Investigating the role of corrole as an excitation energy relay in light-induced processes in closely connected N,N'-bis(biphenyl-4-yl)aniline functionalized corrole donor-acceptor dyad.

A photosynthetic antenna-reaction center model, BBA-PFCor comprised of N,N'-bis(biphenyl-4-yl)aniline (BBA) covalently functionalized to bis(pentafluoro)corrole moiety has been prepared and the contribution of the BBA as the photoinduced energy transfer antenna was investigated. UV-visible studies have shown that integrating the electron-rich BBA chromophore into the corrole core has broadened the soret band of the corrole moiety with the absorption spanning from 300 to 700 nm. Electrochemical studies, in corroboration with the computational calculations, revealed that, BBA moiety can act as an electron reservoir and, in the excited state, it would transfer the excited energy to the corrole moiety in the dyad. Steady-state fluorescence studies have demonstrated that, upon photoexcitation of the BBA moiety of BBA-PFCor at 310 nm in solvents of varied polarity, the BBA emission centered at 400 nm was observed to be quenched, with the concomitant appearance of the corrole emission from 500 to 700 nm, indicating the happening of photoinduced energy transfer (PEnT) from 1BBA* to corrole moiety. Parallel control experiments involving the excitation of the corrole moiety at 410 nm did not result in the diminishing of the corrole emission, suggesting that the quenching of the BBA emission in BBA-PFCor is majorly due to intramolecular PEnT from 1BBA* to corrole moiety leading to the formation of singlet excited corrole, that is, 1BBA*-PFCor ➔ BBA-1PFCor*. The free energy changes of PEnT, ΔGEnT, were found to be thermodynamically feasible in all the solvents used for the study. Parallel time-resolved fluorescence studies were congruent with the steady-state fluorescence results and provided further evidence for the occurrence of ultrafast PEnT from 1BBA*➔corrole in the dyad with the rates of energy transfer (kEnT) of ~108 s-1.

Multichromophore Integrated Panchromatic Azaborondipyrromethenes: Synthesis, Characterization, and Exploring the Role of AzaBODIPY as an Energy and Electron Relay in Photoinduced Processes.

Panchromatic azaborondipyrromethenes directly connected with N,N-ditolylaniline (TPA) and naphthalene (Naph) at 1,7- and/or 3,5-positions of the azaBODIPY platform, 1, 2, and 3, were synthesized and the roles of the individual chromophore constituents in the photo-induced energy and electron transfer processes have been investigated. Optical absorption studies have indicated that integrating the complementary absorbers, naphthalene and TPA moieties, into the azaBODIPY core yielded broad-band capturing dyes with the absorption ranging from 250-1000 nm. Parallel electrochemical studies revealed that TPA moiety in 1 and 2 is easier to oxidize when compared to azaBODIPY moiety, which are in congruent with the computational studies indicating that TPA moiety would behave as an electron donor and azaBODIPY as an acceptor in PET processes. Steady-state fluorescence studies indicated that the photo-excitation of the TPA moiety in 2 resulted in the occurrence of PET from 1 TPA* to azaBODIPY generating (TPA)2 + ⋅-(azaBODIPY)- ⋅ while that of naphthalene in 3 resulted in PEnT from 1 (naphthalene)* to azaBODIPY forming (Naph)2 -1 (azaBODIPY)*. Interestingly, in 1, excitation of naphthalene moiety resulted in sequential PEnT from 1 (naphthalene)* to azaBODIPY followed by the PET from TPA to 1 (azaBODIPY)* generating a charge-separated state, (TPA)2 + ⋅-(azaBODIPY)- ⋅-(Naph)2 Fluorescence lifetime studies have indicated that the electron and energy transfer processes occurred in nanosecond time scales.

Phenothiazine functionalized fulleropyrrolidines: synthesis, charge transport and applications to organic solar cells.

