Facile Lithium Densification Kinetics by Hyperporous/Hybrid Conductor for High-Energy-Density Lithium Metal Batteries.

Lithium metal anode (LMA) emerges as a promising candidate for lithium (Li)-based battery chemistries with high-energy-density. However, inhomogeneous charge distribution from the unbalanced ion/electron transport causes dendritic Li deposition, leading to "dead Li" and parasitic reactions, particularly at high Li utilization ratios (low negative/positive ratios in full cells). Herein, an innovative LMA structural model deploying a hyperporous/hybrid conductive architecture is proposed on single-walled carbon nanotube film (HCA/C), fabricated through a nonsolvent induced phase separation process. This design integrates ionic polymers with conductive carbon, offering a substantial improvement over traditional metal current collectors by reducing the weight of LMA and enabling high-energy-density batteries. The HCA/C promotes uniform lithium deposition even under rapid charging (up to 5 mA cm-2) owing to its efficient mixed ion/electron conduction pathways. Thus, the HCA/C demonstrates stable cycling for 200 cycles with a low negative/positive ratio of 1.0 when paired with a LiNi0.8Co0.1Mn0.1O2 cathode (areal capacity of 5.0 mAh cm-2). Furthermore, a stacked pouch-type full cell using HCA/C realizes a high energy density of 344 Wh kg-1 cell/951 Wh L-1 cell based on the total mass of the cell, exceeding previously reported pouch-type full cells. This work paves the way for LMA development in high-energy-density Li metal batteries.

Electrolyte Design for High-Voltage Lithium-Metal Batteries with Synthetic Sulfonamide-Based Solvent and Electrochemically Active Additives.

Considering practical viability, Li-metal battery electrolytes should be formulated by tuning solvent composition similar to electrolyte systems for Li-ion batteries to enable the facile salt-dissociation, ion-conduction, and introduction of sacrificial additives for building stable electrode-electrolyte interfaces. Although 1,2-dimethoxyethane with a high-donor number enables the implementation of ionic compounds as effective interface modifiers, its ubiquitous usage is limited by its low-oxidation durability and high-volatility. Regulation of the solvation structure and construction of well-structured interfacial layers ensure the potential strength of electrolytes in both Li-metal and LiNi0.8Co0.1Mn0.1O2 (NCM811). This study reports the build-up of multilayer solid-electrolyte interphase by utilizing different electron-accepting tendencies of lithium difluoro(bisoxalato) phosphate (LiDFBP), lithium nitrate, and synthetic 1-((trifluoromethyl)sulfonyl)piperidine. Furthermore, a well-structured cathode-electrolyte interface from LiDFBP effectively addresses the issues with NCM811. The developed electrolyte based on a framework of highly- and weakly-solvating solvents with interface modifiers enables the operation of Li|NCM811 cells with a high areal capacity cathode (4.3 mAh cm-2) at 4.4 V versus Li/Li+.

Compositionally Sequenced Interfacial Layers for High-Energy Li-Metal Batteries.

Electrolyte additives with multiple functions enable the interfacial engineering of Li-metal batteries (LMBs). Owing to their unique reduction behavior, additives exhibit a high potential for electrode surface modification that increases the reversibility of Li-metal anodes by enabling the development of a hierarchical solid electrolyte interphase (SEI). This study confirms that an adequately designed SEI facilitates the homogeneous supply of Li+, nonlocalized Li deposition, and low electrolyte degradation in LMBs while enduring the volume fluctuation of Li-metal anodes on cycling. An in-depth analysis of interfacial engineering mechanisms reveals that multilayered SEI structures comprising mechanically robust LiF-rich species, electron-rich P-O species, and elastic polymeric species enabled the stable charge and discharge of LMBs. The polymeric outer SEI layer in the as-fabricated multilayered SEI could accommodate the volume fluctuation of Li-metal anodes, significantly enhancing the cycling stability Li||LiNi0.8Co0.1Mn0.1O2 full cells with an electrolyte amount of 3.6 g Ah-1 and an areal capacity of 3.2 mAh cm-2. Therefore, this study confirms the ability of interfacial layers formed by electrolyte additives and fluorinated solvents to advance the performance of LMBs and can open new frontiers in the fabrication of high-performance LMBs through electrolyte-formulation engineering.

