Nanofeatured surfaces in dental implants: contemporary insights and impending challenges.

Dental implant therapy, established as standard-of-care nearly three decades ago with the advent of microrough titanium surfaces, revolutionized clinical outcomes through enhanced osseointegration. However, despite this pivotal advancement, challenges persist, including prolonged healing times, restricted clinical indications, plateauing success rates, and a notable incidence of peri-implantitis. This review explores the biological merits and constraints of microrough surfaces and evaluates the current landscape of nanofeatured dental implant surfaces, aiming to illuminate strategies for addressing existing impediments in implant therapy. Currently available nanofeatured dental implants incorporated nano-structures onto their predecessor microrough surfaces. While nanofeature integration into microrough surfaces demonstrates potential for enhancing early-stage osseointegration, it falls short of surpassing its predecessors in terms of osseointegration capacity. This discrepancy may be attributed, in part, to the inherent "dichotomy kinetics" of osteoblasts, wherein increased surface roughness by nanofeatures enhances osteoblast differentiation but concomitantly impedes cell attachment and proliferation. We also showcase a controllable, hybrid micro-nano titanium model surface and contrast it with commercially-available nanofeatured surfaces. Unlike the commercial nanofeatured surfaces, the controllable micro-nano hybrid surface exhibits superior potential for enhancing both cell differentiation and proliferation. Hence, present nanofeatured dental implants represent an evolutionary step from conventional microrough implants, yet they presently lack transformative capacity to surmount existing limitations. Further research and development endeavors are imperative to devise optimized surfaces rooted in fundamental science, thereby propelling technological progress in the field.

Beyond microroughness: novel approaches to navigate osteoblast activity on implant surfaces.

Considering the biological activity of osteoblasts is crucial when devising new approaches to enhance the osseointegration of implant surfaces, as their behavior profoundly influences clinical outcomes. An established inverse correlation exists between osteoblast proliferation and their functional differentiation, which constrains the rapid generation of a significant amount of bone. Examining the surface morphology of implants reveals that roughened titanium surfaces facilitate rapid but thin bone formation, whereas smooth, machined surfaces promote greater volumes of bone formation albeit at a slower pace. Consequently, osteoblasts differentiate faster on roughened surfaces but at the expense of proliferation speed. Moreover, the attachment and initial spreading behavior of osteoblasts are notably compromised on microrough surfaces. This review delves into our current understanding and recent advances in nanonodular texturing, meso-scale texturing, and UV photofunctionalization as potential strategies to address the "biological dilemma" of osteoblast kinetics, aiming to improve the quality and quantity of osseointegration. We discuss how these topographical and physicochemical strategies effectively mitigate and even overcome the dichotomy of osteoblast behavior and the biological challenges posed by microrough surfaces. Indeed, surfaces modified with these strategies exhibit enhanced recruitment, attachment, spread, and proliferation of osteoblasts compared to smooth surfaces, while maintaining or amplifying the inherent advantage of cell differentiation. These technology platforms suggest promising avenues for the development of future implants.

Solving the non-submodular network collapse problems via Decision Transformer.

Given a graph G, the network collapse problem (NCP) selects a vertex subset S of minimum cardinality from G such that the difference in the values of a given measure function f(G)-f(G∖S) is greater than a predefined collapse threshold. Many graph analytic applications can be formulated as NCPs with different measure functions, which often pose a significant challenge due to their NP-hard nature. As a result, traditional greedy algorithms, which select the vertex with the highest reward at each step, may not effectively find the optimal solution. In addition, existing learning-based algorithms do not have the ability to model the sequence of actions taken during the decision-making process, making it difficult to capture the combinatorial effect of selected vertices on the final solution. This limits the performance of learning-based approaches in non-submodular NCPs. To address these limitations, we propose a unified framework called DT-NC, which adapts the Decision Transformer to the Network Collapse problems. DT-NC takes into account the historical actions taken during the decision-making process and effectively captures the combinatorial effect of selected vertices. The ability of DT-NC to model the dependency among selected vertices allows it to address the difficulties caused by the non-submodular property of measure functions in some NCPs effectively. Through extensive experiments on various NCPs and graphs of different sizes, we demonstrate that DT-NC outperforms the state-of-the-art methods and exhibits excellent transferability and generalizability.

