Adsorption of anti-inflammatory and analgesic drugs traces in water on clay minerals.

The aim of this study was to assess the adsorption of four non-steroidal anti-inflammatory drugs (NSAIDs), namely Paracetamol (PRC), Diclofenac (DIC), Ibuprofen (IBU), and Ketoprofen (KET), using both batch and continuous experiments with clay. Various analytical techniques, including XRD, FTIR, SEM coupled to EDX, and Zeta potential, were employed to characterize both raw and calcined clay. XRD and FTIR analyses confirmed the kaolinite nature of the clay. SEM data revealed a lamellar structure formed in the clay after calcination at 550 °C. Adsorption tests were conducted to determine the optimal adsorption conditions. Batch kinetics of adsorption demonstrated rapid adsorption of all four NSAIDs, with the highest adsorption occurring at pH 4 (DIC, IBU, and KET) and pH 6 for PRC, using a concentration of 20 mg L-1 of calcined clay. Additionally, the pseudo-second-order model provided the best fit for all NSAIDs adsorption processes. Maximum adsorption capacities, as determined by the Langmuir model, were 80 mg g-1 for PRC, 238 mg -1g for DIC, 138 mg g-1 for IBU, and 245 mg g-1 for KET. In fixed bed column studies, three dynamic models (Thomas, Adams-Bohart, and Yoon-Nelson) were utilized to describe the breakthrough curves, with linear regression used to identify key characteristics for process design. The fixed bed column adsorption study revealed that DIC exhibited the highest removal efficiency at 98%, while KET, IBU, and PRC were more persistent, with removal efficiencies of 77.1%, 76.7%, and 67.1%, respectively. The Thomas model was deemed appropriate for describing the breakthrough curve. These findings offer valuable insights into the interactions between clay and pharmaceuticals with varying physicochemical properties. They also provide information on the adsorption models, saturation, and adsorption capacities of various pharmaceuticals on natural clays, which can be crucial for further research and environmental remediation efforts.

Soil contamination by microplastics in relation to local agricultural development as revealed by FTIR, ICP-MS and pyrolysis-GC/MS.

Plastic film mulching and use of wastewaters for irrigation have been common agricultural practices for over half a century in Tunisia, especially in arid regions, resulting in the undesired creation of a pathway for microplastics (MPs) to enter farmland soil. In order to assess the extent and characteristics of soil contamination by MPs in the Moknine province, an area of intensive agricultural practices, 16 farmland soil samples were collected and characterized. The total concentration of targeted MPs was 50-880 items/kg; among them, the most common MPs type being polypropylene (PP), mainly occurring as white/transparent fibers with small size (cross section <0.3 mm). SEM images of MPs surfaces revealed multiple features related to environmental exposure and degradation. ATR-FTIR spectroscopy and pyrolysis-GC/MS analyses enabled the accurate identification of MPs separated from the embedding soil micro- and macro-aggregates. Finally, contamination of the polymeric microparticles with a broad range of metals was found by ICP-MS analysis, suggesting that MPs can be vectors for transporting heavy metals in the soil and indicators of soil contamination as a result of mismanagement of industrial wastewaters.

Microplastics on Barra beach sediments in Aveiro, Portugal.

Microplastic (MPs) pollution has been recognized as a serious threat to marine environment with the growing use of plastics. There is no sufficient data on the extent and characteristics of MPs pollution in the beach sediments and sand in the Atlantic Ocean. The coastal area is one of the main tourist zones in Aveiro in Portugal, thus, impacted by both tourism and maritime traffic, which are major sources of MPs. Considering this issue, 33 sediment samples were collected from the Praia da Barra beach in Aveiro. This pilot study showed that large quantities of MPs are accumulated on this beach with a median concentration of 100 MP kg-1 (15-320 MP kg-1), that is dominated by polyethylene (30%), polypropylene (27%), polystyrene (18%), nylon (12%), and polyester (6%). Size <1 mm constituted 99.5% of particles, mostly of transparent or black colors, with highest concentrations closest to the water line.

Types, occurrence, and distribution of microplastics and metals contamination in sediments from south west of Kerkennah archipelago, Tunisia.

Microplastics (MPs) are one of the most significant solid waste pollutants in the marine environment and accumulate in sediments around worldwide. In this study, the pollution level, the type, occurrence, and distribution of MPs in sediments from the southwestern Kerkennah archipelago, Tunisia, were investigated. Sediment samples were collected from 20 adjacent sites through three "lines L1, L2, and L3." MPs were separated from sediment by density flotation (NaCl, 1.2 g cm-3) and characterized in terms of shape, size, and color using microscope. The accumulation of toxic chemicals such as trace metals on microplastics was measured by atomic absorption microwave-assisted acid extraction. Polymer types were identified using FTIR-ATR spectroscopy. This study showed that microplastics were found in all samples, which emphasized that their extensive distribution throughout three lines by an average abundance of "MPs" was 611 items/m2. Among the shape categories of plastic particles, fiber and fragment were the most dominant frequent shapes (94%). The more frequent colors found were white (52.7%) and transparent (35.1%). Regarding the sizes, the microplastics below 1 mm were the most common accounting for 97% of all plastics. Results of trace metals Zn, Cu, Pb, Cr, and Ni in sediments with concentrations were reported as 3.48 µg/g, 0.41 µg/g, 0.38 µg/g, 0.33 µg/g, and 0.12 µg/g, respectively. Graphical abstract.

Microplastic pollution in the sediments of Sidi Mansour Harbor in Southeast Tunisia.

Despite the increasing interest in microplastic (MP) research, the accurate prevalence, distribution and fate of these materials in the environment is yet poorly known and, consequently, a focus of debate. Hence, to better ascertain the presence of microplastics in specific environments, samples from 35 random sites distributed across a 4200-meter long section from the area of Sidi Mansour, Sfax-Tunisia, were collected and analyzed. MPs were extracted, digested with potassium hydroxide and dyed with Eosin B, for visual microscopy counting and sorting. Polymer composition and surface morphology were identified by FTIR-ATR spectroscopy and SEM microscopy. Total abundances ranged from 252 to-5332 particles per m2 where fragments and granules were the most frequent types of microplastics. These findings highlight the considerable presence of these materials in the studied harbor region and underscore the density dependence on the distribution and occurrence of MPs and how these tend to accumulate in the sandy sediments.

Development of Novel Peptide-Based Michael Acceptors Targeting Rhodesain and Falcipain-2 for the Treatment of Neglected Tropical Diseases (NTDs).

This paper describes the development of a class of peptide-based inhibitors as novel antitrypanosomal and antimalarial agents. The inhibitors are based on a characteristic peptide sequence for the inhibition of the cysteine proteases rhodesain of Trypanosoma brucei rhodesiense and falcipain-2 of Plasmodium falciparum. We exploited the reactivity of novel unsaturated electrophilic functions such as vinyl-sulfones, -ketones, -esters, and -nitriles. The Michael acceptors inhibited both rhodesain and falcipain-2, at nanomolar and micromolar levels, respectively. In particular, the vinyl ketone 3b has emerged as a potent rhodesain inhibitor (k2nd = 67 × 106 M-1 min-1), endowed with a picomolar binding affinity (Ki = 38 pM), coupled with a single-digit micromolar activity against Trypanosoma brucei brucei (EC50 = 2.97 µM), thus being considered as a novel lead compound for the discovery of novel effective antitrypanosomal agents.