Enhancing ToF-SIMS OLED Data Analysis with Neural Networks and Mathematical Spectral Mixing.

This study presents a method employing artificial neural networks (ANN) for automated interpretation and depth profiling of organic multilayers using a limited set of time-of-flight secondary ion mass spectrometry (ToF-SIMS) spectra. To overcome the challenges of acquiring massive data sets for OLEDs, training data was generated by combining existing ToF-SIMS data sets with mathematically generated spectra. The classification model achieved an impressive 99.9% accuracy in identifying the mixed layers of the OLED dyes. The study demonstrates the synergy of ToF-SIMS and ANN analysis for effective classification and depth profiling of the OLED layers, providing valuable insights for the development and optimization of organic electronic devices.

TOF-SIMS Analysis Using Bi3 + as Primary Ions on Au Nanoparticles Supported by SiO2/Si: Providing Insight into Metal-Support Interactions.

Au nanoparticles with a mean diameter of 20 nm with a coverage of ∼20% of the surface were distributed on a Si wafer surface and studied both before and after being annealed (at 100 and 300 °C). The two types of samples were analyzed using secondary ion mass spectroscopy (SIMS) with Bi3 + clusters as the primary ions combined with surface etching using Ar1000 + clusters. We observed a substantial difference in the SIMS spectra combined with a relatively short sputtering time of Ar1000 +. In the nonannealed samples, bare Au cluster cations and Si+ were observed in the SIMS spectra; AuSi+ clusters were also observed in the annealed samples. These results indicate Au-silicide formation at a part of the periphery of the Au nanoparticles upon annealing. We suggest that SIMS experiments using cluster ions such as Bi3 + can not only be used for surface elemental analyses but also provide information on local chemical environments of elements on the surface. This is an important issue in heterogeneous catalysis (e.g., strong metal-support interactions). We also advise that one should be careful interpreting the SIMS data combined with a longer Ar1000 + sputtering time because this can deteriorate the surfaces from their original structures.

Photo-induced linkage isomerization in the gas phase probed by tandem ion mobility and laser spectroscopy.

Ruthenium complexes involving sulfoxide ligands can undergo linkage isomerization upon light absorption, accompanied by dramatic changes in their optical properties. These remarkable photochromic properties are sensitive to the nature of the ligand as well as to that of the solvent. We used tandem ion mobility spectrometry coupled to mass spectrometry to gain direct experimental insight into the isomerization pathways connecting the different linkage isomers of an isolated ruthenium complex with two dimethyl-sulfoxide ligands. We find that the isomerization behavior of the solvent-free complex differs from that previously reported in the solution-phase, which is in line with recent theoretical predictions.

Electronic Circular Dichroism Spectroscopy of Jet-Cooled Phenylalanine and Its Hydrated Clusters.

We obtained resonant two-photon ionization circular dichroism (R2PICD) spectra of jet-cooled phenylalanine (Phe) and its hydrated clusters (Phe(H2O)n, n = 1-2) near the origin band of the S0-S1 transition. The R2PICD spectra of Phe exhibit well-resolved CD bands of six different conformers present in the jet, which vary in sign and magnitude depending on their conformations. We revised the previous structural assignments of the Phe conformers based on the comparison between the experimental and theoretical CD signs, infrared spectra, and rotational band contours. The R2PICD spectra of Phe(H2O)n reveal that hydration with one or two water molecule(s) does not affect the CD signs of Phe conformers but significantly increases their CD magnitudes. Furthermore, conformational selection by solvation alters relative populations of Phe conformers, leading to a sign inversion in the CD spectra of Phe(H2O)n compared with that of Phe monomer.

Development of Wien filter for small ion gun of surface analysis.