Development of a multi-wear-site, deep learning-based physical activity intensity classification algorithm using raw acceleration data.

BACKGROUND: Accelerometers are widely adopted in research and consumer devices as a tool to measure physical activity. However, existing algorithms used to estimate activity intensity are wear-site-specific. Non-compliance to wear instructions may lead to misspecifications. In this study, we developed deep neural network models to classify device placement and activity intensity based on raw acceleration data. Performances of these models were evaluated by making comparisons to the ground truth and results derived from existing count-based algorithms. METHODS: 54 participants (26 adults 26.9±8.7 years; 28 children, 12.1±2.3 years) completed a series of activity tasks in a laboratory with accelerometers attached to each of their hip, wrist, and chest. Their metabolic rates at rest and during activity periods were measured using the portable COSMED K5; data were then converted to metabolic equivalents, and used as the ground truth for activity intensity. Deep neutral networks using the Long Short-Term Memory approach were trained and evaluated based on raw acceleration data collected from accelerometers. Models to classify wear-site and activity intensity, respectively, were evaluated. RESULTS: The trained models correctly classified wear-sites and activity intensities over 90% of the time, which outperformed count-based algorithms (wear-site correctly specified: 83% to 85%; wear-site misspecified: 64% to 75%). When additional parameters of age, height and weight of participants were specified, the accuracy of some prediction models surpassed 95%. CONCLUSIONS: Results of the study suggest that accelerometer placement could be determined prospectively, and non-wear-site-specific algorithms had satisfactory accuracies. The performances, in terms of intensity classification, of these models also exceeded typical count-based algorithms. Without being restricted to one specific wear-site, research protocols for accelerometers wear could allow more autonomy to participants, which may in turn improve their acceptance and compliance to wear protocols, and in turn more accurate results.

Human Gingival Fibroblast Growth and Function in Response to Laser-Induced Meso- and Microscale Hybrid Topography on Dental Implant Healing Abutments.

PURPOSE: To examine the behavior and function of human gingival fibroblasts growing on healing abutments with or without laser-textured topography. MATERIALS AND METHODS: Human primary gingival connective tissue fibroblasts were cultured on healing abutments with machined or laser-textured (Laser-Lok, BioHorizons) surfaces. Cellular and molecular responses were evaluated by a variety of tests, including cell density assay (WST-1), fluorescence microscopy, real-time quantitative reverse-transcription polymerase chain reaction (qRT-PCR), and detachment tests. RESULTS: The machined surface showed monodirectional traces and scratches from milling, whereas the laser-textured surface showed a distinct morphology consisting of monodirectional mesoscale channels (15-µm pitch) and woven oblique microridges formed within the channels. There were no differences in initial fibroblast attachment, subsequent fibroblast proliferation, or collagen production between the machined and laser-textured surfaces. Fibroblasts growing on a laser-textured surface were found to spread in one direction along the mesochannels, while cells growing on machined surfaces tended to spread randomly. Fibroblasts on laser-textured surfaces were 1.8 times more resistant to detachment than those on machined surfaces. An adhesive glycoprotein (fibronectin) and transmembrane adhesion linker gene (integrin ß-1) were upregulated on laser-textured surfaces. CONCLUSIONS: The increased fibroblast retention, uniform growth, and increased transcription of cell adhesion proteins compellingly explain the enhanced tissue-level response to laser-created and hybrid-textured titanium surfaces. These results provide a cellular and molecular rationale for the tissue reaction to this unique surface; in addition, they support its extended use, from implants and healing abutments to diverse prosthetic components where enhanced soft tissue responses would be desirable.

Real-World Sensitization and Tolerance Pattern to Seafood in Fish-Allergic Individuals.

