Lignin Nanoparticles as A Promising Way for Enhancing Lignin Flame Retardant Effect in Polylactide.

The present study investigates the effect of using lignin at nanoscale as new flame-retardant additive for polylactide (PLA). Lignin nanoparticles (LNP) were prepared from Kraft lignin microparticles (LMP) through a dissolution-precipitation process. Both micro and nano lignins were functionalized using diethyl chlorophosphate (LMP-diEtP and LNP-diEtP, respectively) and diethyl (2-(triethoxysilyl)ethyl) phosphonate (LMP-SiP and LNP-SiP, respectively) to enhance their flame-retardant effect in PLA. From the use of inductively coupled plasma (ICP) spectrometry, it can be considered that a large amount of phosphorus has been grafted onto the nanoparticles. It has been previously shown that blending lignin with PLA induces degradation of the polymer matrix. However, phosphorylated lignin nanoparticles seem to limit PLA degradation during melt processing and the nanocomposites were shown to be relatively thermally stable. Cone calorimeter tests revealed that the incorporation of untreated lignin, whatever its particle size, induced an increase in pHRR. Using phosphorylated lignin nanoparticles, especially those treated with diethyl (2-(triethoxysilyl)ethyl) phosphonate allows this negative effect to be overcome. Moreover, the pHRR is significantly reduced, even when only 5 wt% LNP-SiP is used.

Rotational diffusion of partially wetted colloids at fluid interfaces.

HYPOTHESIS: Rotational Brownian diffusions of colloidal particles at a fluid interface play important roles in particle self-assembly and in surface microrheology. Recent experiments on translational Brownian motion of spherical particles at the air-water interface show a significant slowing down of the translational diffusion with respect to the hydrodynamic predictions (Boniello et al., 2015). For the rotational diffusions of partially wetted colloids, slowing down of the particle dynamics can be also expected. EXPERIMENTS: Here, the rotational dynamics of Janus colloids at the air-water interface have been experimentally investigated using optical microscopy. Bright field and fluorescent microscopies have been used to measure the in-plane and out-of-plane particle rotational diffusions exploiting the Janus geometry of the colloids we fabricated. FINDINGS: Our results show a severe slowing down of the rotational diffusion Dr,⊥ connected to the contact line motion and wetting-dewetting dynamics occurring on particle regions located at opposite liquid wedges. A slowing down of the particle rotational diffusion about an axis parallel to the interfacial normal Dr,|| was also observed. Contact line fluctuations due to partial wetting dynamics lead to a rotational line friction that we have modelled in order to describe our results.

Tailoring Patterns of Surface-Attached Multiresponsive Polymer Networks.

A new strategy for the fabrication of micropatterns of surface-attached hydrogels with well-controlled chemistry is reported. The "grafting onto" approach is preferred to the "grafting from" approach. It consists of cross-linking and grafting preformed and functionalized polymer chains through thiol-ene click chemistry. The advantage is a very good control without adding initiators. A powerful consequence of thiol-ene click reaction by UV irradiation is the facile fabrication of micropatterned hydrogel thin films by photolithography. It is achieved either with photomasks using common UV lamp or without photomasks by direct drawing due to laser technology. Our versatile approach allows the fabrication of various chemical polymer networks on various solid substrates. It is demonstrated here with silicon wafers, glass and gold surfaces as substrates, and two responsive hydrogels, poly(N-isopropylacrylamide) for its responsiveness to temperature and poly(acrylic acid) for its pH-sensitivity. We also demonstrate the fabrication of stable hydrogel multilayers (or stacked layers) in which each elementary layer height can widely range from a few nanometers to several micrometers, providing an additional degree of freedom to the internal architecture of hydrogel patterns. This facile route for the synthesis of micrometer-resolute hydrogel patterns with tailored architecture and multiresponsive properties should have a strong impact.

Multiscale Surface-Attached Hydrogel Thin Films with Tailored Architecture.

A facile route for the fabrication of surface-attached hydrogel thin films with well-controlled chemistry and tailored architecture on wide range of thickness from nanometers to micrometers is reported. The synthesis, which consists in cross-linking and grafting the preformed and ene-reactive polymer chains through thiol-ene click chemistry, has the main advantage of being well-controlled without the addition of initiators. As thiol-ene click reaction can be selectively activated by UV-irradiation (in addition to thermal heating), micropatterned hydrogel films are easily synthesized. The versatility of our approach is illustrated by the possibility to fabricate various chemical polymer networks, like stimuli-responsive hydrogels, on various solid substrates, such as silicon wafers, glass, and gold surfaces. Another attractive feature is the development of new complex hydrogel films with targeted architecture. The fabrication of various architectures for polymer films is demonstrated: multilayer hydrogel films in which single-networks are stacked one onto the other, interpenetrating networks films with mixture of two networks in the same layer, and nanocomposite hydrogel films where nanoparticles are stably trapped inside the mesh of the network. Thanks to its simplicity and its versatility this novel approach to surface-attached hydrogel films should have a strong impact in the area of polymer coatings.