Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Acoust Soc Am ; 134(4): 2710-8, 2013 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-24116409

RESUMO

A pressure compensated metal diaphragm based fiber laser hydrophone configuration that can provide good sensitivity, large bandwidth, and sea state zero noise floor is proposed in this paper. A simplified theoretical model of the proposed sensor configuration is developed in which the acoustic elements of the sensor configuration are modeled using a four-pole acoustic transfer matrix and the structural elements are modeled as second order single degree of freedom elements. This model is then used to optimize the design parameters of the sensor system to achieve the performance objectives. An axisymmetric finite element analysis of the sensor configuration is also carried out to validate the results from the simplified theoretical model. Prototype sensors were fabricated and hydrostatic testing in a pressure vessel validated the static pressure compensation performance of the sensor. Frequency dependent sensitivity of the sensor system was measured through acoustic testing in a water tank. The prototype sensor gave a flat frequency response up to 5 kHz and experimental results compared well with theoretical predictions. The sensor has an acceleration rejection figure on the order of 0 dB ref 1 m/s(2) Pa and the pressure compensation approach worked reasonably well up to a hydrostatic pressures equivalent to a depth of 50 m.


Assuntos
Acústica/instrumentação , Tecnologia de Fibra Óptica/instrumentação , Lasers , Modelos Teóricos , Som , Transdutores de Pressão , Água , Simulação por Computador , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Elementos Finitos , Pressão Hidrostática , Teste de Materiais , Metais , Movimento (Física) , Análise Numérica Assistida por Computador , Reprodutibilidade dos Testes , Fatores de Tempo
2.
J Heart Valve Dis ; 14(2): 186-94, 2005 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-15792178

RESUMO

BACKGROUND AND AIM OF THE STUDY: Phonocardiography is a promising non-invasive diagnostic tool for the assessment of aortic stenosis (AS), and time-frequency representation is a potential tool to extract information from the phonocardiogram (PCG) signal. The study aim was to develop an acoustical method to predict the severity of AS. METHODS: Normalized continuous wavelet transform (NCWT) and fast Fourier Transform (FFT) were used to perform a spectral analysis of the PCG signal. A multi-peak detection algorithm was developed to determine the dominant frequency (DF) of systolic murmurs (SM). The spectral ratio of the SM, integration of the NCWT of SM (SI), and combined information of SM and second heart sound, were also calculated. RESULTS: The DF correlated best with the hemodynamic data: r = -0.72 with aortic valve (AV) area; r = 0.63 with maximal blood velocity through the AV; and r = 0.57 with mean pressure gradient across the AV. Based on DF and SI data, the study subjects (n = 59) were classified into three categories: severe AS; moderate AS; and other cases. The acoustical and echo classifications were in agreement in 50 subjects (85%). CONCLUSION: The acoustical method developed cannot predict accurately the severity of AS, but is valuable when conducting a screening classification before an invasive method is used.


Assuntos
Estenose da Valva Aórtica/diagnóstico , Fonocardiografia , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Valor Preditivo dos Testes , Índice de Gravidade de Doença
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...