Paper-Based Supercapacitive Pressure Sensor for Wrist Arterial Pulse Waveform Monitoring.

Recent developments in wearable pressure sensors have led to the need for high sensitivity and a broad sensing range to accurately detect various physiological states. However, high sensitivity does not always translate to a wide sensing range, and manufacturing sensors with such high sensitivity is a complex and expensive process. In this study, we present a capacitive pressure sensor based on tissue paper that is simple to produce and cost-effective yet still exhibits high linear sensitivity of 2.9 kPa-1 in the 0-16 kPa range. The linear sensitivity of 1.5 kPa-1 was achieved from 16 to 90 kPa. The sensor also demonstrated a fast response time of 0.2 s, excellent pressure resolution at both low and high pressures, and a sufficient signal-to-noise ratio, making it ideal for detecting wrist arterial pulse waveforms. We were also able to demonstrate the sensor's practicality in real-world applications by cycling it 5000 times and showing its capability to capture pulse waveforms from different arterial locations. These low-cost sensors possess all the intrinsic features necessary for efficient measurement of pulse waveforms, which may facilitate the diagnosis of cardiovascular diseases.

Monitoring and analysis of cardiovascular pulse waveforms using flexible capacitive and piezoresistive pressure sensors and machine learning perspective.

The growing interest in flexible electronics for physiological monitoring, particularly using flexible pressure sensors for cardiovascular pulse waveforms monitoring, has potential applications in cuffless blood pressure measurement and early diagnosis of cardiovascular disease. High sensitivity, fast response time, good pressure resolution and a high signal-to-noise ratio are essential for effective pulse waveform detection. This review focuses on flexible capacitive and piezoresistive pressure sensors, which have seen significant enhancements due to their simple operation, superior performance, wide range of materials, and easy fabrication. The comparison of sensing methods for acquiring pulse waveforms from the wrist artery, device integration configurations, high-quality pulse waveforms collection, and performance analysis of capacitive and piezoresistive sensors are discussed. The review also covers the use of machine learning for analyzing pulse waveforms for cardiovascular disease diagnosis and cuff-less blood pressure monitoring. Lastly, it provides perspectives on current challenges and further advancements in the field.

Nano-Confined Tin Oxide in Carbon Nanotube Electrodes via Electrostatic Spray Deposition for Lithium-Ion Batteries.

The development of novel materials is essential for the next generation of electric vehicles and portable devices. Tin oxide (SnO2), with its relatively high theoretical capacity, has been considered as a promising anode material for applications in energy storage devices. However, the SnO2 anode material suffers from poor conductivity and huge volume expansion during charge/discharge cycles. In this study, we evaluated an approach to control the conductivity and volume change of SnO2 through a controllable and effective method by confining different percentages of SnO2 nanoparticles into carbon nanotubes (CNTs). The binder-free confined SnO2 in CNT composite was deposited via an electrostatic spray deposition technique. The morphology of the synthesized and deposited composite was evaluated by scanning electron microscopy and high-resolution transmission electron spectroscopy. The binder-free 20% confined SnO2 in CNT anode delivered a high reversible capacity of 770.6 mAh g-1. The specific capacity of the anode increased to 1069.7 mAh g-1 after 200 cycles, owing to the electrochemical milling effect. The delivered specific capacity after 200 cycles shows that developed novel anode material is suitable for lithium-ion batteries (LIBs).

Wearable Capacitive Pressure Sensor for Contact and Non-Contact Sensing and Pulse Waveform Monitoring.

Sensitive and flexible pressure sensors have invoked considerable interest for a broad range of applications in tactile sensing, physiological sensing, and flexible electronics. The barrier between high sensitivity and low fabrication cost needs to be addressed to commercialize such flexible pressure sensors. A low-cost sacrificial template-assisted method for the capacitive sensor has been reported herein, utilizing a porous Polydimethylsiloxane (PDMS) polymer and a multiwalled carbon nanotube (MWCNT) composite-based dielectric layer. The sensor shows high sensitivity of 2.42 kPa-1 along with a low limit of detection of 1.46 Pa. The high sensitivity originates from adding MWCNT to PDMS, increasing the composite polymer's dielectric constant. Besides this, the pressure sensor shows excellent stability at a cyclic loading of 9000 cycles, proving its reliability for long-lasting application in tactile and physiological sensing. The high sensitivity of the sensor is suitable for the detection of small deformations such as pulse waveforms as well as tactile pressure sensing. In addition, the paper demonstrates a simultaneous contact and non-contact sensing capability suitable for dual sensing (pressure and proximity) with a single data readout system. The dual-mode sensing capability may open opportunities for realizing compact systems in robotics, gesture control, contactless applications, and many more. The practicality of the sensor was shown in applications such as tactile sensing, Morse code generator, proximity sensing, and pulse wave sensing.

Design Rules for a Wearable Micro-Fabricated Piezo-Resistive Pressure Sensor.

Wearable flexible piezo-resistive pressure sensors hold a wide-ranging potential in human health monitoring, electronic skin, robotic limbs, and other human-machine interfaces. Out of the most successful recent efforts for arterial pulse monitoring are sensors with micro-patterned conductive elastomers. However, a low-current output signal (typically in the range of nano-amperes) and bulky and expensive measurement equipment for useful signal acquisition inhibits their wearability. Herein, through a finite element analysis we establish the design rules for a highly sensitive piezo-resistive pressure sensor with an output that is high enough to be detectable by simple and inexpensive circuits and therefore ensure wearability. We also show that, out of four frequently reported micro-feature shapes in micro-patterned piezo-resistive sensors, the micro-dome and micro-pyramid yield the highest sensitivity. Furthermore, investigations of different conductivity values of micro-patterned elastomers found that coating the elastomer with a conductive material (usually metallic) leads to higher current response when compared to composited conductive elastomers. Finally, the geometric parameters and spatial configurations of micro-pyramid design of piezo-resistive sensors were optimized. The results show that an enhanced sensitivity and higher current output is achieved by the lower spatial density configuration of three micro-features per millimeter length, a smaller feature size of around 100 µm, and a 60-50 degrees pyramid angle.