A series of phenothiazine-C60/70 dyads containing fulleropyrrolidine tethered to C-3 position (C60-PTZ and C70-PTZ) or to the heteroatom N-position via either phenyl (C60-Ph-PTZ and C70-Ph-PTZ) or phenoxyethyl linkers (C60-PhOEt-PTZ and C70-PhOEt-PTZ) of the phenothiazine were synthesized and light-induced electron transfer events were explored. Optimized studies suggested that the highest molecular orbital (HOMO) resides on donor phenothiazine moiety while lowest molecular orbital (LUMO) on the acceptor fulleropyrrolidine moiety of the dyads. Optical and electrochemical properties suggested no electronic communication between the donor and acceptor moieties in the ground state. However, steady-state emission studies in solvents of varied polarity, involving selective excitation of C60/C70, disclosed that the emission intensity of C60/C70 was quenched in the dyads in the increasing order, C60/70-PTZ > C60/70-Ph-PTZ > C60/70-PhOEt-PTZ as a consequence of the donor-acceptor distance resulted due to spacer lengths. Also, the emission quenching is more pronounced in polar solvents such as DMF compared to a non-polar solvent, toluene. With the support of parallel electrochemical studies, the emission quenching is attributed to intramolecular photo-induced electron transfer occurring from PTZ to (C60/C70)* generating a radical ion pair, PTZ+⋅-C60-⋅/PTZ+⋅-C70-⋅. Finally, bulk heterojunction (BHJ) solar cells devices inverted fashion prepared by employing the dyads as acceptors, and PTB7 as donor, suggested that the devices prepared from C70 derivatives i.e., PTB7:C70-PTZ and PTB7:C70-PhOEt-PTZ exhibited better power conversion efficiency of 2.66% and 2.15%, respectively over C60 derivatives i.e., PTB7:C60-PTZ and PTB7:C60-PhOEt-PTZ with the efficiencies of 1.80 and 1.72%, respectively. AFM studies revealed that the poor performance of PTB7:C60-PTZ- and PTB7:C60-PhOEt-PTZ-based devices can be ascribed to the lower solubility of the dyads in 1,2-DCB solvent leading to rough morphology.

One-Photon Excitation Followed by a Three-Step Sequential Energy-Energy-Electron Transfer Leading to a Charge-Separated State in a Supramolecular Tetrad Featuring Benzothiazole-Boron-Dipyrromethene-Zinc Porphyrin-C60.

A panchromatic triad, consisting of benzothiazole (BTZ) and BF2 -chelated boron-dipyrromethene (BODIPY) moieties covalently linked to a zinc porphyrin (ZnP) core, has been synthesized and systematically characterized by using 1 H NMR spectroscopy, ESI-MS, UV-visible, steady-state fluorescence, electrochemical, and femtosecond transient absorption techniques. The absorption band of the triad, BTZ-BODIPY-ZnP, and dyads, BTZ-BODIPY and BODIPY-ZnP, along with the reference compounds BTZ-OMe, BODIPY-OMe, and ZnP-OMe exhibited characteristic bands corresponding to individual chromophores. Electrochemical measurements on BTZ-BODIPY-ZnP exhibited redox behavior similar to that of the reference compounds. Upon selective excitation of BTZ (≈290 nm) in the BTZ-BODIPY-ZnP triad, the fluorescence of the BTZ moiety is quenched, due to photoinduced energy transfer (PEnT) from 1 BTZ* to the BODIPY moiety, followed by quenching of the BODIPY emission due to sequential PEnT from the 1 BODIPY* moiety to ZnP, resulting in the appearance of the ZnP emission, indicating the occurrence of a two-step singlet-singlet energy transfer. Further, a supramolecular tetrad, BTZ-BODIPY-ZnP:ImC60 , was formed by axially coordinating the triad with imidazole-appended fulleropyrrolidine (ImC60 ), and parallel steady-state measurements displayed the diminished emission of ZnP, which clearly indicated the occurrence of photoinduced electron transfer (PET) from 1 ZnP* to ImC60 . Finally, femtosecond transient absorption spectral studies provided evidence for the sequential occurrence of PEnT and PET events, namely, 1 BTZ* -BODIPY-ZnP:ImC60 →BTZ-1 BODIPY* -ZnP:ImC60 →BTZ-BODIPY-1 ZnP* :ImC60 →BTZ-BODIPY-ZnP.+ :ImC60 .- in the supramolecular tetrad. The evaluated rate of energy transfer, kEnT , was found to be 3-5×1010  s-1 , which was slightly faster than that observed in the case of BODIPY-ZnP and BTZ-BODIPY-ZnP, lacking the coordinated ImC60 . The rate constants for charge separation and recombination, kCS and kCR , respectively, calculated by monitoring the rise and decay of C60 .- were found to be 5.5×1010 and 4.4×108  s-1 , respectively, for the BODIPY-ZnP:ImC60 triad, and 3.1×1010 and 4.9×108  s-1 , respectively, for the BTZ-BODIPY-ZnP:ImC60 tetrad. Initial excitation of the tetrad, promoting two-step energy transfer and a final electron-transfer event, has been successfully demonstrated in the present study.