BACKGROUND: Seafood is a common cause of food allergy and anaphylaxis, but there are limited published real-world data describing the clinical presentation of fish and shellfish allergies. OBJECTIVE: This study aimed to examine the clinical characteristics, immunological profile, and tolerance pattern to fish, crustaceans, and mollusks in fish-allergic individuals. METHODS: Patients presenting with IgE-mediated fish allergy between 2016 and 2021 were recruited. A comprehensive sensitization profile including specific IgE and skin prick test to various fish and shellfish species and a detailed clinical history including individuals' recent seafood consumption were evaluated. RESULTS: A total of 249 fish-allergic individuals (aged 4.2 ± 5.8 years) were recruited from 6 allergy clinics in Hong Kong, and they had experienced their fish-allergic reaction 2.2 ± 3.4 years before enrollment. Seventy-five subjects (30%) reacted to either grass carp, salmon, grouper, or cod in oral food challenges. We identified an IgE sensitization gradient that corresponded to the level of ß-parvalbumin in fish. In total, 40% of fish-allergic individuals reported tolerance to 1 or more types of fish, more commonly to fish with a lower ß-parvalbumin level such as tuna and salmon, compared with ß-parvalbumin-rich fish such as catfish and grass carp. Despite fish and shellfish cosensitization, 41% of individuals reported tolerance to crustaceans, mollusks, or both, whereas shellfish avoidance occurred in half of the fish-allergic individuals, of whom 33% lacked shellfish sensitization. CONCLUSIONS: Fish allergy commonly presents in early childhood. A considerable proportion of fish-allergic patients are selectively tolerant to certain fish, typically those with lower levels of ß-parvalbumin. There is an unmet need to promote precision medicine for seafood allergies.

Comparing the Effectiveness of Physical Exercise Intervention and Melatonin Supplement in Improving Sleep Quality in Children with ASD.

PURPOSE: Previous studies have demonstrated that physical exercise can modulate the endogenous melatonin level in children with autism spectrum disorder (ASD) and improve their sleep quality. However, it remains unclear whether physical exercise or melatonin supplement, or a combination of both, is more effective in improving sleep quality in this population. The purpose of this study is to answer this research question by comparing the effectiveness of three types of interventions (physical exercise vs. melatonin supplement or a combination of both) in improving sleep quality in children with ASD. METHODS: Sixty-two (62) children diagnosed with ASD were randomly assigned to one of four groups: cycling (n = 18), melatonin supplement (n = 14), a combination of both (n = 12), and placebo control group (n = 18). Four (4) sleep parameters (sleep efficiency, sleep onset latency, sleep duration, and wake after sleep onset) were assessed. RESULTS: The results revealed a significant improvement in sleep efficiency, sleep onset latency, and sleep duration in all of the interventions, but not in the placebo control group. However, no significant group differences were found among the interventions (ps > .05). CONCLUSION: Our findings suggest similar effectiveness of physical exercise and melatonin supplementation in improving sleep quality in children with ASD.

Influence of Surface Contaminants and Hydrocarbon Pellicle on the Results of Wettability Measurements of Titanium.

Hydrophilicity/hydrophobicity-or wettability-is a key surface characterization metric for titanium used in dental and orthopedic implants. However, the effects of hydrophilicity/hydrophobicity on biological capability remain uncertain, and the relationships between surface wettability and other surface parameters, such as topography and chemistry, are poorly understood. The objective of this study was to identify determinants of surface wettability of titanium and establish the reliability and validity of the assessment. Wettability was evaluated as the contact angle of ddH2O. The age of titanium specimens significantly affected the contact angle, with acid-etched, microrough titanium surfaces becoming superhydrophilic immediately after surface processing, hydrophobic after 7 days, and hydrorepellent after 90 days. Similar age-related loss of hydrophilicity was also confirmed on sandblasted supra-micron rough surfaces so, regardless of surface topography, titanium surfaces eventually become hydrophobic or hydrorepellent with time. On age-standardized titanium, surface roughness increased the contact angle and hydrophobicity. UV treatment of titanium regenerated the superhydrophilicity regardless of age or surface roughness, with rougher surfaces becoming more superhydrophilic than machined surfaces after UV treatment. Conditioning titanium surfaces by autoclaving increased the hydrophobicity of already-hydrophobic surfaces, whereas conditioning with 70% alcohol and hydrating with water or saline attenuated pre-existing hydrophobicity. Conversely, when titanium surfaces were superhydrophilic like UV-treated ones, autoclaving and alcohol cleaning turned the surfaces hydrorepellent and hydrophobic, respectively. UV treatment recovered hydrophilicity without exception. In conclusion, surface roughness accentuates existing wettability and can either increase or decrease the contact angle. Titanium must be age-standardized when evaluating surface wettability. Surface conditioning techniques significantly but unpredictably affect existing wettability. These implied that titanium wettability is significantly influenced by the hydrocarbon pellicle and other contaminants inevitably accumulated. UV treatment may be an effective strategy to standardize wettability by making all titanium surfaces superhydrophilic, thereby allowing the characterization of individual surface topography and chemistry parameters in future studies.

