The 45° and 60° of sagittal femoral tunnel placement in anterior cruciate ligament reconstruction provide similar knee stability.

PURPOSE: The aim of the present study was to compare 45° and 60° of sagittal femoral tunnel angles in terms of anterior tibial translation (ATT), valgus angle and graft in situ force following anterior cruciate ligament reconstruction (ACLR). METHODS: Ten porcine knees were subjected to the following loading conditions: (1) 89 N anterior tibial load at 35° (full extension), 60° and 90° of knee flexion and (2) 5 N m valgus tibial moment at 35° and 45° of knee flexion. ATT and graft in situ force of the intact anterior cruciate ligament (ACL) and ACLR were collected using a robotic universal force/moment sensor (UFS) testing system for (1) ACL intact, (2) ACL-deficient (ACLD) and (3) two different ACLR using different sagittal femoral tunnel angles (coronal 45°/sagittal 45° and coronal 45°/sagittal 60°). RESULTS: During the anterior tibial load, the femoral tunnel angle of ACLR knees at coronal 45°/sagittal 45° and 60° had significantly higher ATT than that of the ACL-intact knees at 60° of knee flexion (p < 0.05). The femoral tunnel angle of ACLR knees at coronal 45°/sagittal 60° had significantly lower graft in situ force than that of the ACL-intact knees at 60° and 90° of knee flexion (p < 0.05). During the valgus tibial moment, the femoral tunnel angle of ACLR knees at coronal 45°/sagittal 45° and 60° had significantly lower graft in situ force than that of the ACL-intact knees at all knee flexions (p < 0.05). CONCLUSIONS: The femoral tunnel angle of ACLR knees at coronal 45°/sagittal 45° provided similar ATT, valgus angle and graft in situ force to that of ACLR knees at coronal 45°/sagittal 60°. Therefore, both femoral tunnel angles could be used in ACLR, as the sagittal femoral tunnel angle does not appear to be relevant in post-operative knee stability. LEVEL OF EVIDENCE: Not applicable.

Innovative hydrogel-patch combination for large annulus fibrosus defects: a prospective approach to address herniation recurrence.

BACKGROUND CONTEXT: Large annulus fibrosus (AF) defects often lead to a high rate of reherniation, particularly in the medial AF region, which has limited self-healing capabilities. The increasing prevalence of herniated discs underscores the need for effective repair strategies. PURPOSE: The objectives of this study were to design an AF repair technique to reduce solve the current problems of insufficient mechanical properties and poor sealing capacity. STUDY DESIGN: In vitro biomechanical experiments and finite element analysis. METHODS: The materials used in this study were patches and hydrogels with good biocompatibility and sufficient mechanical properties to withstand loading in the lumbar spine. Five repair techniques were assessed in this study: hydrogel filler (HF), AF patch medial barrier (MB), AF patch medial barrier and hydrogel filler (MB&HF), AF patch medial-lateral barrier (MLB), and AF patch medial-lateral barrier and hydrogel filler (MLB&HF). The repair techniques were subjected to in vitro testing (400 N axial compression and 0-500 N fatigue loading at 5Hz) and finite element analysis (400 N axial compression) to evaluate the effectiveness at repairing large AF defects. The evaluation included repair tightness, spinal stability, and fatigue resistance. RESULTS: From the in vitro testing, the failure load of the repair techniques was in the following order HF MLB >MB&HF >MLB&HF. CONCLUSIONS: The combined use of patches and hydrogels exhibited promising mechanical properties postdiscectomy, providing a promising solution for addressing large AF defects and improving disc stability. CLINICAL SIGNIFICANCE: This study introduces a promising method for repairing large annular fissure (AF) defects after disc herniation, combining patch repair with a hydrogel filler. These techniques hold potential for developing clinical AF repair products to address this challenging issue.

Medial-pivot total knee arthroplasty enhances tibiofemoral axial rotation stability in weight-bearing mid-range flexion compared to posterior-stabilised system.

