Synthesis and Spectroscopic Investigations of Sm3+ Activated ZrO2 and Na2ZrO3 as Warm Light Phosphors.

In this work, we investigate how the structural and optical characteristics of ZrO2 and Na2ZrO3 are influenced by Sm3+ ion doping. Urea-assisted combustion approach is employed by varying the molar concentration of Sm3+ ions in both the host lattices. XRD pattern revealed the monoclinic crystal system for both samples. XPS investigation has been examined to acquire the chemical information of the samples. FESEM is used to identify the morphology of the samples. The optimum molar concentrations of Sm3+ doped ZrO2 and Na2ZrO3 phosphors, as per photoluminescence (PL) findings, are 1.5 mol% and 2 mol%, respectively. CIE coordinates of ZrO2:Sm3+ and Na2ZrO3:Sm3+ are found to be (x = 0.59, y = 0.41) and (x = 0.61, y = 0.39) that corresponds to the amber region of color gamut. The optical bandgap for the synthesized samples is estimated using the UV-Vis diffuse reflectance spectra and the obtained values for the optimal concentration of dopant (Sm3+) in the ZrO2 and Na2ZrO3 samples are 4.61 and 4.94 eV, respectively. The findings of the study reveal that the synthesized phosphors may be utilized as warm light phosphors and be a promising candidate for amber light-emitting diodes (LEDs).

Temperature dependent structural properties of Mn1.90M0.10O3(M = Cr and Fe).

The polycrystalline samples of Mn1.90Cr0.10O3(MCO) and Mn1.90Fe0.10O3(MFO) have been investigated for their temperature dependent magnetic and structural properties. The Cr and Fe substitutions have significant effect on the magnetic and structural properties of Mn2O3. Like pristine Mn2O3, the Cr and Fe substituted samples MCO and MFO also exhibit two antiferromagnetic transitions; one at ∼77 K, ∼80 K, respectively and another at ∼40 K. Our room temperature synchrotron x-ray powder diffraction (SXRD) results confirm that both the MCO and MFO samples crystallize in cubic symmetry. The temperature dependent SXRD results demonstrate the cubic to orthorhombic structural transition for the studied samples. The pristine Mn2O3shows cubic to orthorhombic transition around 310 K, whereas this structural transition shifted towards lower temperature side with these substitutions i.e. around 240 K for MCO and 260 K for MFO. Interestingly, the centrosymmetricPcabto non-centrosymmetricPca21change in symmetry is also resolved at the ferroelectric ordering temperature for MCO.

Comparative cryopreservation of indian wild orange (Citrus indica Tanaka) embryonic axes.

BACKGROUND: Indian Wild Orange (Citrus indica Tanaka) is an endangered and endemic species from northeast India for which effective ex situ conservation strategies, including embryo cryopreservation, are urgently needed. MATERIALS AND METHODS: Desiccation tolerance and cryopreservation ability for embryonic axes of Citrus indica was determined using three techniques (air desiccation-freezing, PVS2 vitrification-freezing and encapsulation-dehydration-freezing). Success was assessed as survival and recovery in vitro. RESULTS: Successful cryopreservation of embryonic axes was achieved using all three methods, with the highest survival achieved when using air desiccation-freezing (90%) followed by encapsulation-dehydration (85%) and PVS2 vitrification cryopreservation (80%). Regeneration levels were lower than survival levels for all three proceedures. Post-cryo regeneration success was: encapsulation-dehydration (64%) > air desiccation-freezing (55%) > PVS2 vitrification (52%). CONCLUSION: Although there was relatively high post-cryopreservation recovery growth obtained using all the three techniques, the air desiccation-freezing technique is preferred, as it is a simple, practical and reproducible technique for the long-term cryobanking of this important wild species. Doi: 10.54680/fr23310110512.

Management of plant nutrient dynamics under alkaline soils through graded application of pressmud and gypsum.