Correction: Liquid electrolyte chemistries for solid electrolyte interphase construction on silicon and lithium-metal anodes.

[This corrects the article DOI: 10.1039/D3SC03514J.].

Liquid electrolyte chemistries for solid electrolyte interphase construction on silicon and lithium-metal anodes.

Next-generation battery development necessitates the coevolution of liquid electrolyte and electrode chemistries, as their erroneous combinations lead to battery failure. In this regard, priority should be given to the alleviation of the volumetric stress experienced by silicon and lithium-metal anodes during cycling and the mitigation of other problems hindering their commercialization. This review summarizes the advances in sacrificial compound-based volumetric stress-adaptable interfacial engineering, which has primarily driven the development of liquid electrolytes for high-performance lithium batteries. Besides, we discuss how the regulation of lithium-ion solvation structures helps expand the range of electrolyte formulations and thus enhance the quality of solid electrolyte interphases (SEIs), improve lithium-ion desolvation kinetics, and realize longer-lasting SEIs on high-capacity anodes. The presented insights are expected to inspire the design and synthesis of next-generation electrolyte materials and accelerate the development of advanced electrode materials for industrial battery applications.

Weakly coordinated Li ion in single-ion-conductor-based composite enabling low electrolyte content Li-metal batteries.

The pulverization of lithium metal electrodes during cycling recently has been suppressed through various techniques, but the issue of irreversible consumption of the electrolyte remains a critical challenge, hindering the progress of energy-dense lithium metal batteries. Here, we design a single-ion-conductor-based composite layer on the lithium metal electrode, which significantly reduces the liquid electrolyte loss via adjusting the solvation environment of moving Li+ in the layer. A Li||Ni0.5Mn0.3Co0.2O2 pouch cell with a thin lithium metal (N/P of 2.15), high loading cathode (21.5 mg cm-2), and carbonate electrolyte achieves 400 cycles at the electrolyte to capacity ratio of 2.15 g Ah-1 (2.44 g Ah-1 including mass of composite layer) or 100 cycles at 1.28 g Ah-1 (1.57 g Ah-1 including mass of composite layer) under a stack pressure of 280 kPa (0.2 C charge with a constant voltage charge at 4.3 V to 0.05 C and 1.0 C discharge within a voltage window of 4.3 V to 3.0 V). The rational design of the single-ion-conductor-based composite layer demonstrated in this work provides a way forward for constructing energy-dense rechargeable lithium metal batteries with minimal electrolyte content.

A Phosphorofluoridate-Based Multifunctional Electrolyte Additive Enables Long Cycling of High-Energy Lithium-Ion Batteries.

Ni-rich layered oxides are regarded as key components for realizing post Li-ion batteries (LIBs). However, high-valence Ni, which acts as an oxidant in deeply delithiated states, aggravates the oxidation of the electrolyte at the cathode, causing cell impedance to increase. Additionally, the leaching of transition metal (TM) ions from Ni-rich cathodes by acidic compounds such as Brønsted-acidic HF produced through LiPF6 hydrolysis aggravates the structural instability of the cathode and renders the electrode-electrolyte interface unstable. Herein, we present a multifunctional electrolyte additive, bis(trimethylsilyl) phosphorofluoridate (BTSPFA), to attain enhanced interfacial stability of graphite anodes and Ni-rich cathodes in Li-ion cells. BTSPFA eliminates the corrosive HF molecules by cleaving silyl ether bonds and enables the formation of a polar P-O- and P-F-enriched cathode electrolyte interface (CEI) on the Ni-rich cathode. It also promotes the creation of a solid electrolyte interphase composed of inorganic-rich species, which suppresses the reduction of the electrolyte during battery operation. The synergistic effect of the HF scavenging ability of BTSPFA and the stable BTSPFA-promoted CEI effectively suppresses the TM leaching from the Ni-rich cathode while also preventing unwanted TM deposition on the anode. LiNi0.8Co0.1Mn0.1O2/graphite full cells with 1 wt % BTSPFA exhibited an enhanced discharge capacity retention of 79.8% after 500 cycles at 1C and 45 °C. These unique features of BTSPFA are useful for resolving the interfacial deterioration issue of high-capacity Ni-rich cathodes paired with graphite anodes.

