Quasi-Solid-State Electrolyte Induced by Metallic MoS2 for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are a promising high-energy-density technology for next-generation energy storage but suffer from an inadequate lifespan. The poor cycle life of Li-S batteries stems from their commonly adopted catholyte-mediated operating mechanism, where the shuttling of dissolved polysulfides results in active material loss on the sulfur cathode and surface corrosion on the lithium anode. Here, we report in situ formation of a quasi-solid-state electrolyte (QSSE) on the metallic 1T phase molybdenum disulfide (MoS2) host that extends the lifetime of Li-S batteries. We find that the metallic 1T phase MoS2 host is able to initiate the ring-opening polymerization of 1,3-dioxolane (DOL), forming an integrated QSSE inside batteries. Nuclear magnetic resonance analysis reveals that the QSSE consists of ∼13% liquid DOL in a solid polymer matrix. The QSSE efficiently mediates sulfur redox reactions through dissolution-conversion chemistry while simultaneously suppressing polysulfide shuttling. Therefore, while ensuring high sulfur utilization, it avoids degradation of both electrodes, as well as the concomitant electrolyte consumption, leading to enhanced cycling stability. Under a practical lean electrolyte condition (electrolyte-to-sulfur ratio = 2 µL mg-1), Li-S pouch cell batteries with the QSSE demonstrate a capacity retention of 80.7% after 200 cycles, much superior to conventional liquid electrolyte cells that fail within 70 cycles. The QSSE also enables Li-S pouch cell batteries to operate across a wider temperature range (5 to 45 °C), together with improved safety under mechanical damage.

Room Temperature Negative Differential Resistance with High Peak Current in MoS2/WSe2 Heterostructures.

Two-dimensional transition metal dichalcogenide (2D TMD) semiconductors allow facile integration of p- and n-type materials without a lattice mismatch. Here, we demonstrate gate-tunable n- and p-type junctions based on vertical heterostructures of MoS2 and WSe2 using van der Waals (vdW) contacts. The p-n junction shows negative differential resistance (NDR) due to Fowler-Nordheim (F-N) tunneling through the triangular barrier formed by applying a global back-gate bias (VGS). We also show that the integration of hexagonal boron nitride (h-BN) as an insulating tunnel barrier between MoS2 and WSe2 leads to the formation of sharp band edges and unintentional inelastic tunnelling current. The devices based on vdW contacts, global VGS, and h-BN tunnel barriers exhibit NDR with a peak current (Ipeak) of 315 µA, suggesting that the approach may be useful for applications.

Metal Films on Two-Dimensional Materials: van der Waals Contacts and Raman Enhancement.

Electronic devices based on two-dimensional (2D) materials will need ultraclean and defect-free van der Waals (vdW) contacts with three-dimensional (3D) metals. It is therefore important to understand how vdW metal films deposit on 2D surfaces. Here, we study the growth and nucleation of vdW metal films of indium (In) and non-vdW metal films of gold (Au), deposited on 2D MoS2 and graphene. In follows a 2D growth mode in contrast to Au that follows a 3D growth mode. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to image the morphology of metal clusters during growth and quantify the nucleation density. As compared to Au, In atoms exhibit nearly 50 times higher diffusivity (3.65 × 10-6 µm-2 s-1) and half the nucleation density (64.9 ± 2.46 µm-2), leading to larger grain sizes (∼60 nm for 5 nm In on monolayer MoS2). The grain size of In can be further increased by reducing the 2D surface roughness, while the grain size for Au is limited by its high nucleation density due to the creation of interface defects during deposition. The vdW gap between In and MoS2 and graphene leads to strong enhancement (>103) in their Raman signal intensity due to localized surface plasmon resonance. In the absence of a vdW gap, the plasmon-mediated enhancement in Raman does not occur.

Phase-Engineered WS2 Monolayer Quantum Dots by Rhenium Doping.

