Removal of urea in ultrapure water system by urease-coated reverse osmosis membrane.

Among the various substances found in the feed source for the production of ultrapure water (UPW), urea is challenging to remove because it is a small molecular weight molecule that is not easily oxidized and does not carry a charge under neutral pH conditions. Urease enzyme, found in various organisms such as plants and bacteria, catalyze the hydrolysis of urea into carbon dioxide and ammonia. In this study, urease was immobilized on the polyamide layer of a reverse osmosis (RO) membrane to remove urea in UPW systems. The removal efficiency of urea by urease-coated RO membrane showed up to 27.9 % higher urea removal efficiency compared to the pristine membrane. This increase in urea removal can be attributed to both physical and biological effects from the urease coating on the membrane. Firstly, urease on the membrane surface can act as an additional physical barrier for urea to pass through. Secondly, urea can be hydrolyzed by the enzyme when it passes through the urease-coated RO membrane. In a two-pass RO system typical for UPW production, the removal of urea by a urease-coated membrane would be enhanced by twofold. This overall method can significantly increase the removal efficiency of urea in UPW systems, especially when considering the compounded removal by the urease coating, rejection by RO, and additional reactions by other treatment processes. Moreover, urea in UPW systems can be removed without the installment of additional processes by simply coating urease on the existing RO membranes.

Adsorptive chito-beads for control of membrane fouling.

Chitosan has excellent antimicrobial, adsorption, heavy metal removal, and adhesion properties, making it a good substitute for microplastic-based cleaners. Here, chitosan microbeads (chito-beads) of various sizes ranging from 32 µm to 283 µm were prepared via emulsion using a liquid on oil method and the feasibility of using them as an essential constituent in a chemical cleaning solution for a reverse-osmosis (RO) membrane-fouling-control process was assessed. Prior to the assessment the cleaning efficiency of a solution containing chito-beads, the interaction energy between chitosan and a representative organic foulant (humic acid (HA)) in a RO membrane fouling was analyzed using colloidal atomic force microscopy, and the strongest attraction between chitosan and HA was observed in an aqueous solution. When comparing the membrane cleaning efficiency of cleaning solutions with and without chito-beads, smaller chito-beads (32 µm and 70 µm) were found to have higher cleaning efficiency. Applications of chito-beads to the membrane cleaning process can enhance the cleaning efficiency through the physicochemical interaction with organic foulants. This study can widen the use of chito-beads as an additive to membrane chemical cleaning solutions to control membrane fouling in other membrane processes as well.

A peptide of PilZ domain-containing protein controls wastewater-treatment-membrane biofouling by inducing bacterial attachment.

Membrane-based wastewater reclamation is used to mitigate water scarcity; however, irreversible biofouling is an elusive problem that hinders the efficiency of a forward-osmosis (FO) membrane-based process, and the protein responsible for fouling is unknown. Herein, we identified fouling proteins by analyzing the microbiome and proteome of wastewater extracellular polymeric substances responsible for strong irreversible FO-membrane fouling. The IGLSSLPR peptide of a PilZ domain-containing protein was found to recruit bacterial attachment when immobilized on the membrane surface while suppressing it when dissolved, in a similar manner to the Arg-Gly-Asp (RGD) peptide in mammalian cell cultures. Bacteria adhere to IGLSSLPR and poly-l-lysine-coated membranes with similar energies and exhibit water fluxes that decline similarly, which is ascribable to interaction as strong as electrostatic interactions in the peptide-coated membranes. We conclude that IGLSSLPR is the key domain responsible for membrane fouling and can be used to develop antifouling technology against bacteria, which is similar to the current usage of RGD peptide in mammalian cell cultures.

Ionic fluid as a novel cleaning agent for the control of irreversible fouling in reverse osmosis membrane processes.