PURPOSE: Total knee arthroplasty (TKA) stands as a primary intervention for severe knee ailments, yet concerns remain regarding postoperative patient satisfaction and flexion instability. This study aims to evaluate the in-vivo kinematics of medial-pivot (MP) and posterior-stabilised (PS) designs during step-up activity, in comparison to the kinematics of the nonoperated contralateral knee. METHODS: Sixteen patients with PS-TKA and 14 with MP-TKA were retrospectively examined. Clinical outcomes were assessed using patient-completed questionnaires. Motion during step-up was captured using a dual fluoroscopic system. Statistical analysis was applied to evaluate the in-vivo tibiofemoral six-degree-of-freedom kinematics and articular contact positions between the two groups. RESULTS: Despite being older, patients in the MP group reported higher postoperative subjective scores for weight-bearing functional activities. The axial rotation centres of MP-TKA located on the medial tibial plateau exhibited less variance compared to PS-TKA and contralateral knees. Compared to the contralateral knee (contralateral to medial-pivot [C-MP] or contralateral to posterior-stabilised [C-PS]), the MP group exhibited limited range of motion in terms of anteroposterior translation (MP: 3.6 ± 1.3 mm vs. C-MP: 7.4 ± 2.5 mm, p < 0.01) and axial rotation (MP: 6.6 ± 1.9° vs. C-MP: 10.3 ± 4.9°, p = 0.02), as well as in the PS group for anteroposterior translation (PS: 3.9 ± 1.7 mm vs. C-PS: 7.2 ± 3.7 mm, p < 0.01). CONCLUSION: The MP group with better postoperative ratings demonstrated a more stable MP axial rotation pattern during step-up activity compared to the PS group, underscoring the pivotal role of prosthetic design in optimising postoperative rehabilitation and functional recovery. LEVEL OF EVIDENCE: Level III.

Optimal intersurface stability for unicompartmental femoral component design with two pegs placed on the distal resection surface: 5 mm peg length increment and 10° peg inclination.

PURPOSE: The present study aimed to identify the optimal design of the unicompartmental femoral component through parameter analysis and stability evaluation. METHODS: A finite element (FE) analysis was applied to analyse and adjust the parameter combinations of the anterior tilt angle of the posterior condyle resection surface, the position of the peg, the length of the peg and the inclination angle of the peg, resulting in 10 different FE models. Setting three knee flexion angles of 8.4° (maximum load state during walking), 40° (maximum load state during stair climbing) and 90° (maximum load state during squatting exercise), quantitatively analysing the micromotion values of the bone-prosthesis interface and defining a weighted scoring formula to evaluate the stability of different FE models. The validity of the FE analysis was verified using the Digital Image Correlation (DIC) device. RESULTS: The errors between the FE analysis and the DIC test at three flexion angles were 5.6%, 1.7% and 11.1%. The 10 different femoral component design models were measured separately. The FE analysis demonstrated that the design with a 0° anterior tilt angle of the posterior condyle resection surface, both pegs placed on the distal resection surface, lengthened 5 mm pegs and a 10° peg inclination angle provided the best stability. CONCLUSION: The current study proposed a method for evaluating the stability of the femoral component design. The optimal intersurface stability design of the unicompartmental femoral component was achieved with two pegs placed on the distal resection surface, a 5-mm peg length increment and a 10° peg inclination. These results might provide a reference for the selection of unicompartmental femoral components in clinical practice and therefore improve the survival rate of future unicompartmental knee arthroplasty. LEVEL OF EVIDENCE: Level III.

Sarcopenia in older adults is associated with static postural control, fear of falling and fall risk: A study of Romberg test.

BACKGROUND: As a geriatric syndrome, sarcopenia may exacerbate static postural control and increase fall risk among older adults. The Romberg test, a simple method to assess static postural control, has the potential to predict fall, but has rarely been used to assess static postural control and fall risk in sarcopenic older adults. RESEARCH QUESTION: How does sarcopenia increase fall risk by affecting static postural control? METHODS: Forty-four older adults performed the Romberg test and were included for analyses. Romberg parameters, including Center of Pressure (CoP), Center of Mass (CoM) and Displacement Angle (DA), were collected under eyes-open/eyes-closed conditions. Sarcopenia was defined according to the Asian Working Group for Sarcopenia 2019 criteria. Fall risk was assessed using the Morse Elderly Fall Risk Assessment Scale (MFS), and fear of falling was evaluated using the Falls Efficacy Scale-International (FES-I). Multivariate linear regression models were conducted to examine the associations of sarcopenia with Romberg test parameters, fear of falling, and fall risk. RESULTS: Sarcopenic older adults had higher scores of both fear of falling and fall risk (P<0.001 and =0.006, respectively), and worse static postural control parameters (P values ranging from <0.001-0.043) than healthy controls, demonstrated by the multivariate linear regression models. Most of the Romberg test parameters were significantly associated with fear of falling score, especially under eyes-closed condition, and fear of falling was further associated with higher fall risk score (ß=0.90, P=0.001). Meanwhile, the presence of sarcopenia also significantly increased fall risk score (ß=10.0, P<0.001). SIGNIFICANCE: Sarcopenia may increase fall risk in older adults via worsen static postural control ability and increase fear of falling. Paying attention and making efforts to prevent sarcopenia may help to alleviate postural control dysfunction, decrease fear of falling, so as to reduce fall risk and prevent severe injuries caused by fall accidents.