Acid- and Gas-Scavenging Electrolyte Additive Improving the Electrochemical Reversibility of Ni-Rich Cathodes in Li-Ion Batteries.

In view of their high theoretical capacities, nickel-rich layered oxides are promising cathode materials for high-energy Li-ion batteries. However, the practical applications of these oxides are hindered by transition metal dissolution, microcracking, and gas/reactive compound formation due to the undesired reactions of residual lithium species. Herein, we show that the interfacial degradation of the LiNi0.9CoxMnyAlzO2 (NCMA, x + y + z = 0.1) cathode and the graphite (Gr) anode of a representative Li-ion battery by HF can be hindered by supplementing the electrolyte with tert-butyldimethylsilyl glycidyl ether (tBS-GE). The silyl ether moiety of tBS-GE scavenges HF and PF5, thus stabilizing the interfacial layers on both electrodes, while the epoxide moiety reacts with CO2 released by the parasitic reaction between HF and Li2CO3 on the NCMA surface to afford cyclic carbonates and thus suppresses battery swelling. NCMA/Gr full cells fabricated by supplementing the baseline electrolyte with 0.1 wt % tBS-GE feature an increased capacity retention of 85.5% and deliver a high discharge capacity of 162.9 mAh/g after 500 cycles at 1 C and 25 °C. Thus, our results reveal that the molecular aspect-based design of electrolyte additives can be efficiently used to eliminate reactive species and gas components from Li-ion batteries and increase their performance.

Ni-Ion-Chelating Strategy for Mitigating the Deterioration of Li-Ion Batteries with Nickel-Rich Cathodes.

Ni-rich cathodes are the most promising candidates for realizing high-energy-density Li-ion batteries. However, the high-valence Ni4+ ions formed in highly delithiated states are prone to reduction to lower valence states, such as Ni3+ and Ni2+ , which may cause lattice oxygen loss, cation mixing, and Ni ion dissolution. Further, LiPF6 , a key salt in commercialized electrolytes, undergoes hydrolysis to produce acidic compounds, which accelerate Ni-ion dissolution and the interfacial deterioration of the Ni-rich cathode. Dissolved Ni ions migrate and deposit on the surface of the graphite anode, causing continuous electrolyte decomposition and threatening battery safety by forming Li dendrites on the anode. Herein, 1,2-bis(diphenylphosphino)ethane (DPPE) chelates Ni ions dissolved from the Ni-rich cathode using bidentate phosphine moieties and alleviates LiPF6 hydrolysis via complexation with PF5 . Further, DPPE reduces the generation of corrosive HF and HPO2 F2 substantially compared to the amounts observed using trimethyl phosphite and tris(trimethylsilyl) phosphite, which are HF-scavenging additives. Li-ion cells with Ni-rich cathodes and graphite anodes containing DPPE exhibit remarkable discharge capacity retentions of 83.4%, with high Coulombic efficiencies of >99.99% after 300 cycles at 45 °C. The results of this study will promote the development of electrolyte additives.

Replacing conventional battery electrolyte additives with dioxolone derivatives for high-energy-density lithium-ion batteries.