Development and validation of assessment tools for food allergy-related knowledge and management confidence.

Background: Given the life-threatening nature of food allergy (FA), it is important to assess the level of knowledge among families with food-allergic patients and their ability to cope with anaphylaxis. This study constructed a FA knowledge questionnaire (FAKQ) and confidence in FA management skills (CIFAMS) questionnaire to assess understanding and attitudes toward FA management in food-allergic families. Methods: Items from literature review and expert panel showing ≥80% content validity index and semantic equivalence were selected for translation into Chinese. These questionnaires underwent feasibility pilot testing followed by cross-sectional validation to assess their psychometric properties of internal consistency, test-retest reliability, and construct validity with a FA quality-of-life questionnaire and discriminant validity. Exploratory factor analysis was performed to confirm their factor structure. Results: A total of 155 subjects (104 patients and 51 parents) completed a 20-item FAKQ and 10-item CIFAMS. Both tools showed acceptable internal consistency in baseline and retest groups. FAKQ and CIFAMS correlated for all subjects (P = .002) and for adults (P = .002), and similarly between CIFAMS and parent-reported FA independent measure (P = .005). Total score of FAKQ was sensitive to within-group differences of patients hospitalized for FA (P < .001). FAKQ and CIFAMS items were factored into 4 and 2 domains, respectively. Subjects scored the lowest on FAKQ items about signs of allergic reaction and CIFAMS items on epinephrine autoinjector use. Conclusion: FAKQ and CIFAMS developed by our group are valid and reliable in assessing knowledge and confidence in FA management in patients and parents. These tools are crucial for formulating education programs and advocacy campaigns for FA.

Allergic contact dermatitis in pediatric practice.

BACKGROUND: Allergic contact dermatitis (ACD) is prevalent among pediatric population, adolescent and young adults. Patients with ACD experience a lot of sociopsychological and quality-of-life (QoL) difficulties. Children and their caregivers alike are vulnerable to the burden of ACD. OBJECTIVE: We have, in this paper, provided an overview of ACD and discussed common and unusual causes of ACD. METHODS: We performed an up-to-date literature review in the English language on "allergic contact dermatitis" via PubMed Clinical Queries, using the keywords "allergic contact dermatitis" in August 2022. The search included meta-analyses, randomized controlled trials, clinical trials, case-control studies, cohort studies, observational studies, clinical guidelines, case series, case reports, and reviews. The search was restricted to English literature and children. RESULTS: ACD may be acute or chronic and it affects more than 20% of children and adults with significant quality-of-life impairments. ACD is manifested by varying degrees of cutaneous edema, vesiculation, and erythema. The hypersensitivity reaction is one of the most prevalent forms of immunotoxicity in humans. Localized acute ACD lesions can be managed with high-potency topical steroids; if ACD is severe or extensive, systemic corticosteroid therapy is often required to provide relief within 24 hours. In patients with more severe dermatitis, oral prednisone should be tapered over 2-3 weeks. Rapid discontinuation of corticosteroids can result in rebound dermatitis. Patch testing should be performed if treatment fails and the specific allergen or diagnosis remains unknown. CONCLUSION: ACD is common and can be a physically, psychologically, and economically burdensome disease. Diagnosis of ACD is primarily based on history (exposure to an allergen) and physical examination (morphology and location of the eruption). Skin patch test can help determine the causative allergen. Allergen avoidance is the cornerstone of management. Topical mid- or high-potency corticosteroids are the mainstay of treatment for lesions on less than 20% of the body area. Severe cases of ACD may require treatment with systemic corticosteroids.