An incubation experiment was conducted to monitor the effect of different organic matter inputs with the graded application of gypsum at different time intervals on soil pH, sodium (Na) content and available plant nutrients like nitrogen (N) and sulphur (S) in alkaline soil. The experiment was formulated with nine treatments, i.e. control (T1), recommended dose of fertilizer (RDF) (T2), RDF+Gyp1 (T3), RDF+FYM5+Gyp2 (T4), RDF+FYM10+Gyp1 (T5), RDF+PM5+Gyp2 (T6), RDF+PM10+Gyp1 (T7), RDF+FYM2.5+PM2.5+Gyp2 (T8), RDF+FYM5+PM5+Gyp1 (T9) with three replications. Periodical soil samples were taken at six and twelve months intervals. Results showed that the addition of organic matter reduced the pH and Na content in the soil. More reduction was observed at one year period as compared to six months. The addition of farmyard manure (FYM) and pressmud (PM) at 10 t/ha with gypsum (1 t/ha) improved available N and available S content as compared to organic inputs (5 t/ha) with gypsum (2 t/ha) in soil. Pressmud application with FYM showed better availability of plant nutrients and a reduction of soil pH (8.39 to 7.79) and Na content from 626 to 391 mEq/L in the soil during the incubation period. During the study, the application of treatment T9 (FYM and PM in equal ratio with 1 t/ha gypsum) showed a better availability of available N (175 to 235 kg/ha) and S (15.44 to 23.24 kg/ha) and reduced the active ion concentration of Na. This study is very useful for the management of sodium toxicity, improving soil health and the mineralization rate of organic matter through the application of organic inputs for sustainable crop production.

Integrated experimental and theoretical studies on structural and magnetic properties of thin films of double perovskite ruthenates: Ba2DyRuO6 & Sr2DyRuO6.

Thin films of double perovskite ruthenates, viz., Ba2DyRuO6 (BDRO) and Sr2DyRuO6 (SDRO), have been successfully grown on a SrTiO3 substrate using the pulsed laser deposition technique. The BDRO samples crystallizes in cubic structure, while SDRO exhibits monoclinic structure as revealed in their X-Ray diffraction examination. Temperature-dependent magnetization measurements suggest the presence of ferromagnetism in BDRO, while paramagnetism is present for the SDRO thin film. Surprisingly, both films show canted antiferromagnetism at ∼T = 5 K as revealed in their isothermal magnetization curves. The inverse susceptibility has been fitted to the Curie-Weiss law for the SDRO sample, where the Curie temperature (TC ∼ -336.6 K) has been obtained, thus suggesting the prevalence of antiferromagnetic interactions. The existence of the canted magnetism at a lower temperature may be attributed to the Dzyaloshinskii-Moriya (D-M) interactions in the monoclinic SDRO sample due to structural distortion. However, the emergence of canted antiferromagnetism at lower temperatures (5 K) in the BDRO sample with cubic symmetry having no D-M interactions may be attributed to the various modifications at the surface of the thin films. Overall, a comparison made between the magnetic properties of both the thin films i.e., BDRO & SDRO, reveals the suppression of bulk magnetic ordering when compared to their bulk counterparts. The possible reason for the absence of any magnetic ordering in these thin films may be due to any modifications in superexchange interactions, any exchange bias, stress-strain, or uncompensated spins present in these types of thin films. UV-visible measurements for both the samples reveal a direct influence of the A-site element (Sr/Ba) on their band gaps, i.e., 3.66 eV and 2.59 eV for BDRO and SDRO samples, respectively, hence suggesting their insulating nature. We have also carried out first principles calculations with DFT using the CASTEP software to gain more insights into the experimental data. These thin films with insulating-antiferromagnetic properties may be crucial for "spintronics devices".

Tumor necrosis factor alpha and palmitate simulate bovine fatty liver disease in vitro when using abattoir-derived primary bovine hepatocytes isolated by a novel nonperfusion method.

Hepatic lipidosis (i.e., fatty liver) is a common periparturient disease in high-producing dairy cattle affecting nearly 50% of cows to some degree and costing an estimated 60 million dollars annually. Large animal studies are costly, labor intensive, and are not well suited to mechanistic studies. Traditionally, mechanistic studies employ in vitro methodologies, utilizing established cell lines or primary cell culture methods. However, with dairy cattle, established hepatic cell lines do not exist, and methods for primary cell culture studies typically involve complicated procedures that often utilize very young animals (typically bull calves). Several previously published papers have used abattoir-derived tissues as a source of primary cells; however, a simple method utilizing simple culture media has yet to be presented. In addition, we sought to develop a way to replicate the syndrome of fatty liver disease "in a dish" using adult cattle that should more closely represent the physiology of the periparturient dairy cow. Herein we present a non-perfusion-based method that results in robust growth and proliferation of abattoir-derived bovine hepatocytes that demonstrate lipid loading, elevated lactate dehydrogenase leakage, and cytotoxicity as demonstrated by elevated caspase 3/7 expression consistent with in vivo physiology of the periparturient dairy cow with fatty liver disease.

