The modified Hardinge approach is not inferior to trochanteric flip osteotomy for Pipkin type IV femoral head fractures: a comparative study in 40 patients.

PURPOSE: To compare the modified Hardinge approach and trochanteric flip osteotomy for the treatment of Pipkin type IV femoral head fractures. METHODS:  This retrospective study included 40 patients who underwent surgical treatment for Pipkin type IV femoral head fractures between 2011 and 2020 and completed at least 1 year of follow-up. The clinical outcome of the Merle d'Aubigné-Postel score and radiological outcomes, including the quality of the fracture reduction, osteonecrosis of the femoral head, posttraumatic osteoarthritis, and heterotopic ossification, were compared between the two groups. Conversion to total hip replacement was recorded as the main outcome measure, analyzed by Kaplan-Meier curve and log-rank test. RESULTS: Nineteen and 21 patients were treated using the modified Hardinge approach (Group A) and trochanteric flip osteotomy (Group B), respectively. The estimated surgical blood loss was significantly higher in Group B (500.00 ± 315.44 mL vs. 246.32 ± 141.35 mL; P = 0.002). Two patients in Group B complained of discomfort caused by the trochanteric screws and requested implant removal. Radiographic outcomes did not differ significantly between the two groups. Clinical outcomes assessed using the Merle d'Aubigné-Postel score 1 year after injury were nearly identical (P = 0.836). Four (21.1%) patients in Group A and three (14.3%) patients in Group B underwent conversion to total hip replacement during the follow-up period; the log-rank test showed no significant difference (P = 0.796). CONCLUSIONS: The modified Hardinge approach resulted in reduced blood loss, with clinical and radiological outcomes similar to those of trochanteric osteotomy; thus, it is an acceptable alternative to trochanteric flip osteotomy.

Novel Bioresorbable Drug-Eluting Mesh Scaffold for Therapy of Muscle Injury.

A novel bioresorbable drug-eluting polycaprolactone (PCL) mesh scaffold was developed, utilizing a solvent-cast additive manufacturing technique, to promote therapy of muscle injury. The degradation rate and mechanical properties strength of the PCL mesh were characterized after immersion in a buffer solution for different times. The in vitro release characteristics of vancomycin, ceftazidime, and lidocaine from the prepared mesh were evaluated using a high-performance liquid chromatography (HPLC) assay. In addition, the in vivo efficacy of PCL meshes for the repair of muscle injury was investigated on a rat model with histological examinations. It was found that the additively manufactured PCL meshes degraded by 13% after submission in buffered solution for four months. All PCL meshes with different pore sizes exhibited greater strength than rat muscle and survived through 10,000 cyclic loadings. Furthermore, the meshes could offer a sustained release of antibiotics and analgesics for more than 3 days in vitro. The results of this study suggest that drug-loaded PCL mesh exhibits superior ability to pure PCL mesh in terms of effectively promoting muscle repair in rat models. The histological assay also showed adequate biocompatibility of the resorbable meshes. The additively manufactured biodegradable drug-eluting meshes may be adopted in the future in humans for the therapy of muscle injuries.

Development of novel hybrid 3D-printed degradable artificial joints incorporating electrospun pharmaceutical- and growth factor-loaded nanofibers for small joint reconstruction.

Small joint reconstruction remains challenging and can lead to prosthesis-related complications, mainly due to the suboptimal performance of the silicone materials used and adverse host reactions. In this study, we developed hybrid artificial joints using three-dimensional printing (3D printing) for polycaprolactone (PCL) and incorporated electrospun nanofibers loaded with drugs and biomolecules for small joint reconstruction. We evaluated the mechanical properties of the degradable joints and the drug discharge patterns of the nanofibers. Empirical data revealed that the 3D-printed PCL joints exhibited good mechanical and fatigue properties. The drug-eluting nanofibers sustainedly released teicoplanin, ceftazidime, and ketorolac in vitro for over 30, 19, and 30 days, respectively. Furthermore, the nanofibers released high levels of bone morphogenetic protein-2 and connective tissue growth factors for over 30 days. An in vivo animal test demonstrated that nanofiber-loaded joints released high concentrations of antibiotics and analgesics in a rabbit model for 28 days. The animals in the drug-loaded degradable joint group showed greater activity counts than those in the surgery-only group. The experimental data suggest that degradable joints with sustained release of drugs and biomolecules may be utilized in small joint arthroplasty.