Impact of comorbid allergic diseases on health-related quality of life of Hong Kong schoolchildren.

BACKGROUND: Studies on the relationship between childhood allergic disease and health-related quality of life (HRQOL) have mostly been confined to a single allergic condition. Therefore, a composite allergic score (CAS) was derived to assess the accumulated effect of eczema, asthma, and allergic rhinitis on HRQOL in Hong Kong schoolchildren. METHODS: Parents of grade one/two or grade eight/nine schoolchildren completed a questionnaire assessing the prevalence and severity of eczema (POEM), asthma (C-ACT/ACT), and allergic rhinitis (VAS) and schoolchildren's HRQOL (PedsQL). Three rounds of recruitment were conducted. A total of 19 primary and 25 secondary schools agreed to participate. RESULTS: Data from 1140 caregivers of grade one/two schoolchildren and 1048 grade eight/nine schoolchildren were imputed and analyzed. The proportion of female respondents were lower in grade one/two (37.7%) but higher in grade eight/nine (57.3%). 63.8% of grade one/two and 58.1% of grade eight/nine schoolchildren reported having at least one allergic disease. In general, greater disease severity was significantly associated with lower HRQOL. After controlling for age, gender, and allergic comorbidity in hierarchical regressions, CAS significantly predicted all HRQOL outcomes in both grade one/two and grade eight/nine schoolchildren. Female grade eight/nine schoolchildren reported lower HRQOL outcomes. CONCLUSION: Composite allergic score may be a practical tool to evaluate allergic comorbidity and the effectiveness of treatments targeting common pathological mechanisms of allergic diseases. Non-pharmaceutical approaches should be considered, especially for patients with more than one allergic disease and greater severity.

Differential patterns of fish sensitization in Asian populations: Implication for precision diagnosis.

BACKGROUND: The current diagnostics of fish allergy lack sufficient accuracy such that more reliable tests such as component-resolved diagnosis (CRD) are urgently needed. This study aimed at identifying fish allergens of salmon and grass carp and evaluating the sensitization pattern in fish allergic subjects from two distinct populations in Asia. METHODS: One hundred and three fish allergic subjects were recruited from Hong Kong (67 subjects) and Japan (46 subjects). Western blot and mass spectrometry were used to identify allergens from salmon and grass carp. Fish allergens were purified and tested against 96 sera on ELISA to analyze patients' sensitization pattern. The protein profiles of salmon meat prepared under different cooking methods until core temperature reached 80 °C were evaluated by SDS-PAGE and mass spectrometry. RESULTS: Three common allergens between salmon and grass carp, namely enolase, glycerldehyde-3-phosphate dehydrogenase (GAPDH) and parvalbumin, and two salmon-specific allergens collagen and aldolase were identified. Parvalbumin was the major allergen for both fishes showing an overall sensitization rate of 74.7%, followed by collagen (38.9%), aldolase (38.5%) and enolase (17.8%). Japanese subjects showed more diverse allergen sensitization pattern and more frequent IgE-binding to heat-labile salmon allergens. Compared with steaming and boiling, cooking by baking and frying retained more fish proteins inclusive of heat-labile allergens. CONCLUSIONS: Fish allergic patients from different Asian populations show varying fish allergen sensitization profiles. The relevant extracts and components for diagnosis are population-dependent but parvalbumin and collagen are important biomarkers. Cooking methods modify allergen composition of salmon and appear to influence patients' allergic manifestations.

Conditional Mitigation of Dental-Composite Material-Induced Cytotoxicity by Increasing the Cure Time.