Development and Validation of a Novel In Vitro Joint Testing System for Reproduction of In Vivo Dynamic Muscle Force.

In vitro biomechanical experiments utilizing cadaveric specimens are one of the most effective methods for rehearsing surgical procedures, testing implants, and guiding postoperative rehabilitation. Applying dynamic physiological muscle force to the specimens is a challenge to reconstructing the environment of bionic mechanics in vivo, which is often ignored in the in vitro experiment. The current work aims to establish a hardware platform and numerical computation methods to reproduce dynamic muscle forces that can be applied to mechanical testing on in vitro specimens. Dynamic muscle loading is simulated through numerical computation, and the inputs of the platform will be derived. Then, the accuracy and robustness of the platform will be evaluated through actual muscle loading tests in vitro. The tests were run on three muscles (gastrocnemius lateralis, the rectus femoris, and the semitendinosus) around the knee joint and the results showed that the platform can accurately reproduce the magnitude of muscle strength (errors range from -6.2% to 1.81%) and changing pattern (goodness-of-fit range coefficient ranges from 0.00 to 0.06) of target muscle forces. The robustness of the platform is mainly manifested in that the platform can still accurately reproduce muscle force after changing the hardware combination. Additionally, the standard deviation of repeated test results is very small (standard ranges of hardware combination 1: 0.34 N~2.79 N vs. hardware combination 2: 0.68 N~2.93 N). Thus, the platform can stably and accurately reproduce muscle forces in vitro, and it has great potential to be applied in the future musculoskeletal loading system.

Rehabilitation Practitioners' Perceptions of Optimal Sitting and Standing Posture in Men with Normal Weight and Obesity.

The concepts of "optimal posture (OP)" and "harmful posture (HP)" are commonly used, and specific spinal postures can contribute to back pain. However, quantitative descriptions of optimal and harmful standing (StP) and sitting (SP) postures are currently lacking, particularly for different body mass indices (BMIs). Therefore, this study aimed to identify and quantify the OPs and HPs of StP and SP at different BMIs and investigate the attitudes and beliefs of rehabilitation practitioners toward OPs and HPs. Overall, 552 rehabilitation practitioners were recruited to participate in a questionnaire survey to select the optimal position from seven sitting and five standing postures for each BMI healthy volunteer. The segmental relationships of each posture were qualified using the Vicon software. For normal BMI, the physiotherapists chose two SPs (48.19% and 49.64%) and one StP (80.42%) as the OP. One sitting SP (83.7%) and two standing StPs (43.48% and 48.19%) were selected as optimal for obese BMI. All the most commonly selected OPs had an upright lordotic posture, while the postures with slouched spinal curves or forward head postures were almost all selected as HP. Additionally, 96.74% of participants considered education about optimal SP and StP to be "quite" or "very" important. The OP of the StP and SP postures was mostly based on the vertical alignment of gravity lines and sagittal balance. For obese people, the rehabilitation practitioners' observations may be erroneous, and further physical examination is necessary. Rehabilitation practitioners generally believe that postural education is essential in clinical practice.

Effect of different landing actions on knee joint biomechanics of female college athletes: Based on opensim simulation.