Does a simultaneous ventral/dorsal approach provide better reduction quality in treating acetabular fracture involving both columns with displaced posterior wall?

INTRODUCTION: Various surgical techniques have been proposed to manage acetabular fractures involving both columns with posterior wall displacement. However, the optimal surgical approach to achieve satisfactory reduction quality remains controversial. MATERIALS AND METHODS: This retrospective study evaluated 34 patients with fractures who were treated at a single medical institution. The patients were divided into two groups according to the ventral/dorsal surgical approach employed: simultaneous (SI) and sequential (SE). Perioperative parameters, as well as radiological and functional outcomes, were analyzed and compared between the two groups. RESULTS: The SI and SE groups comprised 9 and 23 out of the 34 patients, respectively. The SI group exhibited a significantly shorter surgical time and lower estimated blood loss than the SE group (p = 0.04 and 0.03, respectively). The quality of reductions of the anterior and posterior columns was similar between the two groups; however, superior reduction in the fracture gap of the posterior wall was observed in the SI group, as revealed by axial and coronal computed tomography scans. CONCLUSIONS: A simultaneous ventral and dorsal approach through the pararectus and the modified Gibson approach confer clinical advantages in reducing the fracture gap, surgical time, and intraoperative blood loss when managing acetabular fractures involving both columns and a displaced posterior wall. Therefore, these surgical approaches may be considered to be optimal for achieving satisfactory reduction quality in such fractures.

Novel CO2-encapsulated Pluronic F127 hydrogel for the treatment of Achilles tendon injury.

Nonsurgical treatment and surgical repairment of injured Achilles tendons seldom restore the wounded tendon to its original elasticity and stiffness. Therefore, we hypothesized that the surgically repaired Achilles tendon can achieve satisfactory regeneration by applying multi-drug encapsulated hydrogels. In this study, a novel bupivacaine-eluting carbon dioxide-encapsulated Pluronic F127 hydrogel (BC-hydrogel) was developed for the treatment of Achilles tendon injuries. The rheological properties of BC-hydrogel were measured. A high-performance liquid chromatography assay was used to assess the release characteristics of bupivacaine in both in vitro and in vivo settings. Furthermore, the effectiveness of BC-hydrogel in treating torn tendons was examined in a rat model, and histological analyses were conducted. Evidently, the degradable hydrogels continuously eluted bupivacaine for more than 14 days. The animal study results revealed that the BC-hydrogel improved the post-surgery mobility of the animals compared with pristine hydrogels. Histological assay results demonstrated a significant reaction to high vascular endothelial growth factor in the surrounding tissues and expression of collagen I within the repaired tendon. This demonstrates the potential of this novel BC-hydrogel as an effective treatment method for Achilles tendon injuries.

Perioperative peri-implant fracture after osteosynthesis for geriatric femoral pertrochanteric fracture with the linear compression integrated screw intramedullary nail system (INTERTAN™): a retrospective study.

BACKGROUND: Osteosynthesis for geriatric femoral pertrochanteric fractures using the linear compression integrated screw intramedullary nail system (INTERTAN™) has become popular. Nonetheless, cases of perioperative peri-implant fractures have been reported following this surgical technique. The factors responsible for this complication remain unclear. Therefore, we investigated perioperative peri-implant fracture risk factors and incidence, as well as overall outcomes, using the INTERTAN™ system for geriatric femoral pertrochanteric fractures. METHODS: We retrospectively reviewed 98 consecutive patients with geriatric femoral pertrochanteric fractures after INTERTAN™ fixation, with at least a 12-month follow-up period between May 2020 and April 2022 at a single medical institute. The patients' demographic characteristics, fracture pattern, quality of reduction, quality of fixation, nail length, morphology of the femur, and perioperative complications were recorded and analyzed. RESULTS: Among the 98 patients, 92 achieved union during follow-up. Twelve perioperative peri-implant fractures (12.2%) were recorded, all of which occurred during or within 1 month of osteosynthesis. Except for one patient who underwent re-osteosynthesis, the others underwent nonoperative treatment, and all achieved union. Multiple regression analysis revealed morphology of the femur with low-lesser trochanter width (odds ratio (OR) 0.532, 95% confidence interval (CI) 0.33-0.86, p = 0.01) to be the only factor contributing to perioperative peri-implant fractures. When the Youden index was used, the optimal cut-off value was 20.2 mm of low-lesser trochanter width. Low-lesser trochanter width < 20.2 mm was found to be a potential factor causing perioperative peri-implant fractures (OR 17.81, 95% CI 1.67-19.76, p = 0.017). CONCLUSIONS: Morphology of the femur with a low-lesser trochanter width smaller than 20.2 mm was found to be the only potential contributor to perioperative peri-implant fractures when using INTERTAN™ for geriatric femoral pertrochanteric fractures. Care should be taken during osteosynthesis, focusing not only on the fracture site but also on the femoral cortex around the implant. Although perioperative peri-implant fractures were observed within one month following osteosynthesis, the majority of these cases were effectively treated without surgical intervention.