Reply to the 'Comment on "Structural, electrical and multiferroic characteristics of lead-free multiferroic: Bi(Co0.5Ti0.5)O3-BiFeO3 solid solution"' by P. E. Tomaszewski, RSC Adv., 2022, 12, DOI: 10.1039/D1RA08415A.

The cobalt and titanium modified BiFeO3 [i.e., Bi(Co0.40Ti0.40Fe0.20)O3; referred to as BCTF80/20] solid solution was synthesized via a simple and cost effective solid-state technique, and numerous sets of studies (structural, elemental, electrical, leakage current, multiferroic and other properties) were carried out and reported. The basic structural symmetry was investigated and phase identification of the prepared samples was carried out by analyzing powder X-ray diffraction data through the widely used "POWDMULT" software. From the XRD pattern [Fig. 2(a) of RSC Adv., 2018, 8, 36939], it is clear that almost all the reflection peaks (including those that appear to be split) have been indexed to a single phase (based on the best agreement between experimental and calculated interplanar distances and minimum standard deviation) system using the above software. The lattice parameters, average crystallite size, cell volume, and micro-strain value are strongly affected by the addition of Co and Ti into the bismuth ferrite. The significant enhancement of various parameter (i.e., electrical, multiferroic and so on) values of BCTF80/20 ceramics may make them promising candidates for the development of new generation electronic devices.

Strain assisted magnetoelectric coupling in ordered nanomagnets of CoFe2O4/SrRuO3/(Pb(Mg1/3Nb2/3)O3-PbTiO3) heterostructures.

We have explored the electric field controlled magnetization in the nanodot CoFe2O4/SrRuO3/PMN-PT (CFO/SRO/PMN-PT) heterostructures. Ordered ferromagnetic CFO nanodots (∼300 nm lateral dimension) are developed on the PMN-PT substrate (ferroelectric as well as piezoelectric) using a nanostencil-mask pattering method during pulsed laser deposition. The nanostructures reveal electric field induced magnetization reversal in the single domain CFO nanodots through transfer of piezostrains from the piezoelectric PMN-PT substrate to the CFO. Further, electric field modulated spin structure of CFO nanomagnets is analyzed by using x-ray magnetic circular dichroism (XMCD). The XMCD analysis reveals cations (Fe3+/Co2+) redistribution on the octahedral and tetrahedral site in the electric field poled CFO nanodots, establishing the strain induced magneto-electric coupling effects. The CFO/SRO/PMN-PT nanodots structure demonstrate multilevel switching of ME coupling coefficient (α) by applying selective positive and negative electric fields in a non-volatile manner. The retention of two stable states ofαis illustrated for ∼106seconds, which can be employed to store the digital data in non-volatile memory devices. Thus the voltage controlled magnetization in the nanodot structures leads a path towards the invention of energy efficient high-density memory devices.

Robust electronic and tunable magnetic states in Sm2 NiMnO6ferromagnetic insulator.

Ferromagnetic insulators (FM-Is) are the materials of interest for the new generation quantum electronic applications. Here, we have investigated the physical observables depicting FM-I ground states in epitaxial Sm2NiMnO6(SNMO) double perovskite thin films fabricated under different conditions to realize the different level of Ni/Mn anti-site disorders (ASDs). The presence of ASDs immensely influence the characteristic magnetic and anisotropy behaviors in SNMO system by introducing short scale antiferromagnetic interactions in predominant long range FM ordered host matrix. Charge disproportion between cation sites, in the form of Ni2++ Mn4+→ Ni3++ Mn3+, causes mixed valency in both Ni and Mn species, which is found insensitive to ASD concentrations. Temperature dependent photo emission, photo absorption measurements duly combined with cluster model configuration interaction simulations, suggest that the eigenstates of Ni and Mn cations can be satisfactorily described as a linear combination of the unscreeneddnand screeneddn+1L̲(L̲: O 2phole) states. The electronic structure across the Fermi level (EF) exhibits closely spaced Ni 3d, Mn 3dand O 2pstates. From occupied and unoccupied bands, estimated values of the Coulomb repulsion energy (U) and ligand to metal charge transfer energy (Δ), indicate charge transfer insulating nature, where remarkable modification in Ni/Mn 3d-O 2phybridization takes place across the FM transition temperature. Existence of ASD broadens the Ni, Mn 3dspectral features, whereas the spectral positions are found to be unaltered. Hereby, present work demonstrates SNMO thin film as a FM-I system, where the FM state can be tuned by manipulating ASD in the crystal structure, while the I state remains intact.