Excitation-Wavelength-Dependent Light-Induced Electron Transfer and Twisted Intramolecular Charge Transfer in N,N-Bis(4'-tert-butylbiphenyl-4-yl)aniline Functionalized Borondipyrromethenes.

A series of bis(4'-tert-butylbiphenyl-4-yl)aniline (BBA) functionalized borondipyrromethene (BODIPY) dyads, Dyads 1-3, containing the BBA group tethered to BODIPY moiety either directly or through a phenyl or alkynyl phenyl spacers are synthesized, and the light-mediated charge transfer within the chromophores has been systematically investigated. The crystal structure of Dyad-1 showed a tilt of 44.2° between the BODIPY and BBA molecular planes and intermolecular C-H···π interactions with these moieties. Cyclic voltammetric and computational studies showed that the BBA moiety can act as the electron donor (D) and BODIPY as the electron acceptor (A) and the optical absorption studies revealed that an increase in the conjugation of the linker from Dyad-1 to Dyad-2 resulted in bathochromic shifts. Steady-state fluorescence studies involving photoexcitation of the BBA moiety at 326 nm resulted in the decrease in fluorescence intensity of the BBA, indicating the possibility of sequential occurrence of faster photoinduced energy transfer (PEnT) followed by the photoinduced electron transfer (PET) or solely PET within the dyads, and the driving forces of the charge separation were calculated to be exothermic in all of the employed solvents. Parallel time-resolved fluorescence experiments involving the excitation of BBA moiety also supported the occurrence of charge separation in these dyads. Interestingly, excitation of the BODIPY moiety of Dyad-1 and Dyad-2 at 490 nm in solvents of increasing polarity leads to a red-shifted BODIPY emission with weakened intensity. This spectral behavior indicated the occurrence of emission from the locally excited (LE) state in nonpolar solvents, whereas formation of an LE state followed by the rotation of the chromophores at the D-A bond leads to a low energy twisted intramolecular charge transfer state (TICT), resulting in a charge-separated state BBA+•-BODIPY-• in polar solvents. Furthermore, the hydrophobicity studies involving the solutions of dyads in admixtures of polar tetrahydrofuran (THF) and nonpolar hexanes revealed that when the fraction of hexanes in these mixtures is increased, the emission of BODIPY moiety was observed to be blue-shifted and exhibited enhanced intensity supporting the occurrence of TICT in these dyads.

Electron-Withdrawing Boron Dipyrromethene Dyes As Visible Light Absorber/Sensitizers on Semiconductor Oxide Surfaces.

The synthesis, characterization, and electrochemical and photophysical properties of the phosphonate-derivatized carbazole (CBZ) and boron dipyrromethene (BODIPY) chromophores in the dyes, BODIPY(CBZ)2PO3H2 (8) and BODIPY(Tol)2PO3H2 (7), are described. The oxide-bound dyes have been explored as light absorbers in dye-sensitized photoelectrosynthesis cell (DSPEC) applications. The BODIPY-CBZ phosphonate ester (6) features a broad, intense UV-visible absorption spectrum with absorptions at 297 and 650 nm that arise from mixed transitions at the CBZ and BODIPY units. Electrochemical measurements on BODIPY(CBZ)2Br (4) in 0.1 M [nBu4N][PF6] in dichloromethane, vs normal hydrogen electrode (NHE), reveal reversible oxidations at 1.19 and 1.41 V and a reversible reduction at -0.59 V. On indium tin oxide (ITO) and TiO2, a reversible one-electron oxidation appears for 7 at 0.86 and 0.90 V vs NHE in dichloromethane, respectively, which demonstrates the redox stability on metal oxide surfaces. The results of nanosecond transient absorption measurements on SnO2/TiO2 electrodes provide direct evidence for excited-state electron injection into the conduction band of TiO2 following 590 nm excitation. A longer lifetime for 8+ compared to 7+ is consistent with extensive intramolecular charge separation between the CBZ and BODIPY units on the surface. Photoelectrochemical studies on 8 on a SnO2/TiO2 photoanode resulted in sustained photocurrents with current maxima of ∼200 µA/cm2 with hydroquinone added as a reductant under 1 sun (AM1.5 100 mW·cm-2) illumination at pH 4.5 in 0.1 M acetate buffer and 0.4 M LiClO4. On mixed SnO2/TiO2 electrode surfaces, with the added catalyst [Ru(Mebimpy)((4,4'-(OH)2PO-CH2)2bpy)(OH2)]2+ and chromophores 7 and 8, addition of 0.1 M benzyl alcohol resulted in sustained photocurrents of 12 and 35 µA/cm2, consistent with oxidation to benzaldehyde.