Anti-Adhesive Resorbable Indomethacin/Bupivacaine-Eluting Nanofibers for Tendon Rupture Repair: In Vitro and In Vivo Studies.

The treatment and surgical repair of torn Achilles tendons seldom return the wounded tendon to its original elasticity and stiffness. This study explored the in vitro and in vivo simultaneous release of indomethacin and bupivacaine from electrospun polylactide-polyglycolide composite membranes for their capacity to repair torn Achilles tendons. These membranes were fabricated by mixing polylactide-polyglycolide/indomethacin, polylactide-polyglycolide/collagen, and polylactide-polyglycolide/bupivacaine with 1,1,1,3,3,3-hexafluoro-2-propanol into sandwich-structured composites. Subsequently, the in vitro pharmaceutic release rates over 30 days were determined, and the in vivo release behavior and effectiveness of the loaded drugs were assessed using an animal surgical model. High concentrations of indomethacin and bupivacaine were released for over four weeks. The released pharmaceutics resulted in complete recovery of rat tendons, and the nanofibrous composite membranes exhibited exceptional mechanical strength. Additionally, the anti-adhesion capacity of the developed membrane was confirmed. Using the electrospinning technique developed in this study, we plan on manufacturing degradable composite membranes for tendon healing, which can deliver sustained pharmaceutical release and provide a collagenous habitat.

Higher pelvic incidence values are a risk factor for trans-iliac trans-sacral screw malposition in sacroiliac complex fracture treatment.

BACKGROUND: Percutaneous iliosacral (IS) screw fixation and trans-iliac trans-sacral (TITS) screw fixation are clinically effective treatments of posterior pelvic sacroiliac fractures. In order to accurately assess the sacrum position relative to the pelvis, pelvic incidence (PI) is a commonly utilized radiographic parameter in sagittal view. This study aimed to investigate and compare the surgical outcomes and radiographic parameters of IS or TITS screw fixations for the treatment of posterior sacroiliac complex fractures with different PI values. MATERIALS AND METHODS: The data on patients with posterior pelvic sacroiliac fractures who underwent percutaneous IS or TITS screw fixations, or both, at a single level I trauma center between January 2017 and June 2020 were reviewed. We documented the patient characteristics and fracture types, reviewed surgical records, and measured the radiographic parameters via plain films and multi-planar computed tomography (mpCT) images. Radiographic variations in PI, sacral slope, pelvic tilt, sacral dysmorphism, pelvic ring reduction quality, screw deviation angles, screw malposition grading, and iatrogenic complications were documented and analyzed. RESULTS: A total of 85 patients were included, and 65 IS and 70 TITS screws were accounted for. Patients were divided into two groups according to screw fixation method and further divided into four sub-groups based on baseline PI values. The PI cutoff values were 49.85° and 48.05° in the IS and TITS screw groups, respectively, according to receiver operating characteristic analysis and Youden's J statistic. Smaller PI values were significantly correlated with sacral dysmorphism (p = 0.027 and 0.003 in the IS and TITS screw groups, respectively). Patients with larger PI values were at a significantly increased risk of screw malposition in the TITS screw group (p = 0.049), with no association in the IS screw group. Logistic regression confirmed that a larger PI value was a significant risk factor for screw malposition in the TITS screw group (p = 0.010). The post-operative outcomes improved from poor/fair (at 6 months) to good/average (at 12 months) based on the Postel Merle d'Aubigné and Majeed scores, with no significant differences between subgroups. CONCLUSIONS: Both percutaneous IS and TITS screw fixations are safe and effective treatments for posterior pelvic sacroiliac fractures. Due to the higher risk of screw malposition in patients with larger PI values, it is crucial to identify potential patients at risk when performing TITS screw fixation surgery. LEVEL OF EVIDENCE: Level III.