Solid electrolyte interphases generated using electrolyte additives are key for anode-electrolyte interactions and for enhancing the lithium-ion battery lifespan. Classical solid electrolyte interphase additives, such as vinylene carbonate and fluoroethylene carbonate, have limited potential for simultaneously achieving a long lifespan and fast chargeability in high-energy-density lithium-ion batteries (LIBs). Here we report a next-generation synthetic additive approach that allows to form a highly stable electrode-electrolyte interface architecture from fluorinated and silylated electrolyte additives; it endures the lithiation-induced volume expansion of Si-embedded anodes and provides ion channels for facile Li-ion transport while protecting the Ni-rich LiNi0.8Co0.1Mn0.1O2 cathodes. The retrosynthetically designed solid electrolyte interphase-forming additives, 5-methyl-4-((trifluoromethoxy)methyl)-1,3-dioxol-2-one and 5-methyl-4-((trimethylsilyloxy)methyl)-1,3-dioxol-2-one, provide spatial flexibility to the vinylene carbonate-derived solid electrolyte interphase via polymeric propagation with the vinyl group of vinylene carbonate. The interface architecture from the synthesized vinylene carbonate-type additive enables high-energy-density LIBs with 81.5% capacity retention after 400 cycles at 1 C and fast charging capability (1.9% capacity fading after 100 cycles at 3 C).

Unanticipated Mechanism of the Trimethylsilyl Motif in Electrolyte Additives on Nickel-Rich Cathodes in Lithium-Ion Batteries.

The introduction of a trimethylsilyl (TMS) motif in electrolyte additives for lithium-ion batteries is regarded as an effectual approach to remove corrosive hydrofluoric acid (HF) that structurally and compositionally damages the electrode-electrolyte interface and gives rise to transition metal dissolution from the cathode. Herein, we present that electrolyte additives with TMS moieties lead to continued capacity loss of polycrystalline (PC)-LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes coupled with graphite anodes compared to additives without TMS as the cycle progresses. Through a comparative study using electrolyte additives with and without TMS moieties, it is revealed that the TMS group is prone to react with residual lithium compounds, in particular, lithium hydroxide (LiOH) on the PC-NCM811 cathode, and the resulting TMS-OH triggers the decomposition of PF5 created by the autocatalytic decomposition of LiPF6 that generates reactive species, namely, HF and POF3. This work aims to offer a way to build favorable interface structures for Ni-rich cathodes covered with residual lithium compounds through a study to figure out the roles of TMS moieties of electrolyte additives.

In Situ Interfacial Tuning To Obtain High-Performance Nickel-Rich Cathodes in Lithium Metal Batteries.

Nickel-rich layered oxides are currently considered the most practical candidates for realizing high-energy-density lithium metal batteries (LMBs) because of their relatively high capacities. However, undesired nickel-rich cathode-electrolyte interactions hinder their applicability. Here, we report a satisfactory combination of an antioxidant fluorinated ether solvent and an ionic additive that can form a stable, robust interfacial structure on the nickel-rich cathode in ether-based electrolytes. The fluorinated ether 1,1,2,2-tetrafluoroethyl-1H,1H,5H-octafluoropentyl ether (TFOFE) introduced as a cosolvent into ether-based electrolytes stabilizes the electrolytes against oxidation at the LiNi0.8Mn0.1Co0.1O2 (NCM811) cathode while simultaneously preserving the electrochemical performance of the Li metal anode. Lithium difluoro(bisoxalato)phosphate (LiDFBP) forms a uniform cathode-electrolyte interphase that limits the generation of microcracks inside secondary particles and undesired dissolution of transition metal ions such as nickel, cobalt, and manganese from the cathode into the electrolyte. Using TFOFE and LiDFBP in ether-based electrolytes provides an excellent capacity retention of 94.5% in a Li|NCM811 cell after 100 cycles and enables the delivery of significantly increased capacity at high charge and discharge rates by manipulating the interfaces of both electrodes. This research provides insights into advancing electrolyte technologies to resolve the interfacial instability of nickel-rich cathodes in LMBs.

Dual-Functional Electrolyte Additives toward Long-Cycling Lithium-Ion Batteries: Ecofriendly Designed Carbonate Derivatives.