Phosphorylation of TSC2 by PKC-δ reveals a novel signaling pathway that couples protein synthesis to mTORC1 activity.

Downstream of insulin-like growth factor receptor, the TSC1/2/ TCB1D7 (tuberous sclerosis complex) and mTOR (mechanistic target of rapamycin) pathways are implicated in many human diseases, including cancer and diabetes. Targeting this pathway is currently an important approach for palliating or eradicating cancer. Downstream of mTOR, translational machinery targeting holds great promise for anticancer drug development. Therefore, we investigated whether the protein synthesis machinery that is regulated by mTORC1 (mTOR complex 1) signaling can in turn regulate mTORC1 activity. We found that inhibition of protein synthesis results in rapid activation of mTORC1 signaling, thereby uncovering a feedback loop between mTOR and the translation machinery. This mTORC1 activation requires tuberous sclerosis complex (TSC) but is independent of AKT. In addition, by using a PKC-δ (protein kinase c delta)-specific inhibitor and PKC-δ siRNA knockdown, we found that PKC-δ kinase activity is required for mTORC1 activation in response to translation inhibitors. Furthermore, translation inhibition activates PKC-δ. Subsequently, we investigated whether PKC-δ can phosphorylate and inactivate TSC1/2, leading to mTORC1 activation. In vitro kinase assays showed direct phosphorylation of TSC2 (S932 and S939) by PKC-δ, which was confirmed by mass spectrometry. In vivo kinase analysis further indicated that both S932 and S939 are phosphorylated in response to translation inhibitors. Finally, phosphorylation defective TSC2 mutants (S932A and S939A single mutants and a S932A/S939A double mutant) failed to upregulate mTORC1 activity in the presence of translation inhibitors, suggesting that activation of mTORC1 by translation inhibitors is mediated by PKC-δ phosphorylation of TSC2 at S932/S939, which inactivates TSC.

Excitation-dependent electron exchange energy and electron transfer dynamics in a series of covalently tethered N,N-bis(4'-tert-butylbiphenyl-4-yl)aniline - [C60] fullerene dyads via varying π-conjugated spacers.

Femtosecond time-resolved fluorescence and transient absorption studies are reported for three newly synthesized covalently linked N,N-bis(4'-tert-butylbiphenyl-4-yl)aniline (BBA) and pyrrolidinofullerenes (C60)-based donor-π conjugated bridge-acceptor dyads (D-B-A) as functions of the bridge length (7.1, 9.5 and 11.2 Å for Dyad-1, Dyad-2 and Dyad-3), dielectric constants of the medium and pump wavelengths. In polar solvent, ultrafast fluorescence quenching (kEET ≥ 2 × 1012 s-1) of the BBA moiety upon excitation of the BBA moiety (320 nm) is observed in the dyads and is assigned to a mechanism involving electron exchange energy transfer (EET) from 1BBA* to C60 followed by electron transfer from BBA to 1C60*. Cohesive rise and decay dynamics of conjugated BBA˙+-C60˙- anion pairs confirm the involvement of a distance independent adiabatic charge-separation (CS) process (kCS ≥ 2.2 × 1011 s-1) with near unity quantum efficiency (φCS ≥ 99.7%) and a distance-dependent non-adiabatic charge-recombination (CR) process [kCR ∼ (1010-108) s-1]. In contrast, excitation of the C60 moiety (λex = 430 to 700 nm) illustrates photoinduced electron transfer from BBA to 1C60*, involving non-adiabatic (diabatic) and distance-dependent CS (kCS in the range of 0.59-1.78 × 1011 s-1) with 98.86-99.6% (Dyad-3-Dyad-1) quantum efficiency and a CR process with kCR values [kCR ∼ (1010-108) s-1] up to three orders greater than kCS of the respective dyads. Both the processes, CS and CR, upon C60 excitation and the CR process upon BBA excitation show distance dependent rate constants with exponential factor ß ≤ 0.5 Å-1, and electron transfer is concluded to occur through a covalently linked conjugated π bridge. Global and target analysis of fsTA data reveal the occurrence of two closely lying CS states, thermally hot (CShot) and thermally relaxed (CSeq) states, and two CR processes with two orders of different rate constants. Careful analysis of the kinetic and thermodynamic data allowed us to estimate the total reorganization energy and electronic coupling matrix (V), which decrease exponentially with distance. These novel features of the distance independent adiabatic CS process and the distance-dependent diabatic CR process upon donor excitation are due to extending the π-conjugation between BBA and C60. The demonstrated results may provide a benchmark in the design of light-harvesting molecular devices where ultrafast CS processes and long-lived CS states are essential requirements.