Background: The anterior cruciate ligament (ACL) is one of the most injurious parts of the knee in the biomechanical environment during landing actions. The purpose of this study was to compare the lower limb differences in movement patterns, muscle forces and ACL forces during drop landing (DL), drop vertical jump (DVJ) and forward vertical jump (FVJ). Methods: Eleven basketball and volleyball female college athletes (Division II and I) were recruited. Landing actions of DL, DVJ and FVJ, kinematics and dynamics data were collected synchronously using a motion capture system. OpenSim was used to calculate the ACL load, knee joint angle and moment, and muscle force. Results: At initial contact, different landing movements influenced knee flexion angle; DL action was significantly less than FVJ action (p = 0.046). Different landing actions affected quadriceps femoris forces; FVJ was significantly greater than DL and DVJ actions (p = 0.002 and p = 0.037, respectively). However, different landing movements had no significant effects on other variables (knee extension moment, knee valgus angle and moment, hamstring and gastrocnemius muscle forces, and ACL forces) (p > 0.050). Conclusion: There was no significant difference in the knee valgus, knee valgus moment, and the ACL forces between the three landing actions. However, knee flexion angle, knee extension moments sagittal factors, and quadriceps and gastrocnemius forces are critical factors for ACL injury. The DL action had a significantly smaller knee flexion angle, which may increase the risk of ACL injury, and not recommended to assess the risk of ACL injuries. The FVJ action had a larger knee flexion angle and higher quadriceps femoris forces that were more in line with daily training and competition needs. Therefore, it is recommended to use FVJ action in future studies on risk assessment of ACL injuries and injury prevention in female college athletes.

The midcortical-line is more reliable than the T-line in predicting stem anteversion in patients with developmental hip dysplasia after total hip arthroplasty.

Background: Precise preoperative planning improves postoperative outcomes in total hip arthroplasty (THA), especially in developmental dysplasia of the hip (DDH) cases. Previous studies used the T-line and midcortical-line as preoperative landmarks to predict postoperative stem anteversion (PSA). However, the most reliable landmark in predicting PSA in DDH patients remains unclear. To find the most reliable measurement to predict the PSA in DDH patients, this study compared the midcortical-line and T-line at different femoral neck levels. Methods: Pre- and postoperative Computed Tomography (CT) scans of 28 hips in 21 DDH patients who received THA were obtained for three-dimensional femoral models. The preoperative CT scan was used to measure the anteversion of the midcortical-line on the axial cross-sectional plane images (AM-CT), the anteversion of the midcortical-line from 3D models (AM-3D), and the T-line from 3D models (AT-3D) at simulated osteotomy planes at 5 and 10 mm heights proximal to the base of the lesser trochanter. The correlation between the preoperative femoral anteversion (AM-CT, AM-3D, AT-3D) and the PSA was assessed to evaluate the prediction accuracy. Results: The correlations between the AM-CT and the PSA were 0.86 (mean difference (MD) = 1.9°) and 0.92 (MD = -3.0°) at 5 and 10 mm heights, respectively. The correlation between the AM-3D and the PSA were 0.71 (MD = -11.6°) and 0.61 (MD = -12.9°) at 5 and 10 mm heights. The AT-3D was significantly greater (MD = 15.4°) than the PSA (p-value <0.01) at 5 mm cutting height, and the correlation between the AT-3D and the PSA was 0.57 (MD = 7.8°) at 10 mm cutting height. Conclusions: The AM-CT at the 10 mm height had the strongest correlation with the PSA and was more reliable in predicting the PSA when compared with the AM-3D and the AT-3D in DDH patients.

An Efficient Needleless Grasping Suture Technique for Graft Preparation in Anterior Cruciate Ligament Reconstruction.

Objective: Several needleless techniques have been developed to outcome the inherent disadvantages of the traditional needle stitching technique for graft preparation, such as tendon damage through the needle, time consumption, and the potential risk of needlestick injury. The purpose of the present study is to compare the graft preparation time and the biomechanical performance between an efficient needleless technique and the traditional needle stitching technique for graft preparation in anterior cruciate ligament reconstruction (ACLR). Methods: The time required to perform a complete suture on 20 hamstring tendons during ACLRs was measured. The grafts from one side were prepared using the needle stitching technique. The grafts from the other side used the needleless grasping suture technique. For the second part of the study, 12 fresh-frozen porcine flexor tendons were divided into two groups using two techniques and were mounted in an electric tensile test system. Each group was pretensioned to 100 N to simulate the maximum initial graft tension. The suturing state of sutures and graft (intact and damaged) and the load-elongation curve were recorded for each group. A Student's t-test was used to compare the means of the two groups. Results: In operation, the needleless grasping suture technique group (19.8 ± 4.8, range: 13.5-32.9 s) was significantly faster (p < 0.05) than the needle stitching technique group (52.7 ± 12.7, range: 36.0-87.5 s). The state of sutures in each group was intact. The mean elongation was 11.75 ± 1.38 (range: 9.47-12.99) mm and 10.59 ± 1.02 (range: 9.12-11.76) mm in the needleless stitching technique group and the needle grasping suture technique group, respectively. There was no statistically significant difference in the elongation between the two groups (p > 0.05). Conclusion: The needleless grasping suture technique was a convenient and efficient method for graft preparation in ACLR.