Conservation agriculture based integrated crop management sustains productivity and economic profitability along with soil properties of the maize-wheat rotation.

Field experiments were conducted to evaluate eight different integrated crop management (ICM) modules for 5 years in a maize-wheat rotation (MWR); wherein, ICM1&2-'business-as-usual' (conventional flatbed maize and wheat, ICM3&4-conventional raised bed (CTRB) maize and wheat without residues, ICM5&6-conservation agriculture (CA)-based zero-till (ZT) flatbed maize and wheat with the residues, and ICM7&8- CA-based ZT raised bed maize and wheat with the residues. Results indicated that the ICM7&8 produced significantly (p < 0.05) the highest maize grain yield (5 years av.) which was 7.8-21.3% greater than the ICM1-6. However, across years, the ICM5-8 gave a statistically similar wheat grain yield and was 8.4-11.5% greater than the ICM1-4. Similarly, the CA-based residue retained ICM5-8 modules had given 9.5-14.3% (5 years av.) greater system yields in terms of maize grain equivalents (MGEY) over the residue removed CT-based ICM1&4. System water productivity (SWP) was the highest with ICM5-8, being 10.3-17.8% higher than the ICM1-4. Nevertheless, the highest water use (TWU) was recorded in the CT flatbed (ICM1&2), ~ 7% more than the raised bed and ZT planted crops with or without the residues (ICM4-8). Furthermore, the ICM1-4 had produced 9.54% greater variable production costs compared to the ICM5-8, whereas, the ICM5-8 gave 24.3-27.4% additional returns than the ICM1-4. Also, different ICM modules caused significant (p < 0.05) impacts on the soil properties, such as organic carbon (SOC), microbial biomass carbon (SMBC), dehydrogenase (SDH), alkaline phosphatase (SAP), and urease (URE) activities. In 0.0-0.15 m soil profile, residue retained CA-based (ICM5-8) modules registered a 7.1-14.3% greater SOC and 10.2-17.3% SMBC than the ICM1-4. The sustainable yield index (SYI) of MWR was 13.4-18.6% greater under the ICM7&8 compared to the ICM1-4. Hence, this study concludes that the adoption of the CA-based residue retained ICMs in the MWR could sustain the crop yields, enhance farm profits, save water and improve soil properties of the north-western plans of India.

Efficacy and safety of phenol-based partial matricectomy in treatment of onychocryptosis: A systematic review and meta-analysis.

Chemical matricectomy is an established treatment modality of onychocryptosis. In this meta-analysis, we studied the efficacy and safety profile of phenol-based matricectomy. We performed an electronic database search of PubMed, EMBASE and grey literature using the search terms '(onychocryptosis OR ingrown toe nail) AND (phenol OR chemical matricectomy)' from inception till 31-12-2020, for controlled clinical trials with phenol in one of the treatment arms and at least 10 participants in each arm. From the initial search of 335, eighteen articles were included in the final analysis. There were a total of 1655 patients, of which 856 received phenol as an intervention modality. We found that nail matrix phenolisation was associated with a 49 fewer number of recurrences per thousand patients compared with other modalities (OR: 0.28-0.57, CI 95%). It also had a reduction in 175 cases of discharge or haemorrhage per thousand patients compared with other modalities (OR: 0.25, 95% CI: 0.14-0.45). However, we found that TCA- and NaOH-based matricectomies fared better compared with phenol in incidence of postoperative discharge and haemorrhage. Patients also experienced less pain (257 fewer number per 1000, OR: 0.52, 95% CI: 0.43-0.63). Nearly, half of the included studies had some concerns about the risk of bias. As of now, phenol matricectomy combines a low recurrence rate with favourable adverse effect profile and is the preferred modality for matricectomy in grade II and III onychocryptosis.

Impact of simplifications on numerical modelling of the shallow subsurface at city-scale and implications for shallow geothermal potential.