The gas cluster ion beam (GCIB) and liquid metal ion beam have been studied in the context of ion beam usage for analytical equipment in applications such as X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). In particular, small ion sources are used for the secondary ion generation and ion etching. To set the context to this study, the SIMS project has been launched to develop ion-gun based analytical equipment for the Korea Basic Science Institute. The objective of the first stage of the project is the generation of argon beams with a GCIB system [A. Kirkpatrick, Nucl. Instrum. Methods Phys. Res., Sect. B 206, 830-837 (2003)] that consists of a nozzle, skimmer, ionizer, acceleration tube, separation system, transport system, and target. The Wien filter directs the selected cluster beam to the target system by exploiting the velocity difference of the generated particles from GCIB. In this paper, we present the theoretical modeling and three-dimensional electromagnetic analysis of the Wien filter, which can separate Ar(+) 2500 clusters from Ar(+) 2400 to Ar(+) 2600 clusters with a 1-mm collimator.

Fluorescence-detected circular dichroism spectroscopy of jet-cooled ephedrine.

The resonant two-photon ionization circular dichroism (R2PICD) spectrum represents the cumulative circular dichroism (CD) of one-photon excitation and the subsequent one-photon ionization, whereas the fluorescence-detected circular dichroism (FDCD) spectra exhibit only the CD of one-photon excitation, similar to conventional CD spectra. We obtained the FDCD spectra of jet-cooled ephedrine (EPD) near the origin band of the S0-S1 transition to measure the CD of one-photon absorption and thus the CD of the ionization process in R2PI in comparison with the R2PICD spectra. The CD effects of the ionization following excitation of the A (0-0) and C (930 cm(-1)) bands in the spectrum are small, whereas those of the B band (530 cm(-1)) are anomalously large, leading to opposite CD signs for the FDCD and R2PICD spectra. Based on the intermediate state-selective fragmentation patterns in the R2PI spectra, this large CD effect is attributed to the state-selective isomerization that occurs after excitation of the B band. By comparing the experimental and theoretical spectra, we determined that the B band corresponds to an asymmetric ring distortion mode that involves torsional motions of the side chain, which may facilitate the isomerization process. This study demonstrates that FDCD spectroscopy combined with R2PICD spectroscopy provides a powerful tool to measure the CD effects of the excitation and ionization processes separately in R2PI and thus probe the structural changes that occur during the ionization process following excitation to an intermediate state.

First signal from a broadband cryogenic preamplifier cooled by circulating liquid nitrogen in a 7 T Fourier transform ion cyclotron resonance mass spectrometer.

Despite the outstanding performance of Fourier transform ion cyclotron/mass spectrometry (FTICR/MS), the complexity of the cellular proteome or natural compounds presents considerable challenges. Sensitivity is a key performance parameter of a FTICR mass spectrometer. By improving this parameter, the dynamic range of the instrument can be increased to improve the detection signal of low-abundance compounds or fragment ion peaks. In order to improve sensitivity, a cryogenic detection system was developed by the KBSI (Korean Basic Science Institute) in collaboration with Stahl-Electronics (Mettenheim, Germany). A simple, efficient liquid circulation cooling system was designed and a cryogenic preamplifier implemented inside a FTICR mass spectrometer. This cooling system circulates a cryoliquid from a Dewar to the "liquid circulation unit" through a CF flange to cool a copper block and a cryopreamplifier; the cooling medium is subsequently exhausted into the air. The cryopreamplifier can be operated over a very wide temperature range, from room temperature to low temperature environments (4.2 K). First, ion signals detected by the cryopreamplifier using a circulating liquid nitrogen cooling system were observed and showed a signal-to-noise ratio (S/N) about 130% better than that obtained at room temperature.

Mechanisms behind the generation of protonated ions for polyaromatic hydrocarbons by atmospheric pressure photoionization.