Incidence of deep vein thrombosis and symptomatic pulmonary embolism in Taiwanese patients with pelvic and/or acetabular fractures: a retrospective study.

Venous thromboembolism (VTE) is common in patients with trauma, and thromboprophylaxis has been advocated. However, conflicting results regarding VTE rates in the Asian population following orthopaedic procedures have been presented. We aimed to investigate the VTE incidence in Taiwanese patients with pelvic and/or acetabular fractures and identify the associated risk factors. We included 402 patients who underwent surgery for pelvic and/or acetabular fractures. All patients received mechanical thromboprophylaxis with graduated compression stockings. Duplex scanning was performed postoperatively or during follow-up when signs or symptoms of deep vein thrombosis (DVT) developed. Variables with a significance level of ≤ 0.1 in the univariate analyses were introduced into the multivariate logistic regression analysis to identify DVT risk factors. The overall DVT and symptomatic pulmonary embolism (PE) rate was 3.48% (14/402 patients). Among patients with DVT, 46.1% were asymptomatic. Patients with VTE were significantly older than those without. Multivariate logistic regression analysis revealed that age was a VTE risk factor. The incidence of DVT and symptomatic PE in our cohort was low. Advanced age was a risk factor for VTE. These findings could help clinicians develop appropriate prevention and treatment strategies for VTE in Taiwanese patients with pelvic and/or acetabular fractures.

The double-plate fixation technique prevents varus collapse in AO type C3 supra-intercondylar fracture of the distal femur.

INTRODUCTION: Varus collapse followed by osteosynthesis for distal femoral fractures with conventional implants has been well documented but is seldom mentioned in fractures managed with locking plates. The purpose of this study was to assess the incidence of varus collapse after treating complex supra-intercondylar fractures of the distal femur (AO type C3) using a Single Plate (SP) or Double Plate (DP) fixation technique. MATERIALS AND METHODS: We retrospectively reviewed 357 patients with distal femoral fractures who were treated at our hospital between 2006 and 2017. After excluding cases of infection, malignancy, periprosthetic fracture, revision surgery, pediatric fracture, and extra-articular fracture, 54 patients were included in the study. All demographic data and radiological and clinical outcomes were reviewed and analyzed. RESULTS: There were 54 patients enrolled into this study with age from 15 to 85 years old (mean 41.6, SD = 19.9), and 32 of them were open fractures (59%). The patients were further divided into either an SP (n = 15) or a DP group (n = 39). Demographics, including age, sex, injury severity score, and open fracture type, were all compatible between the two groups. The overall nonunion rate was 25.9% (n = 14; 6 from the SP and 8 from the DP group; p = 0.175). The varus collapse rate was 9.3% (n = 5; 4 from the SP and 1 from the DP group (p = 0.018). CONCLUSIONS: The varus collapse rate after osteosynthesis with a single lateral locking plate could be as high as 26.7% in AO type C3 fractures of the distal femur, which would be decreased to 2.6% by adding a medial buttress plate. Surgeons should consider DP fixation to avoid varus collapse in severely comminuted complete intra-articular fractures of the distal femur.

Morel-Lavallee lesions and number of surgeries for associated injuries predict surgical site infection risk following pelvic ring injury osteosynthesis.

