Light sensing in a photoresponsive, organic-based complementary inverter.

A photoresponsive organic complementary inverter was fabricated and its light sensing characteristics was studied. An organic circuit was fabricated by integrating p-channel pentacene and n-channel copper hexadecafluorophthalocyanine (F16CuPc) organic thin-film transistors (OTFTs) with a polymeric gate dielectric. The F16CuPc OTFT showed typical n-type characteristics and a strong photoresponse under illumination. Whereas under illumination, the pentacene OTFT showed a relatively weak photoresponse with typical p-type characteristics. The characteristics of the organic electro-optical circuit could be controlled by the incident light intensity, a gate bias, or both. The logic threshold (V(M), when V(IN) = V(OUT)) was reduced from 28.6 V without illumination to 19.9 V at 6.94 mW/cm². By using solely optical or a combination of optical and electrical pulse signals, light sensing was demonstrated in this type of organic circuit, suggesting that the circuit can be potentially used in various optoelectronic applications, including optical sensors, photodetectors and electro-optical transceivers.

Control over multifunctionality in optoelectronic device based on organic phototransistor.

Highly stable, reproducible, photosensitive organic field-effect transistors based on an n-type organic material, copper hexadecafluorophthalocyanine, and two different polymeric gate dielectrics has been reported and their performances have been compared by evaluating the surface/interface properties. The devices produced a maximum photocurrent gain (I(light)/I(dark)) of 79 at V(G) = 7 V and showed the potentiality as multifunctional optoelectronic switching applications depending upon the external pulses. The switching time of the transistor upon irradiation of light pulse, i.e., the photoswitching time of the device, was measured to be approximately 10 ms. On the basis of optical or combination of optical and electrical pulses, the electronic/optoelectronic properties of the device can be tuned efficiently. The multifunctions achieved by the single device can ensure very promising material for high density RAM and other optoelectronic applications. Furthermore, as the device geometry in the present work is not limited to rigid substrate only, it will lead to the development of flexible organic optoelectronic switch compatible with plastic substrates.