Transition metal dichalcogenides (TMDs) occur in the thermodynamically stable trigonal prismatic (2H) phase or the metastable octahedral (1T) phase. Phase engineering of TMDs has proven to be a powerful tool for applications in energy storage devices as well as in electrocatalysis. However, the mechanism of the phase transition in TMDs and the synthesis of phase-controlled TMDs remain challenging. Here we report the synthesis of Re-doped WS2 monolayer quantum dots (MQDs) using a simple colloidal chemical process. We find that the incorporation of a small amount of electron-rich Re atoms in WS2 changes the metal-metal distance in the 2H phase initially, which introduces strain in the structure (strained 2H (S2H) phase). Increasing the concentration of Re atoms sequentially transforms the S2H phase into the 1T and 1T' phases to release the strain. In addition, we performed controlled experiments by doping MoS2 with Re to distinguish between Re and Mo atoms in scanning transmission electron microscopy images and quantified the concentration range of Re atoms in each phase of MoS2, indicating that phase engineering of WS2 or MoS2 is possible by doping with different amounts of Re atoms. We demonstrate that the 1T' WS2 MQDs with 49 at. % Re show superior catalytic performance (a low Tafel slope of 44 mV/dec, a low overpotential of 158 mV at a current density of 10 mA/cm2, and long-term durability up to 5000 cycles) for the hydrogen evolution reaction. Our findings provide understanding and control of the phase transitions in TMDs, which will allow for the efficient manufacturing and translation of phase-engineered TMDs.

Fatigue Response of MoS2 with Controlled Introduction of Atomic Vacancies.

Fatigue-induced failure resulting from repetitive stress-strain cycles is a critical concern in the development of robust and durable nanoelectromechanical devices founded on 2D semiconductors. Defects, such as vacancies and grain boundaries, inherent in scalable materials can act as stress concentrators and accelerate fatigue fracture. Here, we investigate MoS2 with controlled atomic vacancies, to elucidate its mechanical reliability and fatigue response as a function of atomic defect density. High-quality MoS2 demonstrates an exceptional fatigue response, enduring 109 cycles at 80% of its breaking strength (13.5 GPa), surpassing the fatigue resistance of steel and approaching that of graphene. The introduction of atomic defect densities akin to those generated during scalable synthesis processes (∼1012 cm-2) reduces the fatigue strength to half the breaking strength. Our findings also point toward a sudden defect reconfiguration prior to global failure as the primary fatigue mechanism, offering valuable insights into structure-property relationships.

Room-Temperature Photoluminescence Mediated by Sulfur Vacancies in 2D Molybdenum Disulfide.

Atomic defects in monolayer transition metal dichalcogenides (TMDs) such as chalcogen vacancies significantly affect their properties. In this work, we provide a reproducible and facile strategy to rationally induce chalcogen vacancies in monolayer MoS2 by annealing at 600 °C in an argon/hydrogen (95%/5%) atmosphere. Synchrotron X-ray photoelectron spectroscopy shows that a Mo 3d5/2 core peak at 230.1 eV emerges in the annealed MoS2 associated with nonstoichiometric MoSx (0 < x < 2), and Raman spectroscopy shows an enhancement of the ∼380 cm-1 peak that is attributed to sulfur vacancies. At sulfur vacancy densities of ∼1.8 × 1014 cm-2, we observe a defect peak at ∼1.72 eV (referred to as LXD) at room temperature in the photoluminescence (PL) spectrum. The LXD peak is attributed to excitons trapped at defect-induced in-gap states and is typically observed only at low temperatures (≤77 K). Time-resolved PL measurements reveal that the lifetime of defect-mediated LXD emission is longer than that of band edge excitons, both at room and low temperatures (∼2.44 ns at 8 K). The LXD peak can be suppressed by annealing the defective MoS2 in sulfur vapor, which indicates that it is possible to passivate the vacancies. Our results provide insights into how excitonic and defect-mediated PL emissions in MoS2 are influenced by sulfur vacancies at room and low temperatures.