Long-term stability of the solid electrolyte interphase (SEI) and cathode-electrolyte interface (CEI) layers formed on anodes and cathodes is imperative to mitigate the interfacial degradation of electrodes and enhance the cycle life of lithium-ion batteries (LIBs). However, the SEI on the anode and CEI on the cathode are vulnerable to the reactive species of PF5 and HF produced by the decomposition and hydrolysis of the conventional LiPF6 electrolyte in a battery inevitably containing a trace amount of water. Here, we report a new class of cyclic carbonate-based electrolyte additives to preserve the integrity of SEI and CEI in LIBs. This new class of additives is designed and synthesized by an ecofriendly approach that involves fixing CO2 with functional epoxides bearing various reactive side chains. It was found that the cyclic carbonates of 3-(1-ethoxyethoxy)-1,2-propylene carbonate and 3-trimethoxysilylpropyloxy-1,2-propylene carbonate, possessing high capability for the stabilization of Lewis-acidic PF5, exhibit a capacity retention of 79.0% after 1000 cycles, which is superior to that of the pristine electrolyte of 54.7%. Moreover, TMSPC has HF-scavenging capability, which, along with PF5 stabilization, results in enhanced rate capability of commercial LiNi0.6Mn0.2Co0.2O2 (NCM622)/graphite full cells, posing a significant potential for high-energy-density LIBs with long cycle stability.

Biomimetic Superoxide Disproportionation Catalyst for Anti-Aging Lithium-Oxygen Batteries.

Reactive oxygen species or superoxide (O2-), which damages or ages biological cells, is generated during metabolic pathways using oxygen as an electron acceptor in biological systems. Superoxide dismutase (SOD) protects cells from superoxide-triggered apoptosis by converting superoxide to oxygen and peroxide. Lithium-oxygen battery (LOB) cells have the same aging problems caused by superoxide-triggered side reactions. We transplanted the function of SOD of biological systems into LOB cells. Malonic acid-decorated fullerene (MA-C60) was used as a superoxide disproportionation chemocatalyst mimicking the function of SOD. As expected, MA-C60 as the superoxide scavenger improved capacity retention along charge/discharge cycles successfully. A LOB cell that failed to provide a meaningful capacity just after several cycles at high current (0.5 mA cm-2) with 0.5 mAh cm-2 cutoff survived up to 50 cycles after MA-C60 was introduced to the electrolyte. Moreover, the SOD-mimetic catalyst increased capacity, e.g., more than a 6-fold increase at 0.2 mA cm-2. The experimentally observed toroidal morphology of the final discharge product of oxygen reduction (Li2O2) and density functional theory calculation confirmed that the solution mechanism of Li2O2 formation, more beneficial than the surface mechanism from the capacity-gain standpoint, was preferred in the presence of MA-C60.

Fermentation of red ginseng extract by the probiotic Lactobacillus plantarum KCCM 11613P: ginsenoside conversion and antioxidant effects.

BACKGROUND: Ginsenosides, which are bioactive components in ginseng, can be converted to smaller compounds for improvement of their pharmacological activities. The conversion methods include heating; acid, alkali, and enzymatic treatment; and microbial conversion. The aim of this study was to determine the bioconversion of ginsenosides in fermented red ginseng extract (FRGE). METHODS: Red ginseng extract (RGE) was fermented using Lactobacillus plantarum KCCM 11613P. This study investigated the ginsenosides and their antioxidant capacity in FRGE using diverse methods. RESULTS: Properties of RGE were changed upon fermentation. Fermentation reduced the pH value, but increased the titratable acidity and viable cell counts of lactic acid bacteria. L. plantarum KCCM 11613P converted ginsenosides Rb2 and Rb3 to ginsenoside Rd in RGE. Fermentation also enhanced the antioxidant effects of RGE. FRGE reduced 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and reducing power; however, it improved the inhibition of ß-carotene and linoleic acid oxidation and the lipid peroxidation. This suggested that the fermentation of RGE is effective for producing ginsenoside Rd as precursor of ginsenoside compound K and inhibition of lipid oxidation. CONCLUSION: This study showed that RGE fermented by L. plantarum KCCM 11613P may contribute to the development of functional food materials.

Scavenging Materials to Stabilize LiPF6 -Containing Carbonate-Based Electrolytes for Li-Ion Batteries.