We examined the incidence and causative factors of surgical site infection (SSI) following osteosynthesis for pelvic ring injury by reviewing the data of 97 consecutive patients with pelvic ring injuries treated between 2014 and 2019. Osteosyntheses, including internal or external skeletal fixation with plates or screws, were performed based on fracture type and patient's condition. Fractures were treated surgically, with a 36 months minimum follow-up period. Eight (8.2%) patients experienced SSI. The most common causative pathogen was Staphylococcus aureus. Patients with SSI had significantly worse functional outcomes at 3, 6, 12, 24, and 36 months than those without. For patients with SSI, the average Merle d'Aubigné and Majeed scores at 3, 6, 12, 24, and 36 months after injury were 2.4, 4.1, 8.0, 11.0, and 11.3, and 25.5, 32.1, 47.9, 61.9, and 63.3, respectively. Patients with SSI had a higher likelihood of undergoing staged operations (50.0 vs. 13.5%, p = 0.02), more surgeries for associated injuries (6.3% vs. 2.5%, p = 0.04), higher likelihood of Morel-Lavallee lesions (50.0% vs. 5.6%, p = 0.002), higher incidence of diversional colostomy (37.5% vs. 9.0%, p = 0.05), and longer intensive care unit stay (11.1 vs. 3.9 days, p = 0.001) than those without. The contributing factors for SSI were Morel-Lavallee lesions (odds ratio [OR] 4.55, 95% confidence interval [95% CI] 3.34-50.0) and other surgeries for associated injuries (OR 2.37, 95% CI 1.07-5.28). Patients with SSI after osteosynthesis for pelvic ring injuries may have worse short-term functional outcomes.

The deformities of acute diaphyseal clavicular fractures: a three-dimensional analysis.

BACKGROUND: Although minimally invasive surgeries have gained popularity in many orthopaedic fields, minimally invasive approaches for diaphyseal clavicular fracture have not been widely performed, which is attributed to difficulties in performing a closed reduction of fracture deformities of a curved bone in a three-dimensional space. The goal of this study was to investigate the radiographic parameters of fracture deformities in a three-dimensional space and to identify the risk factors for deformities. METHODS: The computed tomography images of 100 patients who sustained a clavicle fracture were included. Five parameters were used to analyze the deformities: change in clavicle length, fracture displacement, and fragment rotation around the X, Y, Z axes. The change in length was assessed using the length of the endpoint line. The displacement was assessed using the distance between the fracture midpoints. The rotation deformities were assessed using the Euler angles. The correlation between the parameters was evaluated with the Pearson correlation coefficient. The risk factors were evaluated using univariable analysis and multiple regression analysis. RESULTS: The average change in length was - 5.3 ± 8.3 mm. The displacement was 11.8 ± 7.1 mm. The Euler angles in the Z-Y-X sequences were -1 ± 8, 1 ± 8, and - 8 ± 13 degrees. The correlation coefficient between the change in length and the displacement was - 0.724 (p < 0.001). The variables found to increase the risk of shortening and displacement were right-sided fracture (p = 0.037), male sex (p = 0.015), and multifragmentary type (p = 0.020). The variables found to increase the risk of rotation deformity were the number of rib fractures (p = 0.001) and scapula fracture (p = 0.025). CONCLUSIONS: There was a strong correlation between shortening and displacement. The magnitude of anterorotation around the X axis was greater than the magnitude of retraction around the Z axis and depression around the Y axis. The risk factors for shortening and displacement included right-sided fracture, male sex, and multifragmentary type. The risk factor for retraction around the Z axis was the number of rib fractures, and the risk factor for depression around the Y axis was scapula fracture. These results could be useful adjuncts in guiding minimally invasive surgical planning for diaphyseal clavicular fractures.

Sustained Release of Antifungal and Antibacterial Agents from Novel Hybrid Degradable Nanofibers for the Treatment of Polymicrobial Osteomyelitis.

This study aimed to develop a drug delivery system with hybrid biodegradable antifungal and antibacterial agents incorporated into poly lactic-co-glycolic acid (PLGA) nanofibers, facilitating an extended release of fluconazole, vancomycin, and ceftazidime to treat polymicrobial osteomyelitis. The nanofibers were assessed using scanning electron microscopy, tensile testing, water contact angle analysis, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The in vitro release of the antimicrobial agents was assessed using an elution method and a high-performance liquid chromatography assay. The in vivo elution pattern of nanofibrous mats was assessed using a rat femoral model. The experimental results demonstrated that the antimicrobial agent-loaded nanofibers released high levels of fluconazole, vancomycin, and ceftazidime for 30 and 56 days in vitro and in vivo, respectively. Histological assays revealed no notable tissue inflammation. Therefore, hybrid biodegradable PLGA nanofibers with a sustainable release of antifungal and antibacterial agents may be employed for the treatment of polymicrobial osteomyelitis.