Hypochlorite-Mediated Modulation of Photoinduced Electron Transfer in a Phenothiazine-Boron dipyrromethene Electron Donor-Acceptor Dyad: A Highly Water Soluble "Turn-On" Fluorescent Probe for Hypochlorite.

A highly water-soluble phenothiazine (PTZ)-boron dipyrromethene (BODIPY)-based electron donor-acceptor dyad (WS-Probe), which contains BODIPY as the signaling antennae and PTZ as the OCl- reactive group, was designed and used as a fluorescent chemosensor for the detection of OCl- . Upon addition of incremental amounts of NaOCl, the quenched fluorescence of WS-Probe was enhanced drastically, which indicated the inhibition of reductive photoinduced electron transfer (PET) from PTZ to 1 BODIPY*; the detection limit was calculated to be 26.7 nm. Selectivity studies with various reactive oxygen species, cations, and anions revealed that WS-Probe was able to detect OCl- selectively. Steady-state fluorescence studies performed at varied pH suggested that WS-Probe can detect NaOCl and exhibits maximum fluorescence in the pH range of 7 to 8, similar to physiological conditions. ESI-MS analysis and 1 H NMR spectroscopy titrations showed the formation of sulfoxide as the major oxidized product upon addition of hypochlorite. More interestingly, when WS-Probe was treated with real water samples, the fluorescence response was clearly visible with tap water and disinfectant, which indicated the presence of OCl- in these samples. The in vitro cell viability assay performed with human embryonic kidney 293 (HEK 293) cells suggested that WS-probe is non-toxic up to 10 µm and implicates the use of the probe for biological applications.

Direct determination of small RNAs using a biotinylated polythiophene impedimetric genosensor.

Herein, direct determination of small RNAs is described using a functional-polymer modified genosensor. The analytical strategy adopted involves deposition by electropolymerization of biotinylated polythiophene films on the surface of miniaturized, disposable, gold screen-printed electrodes, followed by the layer-by-layer deposition of streptavidin, and then biotynilated capture probes. A small RNA (miR-221) target was determined via the impedimetric measurement of the hybridization event in a label-free and PCR-free approach. Under optimized conditions, the limit of detection (LOD) was 0.7 pM miR-221 (15% RSD). The genosensor was applied for determination of miR-221 in total RNA extracted from human lung and breast cancer cell lines, discriminating between the cancer-positive and -negative cells, without any amplification step, in less than 2h.

Piezomicrogravimetric and impedimetric oligonucleotide biosensors using conducting polymers of biotinylated bis(2,2'-bithien-5-yl)methane as recognition units.

A new conducting polymer of biotinylated bis(2,2'-bithien-5-yl)methane was prepared and applied as the recognition unit of two different biosensors for selective oligonucleotide determination using either electrochemical impedance spectroscopy (EIS) or piezoelectric microgravimetry (PM) for label-free analytical signal transduction. For preparation of this unit, first, a biotinylated bis(2,2'-bithien-5-yl)methane functional monomer was designed and synthesized. Then, this monomer was potentiodynamically polymerized to form films on the surface of a glassy carbon electrode (GCE) and a Au electrode of a quartz crystal resonator (QCR) for the EIS and PM transduction, respectively. On top of these films, neutravidin was irreversibly immobilized by complexing the biotin moieties of the polymer. Finally, recognizing biotinylated oligonucleotide was attached by complexing the surface-immobilized neutravidin. This layer-by-layer assembling of the poly(thiophene-biotin)-neutravidin-(biotin-oligonucleotide) recognition film served to determine the target oligonucleotide via complementary nucleobase pairing. Under optimized determination conditions, the target oligonucleotide limit of detection (LOD) was 0.5 pM and 50 nM for the EIS and PM transduction, respectively. The sensor response to the target oligonucleotide was linear with respect to logarithm of the target oligonucleotide concentration in a wide range of 0.5 pM to 30 µM and with respect to its concentration in the range of 50 to 600 nM for the EIS and PM transduction, respectively. The biosensors were appreciably selective with respect to the nucleobase mismatched oligonucleotides.

