Formation of Metal-Oxide Nanocomposites with Highly Dispersed Co Particles from a Co-Zr Powder Blend by Mechanical Alloying and Hydrogen Treatment.

The use of metal powders produced by mechanical treatment in various fields, such as catalysis or gas absorption, is often limited by the low specific surface area of the resulting particles. One of the possible solutions for increasing the particle fineness is hydrogen treatment; however, its effect on the structure of mechanically treated powders remains unexplored. In this work, for the first time, a metal-oxide nanocomposite powder was produced by mechanical alloying (MA) in a high-energy planetary ball mill from commercial powders of Zr and Co in the atomic ratio Co:Zr = 53:47 in an inert atmosphere, followed by high-pressure hydrogenation at room temperature. The initial powders and products of alloying and hydrogenation were studied by XRD, 59Co Internal Field NMR, SEM, and HRTEM microscopy with EDX mapping, as well as Raman spectroscopy. MA resulted in significant amorphization of the powders, as well as extensive oxidation of zirconium by water according to the so-called "Fukushima effect". Moreover, an increase in hcp Co sites was observed. 59Co IF NMR spectra revealed the formation of magnetically single-domain cobalt particles after hydrogenation. The crystallite sizes remained unchanged, which was not observed earlier. The pulverization of Co and an increase in hcp Co sites made this nanocomposite suitable for the synthesis of promising Fischer-Tropsch catalysts.

Doping magnesium hydroxide with sodium nitrate: a new approach to tune the dehydration reactivity of heat-storage materials.

Thermochemical energy storage (TES) provides a challenging approach for improving the efficiency of various energy systems. Magnesium hydroxide, Mg(OH)2, is known as a suitable material for TES at temperature T>300 °C. In this work, the thermal decomposition of Mg(OH)2 in the absence and presence of sodium nitrate (NaNO3) is investigated to adapt this material for TES at T<300 °C. The most notable observations described for the doped Mg(OH)2 are (1) a significant reduction of the decomposition temperature Td that allows tuning the dehydration reactivity by varying the NaNO3 content. The Td decrease by 25 °C is revealed at a salt content Y≤2.0 wt %. The maximum Td depression of some 50 °C is observed at Y=15-20 wt %; (2) the NaNO3-doped Mg(OH)2 decomposes considerably faster under conditions typical for closed TES cycles (at T>300 °C in vapor atmosphere) than a pure Mg(OH)2; (3) the morphology of the dehydration product (MgO) dramatically changes. Differential scanning calorimetry, high-resolution transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and vibrational spectroscopy (IR and Raman) are used to study the observed effects and to elucidate possible ways the NaNO3 influences the Mg(OH)2 dehydration and morphology of the dehydration product. The mechanism involving a chemical interaction between the salt and the hydroxide accompanied by nitrate embedding into brucite layers is discussed.

Iron tetrasulfophthalocyanine immobilized on metal organic framework MIL-101: synthesis, characterization and catalytic properties.

Iron tetrasulfophthalocyanine (FePcS) has been irreversibly inserted into nanocages of the metal organic framework MIL-101 to give a hybrid material FePcS/MIL-101 which demonstrated a superior catalytic performance in the selective oxidation of aromatic substrates with (t)BuOOH than homogeneous FePcS.

Hybrid polyoxotungstate/MIL-101 materials: synthesis, characterization, and catalysis of H2O2-based alkene epoxidation.

Polyoxotungstates [PW(4)O(24)](3-) (PW(4)) and [PW(12)O(40)](3-) (PW(12)) have been inserted into nanocages of the metal organic framework MIL-101. The hybrid materials PW(x)/MIL-101 (x = 4 or 12) containing 5-14 wt % of polyoxotungstate have been obtained and characterized by elemental analysis, N(2) adsorption, FT-IR, Raman, and (31)P NMR MAS spectroscopic techniques. Their catalytic performance was assessed in the selective oxidation of alkenes with aqueous hydrogen peroxide under mild reaction conditions ([H(2)O(2)] = 0.1-0.2 M, 50 degrees C, MeCN). PW(x)/MIL-101 enclosing 5 wt % of polyoxotungstate demonstrated fairly good catalytic activities in the epoxidation of various alkenes (3-carene, limonene, alpha-pinene, cyclohexene, cyclooctene, 1-octene), the turnover frequencies (TOF) and alkene conversions were close to the corresponding parameters achieved with homogeneous PW(x). For the oxidation of substrates with aromatic groups (styrene, cis- and trans-stilbenes), a higher level of olefin conversion was attained using PW(12)/MIL-101. Moreover, confinement of PW(12) within MIL-101 nanocages allowed us to reach higher epoxide selectivities at higher alkene conversions. The hybrid PW(x)/MIL-101 materials were stable to leaching, behaved as true heterogeneous catalysts, were easily recovered by filtration, and reused several times with the maintenance of the catalytic performance.