Anthropogenic infrastructures in the shallow subsurface, such as heated basements, tunnels or shallow geothermal systems, are known to increase ground temperatures, particularly in urban areas. Numerical modelling helps inform on the extent of thermal influence of such structures, and its potential uses. Realistic modelling of the subsurface is often computationally costly and requires large amounts of data which is often not readily available, necessitating the use of modelling simplifications. This work presents a case-study on the city centre of Cardiff, UK, for which high resolution data is available, and compares modelling results when three key modelling components (namely ground elevation, hydraulic gradient distribution and basement geometry) are implemented either 'realistically', i.e. with high resolution data, or 'simplified', utilising commonly accepted modelling assumptions. Results are presented at a point (local) scale and at a domain (aggregate) scale to investigate the impacts such simplifications have on model outputs for different purposes. Comparison to measured data at individual locations shows that the accuracy of temperature outputs from numerical models is largely insensitive to simplification of the hydraulic gradient distribution implemented, while changes in basement geometry affect accuracy of the mean temperature predicted at a point by as much as 3.5 °C. At the domain scale, ground temperatures within the first 20 m show a notable increase (approximately 1 °C volume-averaged and 0.5 °C surface-averaged), while the average heat flux over the domain is about 0.06 W/m2 at 20 m depth. These increased temperatures result in beneficial conditions for shallow geothermal utilisation, producing drilling cost savings of around £1700 per typical household system or about 9% increase in thermal energy potential. Simplifications of basement geometry and (to a lesser degree) the hydraulics can result in an overestimation of these temperatures and therefore over-predict geothermal potential, while the elevation simplification showed little impact.

Sustainability, productivity, profitability and soil health with conservation agriculture based sustainable intensification of oilseed brassica production system.

Conservation agriculture (CA) practices are getting space world-wide to answer many emerging challenges like; declining factor productivity, deteriorating soil health, water scarcity, climate change, and farm profitability and sustainability. Oilseed brassica (Indian mustard, Brassica juncea L.), a winter oilseed grown under rainfed agro-ecosystem is vulnerable to low yields, high production cost, degrading soil and water quality, and climatic vagaries. The present study was undertaken on CA-based sustainable intensification of Indian mustard for enhancing inputs efficiencies, farm profitability and sustainability. Permanent beds with residue retention (PB + R) improved mustard equivalent yield (11.4%) and system grain yield (10.6%) compared with conventional tillage without residue (CT - R). Maize-mustard rotation (Mz-M) increased system grain yield (142.9%) as well as mustard equivalent yield (60.7%) compared with fallow-mustard (F-M). Mz-M system under PB + R increased sustainable yield index (376.5%), production efficiency (177.2%), economic efficiency (94%) and irrigation water productivity (66%) compared with F-M under CT - R. PB + R increased soil organic carbon (SOC) stock at 0-15 cm (17.7%) and 15-30 cm (29.5%) soil depth compared with CT - R. Addition of green gram in rotation with mustard improved SOC at 0-15 cm (27.4%) and 15-30 cm (20.5%) compared with F-M system. CA-based cluster bean-mustard/GG-M system increased N productivity, whereas, P and K productivity improved with Mz-M system compared with F-M under CT - R. Thus, CA-based Mz-M system should be out-scaled in the traditional rainfed fallow-mustard system to improve the farm production and income on holistic basis to make the country self-sufficient in edible oils.

Hypogalactia in mammary quarters adjacent to lipopolysaccharide-infused quarters is associated with transcriptional changes in immune genes.