Influence of the Anteromedial Portal and Transtibial Drilling Technique on Femoral Tunnel Lengths in ACL Reconstruction: Results Using an MRI-Based Model.

Background: In anatomic anterior cruciate ligament (ACL) reconstruction, graft placement through the anteromedial (AM) portal technique requires more horizontal drilling of the femoral tunnel as compared with the transtibial (TT) technique, which may lead to a shorter femoral tunnel and affect graft-to-bone healing. The effect of coronal and sagittal femoral tunnel obliquity angle on femoral tunnel length has not been investigated. Purpose: To compare the length of the femoral tunnels created with the TT technique versus the AM portal technique at different coronal and sagittal obliquity angles using the native femoral ACL center as the starting point of the femoral tunnel. The authors also assessed sex-based differences in tunnel lengths. Study Design: Descriptive laboratory study. Methods: Magnetic resonance imaging scans of 95 knees with an ACL rupture (55 men, 40 women; mean age, 26 years [range, 16-45 years]) were used to create 3-dimensional models of the femur. The femoral tunnel was simulated on each model using the TT and AM portal techniques; for the latter, several coronal and sagittal obliquity angles were simulated (coronal, 30°, 45°, and 60°; sagittal, 45° and 60°), representing the 10:00, 10:30, and 11:00 clockface positions for the right knee. The length of the femoral tunnel was compared between the techniques and between male and female patients. Results: The mean ± SD femoral tunnel length with the TT technique was 40.0 ± 6.8 mm. A significantly shorter tunnel was created with the AM portal technique at 30° coronal/45° sagittal (35.5 ± 3.8 mm), whereas a longer tunnel was created at 60° coronal/60° sagittal (53.3 ± 5.3 mm; P < .05 for both). The femoral tunnel created with the AM portal technique at 45° coronal/45° sagittal (40.7 ± 4.8 mm) created a similar tunnel length as the TT technique. For all techniques, the femoral tunnel was significantly shorter in female patients than male patients. Conclusion: The coronal and sagittal obliquity angles of the femoral tunnel in ACL reconstruction can significantly affect its length. The femoral tunnel created with the AM portal technique at 45° coronal/45° sagittal was similar to that created with the TT technique. Clinical Relevance: Surgeons should be aware of the femoral tunnel shortening with lower coronal obliquity angles, especially in female patients.

Central femoral tunnel placement can reduce stress and strain around bone tunnels and graft more than anteromedial femoral tunnel in anterior cruciate ligament reconstruction.

The present study investigated the effects of anteromedial (AM) and central femoral footprint placement on stress and strain distribution around the femoral and tibial tunnel and graft following anterior cruciate ligament reconstruction (ACLR). A three-dimensional (3D) reconstructed knee model was validated and used for simulating ACLR by finite element analysis. A combined loading during normal human walking was applied to the knee models using different anatomic femoral tunnel placement at 20° knee flexion. The results of von Mises stress and principal strain at the entrances of the femoral and tibial tunnel and ACL graft was determined. The peak von Mises stress and the maximum principal strain in the AM footprint group were 8.78 MPa and 8850.89 µ-strain at the entrance of femoral tunnel, and 5.29 MPa and 5553.27 µ-strain at the entrance of tibial tunnel. The results in the AM footprint group were higher than that in the central footprint group. The peak von Mises stress around the ACL graft following AM footprint ACLR was 28.63 MPa, higher than that following the central footprint ACLR. The AM footprint ACLR generated more significant peak von Mises stress and maximum principal strain around the entrances of femoral and tibial tunnel and the graft than the central footprint. The present results are of clinical relevance as they can provide a better understanding of tunnel enlargement and graft failure.

The Femoral Tunnel Drilling Angle at 45° Coronal and 45° Sagittal Provided the Lowest Peak Stress and Strain on the Bone Tunnels and Anterior Cruciate Ligament Graft.