Nanoscale Cathodoluminescence and Conductive Mode Scanning Electron Microscopy of van der Waals Heterostructures.

van der Waals heterostructures (vdW-HSs) integrate dissimilar materials to form complex devices. These rely on the manipulation of charges at multiple interfaces. However, at present, submicrometer variations in strain, doping, or electrical breakages may exist undetected within a device, adversely affecting macroscale performance. Here, we use conductive mode and cathodoluminescence scanning electron microscopy (CM-SEM and SEM-CL) to investigate these phenomena. As a model system, we use a monolayer WSe2 (1L-WSe2) encapsulated in hexagonal boron nitride (hBN). CM-SEM allows for quantification of the flow of electrons during the SEM measurements. During electron irradiation at 5 keV, up to 70% of beam electrons are deposited into the vdW-HS and can subsequently migrate to the 1L-WSe2. This accumulation of charge leads to dynamic doping of 1L-WSe2, reducing its CL efficiency by up to 30% over 30 s. By providing a path for excess electrons to leave the sample, near full restoration of the initial CL signal can be achieved. These results indicate that the trapping of charges in vdW-HSs during electron irradiation must be considered, in order to obtain and maintain optimal performance of vdW-HS devices during processes such as e-beam lithography or SEM. Thus, CM-SEM and SEM-CL form a toolkit through which nanoscale characterization of vdW-HS devices can be performed, allowing electrical and optical properties to be correlated.

Truly form-factor-free industrially scalable system integration for electronic textile architectures with multifunctional fiber devices.

An integrated textile electronic system is reported here, enabling a truly free form factor system via textile manufacturing integration of fiber-based electronic components. Intelligent and smart systems require freedom of form factor, unrestricted design, and unlimited scale. Initial attempts to develop conductive fibers and textile electronics failed to achieve reliable integration and performance required for industrial-scale manufacturing of technical textiles by standard weaving technologies. Here, we present a textile electronic system with functional one-dimensional devices, including fiber photodetectors (as an input device), fiber supercapacitors (as an energy storage device), fiber field-effect transistors (as an electronic driving device), and fiber quantum dot light-emitting diodes (as an output device). As a proof of concept applicable to smart homes, a textile electronic system composed of multiple functional fiber components is demonstrated, enabling luminance modulation and letter indication depending on sunlight intensity.

DFT Simulation-Based Design of 1T-MoS2 Cathode Hosts for Li-S Batteries and Experimental Evaluation.

The main challenge in lithium sulphur (Li-S) batteries is the shuttling of lithium polysulphides (LiPSs) caused by the rapid LiPSs migration to the anode and the slow reaction kinetics in the chain of LiPSs conversion. In this study, we explore 1T-MoS2 as a cathode host for Li-S batteries by examining the affinity of 1T-MoS2 substrates (pristine 1T-MoS2, defected 1T-MoS2 with one and two S vacancies) toward LiPSs and their electrocatalytic effects. Density functional theory (DFT) simulations are used to determine the adsorption energy of LiPSs to these substrates, the Gibbs free energy profiles for the reaction chain, and the preferred pathways and activation energies for the slow reaction stage from Li2S4 to Li2S. The obtained information highlights the potential benefit of a combination of 1T-MoS2 regions, without or with one and two sulphur vacancies, for an improved Li-S battery performance. The recommendation is implemented in a Li-S battery with areas of pristine 1T-MoS2 and some proportion of one and two S vacancies, exhibiting a capacity of 1190 mAh/g at 0.1C, with 97% capacity retention after 60 cycles in a schedule of different C-rates from 0.1C to 2C and back to 0.1C.

P-type electrical contacts for 2D transition-metal dichalcogenides.