Infusion of lipopolysaccharides (LPS) into a mammary gland can provoke inflammatory responses and impair lactation in both the infused gland and neighboring glands. To gain insight into the mechanisms controlling the spatiotemporal response to localized mastitis in lactating dairy cows, we performed RNA sequencing on mammary tissue from quarters infused with LPS, neighboring quarters in the same animals, and control quarters from untreated animals at 3 and 12 h postinfusion. Differences in gene expression were annotated to Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Comparing mammary transcriptomes from all 3 treatments revealed 3,088 and 1,644 differentially expressed (DE) genes at 3 and 12 h, respectively. Of these genes, >95% were DE only in LPS-infused quarters and represented classical responses to LPS: inflammation, apoptosis, tissue remodeling, and altered cell signaling and metabolism. Although relatively few genes were DE in neighboring quarters (56 at 3 h; 74 at 12 h), these represented several common pathways. At 3 h, tumor necrosis factor (TNF), nuclear factor-κB, and nucleotide-binding and oligomerization domain (NOD)-like receptor signaling pathways were identified by the upregulation of anti-inflammatory (NFKBIA, TNFAIP3) and cell adhesion molecule (VCAM1, ICAM1) genes in neighboring glands. Additionally, at 12 h, several genes linked to 1-carbon and serine metabolism were upregulated. Some responses were also regulated over time. The proinflammatory response in LPS-infused glands diminished between 3 and 12 h, indicating tight control over transcription to re-establish homeostasis. In contrast, 2 glucocorticoid-responsive genes, FKBP5 and ZBTB16, were among the top DE genes upregulated in neighboring quarters at both time points, indicating potential regulation by glucocorticoids. We conclude that a transient, systemic immune response was sufficient to disrupt lactation in neighboring glands. This response may be mediated directly by proinflammatory factors from the LPS-infused gland or indirectly by secondary factors released in response to systemic inflammatory signals.

Mixed Mott-Hubbard and charge transfer nature of 4H-SrMnO3thin film on Si (100).

Room temperature electronic structure of polycrystalline 4H-SrMnO3thin film grown on Si (100) substrate has been studied using resonance photo emission spectroscopy and soft x-ray absorption spectroscopy measurements. Presence of charge transfer screen Mn 3dnLfinal state along with the 3dn-1final state at the valence band edge of 4H-SrMnO3thin film confirms that the ground state is strongly mixed between Mn 3dand O 2pstates. The estimated equivalent values of on-site Coulomb interaction energy (U) and O 2pto Mn 3d- charge transfer energy (Δ) (U≈ Δ ≈ 4.8 eV) from the combination of occupied and unoccupied spectra further confirm the intermediate Mott-Hubbard and charge transfer insulator nature of 4H-SrMnO3film. Despite having similar Mn 4+ valence state in 4H-SrMnO3and cubic SrMnO3, 4H phase is observed to reveal much higher band gap ∼1.5 eV than the cubic phase (0.3 eV), which arises due to different MnO6octahedra environment.

Evolution from sinusoidal to collinear A-type antiferromagnetic spin-ordered magnetic phase transition in Tb1-xPrxMnO3solid solution.

The present study reports on the structural and magnetic phase transitions in Pr-doped polycrystalline Tb0.6Pr0.4MnO3, using high-resolution neutron powder diffraction (NPD) collected at SINQ spallation source, to emphasize the suppression of the sinusoidal magnetic structure of pure TbMnO3and the evolution to a collinear A-type antiferromagnetic ordering. The phase purity, Jahn-Teller distortion, and one-electron bandwidth for egorbital of Mn3+cation have been calculated for polycrystalline Tb0.6Pr0.4MnO3,in comparison to the parent materials TbMnO3and PrMnO3, through the Rietveld refinement study from x-ray diffraction data at room temperature, which reveals the GdFeO3type orthorhombic structure of Tb0.6Pr0.4MnO3havingPnmaspace group symmetry. The temperature-dependent zero field-cooled and field-cooled dc magnetization study at low temperature down to 5 K reveals a variation in the magnetic phase transition due to the effect of Pr3+substitution at the Tb3+site, which gives the signature of the antiferromagnetic nature of the sample, with a weak ferromagnetic component at low temperature-induced by an external magnetic field. The field-dependent magnetization study at low temperatures gives the weak coercivity having the order of 2 kOe, which is expected due to the canted-spin arrangement or ferromagnetic nature of Terbium ordering. The NPD data for Tb0.6Pr0.4MnO3confirms that the nuclear structure of the synthesized sample maintains its orthorhombic symmetry down to 1.5 K. Also, the magnetic structures have been solved at 50 K, 25 K, and 1.5 K through the NPD study, which shows an A-type antiferromagnetic spin arrangement having the magnetic space groupPn'ma'.

Intramammary lipopolysaccharide infusion induces local and systemic effects on milk components in lactating bovine mammary glands.