Three-year functional outcome after open pelvic fracture treatment: a retrospective case series from a level I trauma center.

PURPOSE: Open pelvic fractures have high mortality rates, and survivors may have ongoing functional deficits from severe trauma and invasive life-saving procedures. However, there are limited reports regarding the functional status evaluation following open pelvic fractures. We aimed to report the treatment experiences and short-term functional outcomes of patients with open pelvic fractures. METHODS: We retrospectively reviewed the data of 19 consecutive patients with pelvic fractures who underwent treatment at a single institute between January 2014 and June 2018. The resuscitation protocol, osteosynthesis strategy, reduction quality of the pelvic ring, and functional outcomes were analyzed. RESULTS: The incidence and mortality rates in patients with open pelvic fractures were 4.9 and 21.6%, respectively. Ten, one, and seven of the open wounds related to the pelvic fractures were located in Faringer zones I, II, and III, respectively. Fractures of four patients were categorized as classes 1 and 2, and those of 11 patients as class 3, according to the Jones-Powell classification. Eleven of 19 (57.9%) and 9 of 19 (47.5%) revealed excellent reduction quality by Matta/Torenetta and Lefaivre criteria, respectively. The Merle d'Aubigné score improved at each evaluation but stagnated after 24 months. The Majeed hip score also improved at the 12-month evaluation but the improvement stopped thereafter. At a 3-year follow-up, the patients with excellent reduction of the pelvic ring showed the highest functional performances. CONCLUSION: Improvements in functional status of patients with open pelvic fractures can be anticipated based on the reduction quality of the pelvis ring.

Pararectus approach to the AO B2.2 pelvic fracture: early functional and radiological outcomes.

PURPOSE: The pararectus approach is used to treat acetabular fractures; however, it remains unclear whether it can be used to treat pelvic fractures. This study aimed to examine the outcomes of patients with a pelvic ring fracture treated with this approach. METHODS: Seven patients with AO B2.2 pelvic fractures treated with the pararectus approach were included. Patients' pain was assessed pre- and postoperatively with a numerical rating scale. Radiological evaluations included inlet and outlet ratios and pelvic symmetry. Functional outcomes, including Merle d'Aubigné and Majeed scores, were also recorded for 12 months. RESULTS: One patient experienced obturator nerve neuropraxia. Pain scores ranged from 2.3-8.0 to 2.0-3.1 points before and after surgery, respectively. Radiological findings revealed satisfactory outcomes. The maximal gap of the affected ilium reduced from 8.6-20.2 to 0-3.4 mm, from 6.8-17.9 to 0-4.4 mm, and from 3.7-20.3 to 0-3.2 mm in the axial, sagittal, and coronal views, respectively. Based on multiple evaluations, functional outcomes were improved for all patients. CONCLUSION: The pararectus approach can be used safely and satisfactorily to treat AO B 2.2 pelvic fractures.

Causes of Increased Use of Closed Reduction and Internal Fixation for High-Energy-Related Traumatic Sacral Fractures.

BACKGROUND: Reasons for the increased use of closed reduction and internal fixation (CRIF) for traumatic sacral fractures (SFs) are unclear in the literature. Therefore, we aimed to report the annual changes in the number of patients, mechanisms of injury, fracture patterns, and fixation methods. METHODS: In this retrospective study, we extracted data of 271 patients (mean age, 37.5 years) from the trauma register over an 8-year period. Annual records regarding the number of patients, injury mechanisms, fracture types, and treatment options were statistically analyzed to examine the interactions among these factors. RESULTS: The number of patients with SFs increased significantly each year. The rate of admission to the intensive care unit after resuscitation was high (64.9%). Arbeitsgemeinschaft für Osteosynthesefragen (AO) type C pelvic ring injury (PRI), Dennis zone II injury, Roy-Camille type 2 injury, and U/H-type injury were the most common fracture types. Trans-iliac trans-sacral screws were mainly used in AO type B PRI, and their use significantly increased each year. For AO type C PRI, open reduction and internal fixation (ORIF) with rigid fixation was the main treatment, and the use of CRIF with iliosacral screws decreased each year. Stepwise statistical analysis revealed that the increase in AO type B PRI and ORIF for anterior PRI were the factors contributing to the increased use of CRIF for SFs. CONCLUSIONS: While the use of osteosynthesis for SFs is increasing, an increased use of CRIF for traumatic SFs has also been observed in clinical practice. This increase can be attributed to the increase in AO type B PRIs and ORIF for anterior PRIs.