Light-cured composite resins are widely used in dental restorations to fill cavities and fabricate temporary crowns. After curing, the residual monomer is a known to be cytotoxic, but increasing the curing time should improve biocompatibility. However, a biologically optimized cure time has not been determined through systematic experimentation. The objective of this study was to examine the behavior and function of human gingival fibroblasts cultured with flowable and bulk-fill composites cured for different periods of time, while considering the physical location of the cells with regard to the materials. Biological effects were separately evaluated for cells in direct contact with, and in close proximity to, the two composite materials. Curing time varied from the recommended 20 s to 40, 60, and 80 s. Pre-cured, milled-acrylic resin was used as a control. No cell survived and attached to or around the flowable composite, regardless of curing time. Some cells survived and attached close to (but not on) the bulk-fill composite, with survival increasing with a longer curing time, albeit to <20% of the numbers growing on milled acrylic even after 80 s of curing. A few cells (<5% of milled acrylic) survived and attached around the flowable composite after removal of the surface layer, but attachment was not cure-time dependent. Removing the surface layer increased cell survival and attachment around the bulk-fill composite after a 20-s cure, but survival was reduced after an 80-s cure. Dental-composite materials are lethal to contacting fibroblasts, regardless of curing time. However, longer curing times mitigated material cytotoxicity exclusively for bulk-fill composites when the cells were not in direct contact. Removing the surface layer slightly improved biocompatibility for cells in proximity to the materials, but not in proportion to cure time. In conclusion, mitigating the cytotoxicity of composite materials by increasing cure time is conditional on the physical location of cells, the type of material, and the finish of the surface layer. This study provides valuable information for clinical decision making and novel insights into the polymerization behavior of composite materials.

Impact of nano-scale trabecula size on osteoblastic behavior and function in a meso-nano hybrid rough biomimetic zirconia model.

PURPOSE: A novel implant model consisting of meso-scale cactus-inspired spikes and nano-scale bone-inspired trabeculae was recently developed to optimize meso-scale roughness on zirconia. In this model, the meso-spike dimension had a significant impact on osteoblast function. To explore how different nano-textures impact this model, here we examined the effect of different nano-trabecula sizes on osteoblast function while maintaining the same meso-spike conformation. METHODS: Zirconia disks with meso-nano hybrid surfaces were created by laser etching. The meso-spikes were fixed to 40 µm high, whereas the nano-texture was etched as large and small trabeculae of average Feret diameter 237.0 and 134.1 nm, respectively. A polished surface was also prepared. Rat bone marrow-derived and human mesenchymal stromal cell-induced osteoblasts were cultured on these disks. RESULTS: Hybrid rough surfaces, regardless of nano-trabecula dimension, robustly promoted the osteoblastic differentiation of both rat and human osteoblasts compared to those on polished surfaces. Hybrid surfaces with small nano-trabeculae further enhanced osteoblastic differentiation compared with large nano-trabeculae. However, the difference in osteoblastic differentiation between small and large nano-trabeculae was much smaller than the difference between the polished and hybrid rough surfaces. The nano-trabecula size did not influence osteoblast attachment and proliferation, or protein adsorption. Both hybrid surfaces were hydro-repellent. The atomic percentage of surface carbon was lower on the hybrid surface with small nano-trabeculae. CONCLUSIONS: Small nano-trabeculae promoted osteoblastic differentiation more than large nano-trabeculae when combined with meso-scale spikes. However, the biological impact of different nano-trabeculae was relatively small compared with that of different dimensions of meso-spikes.

Disparity in the Influence of Implant Provisional Materials on Human Gingival Fibroblasts with Different Phases of Cell Settlement: An In Vitro Study.