In this study, the mechanism behind the generation of protonated polyaromatic hydrocarbon (PAH) ions without heteroatoms by atmospheric pressure photoionization (APPI) is investigated. Comparing data obtained by APPI of anthracene dissolved either in toluene or perdeuterated toluene suggests that toluene acts as a source of protons and that breakage of C-H bonds in the toluene molecule is important for the overall protonation reaction. Our data describing an Arrhenius-type temperature-dependent relationship between the signal intensities of molecular and protonated ions suggest a mechanistic relation between the generated molecular and protonated ions. The APPI protonation mechanism that best explains the observed phenomena is composed of two reactions: electron transfer followed by hydrogen transfer. This two-step mechanism for APPI was originally suggested by Syage (Syage, J. A. J. Am. Soc. Mass Spectrom. 2004, 15 , 1521-1533). Further quantum mechanical study shows that an energetically favorable ion-molecular complex can be generated as a result of electron transfer from toluene to PAH, which subsequently facilitates hydrogen transfer. This suggests that both electron transfer and hydrogen transfer can occur as a "concerted" reaction through the ion-molecular complex precursor state, which is consistent with experimental results. To our best knowledge, this is the first time that the dynamic nature of the APPI process is clearly revealed by combined experimental and quantum mechanical studies.

Installation of a fast framing visible camera on KSTAR.

Visible camera technologies have made remarkable progress in recent years, and the fast camera has proven itself to be a capable imaging diagnostic in studies of specific fusion plasma issues such as the start-up physics, plasma wall interactions, edge-localized modes, and disruptions. For the purpose of favorable visible imaging, a fast framing camera has recently been installed on the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The camera uses a complementary metal-oxide semiconductor detector with a maximum resolution of 1280x1024 at 1000 frames/s (fps) and a minimum resolution of 1280x16 at 64 kfps. A 2-m-long viewport having a novel optical rail system was installed on a tangential port to view the tokamak interior. The system is fully controlled from the main control room and protected by a shutter from deposits. To verify that the camera electronics are safe from the high magnetic field and its rapid time variation, possible influences are considered theoretically and experimentally. In this work, we present the design and installation of the fast camera system on the KSTAR device with discussions on the field variation effect issues.

The 'hybrid cell': a new compensated infinity cell for larger radius ion excitation in Fourier transform ion cyclotron resonance mass spectrometry.

A new 'hybrid' ion cyclotron resonance (ICR) trap is proposed and analyzed by computer simulations. The trap is basically a hybrid of a segmented end cap (Infinity) and capacitively coupled cylindrical cell, with additional electrodes placed at the center of each end cap. The new trap produces an on-axis electric field z-profile similar to that of the Infinity cell or capacitively coupled open cylindrical cell during ion excitation. Simion simulations demonstrate that, during detection, appropriate changes of the potentials applied to the two new sets of electrodes produce a radial electric field z-profile that more closely approaches that for an ideal axial three-dimensional quadrupolar potential at high post-excitation ICR orbital radius, for improved signal-to-noise ratio and resolving power, and minimal m/z-discrimination.

Modification of trapping potential by inverted sidekick electrode voltage during detection to extend time-domain signal duration for significantly enhanced fourier transform ion cyclotron resonance mass resolution.

Applying an inverted voltage to the "sidekick" electrodes during ion cyclotron resonance detection improves both Fourier transform ion cyclotron resonance (FT-ICR) mass spectral signal-to-noise ratio (at fixed resolving power) and resolving power (at fixed signal-to-noise ratio). The time-domain signal duration increases by up to a factor of 2. The method has been applied to 7-T FT-ICR MS of electrosprayed positive ions from substance P and human growth hormone protein ( approximately 22 000 Da, m/Deltam50% 200 000), without the need for pulsed cooling gas inside the ICR trap. The modification can be easily adapted to any FT-ICR instrument equipped with sidekick electrodes. The present effects are shown to be comparable to electron field modification by injection of an electron beam during ICR detection, reported by Kaiser and Bruce (Kaiser, N. K.; Bruce, J. E. Anal. Chem. 2005, 77, 5973-5981.). Although the exact mechanism is not fully understood, computer simulations show that a flattening of the radial potential gradient along the magnetic field direction in the ICR trap may contribute to the effects. This study not only provides a way to enhance the quality of FT-ICR mass spectra but also offers insight into understanding of ion motions inside an ICR ion trap.