Fracture edge features of diaphyseal clavicular fractures: a morphologic study.

BACKGROUND: Previous researchers used transverse fractures centered over the midpoint of the clavicle as the diaphyseal clavicular fracture models. However, as a result of shear stress concentration in sigmoid-shaped structures, most diaphyseal clavicular fractures have coronal fracture edges and are located distal to the midpoint. The purpose of this study was to quantify the morphology and utilize these parameters to establish clinically relevant fracture models. METHODS: The computed tomographic DICOM data of 100 consecutive patients were included. We investigated the morphologic characteristics of the fracture edges after virtual fracture reduction. The fracture orientation was determined based on the normal vectors of the best-fit plane of the fracture edges. The fracture location was measured by the extreme points of the edges. The fracture configuration was evaluated using fracture maps. RESULTS: There were 28 simple, 43 wedge, and 29 multifragmentary types. Coronal oriented fracture edges accounted for more than 70% of the simple, wedge, and multifragmentary types. The most proximal point of the proximal edge was located at 46.7% (42.0%-56.5%), 47.6% (42.5%-50.1%), and 46.3% (42.0%-49.3%) of the endpoint line in the simple, wedge, and multifragmentary types, respectively (P = .548). The most distal point of the distal edge was located at 72.2% (68.4%-75.0%), 73.2% (69.5%-76.9%), and 74.0% (69.6%-77.1%) of the endpoint line (P = .353). The longest proximal main fragments occurred in the simple types at 71.9% (66.3%-75.4%) of the endpoint line (P < .001), and the shortest distal main fragments occurred in the multifragmentary types at 55.8% (49.8%-59.3%) of the endpoint line (P = .001). The heatmaps showed a high concentration of anteriorly distributed wedge fragments (88%; n = 38/43) and coronally distributed multifragmentary fragments (62%; n = 18/29). CONCLUSIONS: We showed that typical diaphyseal clavicular fractures have coronal fracture edges and are located within the distal half of the diaphyseal segment. The fractured fragments were initiated anteriorly in the wedge types and then propagated coronally in the multifragmentary types. The features of these fracture edges could be useful in designing osteotomy models and provide different perspectives of anterior and superior plating techniques.

Simultaneous reduction and fixation of concomitant acetabular fracture and ipsilateral sacroiliac joint injury through the pararectus approach: a technical report and early radiological outcome.

PURPOSE: Osteosynthesis for acetabular fractures with ipsilateral sacroiliac joint (SIJ) injuries remains challenging for orthopedic surgeons, despite the evolution of surgical approaches, such as the pararectus approach, and treatment sequences. The study aimed to describe the details of the treatment of acetabular fracture with ipsilateral SIJ injury by the pararectus approach and to report its surgical outcomes. METHODS: We retrospectively assessed patients with acetabular fractures and ipsilateral SIJ injuries undergoing osteosynthesis by the pararectus approach over a three-year period. Evaluation parameters of the quality of reduction of both acetabulum and pelvis injuries were, among others, Matta's criteria, Lefaivre's criteria, inlet/outlet ratios, and maximal gap measured on computed tomography (CT) scans. RESULTS: Ten patients (seven men and three women) were enrolled. Pelvic ring injuries classified as AO B2.3 and acetabular fractures involving two columns were the most common fractures, accounting for 70% and 60%, respectively. Radiological evaluation for pelvic ring injury revealed three excellent and seven good results according to Matta's criteria, as well as five excellent, three good, and one fair results according to Lefaivre's criteria. Inlet and outlet ratios were between 0.84-1.06 and 0.93-1.60, respectively. The distance of the sacroiliac joints significantly improved postoperatively in both axial and coronal views (P = 0.002). Further, the maximal articular gap and step-off of acetabular fractures on axial, coronal, and sagittal view CT scans showed statistically significant improvements after osteosynthesis. CONCLUSION: Simultaneous reduction and fixation of acetabular fractures with ipsilateral SIJ injuries using the pararectus approach achieved satisfactory radiological outcomes. LEVEL OF EVIDENCE: IV. TRIAL REGISTRATION: Retrospectively registered.