A molecular light-driven water oxidation catalyst.

Two mononuclear Ru(II) complexes, [Ru(ttbt)(pynap)(I)]I and [Ru(tpy)(Mepy)(2)(I)]I (tpy = 2,2';6,2"-terpyridine; ttbt = 4,4',4"-tri-tert-butyltpy; pynap = 2-(pyrid-2'-yl)-1,8-naphthyridine; and Mepy = 4-methylpyridine), are effective catalysts for the oxidation of water. This oxidation can be driven by a blue (λ(max) = 472 nm) LED light source using [Ru(bpy)(3)]Cl(2) (bpy = 2,2'-bipyridine) as the photosensitizer. Sodium persulfate acts as a sacrificial electron acceptor to oxidize the photosensitizer that in turn drives the catalysis. The presence of all four components, light, photosensitizer, sodium persulfate, and catalyst, are required for water oxidation. A dyad assembly has been prepared using a pyrazine-based linker to join a photosensitizer and catalyst moiety. Irradiation of this intramolecular system with blue light produces oxygen with a higher turnover number than the analogous intermolecular component system under the same conditions.

Effect of axially projected oligothiophene pendants and nitro-functionalized diimine ligands on the lowest excited state in cationic Ir(III) bis-cyclometalates.

The novel terthiophene (3T) oligomer 6 and a series of cationic Ir(III) bis-cyclometalates [Ir(C^N)(2)(N^N)]PF(6) 9-12 were prepared. The synthesis, characterization, electrochemical, and photophysical properties are reported. The cyclometalating ligands (C^N) are 2-phenylpyridinato (ppy) or the 3T oligomer (3T-ppy), asymmetrically capped in the 5 and 5" positions with the ppy and mesityl groups. The diimine ligands (N^N) are 2,2'-bipyridine (bpy) or 4-NO(2)-bipyridine (4-NO(2)-bpy). Hybrid metal-organic complexes 11 and 12 bear 3T-pendants ligated through the ppy cap, 10 and 12 contain NO(2) functionalized diimines, whereas 9 contains neither. Structural characterization of 10 by single crystal X-ray diffraction confirms the presence of the NO(2) substituent and pseudo-octahedral coordination geometry about the Ir(III) ion. Cyclic voltammetry highlights the large electron withdrawing effect of the NO(2) substituent, providing an 850 mV shift toward lower potentials for the first diimine centered reduction of 10 and 12. Strong overlap of the intense π → π* absorptions of the 3T-pendants with Ir(III) charge transfer bands is evident in complexes of 11 and 12, precluding the possibility for selective excitation of either chromophore. Photoexcitation (λ(ex) = 400 nm) of the series affords strong luminescence from the 3T oligomer 6 and the unsubstituted 9, with φ(em) = 0.11. In stark contrast the NO(2) and 3T functionalized complexes 10-12 display near total quenching of luminescence. Computations of the ground and excited state electronic structure using density functional theory (DFT) and time-dependent DFT (TD-DFT) indicate that both the NO(2) and 3T substituents play an important role in excited state deactivation of complexes 10-12. A substantial electronic contribution of the NO(2) substituent results in stabilization of the diimine based molecular orbital (MO) and offers an efficient nonradiative decay pathway for the excited state. Spin-orbit coupling effects of the Ir(III) ion lead to efficient population of the low lying, nonluminescent, triplet states centered on the 3T-pendants.

Further observations on water oxidation catalyzed by mononuclear Ru(II) complexes.