Each quarter of the bovine mammary gland is an anatomically and functionally distinct gland. However, mastitis in one quarter may affect function of adjacent, uninfected glands. To investigate the mechanisms and potential mediators of these effects, we quantified early responses of the mammary gland to intramammary lipopolysaccharide (LPS) challenge, distinguishing between local and systemic effects. Ten multiparous cows over 70 d in milk were blocked into pairs by breed, cow-level somatic cell count (SCC), and milk yield. Within block, one cow was assigned to LPS treatment (T) such that both the front and the rear quarter of a randomly selected udder half received an infusion of 50 µg of LPS in 10 mL of saline (T-L); the contralateral quarters received only 10 mL of saline (T-S). Similarly, each paired control cow (C) received either 10 mL of saline (C-S) or no infusion (C-N) into udder halves. Cows were quarter milked twice daily, with foremilk samples (∼30 mL, front quarters) taken at -24, 0, 3, 6, 12, and 24 h relative to infusions. At 24 h, average milk yield in T-L and T-S quarters fell to 23 and 32% of pre-infusion levels, respectively. For T cows, systemic effects were observed by 3 h post-infusion as rectal temperature was elevated and foremilk fat concentration was reduced in both T-L and T-S. However, SCC and concentrations of l-lactate and total protein in foremilk indicated a local response to LPS: protein was transiently higher at 3 h, whereas SCC and lactate were higher at 6 h in T-L compared with T-S. Lactose concentration showed a local effect at 6 h, being lower in T-L than in T-S, and then a systemic effect at 12 h, being lower in both T-L and T-S than C quarters. Concomitant with changes in milk, systemic effects were also observed in blood. Plasma antioxidant potential and glucose concentration were lower in T cows than in C cows at 6 or 12 h, respectively, although neither variable remained different at 24 h. In summary, unilateral LPS infusion induced distinct, time-dependent effects on each milk component. Depending on the component, effects were local, systemic, or both, suggesting involvement of multiple different mediators that collectively result in systemic inhibition of milk production.

Potential use of hydroxychloroquine, ivermectin and azithromycin drugs in fighting COVID-19: trends, scope and relevance.

Alarming situation has been caused due to the emergence of COVID-19 infection around the world. There is an urgency of developing a therapeutic strategy in order to control the spread of COVID-19. Towards that initiative, potential drugs like hydroxychloroquine, ivermectin and azithromycin have been tested by diverse group of researchers worldwide for their potential against novel coronavirus. The present report presents together the comprehensive knowledge derived from the major researches about the above drugs altogether in context of the current health emergency around the world. Hydroxychloroquine and ivermectin were known to act by creating the acidic environment and inhibiting the importin (IMPα/ß1) mediated viral import. Azithromycin was found to act similar to the hydroxychloroquine as an acidotropic lipophilic weak base. All the three categories of drugs seemed to potentially act against novel coronavirus infection. However, their efficacies need to be studied in detail individually and in combination in-vivo in order to combat COVID-19 infection.

Role of Ni substitution on structural, magnetic and electronic properties of epitaxial CoCr2O4 spinel thin films.

Cubic spinel CoCr2O4 has recently attained attention due to its multiferroic properties. However, the Co site substitution effect on the structural and magnetic properties has rarely been studied in thin film form. In this work, the structural and magnetic properties of Co1-x Ni x Cr2O4 (x= 0, 0.5) epitaxial thin films deposited on MgAl2O4 (100) and MgO (100) substrates to manipulate the nature of strain in the films using pulsed laser deposition (PLD) technique are presented. The epitaxial nature of the films was manifested through x-ray diffraction (XRD), reciprocal space mapping (RSM) and Rutherford backscattering spectrometry (RBS) measurements. Raman measurements revealed a disappearance of characteristic A 1 g and F 2 g modes of the CoCr2O4 with increase in the Ni content. Atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM) studies show a modification of the surface morphology upon Ni substitution. Magnetic measurements disclose that the ferrimagnetic Curie temperature (T C) of the CoCr2O4 in thin film grown on MgAl2O4 (100) and MgO (100) substrates were found to be 100.6 ± 0.5 K and 93.8 ± 0.2 K, respectively. With Ni substitution the T C values were found to be enhanced to 104.5 ± 0.4 K for MgAl2O4 (100) and 108.5 ± 0.6 K for MgO (100) substrates. X-ray photoelectron spectroscopy (XPS) suggests Cr3+ oxidation states in the films, while Co ions are present in a mixed Co2+/Co3+ oxidation state. The substitution of Ni at Co site significantly modifies the line shape of the core level as well as the valence band. Ni ions are also found to be in a mixed 2+/3+ oxidation state. O 1s core level display asymmetry related to possible defects like oxygen vacancies in the films.