A retrospective study of hip posterior fracture-dislocation: closed reduction at the emergency department or in the operation theater?

BACKGROUND: For hip posterior fracture-dislocation, the current consensus is to perform joint reduction within 6 h to prevent sequelae. However, whether a closed reduction (CR) should be performed at the emergency department (ED) or in the operation theater (OT) remains debatable. We aimed to assess the incidence and factors predictive of CR failure at the ED in patients with hip posterior fracture-dislocation. METHODS: Patients with hip posterior fracture-dislocation between 2009 and 2019 were included. Age, sex, body mass index (BMI), injury severity score, new injury severity score, time from injury to first reduction attempt (TIR), presence of associated femoral head fracture, posterior wall marginal impaction, and posterior wall fragment size were compared between patients with CR success and patients with CR failure at the ED. RESULTS: Fifty-five patients with hip posterior fracture-dislocation experienced CR attempts at the ED and were enrolled in the study. Thirty-eight (69.1%) hips were reduced successfully at the ED, and 17 (30.9%) experienced failure. No significant differences in age, sex, BMI, presence of femoral head fracture, marginal impaction, or size of the posterior wall fragment were found between the groups. TIR was significantly shorter in the successful CR group (2.24 vs. 4.11 h, p = 0.01). According to receiver operating characteristic curve analysis, 3.5 h was the cut-off time. CONCLUSIONS: For patients with hip posterior fracture-dislocation, TIR was a critical factor for successful CR. If the time interval exceeds 3.5 h from injury, the success rate of bedside CR at the ER is likely to decrease, and the OT should be prepared in case of failed bedside CR.

Combined Effects of Cognitive Impairment and Nutritional Trajectories on Functional Recovery for Older Patients after Hip-Fracture Surgery.

OBJECTIVES: Malnutrition and cognitive impairment are associated with poor functional recovery in older adults following hip-fracture surgery. This study examined the combined effects of cognitive impairment and nutritional trajectories on postoperative functional recovery for older adults following hip-fracture surgery. DESIGN: Prospective longitudinal correlational study. SETTING AND PARTICIPANTS: This study recruited 350 older adults (≥60 years of age) who received hip-fracture surgery at a 3000-bed medical center in northern Taiwan from September 2012 to March 2020. METHODS: Participant data were collected over a 2-year period after surgery for nutritional and cognitive status and activities of daily living (ADLs). Participants were grouped by type of nutritional trajectory using group-based trajectory modeling. Generalized estimating equations analyzed associations between trajectory groups/cognitive status at discharge and performance of ADLs. RESULTS: Nutritional trajectories best fit a 3-group trajectory model: malnourished (19%), at-risk of malnutrition (40%), and well-nourished (41%). Nutritional status for the malnourished group declined from 12 months to 24 months following surgery; nutritional status remained stable for at-risk of malnutrition and well-nourished groups. Interactions for cognitive impairment-by-nutritional status were significant: the malnourished + intact cognition subgroup had significantly better ADLs than the malnourished + cognitive impairment subgroup (b = 27.1, 95% confidence interval = 14.0-40.2; P < .001). For at-risk of malnutrition and well-nourished groups, there were no significant differences between cognitive impairment and intact cognition in ADLs. These findings suggest that nutritional status may buffer the negative effect of cognitive impairment on ADLs. CONCLUSIONS AND IMPLICATIONS: Better nutritional status over time for older adults following hip fracture can protect against adverse influences of cognitive impairment on ADLs during postoperative recovery. Participants with malnutrition and cognitive impairment had the poorest ADLs. These findings suggest interventions tailored to improving nutritional status may improve recovery for older adults following hip-fracture surgery.