In conjunction with electrolyte additives used for tuning the interfacial structures of electrodes, functional materials that eliminate or deactivate reactive substances generated by the degradation of LiPF6 -containing electrolytes in lithium-ion batteries offer a wide range of electrolyte formulation opportunities. Herein, the recent advancements in the development of: (i) scavengers with high selectivity and affinity toward unwanted species and (ii) promoters of ion-paired LiPF6 dissociation are highlighted, showing that the utilization of the above additives can effectively mitigate the problem of electrolyte instability that commonly results in battery performance degradation and lifetime shortening. A deep mechanistic understanding of LiPF6 -containing electrolyte failure and the action of currently developed additives is demonstrated to enable the rational design of effective scavenging materials and thus allow the fabrication of highly reliable batteries.

Understanding voltage decay in lithium-excess layered cathode materials through oxygen-centred structural arrangement.

Lithium-excess 3d-transition-metal layered oxides (Li1+xNiyCozMn1-x-y-zO2, >250 mAh g-1) suffer from severe voltage decay upon cycling, which decreases energy density and hinders further research and development. Nevertheless, the lack of understanding on chemical and structural uniqueness of the material prevents the interpretation of internal degradation chemistry. Here, we discover a fundamental reason of the voltage decay phenomenon by comparing ordered and cation-disordered materials with a combination of X-ray absorption spectroscopy and transmission electron microscopy studies. The cation arrangement determines the transition metal-oxygen covalency and structural reversibility related to voltage decay. The identification of structural arrangement with de-lithiated oxygen-centred octahedron and interactions between octahedrons affecting the oxygen stability and transition metal mobility of layered oxide provides the insight into the degradation chemistry of cathode materials and a way to develop high-energy density electrodes.

Fluoroethylene Carbonate-Based Electrolyte with 1 M Sodium Bis(fluorosulfonyl)imide Enables High-Performance Sodium Metal Electrodes.

Sodium (Na) metal anodes with stable electrochemical cycling have attracted widespread attention because of their highest specific capacity and lowest potential among anode materials for Na batteries. The main challenges associated with Na metal anodes are dendritic formation and the low density of deposited Na during electrochemical plating. Here, we demonstrate a fluoroethylene carbonate (FEC)-based electrolyte with 1 M sodium bis(fluorosulfonyl)imide (NaFSI) salt for the stable and dense deposition of the Na metal during electrochemical cycling. The novel electrolyte combination developed here circumvents the dendritic Na deposition that is one of the primary concerns for battery safety and constructs the uniform ionic interlayer achieving highly reversible Na plating/stripping reactions. The FEC-NaFSI constructs the mechanically strong and ion-permeable interlayer containing NaF and ionic compounds such as Na2CO3 and sodium alkylcarbonates.

Molecular Engineered Safer Organic Battery through the Incorporation of Flame Retarding Organophosphonate Moiety.

Here, we report the first electrochemical assessment of organophosphonate-based compound as a safe electrode material for lithium-ion batteries, which highlights the reversible redox activity and inherent flame retarding property. Dinickel 1,4-benzenediphosphonate delivers a high reversible capacity of 585 mA h g-1 with stable cycle performance. It expands the scope of organic batteries, which have been mainly dominated by the organic carbonyl family to date. The redox chemistry is elucidated by X-ray absorption spectroscopy and solid-state 31P NMR investigations. Differential scanning calorimetry profiles of the lithiated electrode material exhibit suppressed heat release, delayed onset temperature, and endothermic behavior in the elevated temperature zone.

Foldable Electrode Architectures Based on Silver-Nanowire-Wound or Carbon-Nanotube-Webbed Micrometer-Scale Fibers of Polyethylene Terephthalate Mats for Flexible Lithium-Ion Batteries.

A crumply and highly flexible lithium-ion battery is realized by using microfiber mat electrodes in which the microfibers are wound or webbed with conductive nanowires. This electrode architecture guarantees extraordinary mechanical durability without any increase in resistance after folding 1000 times. Its areal energy density is easily controllable by the number of folded stacks of a piece of the electrode mat. Deformable lithium-ion batteries of lithium iron phosphate as cathode and lithium titanium oxide as anode at high areal capacity (3.2 mAh cm-2 ) are successfully operated without structural failure and performance loss, even after repeated crumpling and folding during charging and discharging.