Digital logic circuits are based on complementary pairs of n- and p-type field effect transistors (FETs) via complementary metal oxide semiconductor technology. In three-dimensional (3D) or bulk semiconductors, substitutional doping of acceptor or donor impurities is used to achieve p- and n-type FETs. However, the controllable p-type doping of low-dimensional semiconductors such as two-dimensional (2D) transition-metal dichalcogenides (TMDs) has proved to be challenging. Although it is possible to achieve high-quality, low-resistance n-type van der Waals (vdW) contacts on 2D TMDs1-5, obtaining p-type devices by evaporating high-work-function metals onto 2D TMDs has not been realized so far. Here we report high-performance p-type devices on single- and few-layered molybdenum disulfide and tungsten diselenide based on industry-compatible electron beam evaporation of high-work-function metals such as palladium and platinum. Using atomic resolution imaging and spectroscopy, we demonstrate near-ideal vdW interfaces without chemical interactions between the 2D TMDs and 3D metals. Electronic transport measurements reveal that the Fermi level is unpinned and p-type FETs based on vdW contacts exhibit low contact resistance of 3.3 kΩ µm, high mobility values of approximately 190 cm2 V-1 s-1 at room temperature, saturation currents in excess of 10-5 A µm-1 and an on/off ratio of 107. We also demonstrate an ultra-thin photovoltaic cell based on n- and p-type vdW contacts with an open circuit voltage of 0.6 V and a power conversion efficiency of 0.82%.

Epitaxial single-crystal hexagonal boron nitride multilayers on Ni (111).

Large-area single-crystal monolayers of two-dimensional (2D) materials such as graphene1-3, hexagonal boron nitride (hBN)4-6 and transition metal dichalcogenides7,8 have been grown. hBN is considered to be the 'ideal' dielectric for 2D-materials-based field-effect transistors (FETs), offering the potential for extending Moore's law9,10. Although hBN thicker than a monolayer is more desirable as substrate for 2D semiconductors11,12, highly uniform and single-crystal multilayer hBN growth has yet to be demonstrated. Here we report the epitaxial growth of wafer-scale single-crystal trilayer hBN by a chemical vapour deposition (CVD) method. Uniformly aligned hBN islands are found to grow on single-crystal Ni (111) at early stage and finally to coalesce into a single-crystal film. Cross-sectional transmission electron microscopy (TEM) results show that a Ni23B6 interlayer is formed (during cooling) between the single-crystal hBN film and Ni substrate by boron dissolution in Ni. There are epitaxial relationships between hBN and Ni23B6 and between Ni23B6 and Ni. We also find that the hBN film acts as a protective layer that remains intact during catalytic evolution of hydrogen, suggesting continuous single-crystal hBN. This hBN transferred onto the SiO2 (300 nm)/Si wafer acts as a dielectric layer to reduce electron doping from the SiO2 substrate in MoS2 FETs. Our results demonstrate high-quality single-crystal  multilayered hBN over large areas, which should open up new pathways for making it a ubiquitous substrate for 2D semiconductors.

Topological phase change transistors based on tellurium Weyl semiconductor.

Modern electronics demand transistors with extremely high performance and energy efficiency. Charge-based transistors with conventional semiconductors experience substantial heat dissipation because of carrier scattering. Here, we demonstrate low-loss topological phase change transistors (TPCTs) based on tellurium, a Weyl semiconductor. By modulating the energy separation between the Fermi level and the Weyl point of tellurium through electrostatic gate modulation, the device exhibits topological phase change between Weyl (Chern number ≠ 0) and conventional (Chern number = 0) semiconductors. In the Weyl ON state, the device has low-loss transport characteristics due to the global topology of gauge fields against external perturbations; the OFF state exhibits trivial charge transport in the conventional phase by moving the Fermi level into the bandgap. The TPCTs show a high ON/OFF ratio (108) at low operation voltage (≤2 volts) and high ON-state conductance (39 mS/µm). Our studies provide alternative strategies for realizing ultralow power electronics.

Ferroelectricity in untwisted heterobilayers of transition metal dichalcogenides.

