy transferred from YVO4 matrix donor].

The present manuscript researches the near infrared quantum cutting luminescence phenomena of Yb3+ ion in YVO4 crystal matrix The luminescence spectra, excitation spectra and fluorescence lifetimes were measured. It was found that the excitation of YVO4 crystal matrix energy band by 322.0 nm light can result in the effective secondary cooperative energy transfer of Yba+ ion from the YVO4 crystal matrix It results in the intense 985.5 nm 2F(5/2)-->2F(7/2) near infrared quantum cutting luminescence of Yb3+ ion. Meanwhile, the 430.O nm luminescence intensity of YVO4 crystal matrix decreases greatly. From the experimental measurements, it was found that the lifetime of 430.0 nm fluorescence of (A) Yb(1.5) : YVO4 crystal is tauA = 3.785 s and that of (B) YVO4 crystal is tauB=22.72 s. It was found also that the theoretical efficiency up limit of quantum cutting of (A) Yb(1.5) : YVO4 crystal is about eta1.5%=183-3%.

[Three photons quantum-cutting system on the rear surface of cells to improve the efficiencies of solar cells].

The authors present a solar cell model with a three photons quantum-cutting system on the rear surface, then the method of calculation of limiting efficiencies was used to get the maximum efficiency 58.58% at the band gap Eg=0.9315 eV, and in contrast with two-photons quantum-cutting system, it is greatly improved. The result can prove that the three-photons quantum-cutting has a great sense to improve the efficiencies of solar cells. It is the exciting development for us to find out the useful luminescence materials to get the high efficiency.

[Spectroscopy parameters of Ho3+ in Ho3+ : FOG and Ho3+ : FOV].

In the present paper, the absorption spectra of Ho3+ (0.5 mol%)-doped oxyfluoride glass (FOG) sample and Ho3+ (0.5 mol%)-doped oxyfluoride vitroceramics (FOV) sample were measured through experiment. The authors calculated the intensity parameters omega 2, 4, 6 of the two materials according to J-O theory, and analyzed the possible reason for the difference between the two materials on the intensity parameters. After that the authors calculated oscillator strength, spontaneous radiative transition rate, branching ratio and integrated emission cross section and some other spectroscopic parameters of several excited states and then made a comparative analysis of the two materials based on these spectroscopic parameters. The authors found that the oscillator strength of trivalent holmium iron in FOV is about the same with the oscillator strength in YAlO3 and is similar to oscillator strength in FOG, while slightly larger than in that LBTAF and much larger than that in LaF3 and ZBLAN. By analyzing the calculated spectroscopic parameters, it can be found that some transitions, especially 5I7 --> 5I8, 5F5 --> 5I8 etc., have a relatively large oscillator strengths(larger than 10(-6)) and large integrated emission cross sections(larger than 10(-18) cm). These transitions have the conditions to form laser passages, so they are worth a lot of attention. At last, application prospects of several strong luminescence transitions were concluded.

Case-control study on bone setting manipulation for the treatment of over degree II supination-eversion fractures of ankle joint / 中国骨伤

<p><b>OBJECTIVE</b>To explore therapeutic effects of bone setting manipulation for the treatment of over degree II supination-eversion fractures of ankle,and analyze manipulative reduction mechanism.</p><p><b>METHODS</b>From 2005 to 2008, 95 patients with over degree II supination-eversion fractures of ankle were treated respectively by manipulation and operation. There were 43 cases [11 males and 32 females with an average age of (44.95 +/- 12.65) years] in manipulation group, and 2 cases were degree II, 11 cases were degree III, and 30 cases were degree IV. There were 52 cases [21 males and 31 females with an average age of (39.96 +/- 13.28) years] in operative group,and 6 cases were degree II, 18 cases were degree III, and 28 cases were degree IV. Bone setting manipulation and hard splint external fixation were applied to manipulative group. Operative reduction internal fixation was performed in operative group. X-ray was used to evaluate reduction of fracture before and after treatment, 2 months after treatment. Ankle joint function was evaluated according to Olerud-Molander scoring system after 6 months treatment.</p><p><b>RESULTS</b>All patients were followed up with good reduction. Three cases occurred wound complication in operative group, but not in manipulative group. In manipulation group, 19 cases got excellent results, 20 cases good and 4 cases fair; while in operative group, 30 cases got excellent results, 20 cases good and 2 cases poor. There were no significant differences in fracture reduction and ankle joint function recovery between two groups (P > 0.05). Efficacy of operative treatment was better than that of manipulative treatment at degree IV fracture (P < 0.05).</p><p><b>CONCLUSION</b>Bone setting manipulation is a good method for treating supination-eversion ankle joint fractures, which has advantages of simple and safe operation, reliable efficacy. For ankle join fracture at degree IV, manipulative reduction should be adopted earlier, and operative treatment also necessary</p>