A family of 28 mononuclear Ru(II) complexes have been prepared and characterized by (1)H NMR, electronic absorption, and cyclic voltammetry. These complexes are studied as catalysts for water oxidation. All the catalysts possess one tridentate ligand, closely related to 2,2';6,2''-terpyridine (tpy) and may be divided into two basic types. In the type-1 catalyst, the three remaining coordination sites are occupied by a bidentate closely related to 2,2'-bipyridine (bpy) and a monodentate halogen (Br, Cl, or I) or water molecule. In the type-2 catalyst, the three remaining coordination sites are occupied by two axial 4-picoline molecules and an equatorial halogen or water. In general the type-2 catalysts are more reactive than the type-1. The type-2 iodo-catalyst shows first-order behavior and, unlike the bromo- and chloro-catalysts, does not require water-halogen exchange to show good activity. The importance of steric strain and hindrance around the metal center is examined. The introduction of three t-butyl groups at the 4, 4', and 4'' positions of tpy sometimes improves catalyst activity, but the effect does not appear to be additive.

(S)-(-)-1-Phenyl-ethanaminium 4-(4,4-di-fluoro-1,3,5,7-tetra-methyl-3a,4a-diaza-4-borata-s-indacen-8-yl)benzoate.

The title compound, C(8)H(12)N(+)·C(20)H(18)BF(2)N(2)O(2) (-), crystallizes with a significant amount of void space [4.0 (5)%] in the unit cell. The structure displays N-H⋯O hydrogen bonding between the components. The plane formed by the benzoic acid moiety of the BODIPY-CO(2) (-) is twisted by 80.71 (6)° relative to the plane formed by the ring C and N atoms of the tetramethyldipyrrin portion of the molecule.

Protein arginine methyltransferase Prmt5-Mep50 methylates histones H2A and H4 and the histone chaperone nucleoplasmin in Xenopus laevis eggs.

Histone proteins carry information contained in post-translational modifications. Eukaryotic cells utilize this histone code to regulate the usage of the underlying DNA. In the maturing oocytes and eggs of the frog Xenopus laevis, histones are synthesized in bulk in preparation for deposition during the rapid early developmental cell cycles. During this key developmental time frame, embryonic pluripotent chromatin is established. In the egg, non-chromatin-bound histones are complexed with storage chaperone proteins, including nucleoplasmin. Here we describe the identification and characterization of a complex of the protein arginine methyltransferase 5 (Prmt5) and the methylosome protein 50 (Mep50) isolated from Xenopus eggs that specifically methylates predeposition histones H2A/H2A.X-F and H4 and the histone chaperone nucleoplasmin on a conserved motif (GRGXK). We demonstrate that nucleoplasmin (Npm), an exceedingly abundant maternally deposited protein, is a potent substrate for Prmt5-Mep50 and is monomethylated and symmetrically dimethylated at Arg-187. Furthermore, Npm modulates Prmt5-Mep50 activity directed toward histones, consistent with a regulatory role for Npm in vivo. We show that H2A and nucleoplasmin methylation appears late in oogenesis and is most abundant in the laid egg. We hypothesize that these very abundant arginine methylations are constrained to pre-mid blastula transition events in the embryo and therefore may be involved in the global transcriptional repression found in this developmental time frame.

Diameter-sorted SWCNT-porphyrin and SWCNT-phthalocyanine conjugates for light-energy harvesting.

A non-covalent double-decker binding strategy is employed to construct functional supramolecular single-wall carbon nanotubes (SWCNT)-tetrapyrrole hybrids capable of undergoing photoinduced electron transfer and performing direct conversion of light into electricity. To accomplish this, two semiconducting SWCNTs of different diameters (6,5 and 7,6) were modified via π-π stacking of pyrene functionalized with an alkyl ammonium cation (PyrNH(3)(+)). Such modified nanotubes were subsequently assembled via dipole-cation binding of zinc porphyrin with one (1) or four benzo-18-crown-6 cavities (2) or phthalocyanine with four benzo-18-crown-6 cavities at the ring periphery (3), employed as visible-light photosensitizers. Upon charactering the conjugates using TEM and optical techniques, electron transfer via photoexcited zinc porphyrin and phthalocyanine was investigated using time-resolved emission and transient absorption techniques. Higher charge-separation efficiency is established for SWCNT(7,6) with a narrow band gap than the thin SWCNT(6,5) with a wide band gap. Photoelectrochemical studies using FTO/SnO(2) electrodes modified with these donor-acceptor conjugates unanimously demonstrated the ability of these conjugates to convert light energy into electricity. The photocurrent generation followed the trend observed for charge separation, that is, incident-photon-to-current efficiency (IPCE) of a maximum of 12 % is achieved for photocells with FTO/SnO(2)/SWCNT(7,6)/PyrNH(3)(+):1.