While a variety of chemical cleaning strategies has been studied to control fouling in membrane-based water treatment processes, the removal of irreversible foulants strongly bound on membrane surfaces has not been successful. In this study, we firstly investigated the diluted aqueous solutions of ionic fluid (IF, 1-ethyl-3-methylimidazolium acetate) as a cleaning agent for three model organic foulants (humic acid, HA; bovine serum albumin, BSA; sodium alginate, SA). The real-time monitoring of cleaning progress by optical coherence tomography (OCT) showed that fouling layer was dramatically swelled by introducing IF solution and removed by shear force exerted during cleaning. This phenomenon was induced due to the pre-existing interactions between organic foulants were weakened by the intrusion of IF into the fouling layer, which was analyzed by the measurement of adhesion forces using atomic force microscopy (AFM). In the experiments with model foulants and wastewater effluent, IF was added to alkaline cleaning agents (NaOH) to verify the applicability to be supplemented in commercial cleaning agents, and resulted in the significantly enhanced control of irreversible membrane fouling. Implication of utilizing recyclable IF with negligible volatility is that environmental effects of membrane cleaning solutions could be minimized by decreasing usage of cleaning chemicals, while increasing the cleaning efficiency.

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells.

Improvements to perovskite solar cells (PSCs) have focused on increasing their power conversion efficiency (PCE) and operational stability and maintaining high performance upon scale-up to module sizes. We report that replacing the commonly used mesoporous-titanium dioxide electron transport layer (ETL) with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots (paa-QD-SnO2) on the compact-titanium dioxide enhanced light capture and largely suppressed nonradiative recombination at the ETL-perovskite interface. The use of paa-QD-SnO2 as electron-selective contact enabled PSCs (0.08 square centimeters) with a PCE of 25.7% (certified 25.4%) and high operational stability and facilitated the scale-up of the PSCs to larger areas. PCEs of 23.3, 21.7, and 20.6% were achieved for PSCs with active areas of 1, 20, and 64 square centimeters, respectively.

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells.

Metal halide perovskites of the general formula ABX3-where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion-have shown great potential as light harvesters for thin-film photovoltaics1-5. Among a large number of compositions investigated, the cubic α-phase of formamidinium lead triiodide (FAPbI3) has emerged as the most promising semiconductor for highly efficient and stable perovskite solar cells6-9, and maximizing the performance of this material in such devices is of vital importance for the perovskite research community. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO-) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. The resulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance.

Effects of combinational prophylactics composed of physostigmine and procyclidine on soman-induced lethality, seizures and brain injuries.

The antidotal, anticonvulsant and neuroprotective effects of physostigmine (PhS) and procyclidine (PC), the combinational prophylactics for organophosphate poisoning, were evaluated. For the investigation of dose-response relationship in rats and guinea pigs, various doses (0-6 mg/kg) of PC in combination with a fixed dose (0.1 mg/kg) of PhS were pretreated subcutaneously 30 min prior to subcutaneous poisoning with soman. Procyclidine in combination with PhS exhibited remarkable synergistic effects in a dose-dependent manner, leading to 1.92-5.07 folds of protection ratio in rats and 3.00-4.70 folds in guinea pigs. On the other hand, a low effect (1.65 fold) was achieved with the traditional antidotes atropine (17.4 mg/kg) plus 2-pralidoxime (30 mg/kg) treated immediately after soman poisoning, compared with a marked protection (5.50 fold) with atropine (17.4 mg/kg) plus HI-6 (125 mg/kg) in unpretreated rats. Noteworthy, the combinational prophylactics greatly potentiated the effect of atropine plus 2-pralidoxime to 6.13 or 12.27 folds and that of atropine plus HI-6 to 12.00 or 21.50 folds with 1.0 or 3.0 mg/kg of PC, respectively. A high dose (100 µg/kg, 1.3×LD(50)) of soman induced severe epileptiform seizures in rats pretreated with HI-6 (125 mg/kg), resulting in brain injuries in discrete brain regions under histopathological examination in 24 h. Interestingly, such seizures and excitotoxic brain injuries were fully prevented by pretreatment with PhS (0.1 mg/kg) and PC (1 mg/kg). Taken together, it is proposed that the prophylactics composed of PhS and PC could be a promising regimen for the prevention of lethality, seizures and brain injuries induced by soman poisoning.