Two-dimensional materials with out-of-plane (OOP) ferroelectric and piezoelectric properties are highly desirable for the realization of ultrathin ferro- and piezoelectronic devices. We demonstrate unexpected OOP ferroelectricity and piezoelectricity in untwisted, commensurate, and epitaxial MoS2/WS2 heterobilayers synthesized by scalable one-step chemical vapor deposition. We show d33 piezoelectric constants of 1.95 to 2.09 picometers per volt that are larger than the natural OOP piezoelectric constant of monolayer In2Se3 by a factor of ~6. We demonstrate the modulation of tunneling current by about three orders of magnitude in ferroelectric tunnel junction devices by changing the polarization state of MoS2/WS2 heterobilayers. Our results are consistent with density functional theory, which shows that both symmetry breaking and interlayer sliding give rise to the unexpected properties without the need for invoking twist angles or moiré domains.

Smart textile lighting/display system with multifunctional fibre devices for large scale smart home and IoT applications.

Smart textiles consist of discrete devices fabricated from-or incorporated onto-fibres. Despite the tremendous progress in smart textiles for lighting/display applications, a large scale approach for a smart display system with integrated multifunctional devices in traditional textile platforms has yet to be demonstrated. Here we report the realisation of a fully operational 46-inch smart textile lighting/display system consisting of RGB fibrous LEDs coupled with multifunctional fibre devices that are capable of wireless power transmission, touch sensing, photodetection, environmental/biosignal monitoring, and energy storage. The smart textile display system exhibits full freedom of form factors, including flexibility, bendability, and rollability as a vivid RGB lighting/grey-level-controlled full colour display apparatus with embedded fibre devices that are configured to provide external stimuli detection. Our systematic design and integration strategies are transformational and provide the foundation for realising highly functional smart lighting/display textiles over large area for revolutionary applications on smart homes and internet of things (IoT).

Recent Advances in Design of Electrocatalysts for High-Current-Density Water Splitting.

Electrochemical water splitting technology for producing "green hydrogen" is important for the global mission of carbon neutrality. Electrocatalysts with decent performance at high current densities play a central role in the industrial implementation of this technology. This field has advanced immensely in recent years, as witnessed by many types of catalysts designed and synthesized toward industriallyrelevant current densities (>200 mA cm-2 ). By discussing recent advances in this field, several key aspects are summarized that affect the catalytic performance for high-current-density electrocatalysis, including dimensionality of catalysts, surface chemistry, electron transport path, morphology, and catalyst-electrolyte interplay. The multiscale design strategy that considers these aspects comprehensively for developing high-current-density electrocatalysts are highlighted. The perspectives on the future directions in this emerging field are also put forward.

Recent developments in 2D transition metal dichalcogenides: phase transition and applications of the (quasi-)metallic phases.

The advent of two-dimensional transition metal dichalcogenides (2D-TMDs) has led to an extensive amount of interest amongst scientists and engineers alike and an intensive amount of research has brought about major breakthroughs in the electronic and optical properties of 2D materials. This in turn has generated considerable interest in novel device applications. With the polymorphic structural features of 2D-TMDs, this class of materials can exhibit both semiconducting and metallic (quasi-metallic) properties in their respective phases. This polymorphic property further increases the interest in 2D-TMDs both in fundamental research and for their potential utilization in novel high-performance device applications. In this review, we highlight the unique structural properties of few-layer and monolayer TMDs in the metallic 1T- and quasi-metallic 1T'-phases, and how these phases dictate their electronic and optical properties. An overview of the semiconducting-to-(quasi)-metallic phase transition of 2D-TMD systems will be covered along with a discussion on the phase transition mechanisms. The current development in the applications of (quasi)-metallic 2D-TMDs will be presented ranging from high-performance electronic and optoelectronic devices to energy storage, catalysis, piezoelectric and thermoelectric devices, and topological insulator and neuromorphic computing applications. We conclude our review by highlighting the challenges confronting the utilization of TMD-based systems and projecting the future developmental trends with an outlook of the progress needed to propel this exciting field forward.