Tuning electron transfer rates via systematic shifts in the acceptor state density using size-selected ZnO colloids.

We report direct measurements of the influence of the available density of acceptor states on the rate of near-barrierless electron transfer between a dye sensitizer and an oxide semiconductor. The electron donor was the excited state of a zinc porphyrin, and the acceptors were a series of size-selected ZnO nanocrystals. The available density of states was tuned by controlling the relative position of the ZnO band edge using quantum confinement. The resulting change in the rate was consistent with a simple model of the state density as a function of energy above the ZnO band edge.

Molecularly imprinted polymer (MIP) based piezoelectric microgravimetry chemosensor for selective determination of adenine.

An adenine-templated molecularly imprinted polymer (MIP) film, deposited on a poly(bithiophene) barrier film, served as the recognition element of a piezomicrogravimetric (acoustic) chemosensor. A 10MHz AT-cut shear-thickness-mode bulk-acoustic-wave quartz crystal resonator with Pt film electrodes was used as the signal transducer. Adenine electrooxidation was prevented by the barrier film. The MIP film was deposited by electrochemical co-polymerization of two functional monomers of bis(bithiophene) derivatives, bearing either the 18-crown-6 or dioxaborinane substituent, in the presence of the adenine template. A strong base solution was then used to extract the template. Completeness of the template removal was substantiated by the UV-vis, XPS, DPV, and EIS measurements. The chemosensor performance was evaluated with the piezoelectric microgravimetry detection at QCM under FIA conditions using a carrier acetonitrile-water (1:1, v:v) mixed solvent solution. The linear dynamic concentration range extended from at least 0.1 to 1mM for the 35 microL/min flow rate, and 100 microL volume of the injected adenine solution. The chemosensor selectivity allowed for discrimination of the adenine analyte from structurally and functionally related interferants, such as 2-aminopurine, guanine, and ascorbic acid. The determined from the FIA kinetic studies stability constant of the MIP-adenine complex, (18+/-2.4)x10(4)M(-1), was much higher than that of the MIP-(2-aminopurine), (650+/-90)M(-1), MIP-guanine, (122+/-11)M(-1), and MIP-(ascorbic acid), (92+/-10)M(-1), complexes. The concentration limit of detection was as low as 5 nM adenine for the 35 microL/min flow rate, and 1 mL volume of the injected sample solution.

Global analysis of TDP-43 interacting proteins reveals strong association with RNA splicing and translation machinery.

TDP-43 is a highly conserved and ubiquitously expressed member of the heterogeneous nuclear ribonucleoprotein (hnRNP) family of proteins. Recently, TDP-43 was shown to be a major disease protein in the ubiquitinated inclusions characteristic of most cases of amyotrophic lateral sclerosis (ALS), tau-negative frontotemporal lobar degeneration (FTLD), and inclusion body myopathy. In these diseases, TDP-43 is redistributed from its predominantly nuclear location to ubiquitin-positive, cytoplasmic foci. The extent to which TDP-43 drives pathophysiology is unknown, but the identification of mutations in TDP-43 in familial forms of ALS and FTLD-U suggests an important role for this protein in pathogenesis. Little is known about TDP-43 function and only a few TDP-43 interacting proteins have been previously identified, which makes further insight into both the normal and pathological functions of TDP-43 difficult. Here we show, via a global proteomic approach, that TDP-43 has extensive interaction with proteins that regulate RNA metabolism. Some interactions with TDP-43 were found to be dependent on RNA-binding, whereas other interactions are RNA-independent. Disease-causing mutations in TDP-43 (A315T and M337V) do not alter its interaction profile. TDP-43 interacting proteins largely cluster into two distinct interaction networks, a nuclear/splicing cluster and a cytoplasmic/translation cluster, strongly suggesting that TDP-43 has multiple roles in RNA metabolism and functions in both the nucleus and the cytoplasm. Finally, we found numerous TDP-43 interactors that are known components of stress granules, and indeed, we find that TDP-43 is also recruited to stress granules.