Purpose: The aims of this study were to 1) investigate the effects of femoral drilling angle in coronal and sagittal planes on the stress and strain distribution around the femoral and tibial tunnel entrance and the stress distribution on the graft, following anterior cruciate ligament reconstruction (ACLR), 2) identify the optimal femoral drilling angle to reduce the risk of the tunnel enlargement and graft failure. Methods: A validated three-dimensional (3D) finite element model of a healthy right cadaveric knee was used to simulate an anatomic ACLR with the anteromedial (AM) portal technique. Combined loading of 103.0 N anterior tibial load, 7.5 Nm internal rotation moment, and 6.9 Nm valgus moment during normal human walking at joint flexion of 20° was applied to the ACLR knee models using different tunnel angles (30°/45°/60° and 45°/60° in the coronal and sagittal planes, respectively). The distribution of von Mises stress and strain around the tunnel entrances and the graft was calculated and compared among the different finite element ACLR models with varying femoral drilling angles. Results: With an increasing coronal obliquity drilling angle (30° to 60°), the peak stress and maximum strain on the femoral and tibial tunnel decreased from 30° to 45° and increased from 45° to 60°, respectively. With an increasing sagittal obliquity drilling angle (45° to 60°), the peak stress and the maximum strain on the bone tunnels increased. The lowest peak stress and maximum strain at the ACL tunnels were observed at 45° coronal/45° sagittal drilling angle (7.5 MPa and 7,568.3 µ-strain at the femoral tunnel entrance, and 4.0 MPa and 4,128.7 µ-strain at the tibial tunnel entrance). The lowest peak stress on the ACL graft occurred at 45° coronal/45° sagittal (27.8 MPa) drilling angle. Conclusions: The femoral tunnel drilling angle could affect both the stress and strain distribution on the femoral tunnel, tibial tunnel, and graft. A femoral tunnel drilling angle of 45° coronal/ 45° sagittal demonstrated the lowest peak stress, maximum strain on the femoral and tibial tunnel entrance, and the lowest peak stress on the ACL graft.

High variability in anterior cruciate ligament femoral footprint: Implications for anatomical anterior cruciate ligament reconstruction.

BACKGROUND: The study aimed to (1) investigate the variability of the femoral ACL center in ACL-ruptured patients, (2) identify whether the currently available over-the-top femoral ACL guides could allow for anatomical reconstruction of the native ACL footprint. MATERIAL AND METHODS: Magnetic resonance images of 95 knees with an ACL rupture were used to create three-dimensional models of the femur. The femoral ACL footprint area was outlined on each model, and the location of the femoral ACL center was reported using an anatomical coordinate system. The distance of the femoral ACL center from the over-the-top position was measured. RESULTS: The femoral ACL center demonstrated a high intersubject variability ranging from 1.8 mm (9%) to 12.3 mm (60%) posterior and from 7.7 mm (37%) distal to 4.8 mm (23%) proximal using the posterior condyle circle reference. The average distance of the femoral ACL center from the over-the-top position was 1.9 ± 1.5 mm posterior and 13.8 ± 2.7 mm distal, respectively. The contemporary over-the-top femoral ACL aimers could restore the femoral ACL center in only 6.5% of the patients. CONCLUSIONS: The femoral ACL center demonstrated a high variation on its location, which resulted in a high intersubject variability from the over-the-top position. The contemporary over-the-top femoral tunnel guides do not provide sufficient offset to allow for an anatomical ACL reconstruction. Anteromedial-portal specific femoral ACL guides with a femoral offset ranging from 10 to 18 mm in the proximal/distal direction are required to restore the native ACL footprint.

The severity of developmental dysplasia of the hip does not correlate with the abnormality in pelvic incidence.