The development of healthy peri-implant soft tissues is critical to achieving the esthetic and biological success of implant restorations throughout all stages of healing and tissue maturation, starting with provisionalization. The purpose of this study was to investigate the effects of eight different implant provisional materials on human gingival fibroblasts at various stages of cell settlement by examining initial cell attachment, growth, and function. Eight different specimens-bis-acrylic 1 and 2, flowable and bulk-fill composites, self-curing acrylic 1 and 2, milled acrylic, and titanium (Ti) alloy as a control-were fabricated in rectangular plates (n = 3). The condition of human gingival fibroblasts was divided into two groups: those in direct contact with test materials (contact experiment) and those in close proximity to test materials (proximity experiment). The proximity experiment was further divided into three phases: pre-settlement, early settlement, and late settlement. A cell culture insert containing each test plate was placed into a well where the cells were pre-cultured. The number of attached cells, cell proliferation, resistance to detachment, and collagen production were evaluated. In the contact experiment, bis-acrylics and composites showed detrimental effects on cells. The number of cells attached to milled acrylic and self-curing acrylic was relatively high, being approximately 70% and 20-30%, respectively, of that on Ti alloy. There was a significant difference between self-curing acrylic 1 and 2, even with the same curing modality. The cell retention ability also varied considerably among the materials. Although the detrimental effects were mitigated in the proximity experiment compared to the contact experiment, adverse effects on cell growth and collagen production remained significant during all phases of cell settlement for bis-acrylics and flowable composite. Specifically, the early settlement phase was not sufficient to significantly mitigate the material cytotoxicity. The flowable composite was consistently more cytotoxic than the bulk-fill composite. The harmful effects of the provisional materials on gingival fibroblasts vary considerably depending on the curing modality and compositions. Pre-settlement of cells mitigated the harmful effects, implying the susceptibility to material toxicity varies depending on the progress of wound healing and tissue condition. However, cell pre-settlement was not sufficient to fully restore the fibroblastic function to the normal level. Particularly, the adverse effects of bis-acrylics and flowable composite remained significant. Milled and self-curing acrylic exhibited excellent and acceptable biocompatibility, respectively, compared to other materials.

Cell Type-Specific Effects of Implant Provisional Restoration Materials on the Growth and Function of Human Fibroblasts and Osteoblasts.

Implant provisional restorations should ideally be nontoxic to the contacting and adjacent tissues, create anatomical and biophysiological stability, and establish a soft tissue seal through interactions between prosthesis, soft tissue, and alveolar bone. However, there is a lack of robust, systematic, and fundamental data to inform clinical decision making. Here we systematically explored the biocompatibility of fibroblasts and osteoblasts in direct contact with, or close proximity to, provisional restoration materials. Human gingival fibroblasts and osteoblasts were cultured on the "contact" effect and around the "proximity" effect with various provisional materials: bis-acrylic, composite, self-curing acrylic, and milled acrylic, with titanium alloy as a bioinert control. The number of fibroblasts and osteoblasts surviving and attaching to and around the materials varied considerably depending on the material, with milled acrylic the most biocompatible and similar to titanium alloy, followed by self-curing acrylic and little to no attachment on or around bis-acrylic and composite materials. Milled and self-curing acrylics similarly favored subsequent cellular proliferation and physiological functions such as collagen production in fibroblasts and alkaline phosphatase activity in osteoblasts. Neither fibroblasts nor osteoblasts showed a functional phenotype when cultured with bis-acrylic or composite. By calculating a biocompatibility index for each material, we established that fibroblasts were more resistant to the cytotoxicity induced by most materials in direct contact, however, the osteoblasts were more resistant when the materials were in close proximity. In conclusion, there was a wide variation in the cytotoxicity of implant provisional restoration materials ranging from lethal and tolerant to near inert, and this cytotoxicity may be received differently between the different cell types and depending on their physical interrelationships.

Examining the criterion validity of two scalable, information technology-based systems designed to measure the quantity and quality of movement behaviours of children from Hong Kong primary schools: a cross-sectional validation study.

OBJECTIVES: Research has shown that having adequate quantity and quality of physical activity can contribute to the health and well-being of children. Nonetheless, existing tools to measure these constructs in children have limitations in terms of their objectivity and scalability. In this study, we provide criterion validity evidence of two systems built on commercially available sensors (ie, gyroscopes and infrared cameras), designed to measure children's moderate-to-vigorous physical activity and fundamental movement skill proficiencies. DESIGN: Cross-sectional. SETTING: Primary schools in Hong Kong. PARTICIPANTS: Data from 30 (age=8.55±1.25 years) and 1174 (age=9.15±1.63 years) children were included for the validation of physical activity and fundamental movement skills measures, respectively. Children's outcomes were simultaneously measured using the developed systems and existing, well-established measures (accelerometers and expert ratings). RESULTS: We found a strong correlation between physical activity outcomes measured using our developed system and accelerometers (Pearson r=0.795). Motor skill proficiency scored using our real-time rating system had strong agreement with expert ratings (percentage agreement=84%-94%, kappa=0.661 to 0.859). DISCUSSION: Results of the current study supported the application of the respective systems in physical education and large-scale research studies. Collection of such data at mass levels could help researchers depict the complex relation between children's quantity and quality of physical activity.