BACKGROUND: The purpose of this study was to investigate the association between the severity of Developmental dysplasia of the hip (DDH) and the abnormality in pelvic incidence (PI). METHODS: This was a retrospective study analyzing 53 DDH patients and 53 non-DDH age-matched controls. Computed tomography images were used to construct three-dimensional pelvic model. The Crowe classification was used to classify the severity of DDH. The midpoint of the femoral head centers and sacral endplates were projected to the sagittal plane of the pelvis. The PI was defined as the angle between a line perpendicular to the sacral plate at its midpoint and a line connecting this point to the axis of the femoral heads. Independent sample t-tests were used to compare the differences between the PI of DDH group and the non-DDH controls group. Kendall's coefficient of concordance was used to determine the correlation between the severity of DDH and PI. RESULTS: Patients with DDH had a significantly (p = 0.041) higher PI than the non-DDH controls (DDH 47.6 ± 8.2°, normal 44.2 ± 8.8°). Crowe type I patients had a significantly (p = 0.038) higher PI (48.2 ± 7.6°) than the non-DDH controls. No significant difference between the PI in Crowe type II or III patients and the PI in non-DDH controls were found (Crowe type II, 50.2 ± 9.6°, p = 0.073; Crowe type III, 43.8 ± 7.2°, p = 0.930). No correlation was found between the severity of DDH and the PI (r = 0.091, p = 0.222). CONCLUSIONS: No correlation was found between the severity of DDH and the PI. The study confirmed that the PI in DDH (Crowe type I) group was higher than that of the non-DDH control group, while the PI does not correlate with the severity of DDH.

Effect of altered proximal femoral geometry on predicting femoral stem anteversion in patients with developmental dysplasia of the hip.

BACKGROUND: The deformity of the proximal femur and acetabular in patients with developmental dysplasia of the hip (DDH) renders an intraoperative decision for ideal component placement challenging. We hypothesized that the altered morphology of calcar femorale (CF) in DDH patients changed the fixation mechanism of the cementless metaphyseal-filling stem and aimed to predict stem anteversion using proximal femoral anatomical parameters from preoperative CT. METHODS: Preoperative and postoperative CT scans of 34 DDHs with a metaphyseal-filling stem in THA were retrospectively analyzed. Proximal femoral anatomical parameters, including the femoral anteversion (FA) and the CF angles at the low femoral neck (LFN) and the center of the lesser trochanter (CLT) levels (FA-LFN, FA-CLT, CF-LFN, and CF-CLT) were measured. The dysplastic hips were divided into the CF group (n = 21) and the non-CF group (n = 13) according to the presence of the CF-LFN. The association between the anatomical parameters and the postoperative stem anteversion was statistically analyzed, and the predicted stem anteversion was compared with postoperative stem anteversion. RESULTS: In the CF group, the combination of the CF-LFN and FA-CLT exhibited a strong positive correlation (R = 0.870, p < 0.001) with the postoperative stem anteversion. In the non-CF group, only the FA-LFN had a strong positive correlation (R = 0.864, p < 0.001). Average prediction errors were 5.9° and 6.4° in the CF and non-CF groups. CONCLUSIONS: The presence of CF-LFN is related to the press-fit mechanism of the metaphyseal-filling stem, and the preoperative measurements from CT images can be employed as a tool to predict postoperative stem anteversion in DDH patients.

Relations between the Crowe classification and the 3D femoral head displacement in patients with developmental dysplasia of the hip.

BACKGROUND: The purpose of this study was to investigate the relationship between the three dimensional (3D) femoral head displacement in patients with developmental dysplasia of the hip (DDH) and Crowe classification. METHODS: Retrospectively, CT scans of 60 DDH patients and 55 healthy demography-matched healthy control subjects were analyzed. Using the anterior pelvic plane a pelvic anatomic coordinate system was established. The center coordinates of the femoral heads of both the DDH patients and control subjects were quantified relative to the pelvic coordinate system and were mapped proportionally to a representative normal pelvis for comparison. RESULTS: In the anteroposterior (AP) direction, the center of the femoral head was significantly more anterior in the DDH patients (type I, II, and III, respectively45.0 ± 5.5, 42.9 ± 7.1, and 43.9 ± 4.6 mm) when compared to the controls (50.0 ± 5.2 mm) (p < 0.001 for all). In the medial-lateral (ML) direction, the center of the femoral head was significantly more lateral in the DDH patients (type I, II, and III =103.5 ± 8.6, 101.5 ± 6.6, 102.1 ± 11.2 mm) when compared to the controls (87.5 ± 5.1 mm) (p < 0.001 for all). In the superior-inferior (SI) direction, the center of the femoral head was significantly more proximal in the DDH patients (type I, II, and III =62.4 ± 7.3, 50.0 ± 6.3, and 43.2 ± 6.6 mm) when compared to the controls (66.0 ± 6.2 mm) (p < 0.001 for all). CONCLUSIONS: The severity of DDH using the Crowe classification was related to the degree of the femoral head displacement in the SI direction, but not in the ML or AP directions. By assessing the 3D femoral head displacement in DDH patients, individualized component positioning might benefit surgical outcome.