Study protocol for a randomized controlled trial comparing the effectiveness of physical exercise and melatonin supplement on treating sleep disturbance in children with autism spectrum disorders.

BACKGROUND: Previous study showed that both melatonin supplement and physical exercise intervention could improve sleep quality in children with autism spectrum disorders (ASD) with the increase in endogenous melatonin level. However, none of the studies have directly compared the effectiveness between the two interventions on treating sleep disturbance in children with ASD. Without direct comparison, we do not know which intervention is better. Thus, we designed a study to compare which intervention is more effective to treat sleep disturbance in children with ASD and to examine whether the combination of the two could be the most efficacious. We present a protocol for conducting a randomized controlled trial to compare the effectiveness of physical exercise and melatonin supplement on treating sleep disturbance in children with ASD. STUDY DESIGN: The proposed study will be a four-group randomised control trial (RCT) design, with equal allocation of participants to the three intervention groups and one control group. METHODS: All eligible participants will be randomly allocated to a morning jogging group, a melatonin supplement group, a combination group and a control group. Changes in sleep quality will be monitored through actigraphic assessment and parental sleep logs. Melatonin levels represented by 6-sulfoxymelatonin will be measured from the participants' 24-h and the first morning void urinary samples. All the assessments will be carried out before the intervention (T1), in the mid of the study (5 weeks after the commencement of the study) (T2) and after the 10-week intervention (T3). Level of statistical significance will be set at 5% (i.e. p < .05). The results of this trial will be submitted for publication in peer-reviewed journal. FINDINGS: The findings will provide evidence to determine whether physical exercise or melatonin supplement or the combination of interventions is the most effective to treat sleep disturbance in children with ASD.

Spinal muscular atrophy: Surviving respiratory failure, intensive care and pursuing creatively fulfilled life.

INTRODUCTION: Spinal muscular atrophy is a congenital condition associated with mutations in the SMN1 gene. Patients have normal intellectual development, but the natural history is progressive respiratory failure resulting in premature death. CASE: Diagnosed with spinal muscular atrophy type 2 in early primary school, the wheelchair-bound girl developed severe pneumonia on one occasion, when she became critically ill and was admitted to the paediatric intensive care unit with multiorgan dysfunction, requiring mechanical ventilation and high inotropic support. Parents and the patient expressed strong desire for full respiratory and intensive care support to be given. Survived the episode, she is wheelchair ambulatory and continues to pursue a creative artistic career. DISCUSSION: Children with SMA and their families need to be supported by a comprehensive multi-disciplinary team to manage this illness. Pediatricians and healthcare givers must provide up-to-date health advice on COVID-19 prophylaxis and management to special groups of patients with respiratory and neurological risks.

A Nurse-Led Web-Based Home Asthma Education Program for Children and their Families: A Randomized Controlled Trial.

BACKGROUND: Education is the most essential component for effective asthma control and is endorsed by guidelines worldwide. However, multiple caregivers are often jointly involved in child care, and educating them is often a challenging task. This study determines the effectiveness of a web-based asthma education program in enhancing knowledge, attitude and practice of caregivers and reducing unscheduled hospital visits of children for asthma. METHODS: A two-arm, randomized controlled trial was carried out between November 2018 and December 2019. Child-parent dyads were recruited when the children (4-11 years of age) were admitted due to asthma exacerbations. A nurse-led web-based home asthma education program was developed and implemented before discharge. Outcomes included parents' knowledge, attitude and practice regarding asthma and frequency of unscheduled visits and readmissions in children. RESULTS: 112 child-parent dyads were enrolled. The parents' knowledge, attitude and practice and the number of unscheduled visits of the children were found to be significantly different between two groups at different time points (Ps < 0.001) with a large effect size (Cohen's d > 0.8). CONCLUSION: This intervention was shown to be an effective strategy to educate caregivers who are jointly involved in their child's asthma control after discharge from hospital. TRIAL REGISTRATION: The Chinese Clinical Trial Registry, World Health Organization (ChiCTR1800019706).